Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SALINITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Increased salt and drought tolerance by D-pinitol production in transgenic Arabidopsis thaliana

D-ononitol epimerase (OEP) catalyzes the conversion of D-ononitol to D-pinitol, which is the last step in the biosynthetic pathway, where myo-inositol is converted to pinitol in higher plants. In this study, OEP cDNA was isolated from Glycine max (GmOEP) and was functionally characterized, which confirmed that GmOEP expression was induced by high salinity and drought stress treatments. To understand the biological function of GmOEP, transgenic Arabidopsis plants overexpressing this protein were constructed. The transgenic Arabidopsis plants displayed enhanced tolerance to high salinity and drought stress treatments.

60 APPLIED LIFE SCIENCES↗

Assessment of the subcutaneous degradation process of insoluble hyaluronic acid in rats

Highlights: • Assessment of the subcutaneous degradation process of insoluble hyaluronic acid. • The speed of degradation of in vivo insoluble hyaluronic acid membranes varies depending on their swelling rate. • The process of degradation of insoluble hyaluronic acid in the subcutaneous over time was elucidated. Insoluble hyaluronic acid (IHA) may prevent adhesions by forming a physical barrier during the period when postoperative adhesions form. This study was performed to verify the changes that a solid IHA membrane undergoes as it is degraded in vivo, and to ascertain the swelling rate of IHA required for it to function as a physical barrier during the postoperative adhesion formation period. Nine female WI rats weighing 300–400 g were used. Discs 8 mm in diameter were cut out of dry IHA membranes made of IHA with a swelling rate (wet weight/dry weight) of either 2.47 (high-swelling IHA) or 1.94 (low-swelling IHA). They were placed in saline to swell and then washed with saline before subcutaneous implantation in four pockets in each rat. The high-swelling IHA started to degrade more rapidly than the low-swelling IHA. There was no evidence of degradation of the low-swelling IHA until day 7, but once it had started, the speed of degradation tended to be similar to that of the high-swelling IHA. The present results showed that, when IHA is implanted subcutaneously in rats, it is degraded over time in a phased process. The swelling rate required for the use of IHA as a postoperative adhesion barrier was also suggested.

60 APPLIED LIFE SCIENCES↗

Bisphosphonates do not Alter the Rate of Secondary Mineralization

Bisphosphonates function to reduce bone turnover, which consequently increases the mean degree of tissue mineralization at an organ level. However, it is not clear if bisphosphonates alter the length of time required for an individual bone-modeling unit (BMU) to fully mineralize. We have recently demonstrated that it takes {approx}350 days (d) for normal, untreated cortical bone to fully mineralize. The aim of this study was to determine the rate at which newly formed trabecular BMUs become fully mineralized in rabbits treated for up to 414 d with clinical doses of either risedronate (RIS) or alendronate (ALN). Thirty-six, 4-month old virgin female New Zealand white rabbits were allocated to RIS (n=12; 2.4 {mu}g/kg body weight), ALN (n=12; 2.4 {mu}g/kg body weight), or volume-matched saline controls (CON; n=12). Fluorochrome labels were administered at specific time intervals to quantify the rate and level of mineralization of trabecular bone from the femoral neck (FN) by Fourier transform infrared microspectroscopy (FTIRM). The organic (collagen) and inorganic (phosphate and carbonate) IR spectral characteristics of trabecular bone from undecalcified 4 micron thick tissue sections were quantified from fluorescently labels regions that had mineralized for 1, 8, 18, 35, 70, 105, 140, 210, 280, and 385 d (4 rabbits per time point and treatment group). All groups exhibited a rapid increase in mineralization over the first 18 days, the period of primary mineralization, with no significant differences between treatments. Mineralization continued to increase, at a slower rate up, to 385 days (secondary mineralization), and was not different among treatments. There were no significant differences between treatments for the rate of mineralization within an individual BMU; however, ALN and RIS both increased global tissue mineralization as demonstrated by areal bone mineral density from DXA. We conclude that increases in tissue mineralization that occur following a period of bisphosphonate treatment is a function of the suppressed rate of remodeling that allows for a greater number of BMUs to obtain a greater degree of mineralization.

59 BASIC BIOLOGICAL SCIENCES↗

Effect of In Vivo Nicotine Exposure on Chlorpyrifos Pharmacokinetics and Pharmacodynamics in Rats

Routine use of tobacco products may modify physiological and metabolic functions, including drug metabolizing enzymes, which may impact the pharmacokinetics of environmental contaminants. Chlorpyrifos is an organophosphorus (OP) insecticide that is bioactivated to chlorpyrifos-oxon, and manifests its neurotoxicity by inhibiting acetylcholinesterase (AChE). The objective of this study was to evaluate the impact of repeated nicotine exposure on the pharmacokinetics of chlorpyrifos (CPF) and its major metabolite, 3,5,6-trichloro-2-pyridinol (TCPy) in blood and urine and also to determine the impact on cholinesterase (ChE) activity in plasma and brain. Animals were exposed to 7-daily doses of either 1 mg nicotine/kg or saline (sc), and to either a single oral dose of 35 mg CPF/kg or a repeated dose of 5 mg CPF/kg/day for 7 days. Groups of rats were then sacrificed at multiple time-points after receiving the last dose of CPF. Repeated nicotine and CPF exposures resulted in enhanced metabolism of CPF to TCPy, as evidenced by increases in the measured TCPy concentration and AUC in blood. However, there was no significant difference in the amount of TCPy (free or total) excreted in the urine. The extent of brain acetylcholinesterase (AChE) inhibition was reduced due to nicotine co-exposure consistent with an increase in CYP450-mediated dearylation (detoxification) versus desulfuration. It was of interest to note that the impact of nicotine co-exposure was experimentally observed only after repeated CPF doses. Physiologically based pharmacokinetic model simulations of CPF-oxon concentrations in blood and brain were predicted to be lower in nicotine treated groups, which were simulated by increasing the dearylation Vmax based upon previously conducted in vitro metabolism studies. These results were consistent with the experimental data. The current study demonstrated that repeated nicotine exposure could alter CPF metabolism in vivo, further modulating brain AChE inhibition.

59 BASIC BIOLOGICAL SCIENCES↗

Seawater desalination by over-potential membrane capacitive deionization: Opportunities and hurdles

The salt removal capacity ( SRC ) of the carbon electrodes in membrane capacitive deionization (MCDI) is limited by the applied potential (<1.6 V). Thus, enhancement of the SRC is essential before applying MCDI to seawater desalination. This study aims at developing a novel MCDI system for seawater desalination by applying over-potential (OP) to enhance ion-adsorption capacity and kinetics, and by reversing the polarity (RP) of electrodes to improve ion-desorption kinetics (hereafter named OP-MCDI-RP) for seawater desalination. At 2.4 V, the OP-MCDI system with mesoporous carbon demonstrated a SRC value of 64.7 mg g –1 when desalting 0.5 M NaCl solution, while the OP-CDI system could only remove 8.2 mg g –1 under identical conditions. Similarly, an OP-MCDI cell using carbon aerogel demonstrated a greater SRC value of 43.4 mg g –1 in comparison with 12.5 mg g –1 achieved in OP-CDI. These results indicate that the OP-MCDI system can directly desalt high salinity water regardless of the electrode material. In contrast to the OP-MCDI system, the OP-MCDI-RP system yields a higher regeneration efficiency by applying a reversed low-voltage. It is shown that, under appropriate operating conditions, the OP-MCDI-RP system reduced the electrical conductivity of a seawater sample of 37 practical salinity units by 99.9%, suggesting that the OP-MCDI-RP system can be employed for seawater desalination. In conclusion, due to the dramatic increase in energy demand and insufficient long-term stability caused by high potential and high salt concentration, however, the OP-MCDI-RP process should be further investigated for potential practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Drying model of a high salt content cementitious waste form: Effect of capillary forces and salt solution

Highlights: • Drying model for a high salt content cementitious waste form is developed. • Water vapor diffusion and capillary liquid flow are distinguished. • Capillary and salt solution effects are considered in vapor-liquid equilibrium. A water transport model coupling capillary liquid flow with vapor diffusion is developed to describe the drying process for a cementitious waste form with high salinity porewater. Vapor-liquid equilibrium is formulated as the driving force for vapor diffusion and the model accounts for pore capillary and high salinity effects on water thermodynamic activity. Pore filling and porewater surface tension as a function of pore size distribution and water saturation have been quantified for the material. Geochemical speciation modeling is used to simulate porewater activity as a function of composition over the range of saturation. The theoretical relationship between relative humidity and water saturation generally agrees with experimental measurement, and the developed model is capable of predicting drying rates under various external relative humidity conditions. The model was developed to be incorporated into reactive transport models considering the effects of drying such as salt redistribution and efflorescence.

36 MATERIALS SCIENCE↗

Pore-scale CFD simulations of clay mobilization in natural porous media due to fresh water injection

The present work investigates mechanisms of permeability impairment as a result of low-salinity fluid injection into brine-saturated porous media containing dispersible clays. Here, we present a computational fluid dynamics model at the pore-scale to simulate detachment, migration and straining of fine particles in porous media. The model uses an immersed boundary method to simulate the motion of clay fines in a fluid. In addition to the hydrodynamic forces, we model the Derjaguin-Landau-Verwey-Overbeek forces (DLVO) between clay fines and grains. Our simulations show the impact of the injected fluid's salinity and velocity on the concentration of clay fines retained on the grain surface. We see clay particles dislodging from the grain surface in clusters of up to 12 particles. Our simulation results also demonstrate clogging of narrow pore spaces by the detached particles from the grain surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The role of Te(IV) and Bi(III) chloride complexes in hydrothermal mass transfer: An X-ray absorption spectroscopic study

Tellurium (Te) and bismuth (Bi) are two metal(loid)s often enriched together with gold (Au) in hydrothermal deposits; however the speciation and transport properties for these two metals in hydrothermal systems are poorly understood. We investigated the effect of chloride on the speciation of Te(IV) and Bi(III) in hydrothermal solutions using in-situ XAS spectroscopy. At ambient temperature, oxy-hydroxide complexes containing the [TeO3] moiety (e.g., H3TeO3+ under highly acidic conditions) predominate in salty solutions over a wide range in pH and salt concentrations. Te(IV)-Cl complexes only appear at pH(25 degrees C) <= 2 and high Cl- activity (>= 10). The highest order Te(IV) chloride complex detected is TeCl4(aq), and contains the [TeCl4] moiety. Upon heating to 199 degrees C, the Te(IV)-Cl complexes become more stable; however they still required highly acidic conditions which are likely to exist only in very limited environments in nature. At ambient temperature, Bi(III) is coordinated to 5.5(5) Cl atoms in high salinity, acidic (HCl >= 0.5 m) chloride solutions. This, combined with large EXAFS-derived structural disorder parameters, suggests that the Bi(III) complex is most likely present as both BiCl52- and BiCl63-. The number of Cl atoms coordinated to Bi(III) decreases with increasing temperature; at around 200 degrees C and above, Bi(III) is coordinated to three Cl atoms. Overall the data show that Te(IV) chloride complexes can be ignored in predicting Te mobility under oxidizing conditions in most geological environments, but that Bi(III) chloride complexes are expected to account for Bi mobility in acidic brines. New thermodynamic properties for Bi(III) chloride complexes are provided to improve reactive transport modeling of Bi up to 500 degrees C. Although higher order complexes such as BiCl52- and BiCl63- exist at ambient temperature, the BiCl3(aq) complex becomes the predominant chloride complex in saline solutions at T >= 200 degrees C.

Etschmann, Barbara E.↗

A techno-economic assessment of membrane distillation for treatment of Marcellus shale produced water

Membrane distillation (MD) is a promising desalination technology for treatment of high salinity shale gas produced water. Techno-economic assessment (TEA) is necessary for evaluating the economic feasibility of MD for produced water treatment as compared to other shale gas produced water management strategies. A detailed TEA for a hypothetical 0.5 million gallons per day (MGD) direct contact MD (DCMD) that concentrates produced water from 10% (100,000 mg/L) Total Dissolved Solids (TDS) to 30% salinity is presented in this study. The model is developed based on a combination of experimental results, ASPEN Plus process model, best available engineering knowledge, and cost estimates. Analysis reveals that thermal energy cost for MD operation contributes the most to total cost of treating produced water in an MD plant. Additionally, the results of sensitivity analysis reveal that feed TDS level and thermal energy price have a significant impact on total cost of treating produced water. We also explore the implications of utilizing waste heat on the economics of the MD technology for produced water treatment. Here the results reveal that the total cost of treating produced water using MD is $\$$5.70/m 3 feed which decreases significantly to $\$$0.74/m 3 feed when MD is integrated with a source of waste heat.

42 ENGINEERING↗

Desalination metamodels and a framework for cross-comparative performance simulations

There is an opportunity to save energy and reduce operational expenses when choosing a suitable desalination method aided by computational modeling. Existing models are not conducive to generalized comparisons between different desalination methods. Therefore, the work in this study developed metamodels for six desalination methods, grouped them into thermal and molecular transport families, and validated their predictive performance within 9% difference from published data. This validated framework allowed comparisons of desalination methods at their prescribed ranges of operational conditions that they were designed for. These conditions specify feed salinity ranges of 1.6 to 2.4 g/kg for Capacitive Deionization and Reverse Osmosis (RO), 2.8 to 4.2 g/kg for Electrodialysis, 28 to 42 g/kg for Thermovapor Compression and Humidification-Dehumidification, and 37 to 55 g/kg for Multi-Effect Distillation (MED). Despite different operational conditions, all models exhibit non-linear, positive correlation between energy consumption and system size in response to feed salinity and production rate. The framework is also employed in a cross-comparative analysis between MED and RO whose results suggest that energy intensity for MED is an order of magnitude greater than RO for the same operational conditions, but actual operational costs are comparable. Overall, the framework is ready for deployment in case studies of actual desalination plants.

42 ENGINEERING↗

Modeling and experimental validation of direct contact crossflow packed beds condenser used in HDH desalination systems

Humidification and dehumidification (HDH) desalination systems are alternatives to reverse osmosis desalination systems, especially for high salinity waters. A HDH system is essentially equipped with a humidifier (also called as evaporator) for air to pick up vapor from saline water, a dehumidifier (also called as condenser) to produce freshwater, and a heating source. HDH systems based on direct contact packed beds heat exchangers have remarkably lower costs than traditional HDH systems due to their inexpensive materials and simple configurations. This paper specifically focuses on direct contact crossflow packed beds condensers, in which cooling water vertically drips through the packed beds, directly contacting the horizontal air-vapor flow. A two-dimensional mathematical model that solves for the enthalpy values of the working fluids is proposed in this paper, and the PDEs are solved using finite differences. To validate the model, an experimental condenser was built and tested. Water temperatures inside the test section at twenty-nine locations were measured, as well as the air vapor temperatures of five locations at the outlet. The measured water and air-vapor temperatures agree with the simulation results with less than 10 % error in most of the compared domain.

42 ENGINEERING↗

CFD modeling of crystallization fouling with CO 2 desorption incorporated for a falling-film evaporator in thermal desalination

Seawater flowing around horizontal tubes in falling-film evaporators is a common configuration for thermal desalination. Heat is transferred from in-tube steam condensation to the shell-side seawater by conduction through the tube wall and scaling layer, and conduction and convection to the evaporating liquid film. CO 2 is simultaneously released from seawater and mixed with the produced vapor. Fouling coupled with CO 2 desorption has deleterious impacts on both evaporation and condensation. The evaluation of spatiotemporal dependent crystallization fouling and CO 2 desorption is vital to selecting optimal operating conditions. Here, in this work, a CO 2 desorption model is integrated into CFD modeling for predictions of coupled heat and mass transfer, to understand and predict scale formation and CO 2 desorption with local and transient profiles of temperature, carbonate species concentrations, pH, and total alkalinity. The porosity of the scale layer is experimentally determined as 67.7% and invoked in the calculation of effective thermal conductivity. The simulation results reveal that high steam temperatures increase seawater total alkalinity and accelerate scale formation. The scale thickness on the bottom tube reaches 0.30 μm and 5.24 μm for steam temperatures of 60 °C and 80 °C, respectively. High salinity leads to a large CO 2 desorption rates. The CO 2 desorption rate increases 43% when the seawater salinity increases from 35 to 55 g/kg. The effects of operating conditions on carbonate speciation and pH have been compared and analyzed. This model can serve as a comprehensive tool for the design of thermal desalination systems and optimal operation.

42 ENGINEERING↗

Integrated modeling analysis of estuarine responses to extreme hydrological events and sea-level rise

Estuaries are vulnerable to climate change and are particularly sensitive to extreme river discharge (RD) and sea-level rise (SLR). To understand the effects of extreme RD and SLR on estuaries, an integrated modeling approach is adopted to simulate hydrodynamic changes in the Yangtze River Estuary. Model results showed that SLR will intensify the estuarine hydrodynamics in water level, currents, and salinity. Water level, current speed, and salinity increased linearly with the magnitude of SLR. The hydrological model suggested a lower RD in the future. This will increase the saltwater intrusion, which will be more severe during the lower RD and drought extreme hydrological event (EHE) conditions. Model results also suggested that the saltwater intrusion is more sensitive to RD than SLR. In addition, the interplay between the RD and SLR will exacerbate the impacts of coastal oceans on estuarine hydrodynamics, especially during extremely low RD conditions. Moreover, the decrease of RD and deepening of the channel due to human activities will also amplify the effects of SLR on the Estuary, increasing the risk of coastal disasters.

3-D hydrodynamic model, extreme climate, draught, ↗

Utilizing rare earth elements as tracers in high TDS reservoir brines in CCS applications

In this paper we report the result of research associated with the testing of a procedures necessary for utilizing natural occurring trace elements, specifically the Rare Earth Elements (REE) as geochemical tracers in Carbon Capture and Storage (CCS) applications. Trace elements, particularly REE may be well suited to serve as in situ tracers for monitoring geochemical conditions and the migration of CO₂-charged waters within CCS storage systems. We have been conducting studies to determine the efficacy of using REE as a tracer and characterization tool in the laboratory, at a CCS analogue site in Soda Springs, Idaho, and at a proposed CCS reservoir at the Rock Springs Uplift, Wyoming. Results from field and laboratory studies have been encouraging and show that REE may be an effective tracer in CCS systems and overlying aquifers. In recent years, a series of studies using REE as a natural groundwater tracer have been conducted successfully at various locations around the globe. Additionally, REE and other trace elements have been successfully used as in situ tracers to describe the evolution of deep sedimentary Basins. Our goal has been to establish naturally occurring REE as a useful monitoring measuring and verification (MMV) tool in CCS research because formation brine chemistry will be particularly sensitive to changes in local equilibrium caused by the addition of large volumes of CO₂. Because brine within CCS target formations will have been in chemical equilibrium with the host rocks for millions of years, the addition of large volumes of CO₂ will cause reactions in the formation that will drive changes to the brine chemistry due to the pH change caused by the formation of carbonic acid. This CO₂ driven change in formation fluid chemistry will have a major impact on water rock reaction equilibrium in the formation, which will impart a change in the REE fingerprint of the brine that can measured and be used to monitor in situ reservoir conditions. Our research has shown that the REE signature imparted to the formation fluid by the introduction of CO₂ to the formation, can be measured and tracked as part of an MMV program. Additionally, this REE fingerprint may serve as an ideal tracer for fluid migration, both within the CCS target formation, and should formation fluids migrate into overlying aquifers. However application of REE and other trace elements to CCS system is complicated by the high salt content of the brines contained within the target formations. In the United States by regulation, in order for a geologic reservoir to be considered suitable for carbon storage, it must contain formation brine with total dissolved solids (TDS) > 10,000 ppm, and in most cases formation brines have TDS well in excess of that threshold. The high salinity of these brines creates analytical problems for elemental analysis, including element interference with trace metals in Inductively Coupled Plasma Mass Spectroscopy (ICP-MS) (i.e. element mass overlap due to oxide or plasma phenomenon). Additionally, instruments like the ICP-MS that are sensitive enough to measure trace elements down to the parts per trillion level are quickly oversaturated when water TDS exceeds much more than 1,000 ppm. Normally this problem is dealt with through dilution of the sample, bringing the water chemistry into the instruments working range. However, dilution is not an option when analyzing these formation brines for trace metals, because trace elements, specifically the REE, which occur in aqueous solutions at the parts per trillion levels. Any dilution of the sample would make REE detection impossible. Therefore, the ability to use trace metals as in situ natural tracers in high TDS brines environments requires the development of methods for pre-concentrating trace elements, while reducing the salinity and associated elemental interference such that the brines can be routinely analyzed by standard ICP-MS methods. As part of the Big Sky Carbon Sequestration Project the INL-CAES has developed a rapid, easy to use process that pre-concentrates trace metals, including REE, up to 100x while eliminating interfering ions (e.g. Ba, Cl). The process is straightforward, inexpensive, and requires little infrastructure, using only a single chromatography column with inexpensive, reusable, commercially available resins and wash chemicals. The procedure has been tested with synthetic brines (215,000 ppm or less TDS) and field water samples (up to 5,000 ppm TDS). Testing has produced data of high quality with REE capture efficiency exceeding 95%, while reducing interfering elements by > 99%.

54 ENVIRONMENTAL SCIENCES↗

Tree-inspired lignin microrods-based composite heterogeneous nanochannels for ion transport and osmotic energy harvesting

One of the key processes of tree lignification is that lignin penetrates into the cell wall and fills in the cell wall framework, thereby increasing the hardness and hydrophobic of the tree channels, which is beneficial to consolidate and support the tree cell wall and water transport. Inspired by this natural process, we demonstrated a lignin-based nanofluidic heterogeneous membrane that closely mimics the channels in tree, which can realize ion transport function and effectively capture reverse electrodialysis. The membrane was synthesized by heating dealkaline lignin and PVA at 200 °C and this formed fusiform microrods and a closed-packed membrane. Simultaneously, this membrane composited with anodized aluminum (AAO) channels membrane at 200 °C to form asymmetric heterogeneous nanochannels membrane, which can transport counter-ions and harvest osmotic energy. This membrane implements ion current rectification in 0.1 M KCl electrolyte solution at pH 3 due to the confinement of pores and opposite surface charges in lignin-based heterogeneous nanochannel. An output power density of 0.97 W m- 2 is obtained under a 50-fold salinity gradient, which can be further improved to 1.19 W m -2 by increasing the salinity gradient from 50-fold to 500-fold. Accordingly, this nanofluidic membranes were prepared by using lignin, the key component in tree, which not only mimicked a crucial process of the water and ionic transport process of channels in tree, but also had the prospect in the field of osmotic energy harvesting.

09 BIOMASS FUELS↗

Ostreopsis cf. ovata dynamics in the NW Mediterranean Sea in relation to biotic and abiotic factors

An expansion of the distribution of Ostreopsis cf. ovata, a dinoflagellate which produces palytoxin-like compounds, has been reported in recent years. Economical and social interests are affected by blooms, as they are responsible for respiratory and skin problems in humans and may cause damage to marine organisms. In order to identify the most influential environmental factors that trigger proliferations of O. cf. ovata in the area of the adjacent shallow rocky coast of the Ebro Delta (NW Mediterranean Sea) a three-year survey was performed on the metaphytic microalgae community growing on the macrophytes Jania rubens and Corallina elongata. Small-size diatoms were more abundant than dinoflagellates; O. cf. ovata was identified as the only species present from the genus. Seawater temperature was the primary driver defining the ecological niche of O. cf. ovata. Freshwater and groundwater fluxes were more pronounced in southern than in northern sites, which may have resulted in a distinct O. cf. ovata spatial distribution, with the highest records of abundance and more frequent blooms in the north. In consequence, negative correlations between the abundance of O. cf. ovata and nitrate concentrations and significant positive correlation with salinity were observed. The temporal pattern of O. cf. ovata dynamics from mid-July to early-November is probably due to the fact that this species is observed only above a certain threshold temperature of seawater. Metaphytic cells of O. cf. ovata were smaller in the northern site than in the south, possibly as a result of an increase in cell division, coinciding with higher abundance, and this could be an indicator of favorable conditions. Toxicity in planktonic cells was negatively correlated with cell abundance in the water column, achieving maximum concentrations of 25 pg. PLTX eq cell{sup −1}. - Highlights: • Presence of a single Ostreopsis genotype in confirmed through qPCR. • Temperature confirmed as the most important parameter affecting its distribution. • Salinity positively correlated with Ostreopsis cf. ovata abundance. • Ostreopsis cf. ovata has a restricted ecological niche. • Toxicity in Ostreopsis planktonic cells negatively correlated with cell abundance.

54 ENVIRONMENTAL SCIENCES↗

Mercury-induced vascular dysfunction is mediated by angiotensin II AT-1 receptor upregulation

Highlights: • Chronic exposure to Hg promotes Ang II AT-1 receptors upregulation in aorta. • Ang II AT-1 receptors activation induces vascular damage in rats exposed to Hg. • Upregulation of Ang II AT-1 receptors by Hg increases ROS and prostanoids levels. • Oxidative stress caused by Ang II AT-1 receptors activation reduces NO bioavailability. Low doses of mercury (Hg) promote deleterious effects on cardiovascular system, but the mechanisms implicated remain unclear. This study analyzed whether angiotensin II AT-1 receptors are involved in the vascular dysfunction caused by chronic exposure to low HgCl{sub 2} doses. For this, rats were divided into four groups and untreated (saline by im injections and tap water by gavage) or treated for 30 days as follows: Mercury (HgCl{sub 2} im, first dose of 4.6 µg kg{sup −1} and subsequent doses of 0.07 µg kg{sup −1} day{sup −1}, and tap water by gavage); Losartan (saline im and losartan, 15 mg kg{sup −1} day{sup −1}, by gavage); Losartan-Mercury (HgCl{sub 2} im and Losartan by gavage). Systolic blood pressure was measured by tail plethysmography, vascular reactivity in aorta by isolated organ bath, oxidative stress by measuring the levels of reactive oxygen species (ROS), malondialdehyde (MDA) and antioxidant capacity (FRAP) and protein expression of AT-1 receptors by Western Blot. As results, co-treatment with losartan prevented the increased aortic vasoconstrictor responses to phenylephrine (Phe), the involvement of ROS and prostanoids on the response to Phe and the reduced negative endothelial modulation by nitric oxide on these responses. Moreover, this co-treatment avoided the increase in plasmatic and vascular oxidative stress and AT-1 protein expression in aorta. In conclusion, these results suggest that AT-1 receptors upregulation might play a key role in the vascular damage induced by Hg exposure by increasing oxidative stress and probably by reducing NO bioavailability.

54 ENVIRONMENTAL SCIENCES↗

Recent seawater intrusion into deep aquifer determined by the radioactive noble-gas isotopes 81 Kr and 39 Ar

Radioactive noble-gas isotopes tracers 81 Kr and 39 Ar are used for the first time to measure the residence times of deep (~1000 m) saline coastal groundwater, and to determine its connection mode with the sea. The average rate of seawater intrusion into the deep aquifer in Israel, located near the Mediterranean Sea, is estimated. 81 Kr-ages of the saline water samples, found to be younger than 40 ka, contradict previously estimated ages of up to several million years based on hydrogeological considerations. The new results imply a stronger and more recent connection between the aquifer and the sea, and indicate that the intrusion occurred during the sea-level rise that began about 20 ka ago. These coastal aquifers need to be managed with caution because lowering of the adjacent fresh water level due to over pumping could accelerate seawater intrusion in a relatively short time. As a result, this study demonstrates the suitability of these two noble-gas tracers for the examination of hydrogeological systems in general and for the study of seawater intrusion in particular.

39Ar↗