Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Distinctive rheological and temporal viscoelastic behaviour of alkali-activated fly ash/slag pastes: A comparative study with cement paste

This paper presents the results of the investigation on the fundamental differences in the viscoelasticity between alkali-activated fly ash/slag materials (AAMs) and cement pastes. The effects of the precursor and the activator on the rheological behaviour of AAM pastes were studied. Given the specific precursor, the activator viscosity significantly affected the AAM paste viscosity. The high viscous activator increased the plastic viscosity of AAM pastes by 4–8 times higher than that of cement paste and drastically decreased the yield stress due to viscous effects and weak colloidal interactions. Temporal changes in viscoelasticity showed that the negligible colloidal interactions between particles in AAM paste made the system non-percolated until the initial setting. This resulted in very different viscoelastic behaviour compared to the one from the well-percolated network in cement paste. Considering all results obtained in this study, the paper describes the short-term evolution of the AAM paste from the fresh condition to the initial setting.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Molecular dynamics and experimental study on the adhesion mechanism of polyvinyl alcohol (PVA) fiber in alkali-activated slag/fly ash

This paper aims to study the adhesion mechanism of polyvinyl alcohol (PVA) fiber within alkali-activated slag/fly ash (AASF) matrix using molecular dynamics (MD) simulation in combination with systematic experimental characterization. The adhesion of PVA to C-(N-)A-S-H gel with different Ca/(Si+Al) and Al/Si ratios was modeled using MD simulation, with the related adsorption enthalpy calculated and the adhesion mechanism explored. The experimentally attained chemical bonding energy of PVA fiber in AASF coincides well with the simulation results. In both cases, the adhesion enhances primarily with increasing Ca/(Si+Al) ratio of C-(N-)A-S-H gel. Additionally, MD simulation indicates preferential element distributions of Ca around PVA molecule, which was confirmed experimentally by the detection of the Ca-rich C-(N-)A-S-H gel in the interfacial transition zone (ITZ). }This study provides further insights into the adhesion mechanism of PVA fiber to C-(N-)A-S-H gel formed in AASF, which is particularly valuable for the future development of PVA-based high-performance alkali-activated composites.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A parametric study of accelerated carbonation in alkali-activated slag

Resistance to carbonation is one important attribute that low-CO{sub 2} cement alternatives must possess, and is particularly crucial for cement alternatives subjected to aggressive CO{sub 2} concentrations such as those used in construction of oil wells and wells for below ground carbon sequestration. Here, a parametric study of alkali-activated slag (AAS) carbonation in aggressive environments has been conducted to examine (i) calcium carbonate polymorphism using X-ray diffraction (XRD) and Fourier-transform infrared (FTIR) spectroscopy, and (ii) the extent of calcium carbonate formation and CO{sub 2} adsorption using thermogravimetric analysis (TGA). A range of AASs have been studied by varying the magnesium content of the slag, the activator type (sodium hydroxide and sodium silicate), the activator concentration, and the curing time prior to carbonation. It was uncovered that both (i) magnesium from the slag and (ii) silica from the activating solution are needed to reduce the propensity for the sodium-containing calcium-alumino-silicate-hydrate gel to undergo decalcification.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Simultaneous x-ray and neutron 4D tomographic study of drying-driven hydro-mechanical behavior of cement-based materials at moderate temperatures

The drying of cement-based materials is intimately related to their durability, which has significant economic, social and environmental repercussions. The evolution of the saturation of the pore network and the associated drying shrinkage are in fact leading causes of cracking and of the ensuing penetration of aggressive chemicals. This process is highly heterogeneous, due to the thermo-hydric spatial gradients developing in the material from the exposed surfaces to its core and because of local effects, driven by the intrinsically heterogeneous micro-structure (e.g., by the distribution of pores and aggregates). It follows that macroscopic, sample-scale measurements cannot fully disclose the complexity of the underlying processes. In the last few decades, significant advances in full-field techniques have allowed an unprecedented insight into these local processes. For cement-based materials, x-ray and neutron tomography lend themselves as ideal, and highly complementary, tools for the study of their thermo-hydro-mechanical behavior. Notably, the high sensitivity to density variations of x-ray imaging gives access to the developments of fractures, in 4D (3D + time). On the other hand, neutron tomography allows the study of the evolution of the moisture field in 4D, thanks to its high hydrogen sensitivity. The combination of these two techniques provides a unique insight in thermo-hydro-mechanical couplings, e.g., the effect of cracks on the water content field. This contribution presents novel 5D datasets (3D tomographies along time, plus truly simultaneous x-ray and Neutron rapid acquisitions) in-operando of a cement paste and of a concrete sample heated at moderate temperatures (up to 140{sup ∘}C). The analysis of this 5D data-set (once aligned in time and across modalities) allows for example a quantification of the 4D moisture profiles which were found to predict an overall water loss at hydric equilibrium coherent with the corresponding analytical analysis. In the cement paste sample, the x-ray dataset captures the evolution of an extensive cracking network, opening and propagation toward the core of the sample. A novel analysis procedure is here proposed which allows the extraction of these fractures and the analysis of their interplay with local drying as captured through neutron imaging. This for example reveals the depth of penetration of drying in the vicinity of the fractures along time, which is essential for the assessment and calibration of hydro-mechanical coupled models.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Molecular dynamics study of carbon dioxide and nitrogen selectivity through poly[bis((methoxyethoxy)ethoxy)phosphazene] (MEEP) membrane

Here, a molecular dynamics simulation model was developed to comprehensively understand carbon dioxide over nitrogen (CO 2 /N 2 ) selectivity through polyphosphazene-based membrane comprising of poly[bis((methoxyethoxy)ethoxy)phosphazene] (MEEP) selective layer at the molecular level. The effects of temperature, pressure, and initial feed gas composition on the CO 2 transport on a polymer membrane were studied. The computed free energy and density profile of the permeating gas mixture exhibited that CO 2 molecules express higher interactions with the membrane than N 2 molecules, resulting in higher CO 2 /N 2 selectivity. Statistical analysis of gas molecules (CO 2 , water (H 2 O), and N 2 ) transportation suggested that hydro- and CO 2 -philic functional groups in the membrane significantly impact CO 2 permeability and CO 2 /N 2 selectivity. This study suggested that Lewis acid–base and hydrogen bonding combinations contribute to CO 2 permeation and CO 2 /N 2 selectivity. An equal CO 2 /N 2 selectivity was observed with and without water vapor in the feed gas suggesting that water does not hinder CO 2 transport through the membrane.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Multistage economic MPC for systems with a cyclic steady state: A gas network case study

Multistage model predictive control (MPC) provides a robust control strategy for dynamic systems with uncertainties and a setpoint tracking objective. Moreover, extending MPC to minimize an economic cost instead of tracking a pre-calculated optimal setpoint improves controller performance. This paper presents a novel multistage economic nonlinear model predictive control (E-NMPC) framework for dynamic systems operating under uncertainty, with specific application to natural gas transmission networks. A key innovation lies in the integration of cyclic steady-state (CSS) constraints within the multistage MPC formulation, enabling the controller to manage periodic operating conditions commonly observed in energy systems. A Lyapunov-based descent condition is enforced to ensure robust stability of the controller. The multistage economic MPC framework is validated on two gas pipeline case studies, where it successfully minimizes net energy consumption, respects operational constraints under uncertain demand profiles, and guides the network to optimal cyclic operation. The Lyapunov function remains bounded in both case studies, validating the robust stability of multistage E-NMPC.

03 NATURAL GAS↗
DOE OSTI2021

Experimental and modeling studies of PR and ND oxalate solubility to high ionic strengths: Insight into actinide(III) oxalates

Actinide oxalates are chemical compounds important to nuclear industry, ranging from actinide separation in waste reprocessing, to production of specialty actinides, and to disposal of high level nuclear waste (HLW) and spent nuclear fuel (SNF). In this study, the solubility constants for Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O by performing solubility experiments in HNO 3 and mixtures of HNO 3 and H 2 C 2 O 4 at 23.0 ± 0.2 °C have been determined. The targeted starting materials, Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O, were successfully synthesized at room temperature using PrCl 3 , NdCl 3 and oxalic acid as the source metrials. Then, we utilized the targeted solubility-controlling phases to conduct solubility measurements. There was no phase change over the entire periods of experiments, demonstrating that Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O were the solubility-controlling phases in our respective experiments. Based on our experimental data, we have developed a thermodynamic model for Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O in the mixtures of HNO 3 and H 2 C 2 O 4 to high ionic strengths. The model for Pr 2 (C 2 O 4 ) 3 •10H 2 O reproduces well the reported experimental data for Pu 2 (C 2 O 4 ) 3 •10H 2 O, which are not utilized for the model development, demonstrating that Pr(III) is an excellent analog for Pu(III). Similarly, the model for Nd 2 (C 2 O 4 ) 3 •10H 2 O reproduces the solubility of Am 2 (C 2 O 4 ) 3 •10H 2 O and Cm 2 (C 2 O 4 ) 3 •10H 2 O. The Pitzer model was used for the calculation of activity coefficients. Based on the published, well established model for dissociation constants for oxalic acid and stability constants for actinide-oxalate complexes [i.e., AmC 2 O 4 + , and Am(C 2 O 4 ) 2 - ] to high ionic strengths, we have obtained the solubility constants (log 10 K 0 ) for the following reactions at 25 °C, Pr 2 (C 2 O 4 ) 3 •10H 2 O ⇌ 2Pr 3+ + 3C 2 O 4 2- + 10H 2 O(l). Nd 2 (C 2 O 4 ) 3 •10H 2 O ⇌ 2Nd 3+ + 3C 2 O 4 2- + 10H 2 O(l). to be -30.82 ± 0.30 (2σ), and - 31.14 ± 0.35 (2σ), respectively. These values for can be directly applied to Pu 2 (C 2 O 4 ) 3 •10H 2 O, Am 2 (C 2 O 4 ) 3 •10H 2 O and Cm 2 (C 2 O 4 ) 3 •10H 2 O. The model established for actinide oxalates by this study provides the needed knowledge with regard to solubilities of actinide/REE oxalates at various ionic strengths, and is expected to find applications in many fields, including the geological disposal of nuclear waste and the mobility of REE under the surface conditions, as Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O can be regarded as the pure Pr and Nd end-members of deveroite, a recently discovered natural REE oxalate with the following stoichiometry, (Ce 1.01 Nd 0.33 La 0.32 Pr 0.11 Y 0.11 Sm 0.01 Pb 0.04 U 0.03 Th 0.01 Ca 0.04 ) 2.01 (C 2 O 4 ) 2.99 •9.99H 2 O. Regarding its importance in the geological disposal of nuclear waste, Am 2 (C 2 O 4 ) 3 •10H 2 O/Pu 2 (C 2 O 4 ) 3 •10H 2 O/Cm 2 (C 2 O 4 ) 3 •10H 2 O can be the source-term phase for actinides, as demonstrated by the instance in the disposal in clay/shale formations. This is exemplified by the stability of Am 2 (C 2 O 4 ) 3 •10H 2 O in comparison with Am(OH) 3 (am), Am(OH) 3 (s) and AmCO 3 (OH)(s) under the relevant geological repository conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Can Zn isotopes in sediments record past eutrophication of freshwater lakes? A pilot study at Lake Baldegg (Switzerland)

In this study, the speciation and isotopic composition of Zn were traced across the sediments of a freshwater lake that experienced one hundred years of strong eutrophication, in order to assess the potential of sedimentary Zn isotopes to record such an environmental disturbance. Here, the results indicate that the sedimentary Zn isotope signal varied with the change from pre-eutrophic to eutrophic conditions in the investigated lake. The average δ 66 Zn JMC value of the dominantly allochthonous lithogenic sediments deposited during the pre-eutrophic period was +0.27‰ ±0.05‰ (i.e. similar to the δ 66 Zn JMC value of +0.28‰ ±0.05‰ proposed for Bulk Silicate Earth), while enhanced autochthonous biochemical sedimentation during the eutrophic period resulted in significantly lower δ 66 Zn JMC values down to +0.04‰ ±0.06‰. Synchrotron-based X-ray absorption spectroscopy data revealed a concomitant change in Zn speciation from a dominant fraction of Zn in clay minerals during the pre-eutrophic period to a major fraction of Zn in ZnS during the eutrophic period. A linear regression relating the sedimentary Zn isotope signal to the fraction of Zn in ZnS indicated δ 66 Zn JMC values of +0.27‰ ±0.06‰ and 0.00‰ ±0.08‰ for Zn in clay minerals and in ZnS, respectively. The enrichment of light Zn in ZnS in the eutrophic sediments is tentatively attributed to enhanced biological uptake of light Zn in the water column, which resulted in an enhanced flux of organic-bound Zn towards the sediments and further transformation of organic Zn into ZnS upon biomass mineralization during early diagenesis. This hypothesis is in agreement with the fractionation towards lighter Zn reported for both biological uptake of Zn and ZnS precipitation. The results of this study emphasize the potential of sedimentary Zn isotopes to register past eutrophic periods in freshwater lakes, and thus to serve as a probe of paleo-environmental conditions and/or past land use at the catchment scale.

58 GEOSCIENCES↗
DOE OSTI2020

A small-angle neutron scattering study of the physical mechanism that drives the action of a viral fusion peptide

Viruses have evolved a variety of ways for delivering their genetic cargo to a target cell. One mechanism relies on a short sequence from a protein of the virus that is referred to as a fusion peptide. In some cases, the isolated fusion peptide is also capable of causing membranes to fuse. Infection by HIV-1 involves the 23 amino acid N-terminal sequence of its gp41 envelope protein, which is capable of causing membranes to fuse by itself, but the mechanism by which it does so is not fully understood. In this study, a variant of the gp41 fusion peptide that does not strongly promote fusion was studied in the presence of vesicles composed of a mixture of unsaturated lipids and cholesterol by small-angle neutron scattering and circular dichroism spectroscopy to improve the understanding of the mechanism that drives vesicle fusion. The peptide concentration and cholesterol content govern both the peptide conformation and its impact on the bilayer structure. The results indicate that the mechanism that drives vesicle fusion by the peptide is a strong distortion of the bilayer structure by the peptide when it adopts the β-sheet conformation.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

A numerical study of process complexity in permafrost dominated regions

Numerical modeling of permafrost dynamics requires adequate representation of atmospheric and surface processes, a reasonable parameter estimation strategy, and site-specific model development. The three main research objectives of the study are: (i) to propose a novel methodology that determines the required level of surface process complexity of permafrost models by conducting parameter sensitivity and calibration, (ii) to design and compare three numerical models of increasing surface process complexity, and (iii) to calibrate and validate the numerical models at the Yakou catchment on the Qinghai-Tibet Plateau as an exemplary study site. The calibration was carried out by coupling the Advanced Terrestrial Simulator (numerical model) and PEST (calibration tool). Simulation results showed that (i) A simple numerical model that considers only subsurface processes can simulate active layer development with the same accuracy as other more complex models that include surface processes. (ii) Peat and mineral soil layer permeability, Van Genuchten alpha, and porosity are highly sensitive. (iii) Liquid precipitation aids in increasing the rate of permafrost degradation. (iv) Deposition of snow insulated the subsurface during the thaw initiation period. We have developed and released an integrated code that couples the numerical software ATS to the calibration software PEST. The numerical model can be further used to determine the impacts of climate change on permafrost degradation.

Calibration↗
DOE OSTI2021

Contrasting thermally-induced structural and microstructural evolution of alumino-silicates with tubular and planar arrangements: Case study of halloysite and kaolinite

Materials with the similar chemical structures but different morphological organization exhibit considerable differences in thermally induced chemo-morphological evolution. With recent advancements in multi-scale X-ray scattering measurements, it is now possible to non-invasively probe the structural and microstructural evolution of such materials. In this study, we investigate the chemo-morphological evolution of halloysite and contrast the results with those for kaolinite. Halloysite and kaolinite have tubular and planar morphologies, respectively. Both materials are alumino-silicates comprising silica tetrahedra (T) and alumina octahedra (O) organized in a TO structure. Four distinct stages in the structural evolution were identified. Stages I, II, III, and IV correspond to temperature ranges of 25 to 125 °C, 125 to 400 °C, 400 to 625 °C, and 625 to 875 °C. Major structural changes correspond to the removal of interlayer/adsorbed water in stage I, the existence of the halloysite structure without interlayer water in stage II, dehydroxylation of halloysite in stage III, and the conversion of ordered halloysite to amorphous meta-halloysite in stage IV. Additionally, heating halloysite up to 875 °C resulted in slight widening of the nanotubes, as the average pore radius increased from 6.4 nm to 6.6 nm. Heating also resulted in an increase of wall thickness of the nanotubes from ~120 nm (25 °C) to 161 nm (875 °C). The increase in the halloysite nanotube diameter was attributed to the expansion of the structure and an increase in the surface roughness. The pore sizes in halloysite nanotubes were also confirmed using N 2 adsorption-desorption and nano-X-ray computed tomography (nano-XCT) measurements. The interlayer basal spacing in halloysite changed from 9.8 Å to 7.2 Å after the removal of interlayer water. At temperatures in the range of 625 to 875 °C, heating halloysite causes a small widening of nanotube pores and a minor increase in the surface area. In contrast, the interlayer spacing in kaolinite collapses on heating which reduces the nanoscale porosity. Furthermore, these studies demonstrate the differences in the chemo-morphological evolution of alumino-silicates with tubular and planar morphologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Reactions of Propyl Radicals: A Shock Tube - VUV Photoionization Mass Spectrometry Study

The pyrolytic reactions of n-propyl and i-propyl radicals and their precursors have been investigated at elevated temperatures and pressures (600 – 900 K and 5 – 8 bar). The studies were performed in a miniature high repetition rate shock tube with synchrotron vacuum ultraviolet photoionization mass spectrometry yielding comprehensive datasets of temporal and photoionization energy dependencies of reagents and products. The propyl radicals were generated by pyrolysis of alkyl nitrites. In addition to the main decomposition path, NO elimination, the mass spectra allowed an alternative minor path via HNO elimination to be identified and quantified. For the n-propyl precursor the HNO elimination route accounted for 9% of the alkyl nitrite while for the i-propyl precursor it was 2.5%. These values are in good agreement with a recent study on i-butyl radicals in the same apparatus at similar conditions. The ratio of disproportionation/recombination was obtained for n- propyl from the relative concentrations of n-hexane and propene and for i-propyl from 2,3-dimethyl butane and propene. For n-propyl the ratio is 0.3 and 1.2 for i-propyl, both are independent of temperature and pressure over the experimental range. The disproportionation/recombination ratios are about a factor of 2 higher than prior evaluations that are based mainly on room temperature data. The experimental results are some of the first from the apparatus used and comments are made about the technique, challenges encountered, and suggestions for future developments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

An experimental and kinetic modeling study of the pyrolysis of isoprene, a significant biogenic hydrocarbon in naturally occurring vegetation fires

Isoprene dominates the carbon flux emitted by vegetation and constitutes 40% of non-methane biogenic emissions worldwide. Despite pyrolysis experiments at temperatures above 1000 K showing a link between isoprene combustion and aromatic species formation, comprehensive mechanistic research on isoprene is scarce in the literature. Here, in this work, we carry out an experimental and theoretical study to build, for the first time, a chemical kinetic model describing isoprene pyrolysis. The formation of polycyclic aromatic hydrocarbon (PAH) precursor species, often observed in vegetation fire plumes, is partially explained by isoprene pyrolysis experiments and theoretical modeling. Molecular dynamics (MD) simulations unveil reaction pathways from allylic isoprenyl radicals to allene and cyclopentadiene (CPD) intermediates, two relevant species detected in the experiments. Rate constants for these identified pathways are calculated using variational transition state theory to update the kinetic model, which is validated against single-pulse shock tube (SPST), and jet-stirred reactor (JSR) experimental data in the temperature range of 850–1690 K. The kinetic model presents satisfactory agreement with the SPST experimental data, and a reaction pathway analysis shows that association of propargyl radicals results in benzene formation. The JSR pathway analysis also identifies the prominent reactions for CPD, benzene, styrene, and toluene formation. Our model does not reproduce the CPD experimental profiles, indicating that additional studies are necessary. Overall, our findings advance the understanding of isoprene pyrolysis and its related atmospheric pollutants in naturally occurring vegetation fires where smoldering and oxygen-deficient combustion processes are present.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A comprehensive experimental and kinetic modeling study of di-isobutylene isomers: Part 2

A wide variety of high temperature experimental data obtained in this study complement the data on the oxidation of the two di-isobutylene isomers presented in Part I and offers a basis for an extensive validation of the kinetic model developed in this study. Due to the increasing importance of unimolecular decomposition reactions in high-temperature combustion, we have investigated the di-isobutylene isomers in high dilution utilizing a pyrolysis microflow reactor and detected radical intermediates and stable products using vacuum ultraviolet (VUV) synchrotron radiation and photoelectron photoion coincidence (PEPICO) spectroscopy. Additional speciation data at oxidative conditions were also recorded utilizing a plug flow reactor at atmospheric pressure in the temperature range 725-1150 K at equivalence ratios of 1.0 and 3.0 and at residence times of 0.35 s and 0.22 s, respectively. Combustion products were analyzed using gas chromatography (GC) and mass spectrometry (MS). Ignition delay time measurements for di-isobutylene were performed at pressures of 15 and 30 bar at equivalence ratios of 0.5, 1.0, and 2.0 diluted in 'air' in the temperature range 900-1400 K using a high-pressure shock-tube facility. New measurements of the laminar burning velocities of di-isobutylene/air flames are also presented. The experiments were performed using the heat flux method at atmospheric pressure and initial temperatures of 298-358 K. Moreover, data consistency was assessed with the help of analysis of the temperature and pressure dependencies of laminar burning velocity measurements, which was interpreted using an empirical power-law expression. Electronic structure calculations were performed to compute the energy barriers to the formation of many of the product species formed. The predictions of the present mechanism were found to be in adequate agreement with the wide variety of experimental measurements performed.

09 BIOMASS FUELS↗
DOE OSTI2022

A wide range experimental study and further development of a kinetic model describing propane oxidation

This work presents an experimental and kinetic modeling study of propane oxidation. Ignition delay times of propane were measured in a high-pressure shock tube and in rapid compression machines in the temperature range 689 - 1700 K at equivalence ratios of 0.5, 1.0 and 2.0 in 'air', for a wide range of pressures from 20 to 90 bar. CO and H 2 O mole fraction profiles for propane oxidation were measured in a shock tube behind reflected shock waves in the temperature range 1370-1840 K at equivalence ratios of 0.5, 1.0 and 2.0 and at a pressure of approximately 1.3 atm. Moreover, propane oxidation was studied using a jet-stirred reactor coupled to a synchrotron vacuum ultraviolet photoionization mass spectrometer at low temperatures in the range 565 - 690 K and at a pressure of 1 atm. Further, this wide range of experimental datasets for propane oxidation was used to reoptimize and update our previous kinetic mechanisms, AramcoMech3.0 and NUIGMech1.1. In the current mechanism, NUIGMech1.3, the thermo-chemical parameters of all species relevant to low-temperature propane oxidation chemistry, including propyl-peroxyl, hydroperoxyl-propyl, hydroperoxyl-propyl-peroxyl, and carbonyl-hydroperoxide radicals, are updated based on newly calculated values at the CCSD(T)-F12/TZ-F12//B2PLYPD3/TZ///B2PLYP-D3/TZ level of theory. The improvements made in the thermochemical values and in the kinetic parameters for the low-temperature propane oxidation reactions in NUIGMech1.3 result in better model agreement with the new IDTs and speciation data, including carbon monoxide, formaldehyde, propene, acetaldehyde and various minor products such as ethylene, acetic acid, acrolein as well as various hydroperoxide and cyclic ether species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A wide range experimental and kinetic modeling study of the oxidation of 2,3-dimethyl-2-butene: Part 1

2,3-Dimethyl-2-butene (TME) is a potential fuel additive with high research octane number (RON) and octane sensitivity (S), which can improve internal combustion engine performance and efficiency. However, the combustion characteristics of TME have not been comprehensively investigated. Thus, it is essential to study the combustion characteristics of TME and construct a detailed chemical kinetic model to describe its combustion. In this paper, two high-pressure shock tubes and a constant-volume reactor are used to measure ignition delay times and laminar flame speeds of TME oxidation. Further, the ignition delay times were measured at equivalence ratios of 0.5, 1.0, and 2.0 in “air”, at pressures of 5 and 10 bar, in the temperature range of 950 – 1500 K. Flame speeds of the TME/ “air” mixtures were measured at atmospheric pressure, at a temperature of 325 K, for equivalence ratios ranging from 0.78 to 1.31. Two detailed kinetic mechanisms were constructed independently using different methodologies; the KAUST TME mechanism was constructed based on NUIGMech1.1, and the MIT TME mechanism was built using the Reaction Mechanism Generator (RMG). Both mechanisms were used to simulate the experimental results using Chemkin Pro. In the present work, reaction flux and sensitivity analyses were performed using the KAUST mechanism to determine the critical reactions controlling TME oxidation at the conditions studied.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

Reviewing computational studies of defect formation and behaviors in carbon fiber structural units

Solid-state carbon materials, such as graphite and graphene, are at the forefront of materials research because of their unique electronic, vibrational, and mechanical properties, leading to a broad range of potential and realized applications. One key application is their role as basic structural units of carbon fiber (CF), a lightweight alternative to steel. In CF, a delicate relationship exists between ultimate material strength and the atomic-scale density of defects contained at the inter- and intra-subunit levels. Computational studies provide insight into the stability of various types of defects that can form in these systems and connect with experimental observables such as bandgap and spectroscopic measurements. Therefore, the literature contains many computational studies that focus on changes induced by defects, including vacancies and Dienes transformations (Stone-Wales and Thrower defects). However, wide-ranging methods and cell sizes have been used, and property-specific information is often lacking. Furthermore, this review summarizes key literature findings, paying particular attention to changes in the electronic, vibrational, and mechanical properties induced by defects in graphitic materials relevant to CF.

36 MATERIALS SCIENCE↗