Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SATELLITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Research Supporting Satellite Communications Technology

This report describes the second year of research effort under the grant Research Supporting Satellite Communications Technology. The research program consists of two major projects: Fault Tolerant Link Establishment and the design of an Auto-Configurable Receiver. The Fault Tolerant Link Establishment protocol is being developed to assist the designers of satellite clusters to manage the inter-satellite communications. During this second year, the basic protocol design was validated with an extensive testing program. After this testing was completed, a channel error model was added to the protocol to permit the effects of channel errors to be measured. This error generation was used to test the effects of channel errors on Heartbeat and Token message passing. The C-language source code for the protocol modules was delivered to Goddard Space Flight Center for integration with the GSFC testbed. The need for a receiver autoconfiguration capability arises when a satellite-to-ground transmission is interrupted due to an unexpected event, the satellite transponder may reset to an unknown state and begin transmitting in a new mode. During Year 2, we completed testing of these algorithms when noise-induced bit errors were introduced. We also developed and tested an algorithm for estimating the data rate, assuming an NRZ-formatted signal corrupted with additive white Gaussian noise, and we took initial steps in integrating both algorithms into the SDR test bed at GSFC.

Horan Stephen↗

Possibilities and Challenges in Using Satellite Data for PM2.5 Forecasts

Satellite remote sensing has brought our observation of the earth's atmosphere into a new era, and remote sensing capability could lead to a quantum leap in our ability of air quality monitoring and prediction. In terms of aerosols, the most common quantity from satellite retrieval is the atmospheric column aerosol optical thickness (AOT), and the most common quantity indicating air quality at the surface is the concentration of PM2.5. w e present here the relationship between the column AOT and the surface PM2.5 from a global aerosol model GOCART and from satellite and surface measurements. We will discuss the possibilities and challenges in using satellite data for PM2.5 forecasts, and if model-satellite assimilation can improve the forecast quality.

Chin, Mian↗

Silicon-Germanium Fast Packet Switch Developed for Communications Satellites

Emerging multimedia applications and future satellite systems will require high-speed switching networks to accommodate high data-rate traffic among thousands of potential users. This will require advanced switching devices to enable communication between satellites. The NASA Lewis Research Center has been working closely with industry to develop a state-of-the-art fast packet switch (FPS) to fulfill this requirement. Recently, the Satellite Industry Task Force identified the need for high-capacity onboard processing switching components as one of the "grand challenges" for the satellite industry in the 21st century. In response to this challenge, future generations of onboard processing satellites will require low power and low mass components to enable transmission of services in the 100 gigabit (1011 bits) per second (Gbps) range.

Quintana, Jorge A.↗

Web Transfer Over Satellites Being Improved

Extensive research conducted by NASA Lewis Research Center's Satellite Networks and Architectures Branch and the Ohio University has demonstrated performance improvements in World Wide Web transfers over satellite-based networks. The use of a new version of the Hypertext Transfer Protocol (HTTP) reduced the time required to load web pages over a single Transmission Control Protocol (TCP) connection traversing a satellite channel. However, an older technique of simultaneously making multiple requests of a given server has been shown to provide even faster transfer time. Unfortunately, the use of multiple simultaneous requests has been shown to be harmful to the network in general. Therefore, we are developing new mechanisms for the HTTP protocol which may allow a single request at any given time to perform as well as, or better than, multiple simultaneous requests. In the course of study, we also demonstrated that the time for web pages to load is at least as short via a satellite link as it is via a standard 28.8-kbps dialup modem channel. This demonstrates that satellites are a viable means of accessing the Internet.

Allman, Mark↗

Advanced Communications Technology Satellite Now Operating in an Inclined Orbit

The Advanced Communications Technology Satellite (ACTS) system has been modified to support operation in an inclined orbit that is virtually transparent to users, and plans are to continue this final phase of its operation through September 2000. The next 2 years of ACTS will provide a new opportunity for using the technologies that this system brought online over 5 years ago and that are still being used to resolve the technical issues that face NASA and the satellite industry in the area of seamless networking and interoperability with terrestrial systems. New goals for ACTS have been defined that align the program with recent changes in NASA and industry. ACTS will be used as a testbed to: Show how NASA and other Government agencies can use commercial systems for 1. future support of their operations Test, characterize, and resolve technical issues in using advanced communications 2. protocols such as asynchronous transfer mode (ATM) and transmission control protocol/Internet protocol (TCP/IP) over long latency links as found when interoperating satellites with terrestrial systems Evaluate narrow-spot-beam Ka-band satellite operation in an inclined orbit 3. Verify Ka-band satellite technologies since no other Ka-band system is yet 4. available in the United States

Bauer, Robert A.↗

Astrobiological and Geological Implications of Convective Transport in Icy Outer Planet Satellites

The oceans of large icy outer planet satellites are prime targets in the search for extraterrestrial life in our solar system. The goal of our project has been to develop models of ice convection in order to understand convection as an astrobiologically relevant transport mechanism within icy satellites, especially Europa. These models provide valuable constraints on modes of surface deformation and thus the implications of satellite surface geology for astrobiology, and for planetary protection. Over the term of this project, significant progress has been made in three areas: (1) the initiation of convection in large icy satellites, which we find probably requires tidal heating; (2) the relationship of surface features on Europa to internal ice convection, including the likely role of low-melting-temperature impurities; and (3) the effectiveness of convection as an agent of icy satellite surface-ocean material exchange, which seems most plausible if tidal heating, compositional buoyancy, and solid-state convection work in combination. Descriptions of associated publications include: 3 published papers (including contributions to 1 review chapter), 1 manuscript in revision, 1 manuscript in preparation (currently being completed under separate funding), and 1 published popular article. A myriad of conference abstracts have also been published, and only those from the past year are listed.

Pappalardo, Robert T.↗

Si XII X-ray Satellite Lines in Solar Flare Spectra

The temperature dependence of the Si XII n=3 and n=4 dielectronic satellite line features at 5.82A and 5.56A respectively, near the Si XIII 1s(sup 2)-1s3p and 1s(sup 2)-1s4p lines (5.681A and 5.405A), is calculated using atomic data presented here. The resulting theoretical spectra are compared with solar flare spectra observed by the RESIK spectrometer on the CORONAS-F spacecraft. The satellites, like the more familiar n=2 satellites near the Si XIII 1s(sup 2)-1s2p lines, are formed mostly by dielectronic recombination, but unlike the n=2 satellites are unblended. The implications for similar satellite lines in flare Fe spectra are discussed.

Phillips, K. J. H.↗

Numerically Integrated Orbits of the Major Saturnian Satellites fit to Earthbased Observations

We have fit numerically integrated orbits of the eight major satellites of Saturn to all available astrometric and meridian circle observations for the period of 1971 to 1992. The integration was carried out in cartesian coordinates in the J2000 system. The force model included the gravitational effects of the oblate primary, the mutual perturbations of the satellites, and perturbations due to Jupiter and the Sun. Values of the gravitational parameters of the Saturnian system, e.g. planet and satellite masses, were taken from Campbell, et. al., 1989, only the epoch state vectors of the satellites were adjusted to obtain orbits which fit the observations. All astrometric data was processed in the form of satellite relative positions which were weighted according to observer and opposition to reflect the varying data quality...

Jacobson, R. A.↗

Local oscillator distribution using a geostationary satellite

A satellite communication system suitable for distribution of local oscillator reference signals for a widely spaced microwave array has been developed and tested experimentally. The system uses a round-trip correction method of the satellite This experiment was carried out using Telstar-5, a commercial Ku-band geostationary satellite. For this initial experiment, both earth stations were located at the same site to facilitate direct comparison of the received signals. The local oscillator reference frequency was chosen to be 300MHz and was sent as the difference between two Ku-band tones. The residual error after applying the round trip correction has been measured to be better than 3psec for integration times ranging from 1 to 2000 seconds. For integration times greater then 500 seconds, the system outperforms a pair of hydrogen masers with the limitation believed to be ground-based equipment phase stability. The idea of distributing local oscillators using a geostationary satellite is not new; several researchers experimented with this technique in the eighties, but the achieved accuracy was 3 to 100 times worse than the present results. Since substantially and the performance of various components has improved. An important factor is the leasing of small amounts of satellite communication bandwidth. We lease three 100kHz bands at approximately one hundredth the cost of a full 36 MHz transponder. Further tests of the system using terminal separated by large distances and comparison tests with two hydrogen masers and radio interferometry is needed.

hydrogen maser↗

Flood and Landslide Applications of Near Real-time Satellite Rainfall Products

Floods and associated landslides are one of the most widespread natural hazards on Earth, responsible for tens of thousands of deaths and billions of dollars in property damage every year. During 1993-2002, over 1000 of the more than 2,900 natural disasters reported were due to floods. These floods and associated landslides claimed over 90,000 lives, affected over 1.4 billion people and cost about $210 billion. The impact of these disasters is often felt most acutely in less developed regions. In many countries around the world, satellite-based precipitation estimation may be the best source of rainfall data due to lack of surface observing networks. Satellite observations can be of essential value in improving our understanding of the occurrence of hazardous events and possibly in lessening their impact on local economies and in reducing injuries, if they can be used to create reliable warning systems in cost-effective ways. This article addressed these opportunities and challenges by describing a combination of satellite-based real-time precipitation estimation with land surface characteristics as input, with empirical and numerical models to map potential of landslides and floods. In this article, a framework to detect floods and landslides related to heavy rain events in near-real-time is proposed. Key components of the framework are: a fine resolution precipitation acquisition system; a comprehensive land surface database; a hydrological modeling component; and landslide and debris flow model components. A key precipitation input dataset for the integrated applications is the NASA TRMM-based multi-satellite precipitation estimates. This dataset provides near real-time precipitation at a spatial-temporal resolution of 3 hours and 0.25deg x 0.25deg. By careful integration of remote sensing and in-situ observations, and assimilation of these observations into hydrological and landslide/debris flow models with surface topographic information, prediction of useful probabilistic maps of landslide and floods for emergency management in a timely manner is possible. Early results shows that the potential exists for successful application of satellite precipitation data in improving/developing global monitoring systems for flood/landslide disaster preparedness and management. The scientific and technological prototype can be first applied in a representative test-bed and then the information deliverables for the region can be tailored to the societal and economic needs of the represented affected countries.

Hong, Yang↗

A First Approach to Global Runoff Simulation using Satellite Rainfall Estimation

Many hydrological models have been introduced in the hydrological literature to predict runoff but few of these have become common planning or decision-making tools, either because the data requirements are substantial or because the modeling processes are too complicated for operational application. On the other hand, progress in regional or global rainfall-runoff simulation has been constrained by the difficulty of measuring spatiotemporal variability of the primary causative factor, i.e. rainfall fluxes, continuously over space and time. Building on progress in remote sensing technology, researchers have improved the accuracy, coverage, and resolution of rainfall estimates by combining imagery from infrared, passive microwave, and space-borne radar sensors. Motivated by the recent increasing availability of global remote sensing data for estimating precipitation and describing land surface characteristics, this note reports a ballpark assessment of quasi-global runoff computed by incorporating satellite rainfall data and other remote sensing products in a relatively simple rainfall-runoff simulation approach: the Natural Resources Conservation Service (NRCS) runoff Curve Number (CN) method. Using an Antecedent Precipitation Index (API) as a proxy of antecedent moisture conditions, this note estimates time-varying NRCS-CN values determined by the 5-day normalized API. Driven by multi-year (1998-2006) Tropical Rainfall Measuring Mission (TRMM) Multi-satellite Precipitation Analysis, quasi-global runoff was retrospectively simulated with the NRCS-CN method and compared to Global Runoff Data Centre data at global and catchment scales. Results demonstrated the potential for using this simple method when diagnosing runoff values from satellite rainfall for the globe and for medium to large river basins. This work was done with the simple NRCS-CN method as a first-cut approach to understanding the challenges that lie ahead in advancing the satellite-based inference of global runoff. We expect that the successes and limitations revealed in this study will lay the basis for applying more advanced methods to capture the dynamic variability of the global hydrologic process for global runoff monlto~ngin real time. The essential ingredient in this work is the use of global satellite-based rainfall estimation.

Hong, Yang↗

Comparison of Cloud Properties from CALIPSO-CloudSat and Geostationary Satellite Data

Cloud properties are being derived in near-real time from geostationary satellite imager data for a variety of weather and climate applications and research. Assessment of the uncertainties in each of the derived cloud parameters is essential for confident use of the products. Determination of cloud amount, cloud top height, and cloud layering is especially important for using these real -time products for applications such as aircraft icing condition diagnosis and numerical weather prediction model assimilation. Furthermore, the distribution of clouds as a function of altitude has become a central component of efforts to evaluate climate model cloud simulations. Validation of those parameters has been difficult except over limited areas where ground-based active sensors, such as cloud radars or lidars, have been available on a regular basis. Retrievals of cloud properties are sensitive to the surface background, time of day, and the clouds themselves. Thus, it is essential to assess the geostationary satellite retrievals over a variety of locations. The availability of cloud radar data from CloudSat and lidar data from CALIPSO make it possible to perform those assessments over each geostationary domain at 0130 and 1330 LT. In this paper, CloudSat and CALIPSO data are matched with contemporaneous Geostationary Operational Environmental Satellite (GOES), Multi-functional Transport Satellite (MTSAT), and Meteosat-8 data. Unlike comparisons with cloud products derived from A-Train imagers, this study considers comparisons of nadir active sensor data with off-nadir retrievals. These matched data are used to determine the uncertainties in cloud-top heights and cloud amounts derived from the geostationary satellite data using the Clouds and the Earth s Radiant Energy System (CERES) cloud retrieval algorithms. The CERES multi-layer cloud detection method is also evaluated to determine its accuracy and limitations in the off-nadir mode. The results will be useful for constraining the use of the passive retrieval data in models and for improving the accuracy of the retrievals.

Nguyen, L.↗

Method and apparatus for determining position using global positioning satellites

A global positioning satellite receiver having an antenna for receiving a L1 signal from a satellite. The L1 signal is processed by a preamplifier stage including a band pass filter and a low noise amplifier and output as a radio frequency (RF) signal. A mixer receives and de-spreads the RF signal in response to a pseudo-random noise code, i.e., Gold code, generated by an internal pseudo-random noise code generator. A microprocessor enters a code tracking loop, such that during the code tracking loop, it addresses the pseudo-random code generator to cause the pseudo-random code generator to sequentially output pseudo-random codes corresponding to satellite codes used to spread the L1 signal, until correlation occurs. When an output of the mixer is indicative of the occurrence of correlation between the RF signal and the generated pseudo-random codes, the microprocessor enters an operational state which slows the receiver code sequence to stay locked with the satellite code sequence. The output of the mixer is provided to a detector which, in turn, controls certain routines of the microprocessor. The microprocessor will output pseudo range information according to an interrupt routine in response detection of correlation. The pseudo range information is to be telemetered to a ground station which determines the position of the global positioning satellite receiver.

Ward, John↗

Satellite dual antenna pointing system

A satellite antenna pointing system for separately pointing separated transmit and receive high gain antenna systems includes means for separately and sequentially applying a beacon signal to the transmit and receive antenna systems and a broad beam width antenna which has a coverage area greater than the overall coverage region of the spot beam antenna systems. The system includes ground stations located at or near the periphery of the overall coverage region adapted to receive these beacon signals. At a central control station these beacon signals are compared to provide first signals proportional to the ratio of said beacon signals received from said transmit antenna system and said broad beam width antenna and second signals proportional to the ratio of said beacon signals received from said satellite receive antenna system and said broad beam width antenna. The central station generates from said first signals transmit antenna control signals which are sent to the satellite to control the orientation of said transmit antenna system. Likewise, the central control station generates from the second signals receiver antenna control signals which are applied to the satellite to control the orientation of the satellite receive antenna system.

Keigler, John E.↗

An LO Phase Link Using a Commercial Geo-Stationary Satellite

This viewgraph presentation reviews an experiment to determine feasibility of achieving 1 ps level time transfer using a satellite link and make use of inexpensive Ku band transmit/receive equipment. It reviews the advantages of Two Way Satellite Time Transfer using a commercial Geo-Stationary Satellite: (1) Commercial satellites are available (2) Significant cost reduction when compared to Hydrogen Masers and (3) Large footprint- entire US (including Hawaii) with just one satellite.

two way time transfer↗

Semianalytical Propagation of Satellite Orbits about an Arbitrary Central Body

Precision mean element (PME) satellite theories play a key role in orbit dynamics analyses. These theories employ: nonsingular orbital elements comprehensive force models Generalized Method of Averaging Numerical interpolation concepts The Draper Semianalytical Satellite Theory (DSST) (Refs. 1 - 6), whose development was led by the author, and the independently-developed Universal Semianalytical Method (USM) (Ref. 7) are examples of such theories. These theories provide the capability to tailor the force modeling to meet the desired computational speed vs. accuracy trade-off. The flexibility of such theories is demonstrated by their ability to include complicated atmosphere density models and spacecraft models in the perturbation theory context. The value of high speed satellite theories, in this era of computational plenty, is that they allow new ways of looking at astrodynamical problems such as orbit design (Refs. 8, 9) and atmosphere density updating (Refs. 10, 11). In the mid to late-1980 s, the geodynamics community led the development of very precise geopotential models such as GEM T2 and GEM T3 (Ref. 12), and with the subsequent analysis of the TOPEX flight data, JGM-2 and JGM-3 (Ref. 13). These were high degree and order geopotentials, at least 50 x 50. In 1993, the DSST implementation in the GTDS program was extended to include the 50 x 50 geopotential models (Ref. 14). The 50 x 50 geopotential, J2000 integration coordinate system, and solid Earth tide capabilities were integrated in GTDS by Scott Carter (Ref. 15). This capability demonstrated 1 m accuracy versus the TOPEX Precise Orbit Ephemerides. Subsequently the DSST Standalone program was also extended to include high degree and order geopotential models (Ref. 5). More recently GTDS has been hosted in the Linux PC environment. However, all of these efforts have been limited to modeling the motion of an artificial Earth satellite. They did not consider the additional complexities associated with lunar, planetary, or other natural satellite orbiters. Such complexities include: additional coordinate systems (associated with the direction of the north pole of rotation and the prime meridian of the new central bodies) (Ref. 16) normalized gravity model coefficients (desirable for high degree and order fields) (Ref. 17) indirect oblateness

Cefola, Paul J.↗

Outcome of Recent Satellite Impact Experiments

This paper summarizes three satellite impact tests completed in early 2007 through collaboration between Kyushu University and the NASA Orbital Debris Program Office. The previous experiments completed in late 2005 aimed to compare low- and hyper-velocity impacts on identical target satellites, whereas the new tests used larger satellites as targets and aimed to investigate the effects of impact directions. Three identical micro satellites equipped with fully-functional electronic devices were prepared as targets. Their dimensions were 20 cm by 20 cm by 20 cm, and the mass of each was approximately 1.3 kilograms. Aluminum alloy solid spheres, with diameters of 3 cm and masses of 39 grams were prepared as projectiles. The impact velocity was approximately 1.7 km/s. The impact tests were carried out at the two-stage light gas gun facility at the Kyushu Institute of Technology. All three target satellites were completely fragmented, but there were noticeable differences among the three sets of fragments due to the different impact directions. More than 1000 fragments from each test were collected, measured, photographed, and documented with material descriptions. The analysis of the fragments is currently in progress. Preliminary results of the new data and comparisons with previous data will be included in the paper.

Hanada, Toshiya↗

History of On-orbit Satellite Fragmentations (14th Edition)

Since the first serious satellite fragmentation occurred in June 1961 (which instantaneously increased the total Earth satellite population by more than 400%) the issue of space operations within the finite region of space around the Earth has been the subject of increasing interest and concern. The prolific satellite fragmentations of the 1970s and the marked increase in the number of fragmentations in the 1980s served to widen international research into the characteristics and consequences of such events. Continued events in all orbits in later years make definition and historical accounting of those events crucial to future research. Large, manned space stations and the growing number of operational robotic satellites demand a better understanding of the hazards of the dynamic Earth satellite population.

Johnson, Nicholas L.↗