Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SUBSTRATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

GaAs/GaP Quantum-Well Heterostructures Grown on Si Substrates

Molecular-beam epitaxy is used to produce GaP/Si hybrid substrates that allow the growth of highly efficient light-emitting heterostructures with GaAs/GaP quantum wells. Despite the relatively high concentration of nonradiative-recombination centers in GaP/Si layers, GaAs/GaP quantum-well heterostructures grown on GaP/Si hybrid substrates are highly competitive in terms of efficiency and temperature stability of luminescence to similar heterostructures grown on lattice-matched GaP substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Estimation of the Electron–Phonon Coupling Constants for Graphene and Metallic and Nonmetallic Substrates

Two modes of graphene–substrate interaction have been considered: a weak van der Waals bond and a strong covalent bond. The Lennard–Jones potential and Harrison bond-orbital method are used in the former and latter cases, respectively. Analytical expressions for the electron–phonon interaction constants, which contain only two parameters (binding energy E{sub B} for graphene and a substrate and distance d between them) have been obtained. The constants have been calculated for metallic, semiconductor, and dielectric substrates.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The effect of nitridation parameters and initial growth conditions on the polarity of GaN epitaxial layers grown by plasma-assisted molecular-beam epitaxy on Si(111) substrates

The dependence of the crystallographic polarity of GaN epitaxial layers produced by nitrogen plasma-enhanced molecular-beam epitaxy on Si(111) substrates on the nitridation parameters and initial growth conditions has been studied. A rapid procedure for determining the polarity of GaN epitaxial layers was developed. It was found experimentally that the nitridation parameters of the silicon substrate have no effect on the polarity of a GaN layer. It was shown that the substrate temperature in the stage of nucleation of a GaN epitaxial layer is one of the factors determining its polarity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solving the Electrodynamic Problem for a Microstrip Radiating Structure with a Chiral Substrate

We present a solution of the electrodynamic problem for a microstrip radiating structure with a substrate of a chiral metamaterial using the singular integral representation of the field, which in turn is reduced to a singular integral equation with the Cauchy-type singularity relative to the longitudinal component of the surface current density. Graphs of the current distribution for different types of substrates and the chirality parameters of a substrate are given.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-Organization of Detonation-Diamond Particles on a Substrate in Carbon Condensation from the Vapor–Gas Phase

Processes in which the island structure is ordered occur in composite carbon films produced by preliminary population of an amorphous substrate with a detonation-diamond system and subsequent condensation of carbon from the vapor–gas phase. These processes, observed already upon filling of the substrate with diamond-growth centers, are manifested in that there appears a structural periodicity of the islands. It was found that the condensation of carbon on the populated substrate is accompanied by the evolution of the island structure of primary growth centers. This consists in that a hexagonal packing of the islands is formed, with the size of these islands increasing by two orders of magnitude. All these structural features of how a composite diamond-carbon film is formed indicate that self-organization processes occur in the system of diamond islands when carbon atoms are condensed and interact with primary diamond crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coulomb Electron Interaction between an Adsorbate and Substrate: a Model of a Surface Dimer

The Coulomb interaction in the adsorption (adsorbate—substrate) system is reduced to a short-range repulsion between electrons of the adsorbed particle and atom of the substrate, which form a surface dimer. It is shown that allowance for this interaction leads to increased charge transfer between components of the dimer and decreased charge transfer between the dimer and metal substrate, which is caused by variation of the Fermi level in the adsorption system.

74 ATOMIC AND MOLECULAR PHYSICS↗

An Approximate Formulation of the Effective Indentation Modulus of Elastically Anisotropic Film-on-Substrate Systems

Frictionless contact between an arbitrarily-shaped rigid indenter and an elastically anisotropic film-on-substrate system can be regarded as being superposed incrementally by a flat-ended punch contact, the shape and size of which are determined by the indenter shape, indentation depth (or applied load) and elastic properties of film and substrate. For typical nanoindentation applications, the indentation modulus can thus be approximated from the response of a circular contact with pressure of the form of [1 - (r/a){sup 2}]{sup -1/2}, where r is the radial coordinate and a is the contact radius. The surface-displacement Green's function for elastically anisotropic film-on-substrate system is derived in closed-form by using the Stroh formalism and the two-dimensional Fourier transform. The predicted dependence of the effective modulus on the ratio of film thickness to contact radius agrees well with detailed finite element simulations. Implications in evaluating film modulus by nanoindentation technique are also discussed.

36 MATERIALS SCIENCE↗

Structural and Mutational Analysis of Escherichia coli AlkB Provides Insight into Substrate Specificity and DNA Damage Searching

In Escherichia coli, cytotoxic DNA methyl lesions on the N1 position of purines and N3 position of pyrimidines are primarily repaired by the 2-oxoglutarate (2-OG) iron(II) dependent dioxygenase, AlkB. AlkB repairs 1-methyladenine (1-meA) and 3-methylcytosine (3-meC) lesions, but it also repairs 1-methylguanine (1-meG) and 3-methylthymine (3-meT) at a much less efficient rate. How the AlkB enzyme is able to locate and identify methylated bases in ssDNA has remained an open question. We determined the crystal structures of the E. coli AlkB protein holoenzyme and the AlkB-ssDNA complex containing a 1-meG lesion. We coupled this to site-directed mutagenesis of amino acids in and around the active site, and tested the effects of these mutations on the ability of the protein to bind both damaged and undamaged DNA, as well as catalyze repair of a methylated substrate. A comparison of our substrate-bound AlkB-ssDNA complex with our unliganded holoenzyme reveals conformational changes of residues within the active site that are important for binding damaged bases. Site-directed mutagenesis of these residues reveals novel insight into their roles in DNA damage recognition and repair. Our data support a model that the AlkB protein utilizes at least two distinct conformations in searching and binding methylated bases within DNA: a 'searching' mode and 'repair' mode. Moreover, we are able to functionally separate these modes through mutagenesis of residues that affect one or the other binding state. Finally, our mutagenesis experiments show that amino acid D135 of AlkB participates in both substrate specificity and catalysis.

59 BASIC BIOLOGICAL SCIENCES↗

Development of Substrate for RABiTS-based HTS Conductors

During its fifteen years of life, this CRADA has evolved in both scope and purpose. Early efforts to develop high performance bismuth-based powder-in-tube first generation high temperature superconductors (HTS) have shifted toward efforts to understand and develop technologies required to fabricate second generation HTS coated conductors. Since the two original longstanding principal investigators from UT-Battelle and Oxford Superconducting Technology (OST) are not presently employed by their respective organizations, this final report shall focus primarily on results of the more recent past involving research and development of the deformation and annealing processes required to fabricate metallic substrates for RABiTS-based second generation coated conductors. The specific objectives of this recent work involve the development of OST Ni/3%W tape for HTS coated conductors and include: (a) to improve uniformity of cube texture through control of deformation and annealing parameters, (b) to minimize delamination and other buffer deposition problems through understanding and control of key parameters related to the metal substrate, (c) to ensure that the textured metal substrate allows well textured buffers with no delamination, and (d) to prepared a final report.

36 MATERIALS SCIENCE↗

Nanostructural engineering of nitride nucleation layers for GaN substrate dislocation reduction.

With no lattice matched substrate available, sapphire continues as the substrate of choice for GaN growth, because of its reasonable cost and the extensive prior experience using it as a substrate for GaN. Surprisingly, the high dislocation density does not appear to limit UV and blue LED light intensity. However, dislocations may limit green LED light intensity and LED lifetime, especially as LEDs are pushed to higher current density for high end solid state lighting sources. To improve the performance for these higher current density LEDs, simple growth-enabled reductions in dislocation density would be highly prized. GaN nucleation layers (NLs) are not commonly thought of as an application of nano-structural engineering; yet, these layers evolve during the growth process to produce self-assembled, nanometer-scale structures. Continued growth on these nuclei ultimately leads to a fully coalesced film, and we show in this research program that their initial density is correlated to the GaN dislocation density. In this 18 month program, we developed MOCVD growth methods to reduce GaN dislocation densities on sapphire from 5 x 10{sup 8} cm{sup -2} using our standard delay recovery growth technique to 1 x 10{sup 8} cm{sup -2} using an ultra-low nucleation density technique. For this research, we firmly established a correlation between the GaN nucleation thickness, the resulting nucleation density after annealing, and dislocation density of full GaN films grown on these nucleation layers. We developed methods to reduce the nuclei density while still maintaining the ability to fully coalesce the GaN films. Ways were sought to improve the GaN nuclei orientation by improving the sapphire surface smoothness by annealing prior to the NL growth. Methods to eliminate the formation of additional nuclei once the majority of GaN nuclei were developed using a silicon nitride treatment prior to the deposition of the nucleation layer. Nucleation layer thickness was determined using optical reflectance and the nucleation density was determined using atomic force microscopy (AFM) and Nomarski microscopy. Dislocation density was measured using X-ray diffraction and AFM after coating the surface with silicon nitride to delineate all dislocation types. The program milestone of producing GaN films with dislocation densities of 1 x 10{sup 8} cm{sup -2} was met by silicon nitride treatment of annealed sapphire followed by the multiple deposition of a low density of GaN nuclei followed by high temperature GaN growth. Details of this growth process and the underlying science are presented in this final report along with problems encountered in this research and recommendations for future work.

36 MATERIALS SCIENCE↗

Re-routing of Sugar Catabolism Provides a Better Insight Into Fungal Flexibility in Using Plant Biomass-Derived Monomers as Substrates

The filamentous ascomycete Aspergillus niger has received increasing interest as a cell factory, being able to efficiently degrade plant cell wall polysaccharides as well as having an extensive metabolism to convert the released monosaccharides into value added compounds. The pentoses D-xylose and L-arabinose are the most abundant monosaccharides in plant biomass after the hexose D-glucose, being major constituents of xylan, pectin and xyloglucan. In this study, the influence of selected pentose catabolic pathway (PCP) deletion strains on growth on plant biomass and re-routing of sugar catabolism was addressed to gain a better understanding of the flexibility of this fungus in using plant biomass-derived monomers. The transcriptome, metabolome and proteome response of three PCP mutant strains, Δ larA Δ xyrA Δ xyrB , Δ ladA Δ xdhA Δ sdhA and Δ xkiA , grown on wheat bran (WB) and sugar beet pulp (SBP), was evaluated. Our results showed that despite the absolute impact of these PCP mutations on pure pentose sugars, they are not as critical for growth of A. niger on more complex biomass substrates, such as WB and SBP. However, significant phenotypic variation was observed between the two biomass substrates, but also between the different PCP mutants. This shows that the high sugar heterogeneity of these substrates in combination with the high complexity and adaptability of the fungal sugar metabolism allow for activation of alternative strategies to support growth.

59 BASIC BIOLOGICAL SCIENCES↗

Crystal Structure of CYP3A4 Complexed with Fluorol Identifies the Substrate Access Channel as a High-Affinity Ligand Binding Site

Cytochrome P450 3A4 (CYP3A4) is a major human drug-metabolizing enzyme, notoriously known for its extreme substrate promiscuity, allosteric behavior, and implications in drug–drug interactions. Despite extensive investigations, the mechanism of ligand binding to CYP3A4 is not fully understood. We determined the crystal structure of CYP3A4 complexed with fluorol, a small fluorescent dye that can undergo hydroxylation. In the structure, fluorol associates to the substrate channel, well suited for the binding of planar polyaromatic molecules bearing polar groups, through which stabilizing H-bonds with the polar channel residues, such as Thr224 and Arg372, can be established. Mutagenesis, spectral, kinetic, and functional data confirmed the involvement but not strict requirement of Thr224 for the association of fluorol. Collectively, our data identify the substrate channel as a high-affinity ligand binding site and support the notion that hydrophobic ligands first dock to the nearby peripheral surface, before migrating to the channel and, subsequently, into the active site.

59 BASIC BIOLOGICAL SCIENCES↗

Detection of endogenous alkaline phosphatase activity in intact cells by flow cytometry using the fluorogenic ELF-97 phosphatase substrate

BACKGROUND: The alkaline phosphatase (AP) substrate 2-(5'-chloro-2'-phosphoryloxyphenyl)-6-chloro-4-(3H)-quinazolinone (ELF((R))-97 for enzyme-labeled fluorescence) has been found useful for the histochemical detection of endogenous AP activity and AP-tagged proteins and oligonucleotide probes. In this study, we evaluated its effectiveness at detecting endogenous AP activity by flow cytometry. METHODS: The ELF-97 phosphatase substrate was used to detect endogenous AP activity in UMR-106 rat osteosarcoma cells and primary cultures of chick chondrocytes. Cells were labeled with the ELF-97 reagent and analyzed by flow cytometry using an argon ultraviolet (UV) laser. For comparison purposes, cells were also assayed for AP using a Fast Red Violet LB azo dye assay previously described for use in detecting AP activity by flow cytometry. RESULTS: The ELF-97 phosphatase substrate effectively detected endogenous AP activity in UMR-106 cells, with over 95% of the resulting fluorescent signal resulting from AP-specific activity (as determined by levamisole inhibition of AP activity). In contrast, less than 70% of the fluorescent signal from the Fast Red Violet LB (FRV) assay was AP-dependent, reflecting the high intrinsic fluorescence of the unreacted components. The ELF-97 phosphatase assay was also able to detect very low AP activity in chick chondrocytes that was undetectable by the azo dye method. CONCLUSIONS: The ELF-97 phosphatase assay was able to detect endogenous AP activity in fixed mammalian and avian cells by flow cytometry with superior sensitivity to previously described assays. This work also shows the applicability of ELF-97 to flow cytometry, supplementing its previously demonstrated histochemical applications. Copyright 1999 Wiley-Liss, Inc.

Non-NASA Center↗

A structural account of substrate and inhibitor specificity differences between two Naphthol reductases

Two short chain dehydrogenase/reductases mediate naphthol reduction reactions in fungal melanin biosynthesis. An X-ray structure of 1,3,6,8-tetrahydroxynaphthalene reductase (4HNR) complexed with NADPH and pyroquilon was determined for examining substrate and inhibitor specificities that differ from those of 1,3,8-trihydroxynaphthalene reductase (3HNR). The 1.5 {angstrom} resolution structure allows for comparisons with the 1.7 {angstrom} resolution structure of 3HNR complexed with the same ligands. The sequences of the two proteins are 46% identical, and they have the same fold. The 30-fold lower affinity of the 4HNR-NADPH complex for pyroquilon (a commercial fungicide that targets 3HNR) in comparison to that of the 3HNR-NADPH complex can be explained by unfavorable interactions between the anionic carboxyl group of the C-terminal Ile282 of 4HNR and CH and CH{sub 2} groups of the inhibitor that are countered by favorable inhibitor interactions with 3HNR. 1,3,8-Trihydroxynaphthalene (3HN) and 1,3,6,8-tetrahydroxynaphthalene (4HN) were modeled onto the cyclic structure of pyroquilon in the 4HNR-NADPH-pyroquilon complex to examine the 300-fold preference of the enzyme for 4HN over 3HN. The models suggest that the C-terminal carboxyl group of Ile282 has a favorable hydrogen bonding interaction with the C6 hydroxyl group of 4HN and an unfavorable interaction with the C6 CH group of 3HN. Models of 3HN and 4HN in the 3HNR active site suggest a favorable interaction of the sulfur atom of the C-terminal Met283 with the C6 CH group of 3HN and an unfavorable one with the C6 hydroxyl group of 4HN, accounting for the 4-fold difference in substrate specificities. Thus, the C-terminal residues of the two naphthol reductase are determinants of inhibitor and substrate specificities.

08 HYDROGEN↗

The crystal structure of Pseudomonas avirulence protein AvrPphB: A papain-like fold with a distinct substrate binding site

AvrPphB is an avirulence (Avr) protein from the plant pathogen Pseudomonas syringae that can trigger a disease-resistance response in a number of host plants including Arabidopsis. AvrPphB belongs to a novel family of cysteine proteases with the charter member of this family being the Yersinia effector protein YopT. AvrPphB has a very stringent substrate specificity, catalyzing a single proteolytic cleavage in the Arabidopsis serine/threonine kinase PBS1. We have determined the crystal structure of AvrPphB by x-ray crystallography at 1.35-{angstrom} resolution. The structure is composed of a central antiparallel {beta}-sheet, with {alpha}-helices packing on both sides of the sheet to form a two-lobe structure. The core of this structure resembles the papain-like cysteine proteases. The similarity includes the AvrPphB active site catalytic triad of Cys-98, His-212, and Asp-227 and the oxyanion hole residue Asn-93. Based on analogy with inhibitor complexes of the papain-like proteases, we propose a model for the substrate-binding mechanism of AvrPphB. A deep and positively charged pocket (S2) and a neighboring shallow surface (S3) likely bind to aspartic acid and glycine residues in the substrate located two (P2) and three (P3) residues N terminal to the cleavage site, respectively. Further implications about the specificity of plant pathogen recognition are also discussed.

36 MATERIALS SCIENCE↗

Crystal complexes of a predicted S-adenosylmethionine-dependent methyltransferase reveal a typical AdoMet binding domain and a substrate recognition domain

S-adenosyl-L-methionine-dependent methyltransferases (MTs) are abundant, and highly conserved across phylogeny. These enzymes use the cofactor AdoMet to methylate a wide variety of molecular targets, thereby modulating important cellular and metabolic activities. Thermotoga maritima protein 0872 (TM0872) belongs to a large sequence family of predicted MTs, ranging phylogenetically from relatively simple bacteria to humans. The genes for many of the bacterial homologs are located within operons involved in cell wall synthesis and cell division. Despite preliminary biochemical studies in E. coli and B. subtilis, the substrate specificity of this group of more than 150 proteins is unknown. As part of the Midwest Center for Structural Genomics initiative (www.mcsg.anl.gov), we have determined the structure of TM0872 in complexes with AdoMet and with S-adenosyl-L-homocysteine (AdoHcy). As predicted, TM0872 has a typical MT domain, and binds endogenous AdoMet, or co-crystallized AdoHcy, in a manner consistent with other known MT structures. In addition, TM0872 has a second domain that is novel among MTs in both its location in the sequence and its structure. The second domain likely acts in substrate recognition and binding, and there is a potential substrate-binding cleft spanning the two domains. This long and narrow cleft is lined with positively charged residues which are located opposite the S{sup +}-CH{sub 3} bond, suggesting that a negatively charged molecule might be targeted for catalysis. However, AdoMet and AdoHcy are both buried, and access to the methyl group would presumably require structural rearrangement. These TM0872 crystal structures offer the first structural glimpses at this phylogenetically conserved sequence family.

36 MATERIALS SCIENCE↗

Structural Milestones in the Reaction Pathway of an Amide Hydrolase: Substrate, Acyl, and Product Complexes of Cephalothin with AmpC [beta]-Lactamase

{beta}-lactamases hydrolyze {beta}-lactam antibiotics and are the leading cause of bacterial resistance to these drugs. Although {beta}-lactamases have been extensively studied, structures of the substrate-enzyme and product-enzyme complexes have proven elusive. Here, the structure of a mutant AmpC in complex with the {beta}-lactam cephalothin in its substrate and product forms was determined by X-ray crystallography to 1.53 {angstrom} resolution. The acyl-enzyme intermediate between AmpC and cephalothin was determined to 2.06 {angstrom} resolution. The ligand undergoes a dramatic conformational change as the reaction progresses, with the characteristic six-membered dihydrothiazine ring of cephalothin rotating by 109{sup o}. These structures correspond to all three intermediates along the reaction path and provide insight into substrate recognition, catalysis, and product expulsion.

60 APPLIED LIFE SCIENCES↗

InP substrate evaluation by MOVPE growth of lattice matched epitaxial layers.

InP substrates form the starting point for a wide variety of semiconductor devices. The surface morphology produced during epitaxy depends critically on the starting substrate. We evaluated (1 0 0)-oriented InP wafers from three different vendors by growing thick (5 mu m) lattice-matched epilayers of InP, Gain As, and AlInAs. We assessed the surfaces with differential interference contrast microscopy and atomic force microscopy. Wafers with near singular (1 0 0) orientations produced inferior surfaces in general. Vicinal substrates with small misorientations improved the epitaxial surface for InP dramatically, reducing the density of macroscopic defects while maintaining a low RMS roughness. GaInAs and AlInAs epitaxy step-bunched forming undulations along the miscut direction. Sulfur-doped wafers were considered for singular (1 0 0) and for 0.2 degrees misorientation toward (1 1 0). We found that mound defects observed for InP and GaInAs layers on iron-doped singular wafers were absent for singular sulfur-doped wafers. These observations support the conclusion that dislocation termination at the surface and expansion of the step spiral lead to the macroscopic defects observed.

36 MATERIALS SCIENCE↗