Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TAPE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Atmospheric environment for Space Shuttle (STS-31) launch

A summary of selected atmospheric conditions observed near space shuttle STS-31 launch time on April 24, 1990, at Kennedy Space Center, Florida, are presented. Values of ambient pressure, temperature, moisture, ground winds, visual observations (clouds), and winds aloft are included. The sequence of pre-launch Jimsphere-measured vertical wind profiles is also presented. The final atmospheric tape, which consists if wind and thermodynamic parameters versus altitude, for STS-31 vehicle ascent was constructed. The STS-31 ascent atmospheric data tape was constructed to provide an internally consistent data set for use in postflight performance assessments and represent the best estimated of the launch environment to the 400,000 feet altitude that was traversed by the STS-31 vehicle.

Jasper, G. L.↗
NASA NTRS1990

Atmospheric environment for space shuttle (STS-36) launch

A summary of selected atmospheric conditions observed near space shuttle STS-36 launch time on February 28, 1990, at Kennedy Space Center, Florida was presented. STS-36 carried a Department of Defense payload and the flight azimuth is not known. Values of ambient pressure, temperature, moisture, ground winds, visual observations (cloud), and winds aloft are included. The sequence of pre-launch Jimsphere-measured vertical wind profiles is given. The final atmospheric tape, which consists of wind and thermodynamic parameters versus altitude, for STS-36 vehicle ascent was constructed. The STS-36 ascent atmospheric data tape was constructed to provide an internally consistent data set for use in postflight performance assessments and represent the best estimate of the launch environment to the 400,000 feet altitude that was traversed by the STS-36 vehicle.

Jasper, G. L.↗
NASA NTRS1990

A study of marine stratocumulus using lidar and other FIRE aircraft observations

The National Center for Atmospheric Research (NCAR) airborne infrared lidar system (NAILS) used in the 1987 First ISCCP Regional Experiment (FIRE) off the coast of California is a 10.6 microns wavelength carbon dioxide lidar system constructed by Ron Schwiesow and co-workers at NCAR. The lidar is particularly well suited for detailed observations of cloud shapes; i.e., height of cloud top (when flying above cloud and looking down) and cloud base (when flying below cloud and looking up) along the flight path. A brief summary of the lidar design characteristics is given. The lidar height resolution of plus or minus 3 m allows for the distance between the aircraft and cloud edge to be determined with this accuracy; however, the duration of the emitted pulse is approximately 3 microseconds, which corresponds to a 500 m pulse length. Therefore, variations in backscatter intensities within the clouds can normally not be resolved. Hence the main parameter obtainable from the lidar is distance to cloud; in some cases the cloud depth can also be determined. During FIRE the lidar was operational on 7 of the 10 Electra flights, and data were taken when the distance between cloud and aircraft (minimum range) was at least 500 m. The lidar was usually operated at 8 Hz, which at a flight speed of 100 m s(-1) translates into a horizontal resolution of about 12 m. The backscatter as function of time (equivalent to distance) for each laser pulse is stored in digital form on magnetic tape. Currently, three independent variables are available to the investigators on the FIRE Electra data tapes: lidar range to cloud, strength of return (relative power), and pulse width of return, which is related to penetration depth.

Jensen, Jorgen B.↗
NASA NTRS1990

NSSDC: Preserving time with technological advances

The National Space Science Data Center (NSSDC) has always striven to use the best methods and media currently available from data accessibility and archive management. The various advantages and disadvantages of four different media forms that have been used by NSSDC over 12 years of archiving and distributing of International Ultraviolet Explorer (IUE) data are discussed. The four media are nine track magnetic tape, IBM 3850 mass storage, Memorex 3480 18 track tape catridge, and the Sony 6.5 Gbyte Century optical disk. The CD-ROM medium is also discussed.

Perry, Charleen↗
NASA NTRS1990

Atmospheric environment for space shuttle (STS-41) launch

A summary of selected atmospheric conditions observed near space shuttle STS-41 launch time on October 6, 1990, at Kennedy Space Center, Florida are presented. Values of ambient pressure, temperature, moisture, ground winds, visual observations (clouds), and winds aloft are included. The sequence of prelaunch Jimsphere-measured vertical wind profiles is given. The final atmospheric tape, which consists of wind and thermodynamic parameters versus altitude, for STS-41 vehicle ascent was constructed. The STS-41 ascent atmospheric data tape was constructed by Marshall Space Flight Center's Earth Science and Applications Division to provide an internally consistent data set for use in postflight performance assessments and represents the best estimate of the launch environment to the 400,000 ft altitude that was traversed by the STS-41 vehicle.

Jasper, G. L.↗
NASA NTRS1991

Online NASTRAN documentation

The distribution of NASTRAN User Manual information has been difficult because of the delay in printing and difficulty in identification of all the users. This has caused many users not to have the current information for the release of NASTRAN that could be available to them. The User Manual updates have been supplied with the NASTRAN Releases, but distribution within organizations was not coordinated with access to releases. The Executive Control, Case Control, and Bulk Data sections are supplied in machine readable format with the 91 Release of NASTRAN. This information is supplied on the release tapes in ASCII format, and a FORTRAN program to access this information is supplied on the release tapes. This will allow each user to have immediate access to User Manual level documentation with the release. The sections on utilities, plotting, and substructures are expected to be prepared for the 92 Release.

Turner, Horace Q.↗
NASA NTRS1991

Atmospheric environment for space shuttle (STS-38) launch

A summary of selected atmospheric conditions observed near space shuttle STS-38 launch time on November 15, 1990, at Kennedy Space Center is presented. STS-38 carried a Department of Defense payload and the flight azimuth in this report will be denoted by a reference flight azimuth, since the actual flight azimuth is not known. Values of ambient pressure, temperature, moisture, ground winds, visual observation (cloud), and winds aloft are included. The sequence of prelaunch Jimsphere-measured vertical wind profiles is presented. The final atmospheric tape, which consists of wind and thermodynamic parameters versus altitude, for STS-38 vehicle ascent was constructed. The STS-38 ascent atmospheric data tape was constructed by Marshall Space Flight Center's Earth Science and Applications Division to provide an internally consistent data set for use in postflight performance assessments and represents the best estimate of the launch environment to the 400,000-ft altitude that was traversed by the STS-38 vehicle.

Jasper, G. L.↗
NASA NTRS1991

Flame-retardant composite materials

The properties of eight different graphite composite panels fabricated using four different resin matrices and two types of graphite reinforcement are described. The resin matrices included: VPSP/BMI, a blend of vinylpolystyryl pyridine and bismaleimide; BMI, a bismaleimide; and phenolic and PSP, a polystyryl pyridine. The graphite fiber used was AS-4 in the form of either tape or fabric. The properties of these composites were compared with epoxy composites. It was determined that VPSP/BMI with the graphite tape was the optimum design giving the lowest heat release rate.

Kourtides, Demetrius A.↗
NASA NTRS1991

A field-deployable digital acoustic measurement system

A field deployable digital acoustic measurement system was developed to support acoustic research programs at the Langley Research Center. The system digitizes the acoustic inputs at the microphone, which can be located up to 1000 feet from the van which houses the acquisition, storage, and analysis equipment. Digitized data from up to 12 microphones is recorded on high density 8mm tape and is analyzed post-test by a microcomputer system. Synchronous and nonsynchronous sampling is available with maximum sample rates of 12,500 and 40,000 samples per second respectively. The high density tape storage system is capable of storing 5 gigabytes of data at transfer rates up to 1 megabyte per second. System overall dynamic range exceeds 83 dB.

Gray, David L.↗
NASA NTRS1991

Use of the Long Duration Exposure Facility's thermal measurement system for the verification of thermal models

Results are presented of the comparison between the Long Duration Exposure Facility (LDEF) Thermal Measurements Systems (THERM) recorded temperature data and the predicted values as calculated prior to the LDEF deployment. The postflight thermal model was verified and calculated temperature uncertainties were reduced to under + or - 18 F from the preflight uncertainties of + or - 40 F. The THERM consisted of 8 temperature sensors, a shared tape recorder, a standard LDEF flight battery, and an electronics control box. The temperatures were measured at selected locations on the LDEF structure interior during the first 490 days of flight and recorded for postflight analysis. After the recorder was recovered from space, the tape recorder was recovered and the data reduced for comparison to the LDEF predicted temperatures. By comparing the calculated values to the measured data, a verified thermal model that presents the best agreement with the THERM data was obtained. The THERM experiment provided an economical way of performing a postflight verification of the LDEF Thermal Model by recording a limited number of flight temperatures on typical locations of the LDEF structure.

Berrios, William M.↗
NASA NTRS1991

Atmospheric environment for space shuttle (STS-35) launch

A summary is given of selected atmospheric conditions observed near space shuttle STS-35 launch time on December 2, 1990, at Kennedy Space Center, Florida. Values of ambient pressure, temperature, moisture, ground winds, visual observations (cloud), and winds aloft are included. The sequence of prelaunch Jimsphere-measured vertical wind profiles is given in this report. The final atmospheric tape, which consists of wind and thermodynamic parameters versus altitude, for STS-35 vehicle ascent has been constructed. The STS-35 ascent atmospheric data tape has been constructed by Marshall Space Flight Center's Earth Science and Applications Division to provide an internally consistent data set for use in postflight performance assessments and represents the best estimate of the launch environment to the 400,000-ft altitude that was traversed by the STS-35 vehicle.

Jasper, G. L.↗
NASA NTRS1991

Lightweight ceramic components for propulsion applications

It is demonstrated that two ceramic engine components of reduced weight can be efficiently produced and employed at higher combustion gas temperatures. The engine components, containing internal cooling and hydraulic passages, are fabricated in a process involving platelet technology, tape casting, and multilayer ceramic packaging techniques. Traditional metal platelet design techniques are used to fabricate components from ceramic tape which are then laminated and processed to densities of close to 100 percent. A methane cooled regenerator for an air turbo ramjet engine and a rocket engine bipropellant injector are fabricated from silicon nitride. The two components are tested under conditions similar to the pressurization, thrusts, and temperatures encountered in a combustion gas environment. The survivability and leak-free nature of the components demonstrate that more complex ceramic engine components can be fabricated using these techniques.

Franklin, J. E.↗
NASA NTRS1992

Simple Method For Detection Of Intergranular Attack

Evidence of intergranular attack occurring on chemically milled and wire-electrical-discharge-machined metal parts detected with replicating tape which makes it unnecessary to manufacture and stock test coupons and inspect them microscopically. Tape pressed on part to be inspected. When removed, it presents visual evidence of intergranular attack.

Jackson, Amy A.↗
NASA NTRS1992

Generating Multiple Calibrating Voltages Simultaneously

Calibrating unit containing signal generator controlled by microprocessor puts out ac signals of known voltages on fifty channels simultaneously. Signals used to calibrate high-frequency tape recorder channels for multiple, ac-coupled strain gauges simultaneously. Calibrating voltage required on each tape channel determined by remote computer, and corresponding data and commands transmitted to microprocessor via modems.

Dutreix, Lionel J.↗
NASA NTRS1991

Atmospheric environment for Space Shuttle (STS-37) launch

A summary of selected atmospheric conditions observed near Space Shuttle STS-37 launch time on 5 Apr. 1991 at KSC is presented. Values of ambient pressure, temperature, moisture, ground winds, visual observations (clouds), and winds aloft are included. The sequence of prelaunch Jimsphere-measured vertical wind profiles is given. The final atmospheric tape, which consists of wind and thermodynamic parameters versus altitude, for STS-37 vehicle ascent was constructed. The STS-37 ascent atmospheric data tape was constructed by Marshall Space Flight Center's Earth Science and Applications Division to provide an internally consistent data set for use in postflight performance assessments and represents the best estimate of the launch environment to the 400,000 ft. altitude that was traversed by the STS-37 vehicle.

Jasper, G. L.↗
NASA NTRS1992

Long duration exposure facility post-flight thermal analysis, part 1

Results of the post-flight thermal analysis of the Long Duration Exposure Facility (LDEF) mission are presented. The LDEF mission thermal analysis was verified by comparing the thermal model results to flight data from the LDEF Thermal Measurements System (THERM). Post-flight calculated temperature uncertainties have been reduced to under +/- 18 F from the pre-flight uncertainties of +/- 40 F. The THERM consisted of eight temperature sensors, a shared tape recorder, a standard LDEF flight battery, and an electronics control box. The temperatures were measured at selected locations on the LDEF structure interior during the first 390 days of flight and recorded for post-flight analysis. After the LDEF retrieval from Space on 12 Jan. 1990, the tape recorder was recovered from the spacecraft and the data reduced for comparison to the LDEF predicted temperatures. The LDEF mission temperatures were calculated prior to the LDEF deployment on 7 Apr. 1980, and updated after the LDEF retrieval with the following actual flight parameter data: including thermal fluxes, spacecraft attitudes, thermal coatings degradation, and contamination effects. All updated data used for the calculation of post-flight temperatures is also presented in this document.

Berrios, William M.↗
NASA NTRS1992

Long duration exposure facility post-flight thermal analysis, part 2

Results of the post-flight thermal analysis for the Long Duration Exposure Facility (LDEF) mission are presented. The LDEF mission thermal analysis was verified by comparing the thermal model results to flight data from the LDEF Thermal Measurements System (THERM). Post-flight calculated temperature uncertainties have been reduced to under +/- 18 F from the pre-flight uncertainties of +/- 40 F. The THERM consisted of eight temperature sensors, a shared tape recorder, a standard LDEF flight battery, and an electronics control box. The temperatures were measured at selected locations on the LDEF structure interior during the first 390 days of flight and recorded for post-flight analysis. After the LDEF retrieval from Space on 12 Jan. 1990, the tape recorder was recovered from the spacecraft and the data reduced for comparison to the LDEF predicted temperatures. The LDEF mission temperatures were calculated prior to the LDEF deployment on 7 Apr. 1980, and updated after the LDEF retrieval with the following actual flight parameter data: thermal fluxes, spacecraft attitudes, thermal coatings degradation, and contamination effects. All updated data used for calculation of post-flight temperatures is also presented in this document.

Berrios, William M.↗
NASA NTRS1992

Atmospheric environment for Space Shuttle Atlantis (STS-39) launch

A summary is presented of selected atmospheric conditions observed near space shuttle Atlantis STS-39 launch time on 28 April 1991, at Kennedy Space Center, FL. Values of ambient pressure, temperature, moisture, ground winds, visual observations (cloud), and winds aloft are included. The sequence of prelaunch Jimsphere measured vertical wind profiles is given. The final atmospheric tape, which consists of wind and thermodynamic parameters versus altitude, for STS-39 vehicle ascent was constructed. The STS-39 ascent atmospheric data tape was constructed by NASA-Marshall to provide an internally consistent data set for use in postflight performance assessments and represents the best estimate of the launch environment to the 400,000 ft altitude that was traversed by the STS-39 vehicle.

Jasper, G. L.↗