Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STONES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Free-Surface Liquid Lithium Flow Modeling and Stability Analysis for Fusion Applications

Liquid metal plasma facing components are considered an attractive design choice for fusion devices including pilot plants. Virtual prototyping of such devices includes modeling of free-surface flow of the electrically conductive liquid, which requires computational fluid dynamics (CFD) and magnetohydrodynamics (MHD) simulations. Numerical tools capable of simulating flows and heat transfer in the free-surface MHD flow were developed at PPPL based on the customized ANSYS CFX. Here, MHD is introduced using a magnetic vector potential approach. Free-surface flow capabilities are available in the code and were tested. Special stabilization procedures were derived and applied to improve convergence of the momentum equations with the source terms due to the Lorentz force and surface tension. Important characteristics of the fusion-relevant liquid metal flow is free surface smoothness and stability. Heat flux from the plasma impacts the liquid surface at a very acute angle, so any change of the free surface from axisymmetry can dramatically increase the local heat flux density and thus create excessive evaporation of liquid lithium into the plasma, which is detrimental to operations. Stability analysis of the liquid metal film flow was performed to determine applicable flow regimes. Thin film flow along horizontal wall is considered. Effects of gravity, magnetic field, and surface tension are included in the analysis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Data Acquisition System for Phase-III of the BeEST Experiment

The BeEST experiment is a precision laboratory search for physics beyond the standard model that measures the electron capture decay of 7 Be implanted into superconducting tunnel junction (STJ) detectors. For Phase-III of the experiment, we constructed a continuously sampling data acquisition system to extract pulse shape and timing information from 16 STJ pixels offline. Four additional pixels are read out with a fast list-mode digitizer, and one with a nuclear MCA already used in the earlier limit-setting phases of the experiment. Here, we present the performance of the data acquisition system and discuss the relative advantages of the different digitizers.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Limit to Accelerated Free-Sintering: Nano-Phase Separation Interferes With Organic Debinding

Nano-phase separating Ni–12 at. pct Ag powders are processed via high-energy ball milling and brought into a supersaturated state with a reduction of the grain size to the nanocrystalline scale, a combination that is designed to encourage rapid densification by phase separation upon heating. This unstable powder is then characterized by dilatometry, in-situ x-ray diffraction, thermogravimetry and microstructure analysis for sintering cycles up to 940 °C. However, these powder compacts exhibit excessive pore evolution and significant macroscopic swelling caused by removal of the organic process additives. This competition of organic removal with densification is known in nanocrystalline metals, but the present study adds an additional dimension of phase separation, which shifts the dominant swelling mechanism as the formation of the second phase traps the volatilizing organics and hinders the debinding process. The creep swelling and overall loss in relative density is then dominated by the creep deformation of the second Ag phase. The interference between organic removal and low-temperature onset of consolidation represents a new challenge to efforts aimed at rapid free sintering and should guide the design of rapidly sintering alloys; specifically, the present work emphasizes the need to select alloys that have their sintering-accelerating phase separation temperature above the range where gases are evolved.

36 MATERIALS SCIENCE↗

Titanium Sheet Fabricated from Powder for Industrial Applications

In collaboration with Ametek and Commonwealth Scientific and Industrial Research Organization (CSIRO), Oak Ridge National Laboratory has evaluated three different methods for converting titanium hydride-dehydride (HDH) powder into thin gauge titanium sheet from a roll compacted preform. Methodologies include sintering, followed by cold rolling and annealing; direct hot rolling of the roll-compacted sheet; and hot rolling of multiple layers of roll compacted sheet that are encapsulated in a steel can. All three methods have demonstrated fully consolidated sheet, and each process route has the ability to produce sheet that meets ASTM B265 specifications. However, not every method currently provides sheet that can be highly formed without tearing. The degree of sintering between powder particles, post processing density, and the particle to particle boundary layer where compositional variations may exist, have a significant effect on the ability to form the sheet into useful components. Uniaxial tensile test results, compositional analysis, bend testing, and biaxial testing of the titanium sheet produced from hydride-dehydride powder will be discussed. Multiple methods of fabrication and the resulting properties can then be assessed to determine the most economical means of making components for industrial applications.

36 MATERIALS SCIENCE↗

Capability of CAM5.1 in simulating maximum air temperature patterns over West Africa during boreal spring

This study classifies maximum air temperature patterns over West Africa into six groups and evaluates the capability of a global climate model (Community Atmospheric Model version 5.1; CAM) to simulate them. We analyzed 45-year (1961–2005) multi-ensemble (50 members) simulations from CAM and compared the results with those of the Climate Research Unit (CRU) and the twentieth Century Reanalysis data sets. Using Self Organizing Map algorithm to classify the spatial patterns of maximum air temperature during boreal spring, the study reveals the temperature patterns that CAM can simulate well and those the model struggles to reproduce. The results show that the best agreements between the composites of observation and CAM occur in the first temperature pattern group (which features positive temperatures anomalies over the Sahel) and Node 2 (which features near-normal temperature) pattern of the third group. CAM succeeded in reproducing some of the associated regional atmospheric dynamics and thermodynamic features in winds (horizontal and vertical), temperature fields, the cloud fractions, and the mean sea-level pressure. Although CAM struggles to capture the relationship between air temperature patterns and tele-connection indices during the boreal spring season over West Africa, it agrees with observations that temperature patterns over the sub-region cannot be associated with a single climate index. An ensemble member (SIM48) captures the inter-annual variation of the observed temperaure patterns with high sycronization (η > 44%), much better than that of ensembles mean (η < 30%). SIM48 also captures adequately four of the spatial patterns in comparison to three captured by the ensembles mean. This indicates that, for better seasonal forecasts and more reliable future climate projections, the practice whereby an ensemble mean is based on uniformly averaging the members rather than the performance of individual ensemble members needs to be reviewed. Finally, the results of the study may be used to improve the perfomance of CAM over West Africa, thereby strengthening the on-going efforts to include CAM as part of multi-model forecasting system over West Africa.

Lawal, Kamoru A. (ORCID:0000000281988844)↗

Estimation of metal strength at very high rates using free-surface Richtmyer–Meshkov Instabilities

Recently, Richtmyer–Meshkov Instabilities (RMI) have been proposed for studying the average strength at strain rates up to at least 10 7 /s. RMI experiments involve shocking a metal interface that has initial sinusoidal perturbations. The perturbations invert and grow subsequent to shock and may arrest because of strength effects. In this work we present new RMI experiments and data on a copper target that had five regions with different perturbation amplitudes on the free surface opposite the shock. We estimate the high-rate, low-pressure copper strength by comparing experimental data with Lagrangian numerical simulations. From a detailed computational study we find that mesh convergence must be carefully addressed to accurately compare with experiments, and numerical viscosity has a strong influence on convergence. We also find that modeling the as-built perturbation geometry rather than the nominal makes a significant difference. Because of the confounding effect of tensile damage on total spike growth, which has previously been used as the metric for estimating strength, we instead use a new strength metric: the peak velocity during spike growth. Furthermore, this new metric also allows us to analyze a broader set of experimental results that are sensitive to strength because some larger initial perturbations grow unstably to failure and so do not have a finite total spike growth.

36 MATERIALS SCIENCE↗

Comparison of Simultaneous Shock Temperature Measurements from Three Different Pyrometry Systems

Pyrometry is one of the most prevalent techniques for measuring temperature in shock physics experiments. However, the challenges of applying pyrometry in such highly dynamic environments produces multiple sources of uncertainty that require investigation. An outstanding question is the degree of agreement between different pyrometers and different experiments. Here we report a series of novel plate impact experiments with simultaneous thermal radiance measurements using three different multi-wavelength optical pyrometry systems, each with different spatial and temporal resolutions, on samples shocked to identical states. We compare the temperatures measured by each system and their associated uncertainties using a number of emissivity assumptions. The results shown that the measurements from all three systems agree within uncertainty. Furthermore, some non-thermal light contamination was observed despite a number of prevention measures.

36 MATERIALS SCIENCE↗

Lattice strain evolution and load partitioning during creep of a Ni-based superalloy single crystal with rafted γ' microstructure

In-situ neutron diffraction measurements were performed on monocrystalline samples of the Ni-based superalloy CMSX-4 during N-type γ' raft formation under the tensile creep conditions of 1150 °C/100 MPa, and subsequently on a rafted sample under the low temperature/high stress creep conditions of 715 °C/825 MPa. During 1150 °C/100 MPa creep, the γ' volume fraction decreased from ~70% to ~50%, the lattice parameter misfit was partly relieved, and the load was transferred from the creeping γ matrix to the γ' precipitates. On cooling back to room temperature, a fine distribution of γ' precipitates formed in the γ channels, and these precipitates were present in the 715 °C/825 MPa creep regime. Under low temperature/high stress creep, the alloy with rafted γ' microstructure exhibited superior creep strength to the cuboidal γ' microstructure produced following a standard heat-treatment. A lengthy creep incubation period was observed, believed to be associated with {111}$\langle$110$\rangle$ dislocations hindering propagation of {112}$\langle$110$\rangle$ dislocations. Following the creep incubation period, extensive macroscopic creep strain accumulated during primary creep as the γ phase yielded. Lastly, the diffraction data suggest a loss of precipitate/matrix coherency in the (0k0) interfaces as creep strain accumulated.

36 MATERIALS SCIENCE↗

Lattice parameter misfit evolution during creep of a cobalt-based superalloy single crystal with cuboidal and rafted gamma-prime microstructures

A [h00] oriented Co-based superalloy single crystal was crept under tension at 940 °C=100 MPa, resulting in a P-type raft morphology with extensive particle coalescence along the [h00] loading direction. However, particle coalescence was also observed in two perpendicular directions on the (h00) plane, normal to the loading axis. Tensile creep experiments were performed with in-situ neutron diffraction at 800 °C=500 MPa on this initially rafted $\gamma$ microstructure, and for comparison at (i) 900 °C=260 MPa, and at (ii) 750 °C=875 MPa, both with initially cuboidal $\gamma$ microstructures. The alloy was shown to exhibit a positive lattice parameter misfit, and during the first hour of creep at 900 °C=260 MPa, the lattice parameter evolution indicated changes in phase composition associated with $\gamma$ dissolution as the alloy achieved phase equilibrium at 900 °C. For all three in-situ creep measurements, there was a significant divergence of the $\gamma$ and g lattice parameters as creep proceeded. The lattice parameter misfit values between the precipitates and the matrix approached their unconstrained values during creep, and were notably large compared to those of Ni-based superalloys. This is indicative of a loss of coherency at the precipitate/matrix interfaces. Such a loss of coherency at the precipitate/matrix interfaces will likely degrade certain mechanical properties such as fatigue resistance, as has been shown for the Ni-based superalloys.

36 MATERIALS SCIENCE↗

Impact of climate change on European winter and summer flood losses

Climate change is expected to alter European floods and associated economic losses in various ways. Here we investigate the impact of precipitation change on European average winter and summer financial losses due to flooding under a 1.5 °C warming scenario (reflecting a projected climate in the year 2115 according to RCP2.6)and for a counterfactual current-climate scenario where the climate has evolved without anthropogenic influence (reflecting a climate corresponding to pre-industrial conditions). Climate scenarios were generated with the Community Atmospheric Model (CAM)version 5. For each scenario, we derive a set of weights that when applied to the current climate's precipitation results in a climatology that approximates that of the scenario. We apply the weights to annual losses from a well-calibrated (to the current climate)flood loss model that spans 50,000 years and re-compute the average annual loss to assess the impact of precipitation changes induced by anthropogenic climate change. The method relies on a large stochastic set of physically based flood model simulations and allows quick assessment of potential loss changes due to change in precipitation based on two statistics, namely total precipitation, and total precipitation of very wet days (defined here as the total precipitation of days above the 95th percentile of daily precipitation). We compute the statistics with the raw CAM precipitation and bias-corrected precipitation. Our results show that for both raw and bias-corrected statistics i)average flood loss in Europe generally tend to increase in winter and decrease in summer for the future scenario, and consistent with that change we also show that ii)average flood losses have increased (decreased)for winter (summer)from pre-industrial conditions to the current day. Finally, the magnitude of the change varies among scenarios and statistics chosen.

54 ENVIRONMENTAL SCIENCES↗

Thermal neutron scattering measurements and modeling of yttrium-hydrides for high temperature moderator applications

In this work, thermal neutron scattering measurements of yttrium hydride from 5 to 1,200 K were conducted to determine the change in inelastic scattering as a function of temperature and to probe for anharmonic effects. Additionally, measurements on samples of YH x from x = 1.62 to 1.90 were done to determine the effects of varying hydrogen concentration on the inelastic spectra. Changes in temperature affected the inelastic spectra in unanticipated ways, indicating that there are anharmonic effects, whereas hydrogen concentration did not significantly affect the inelastic spectra. These measurements were compared against the ENDF/B-VIII.0 thermal scattering files of YH 2 , as well as new thermal scattering files created by using the stochastic temperature-dependent effective potential (s-TDEP). Both libraries were found to be in good agreement with the experimental data at lower temperatures. At higher temperatures, the s-TDEP method is better at predicting the experimentally observed softening of phonon modes in acoustic and optical regions.

36 MATERIALS SCIENCE↗

Neutron thermalization in nuclear graphite: A modern story of a classic moderator

Graphite has been of great interest since the dawn of the nuclear era. In this work, we will focus on the thermal neutron scattering of two types of nuclear graphite that have different microstructures, namely, the historic PGA which has a very anisotropic medium-grained needle coke, and the new G347A which is a near-isotropic fine-grained graphite. We report the results of room temperature inelastic neutron scattering measurements for the scattering function, double differential scattering cross-section, and phonon density of states. The obtained results are discussed in conjunction with results extracted from first-principles lattice dynamics simulations of crystalline graphite, using the incoherent approximation and by also including the coherent-one phonon contribution. Excellent agreements have been found between the measured and calculated scattering functions and phonon densities of states. The inclusion of the coherent-one phonon scattering shows a significant improvement of the calculated scattering functions, double differentials, and inelastic scattering cross-sections. We also highlight the physical concerns about the current thermal neutron scattering ENDF/B-VIII of nuclear graphite library and its corresponding phonon density of states. This work aims to provide a new presentation of neutron thermalization by graphite and offers a new set of high quality experimental and computational data for consideration.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Mass flows and angular momentum density for p{sub x} + ip{sub y} paired fermions in a harmonic trap

We present a simple two-dimensional model of a p{sub x} + ip{sub y} superfluid in which the mass flow that gives rise to the intrinsic angular momentum is easily calculated by numerical diagonalization of the Bogoliubov-de Gennes operator. We find that, at zero temperature and for constant director l, the mass flow closely follows the Ishikawa-Mermin-Muzikar formula j{sub mass}=1/2 curl/({rho}hl/2)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mineralogic Investigation into Occurrence of High Uranium Well Waters in Upstate South Carolina USA

High levels of U (up to 5570 {micro}g/L) have been discovered in well waters near Simpsonville, South Carolina, USA. In order to characterize the mineralogical source of the U and possible structural controls on its presence, a deep (214 m) well was cored adjacent to one of the enriched wells. The highest gamma-ray emissions in the recovered core occur in coarse biotite granite at a depth just below 52 m. A slickenlined fault plane at 48.6 m and narrow pegmatite layers at depths of 113, 203 and 207 m also yield high gamma-ray counts. Thin sections were made from the above materials and along several subvertical healed fractures. Uraninite and coffinite are the principal U-rich minerals in the core. Other U-bearing minerals include thorite and thorogummite, monazite, zircon and allanite. Primary uraninite occurs in the biotite granite and in pegmatite layers. Secondary coffinite is present as tiny (<5 {micro}m) crystals dispersed along fractures in the granite and pegmatites. Coffinite also occurs along the slickenlined fault plane, where it is associated with calcite and calcic zeolite and also replaces allanite. Coffinite lacks radiogenic Pb, hence is considerably younger than the uraninite. Dissolution of partially oxidized Ca-rich uraninite occurring in the surficial biotite granite (or secondary coffinite in fracture zones) is likely the main source for the current high levels of U in nearby area wells. The high-U well waters have a carbonate signature, consistent with pervasive calcite vein mineralization in the core. Aqueous speciation calculations suggest U transport as an uranyl (U{sup 6+}) hydroxyl-carbonate complex. Later reduction resulted in secondary precipitation along fractures as a U{sup 4+} mineral (i.e., coffinite).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Laboratory column experiments and transport modeling to evaluate retardation of uranium in an aquifer downgradient of a uranium in-situ recovery site

The purpose of this study was to determine the attenuation potential and retardation of uranium in sediments taken from boreholes at the Smith-Ranch Highland in-situ recovery (ISR) site. Five column experiments with four different sediments were conducted to study the effects of variable mineralogy and alkalinity on uranium breakthrough. Uranium transport was modeled with PHREEQC using a generalized composite surface complexation model (GC SCM) with one, two, and, three generic surfaces, respectively. Reactive surface areas were approximated with PEST using BET derived surface areas to constrain fitting parameters. Uranium breakthrough was delayed by a factor of 1.68, 1.69 and 1.47 relative to the non-reactive tracer for three of the 5 experiments at an alkalinity of 540 mg/l. A sediment containing smectite and kaolinite retained uranium by a factor of 2.80 despite a lower measured BET surface area. Decreasing alkalinity to 360 mg/l from 540 mg/l increased retardation by a factor of 4.26. Model fits correlated well to overall BET surface area in the three columns where clay content was less than 1%. For the sediment with clay, models consistently understated uranium retardation when reactive surface sites were restricted by BET results. Calcite saturation was shown to be a controlling factor for uranium desorption as the pH of the system changes. A pH of 6 during a secondary background water flush remobilized previously sorbed uranium resulting in a secondary uranium peak at twice the influent concentrations. Furthermore, this study demonstrates the potential of GC SCM models to predict uranium transport in sediments with homogenous mineral composition, but highlights the need for further research to understand the role of sediment clay composition and calcite saturation in uranium transport.

58 GEOSCIENCES↗