Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reconfiguration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Optimum spaceborne computer system design by simulation

A deterministic digital simulation model is described which models the Automatically Reconfigurable Modular Multiprocessor System (ARMMS), a candidate computer system for future manned and unmanned space missions. Use of the model as a tool in configuring a minimum computer system for a typical mission is demonstrated. The configuration which is developed as a result of studies with the simulator is optimal with respect to the efficient use of computer system resources, i.e., the configuration derived is a minimal one. Other considerations such as increased reliability through the use of standby spares would be taken into account in the definition of a practical system for a given mission.

Williams, T.↗
NASA NTRS1972

Memory interface simulator: A computer design aid

Results are presented of a study conducted with a digital simulation model being used in the design of the Automatically Reconfigurable Modular Multiprocessor System (ARMMS), a candidate computer system for future manned and unmanned space missions. The model simulates the activity involved as instructions are fetched from random access memory for execution in one of the system central processing units. A series of model runs measured instruction execution time under various assumptions pertaining to the CPU's and the interface between the CPU's and RAM. Design tradeoffs are presented in the following areas: Bus widths, CPU microprogram read only memory cycle time, multiple instruction fetch, and instruction mix.

Taylor, D. S.↗
NASA NTRS1973

Optimum spaceborne computer system design by simulation

A deterministic simulator is described which models the Automatically Reconfigurable Modular Multiprocessor System (ARMMS), a candidate computer system for future manned and unmanned space missions. Its use as a tool to study and determine the minimum computer system configuration necessary to satisfy the on-board computational requirements of a typical mission is presented. The paper describes how the computer system configuration is determined in order to satisfy the data processing demand of the various shuttle booster subsytems. The configuration which is developed as a result of studies with the simulator is optimal with respect to the efficient use of computer system resources.

Williams, T.↗
NASA NTRS1971

Study of Alternate Space Shuttle Concepts. Volume 2. Part 1: Concept Analysis and Definition

Three different space shuttle systems have been defined and analyzed. The first is a stage-and-one-half system optimized to meet program requirements. The second is a two-stage, fully reusable system also designed to meet program requirements. The third is a convertible system which operates initially as a stage-and-one-half system and is subsequently converted to a two-stage, fully reusable system by reconfiguration of the orbiter vehicle and development of a booster vehicle. The design and performance of this third system must necessarily be compromised somewhat to facilitate the conversion. For each system, the applicable requirements, ground rules, and assumptions are defined. The characteristics of each system are listed and a detailed description and analysis of the system are presented. Finally, a cost analysis for the system is given.

Source record↗
NASA NTRS1973

Highly reliable processor system for space application.

Description of a redundant processor organization which can be implemented with off-the-shelf processors for fault-tolerant operation. Reconfiguration can be performed automatically in a transientless manner. To support this system configuration and redundancy management concept, an operating system referred to as a synchronous executive has been designed. This system is directed at real-time closed-loop space applications where minimum response time, no degradation of software solution, and system simplicity are of importance. The system is based on a multicomputer organization with each machine solving the same problem based on a common set of inputs. Processor status is fed to a higher-level device which selects a controlling processor for controlling outputs and monitoring computers for fault detection.

Tsou, H. S. E.↗
NASA NTRS1973

High-reliability strapdown platforms using two-degree-of-freedom gyros.

This paper presents a new concept of high-reliability strapdown attitude sensing systems for space vehicles. Each system utilizes a set of redundant two-degree-of-freedom gyros. An optimum system configuration is obtained for maximum system reliability and the best measurement accuracy. Improved accuracy of the final data is obtained by using the least-square data reduction technique. Each system possesses a 'sensor performance management' feature which is capable of failure detection, faulty gyro identification, system reconfiguration, and, possibly, sensor recalibration. Improvement in reliability, as compared to other types of strapdown systems, is demonstrated. Details of the development are described in terms of a system containing four gyros.

Hung, J. C.↗
NASA NTRS1974

Modular digital computer system design

Automatically-Reconfigurable Modular Multiprocessor System (ARMMS) provides redundant processing with dynamic mode switching in real time. Design will provide higher computer capability than that presently available for same amount of hardware and will furnish modular system which is responsive to diverse problems effectively.

Source record↗
NASA NTRS1972

Design of a modular digital computer system, DRL 4

The design is reported of an advanced modular computer system designated the Automatically Reconfigurable Modular Multiprocessor System, which anticipates requirements for higher computing capacity and reliability for future spaceborne computers. Subjects discussed include: an overview of the architecture, mission analysis, synchronous and nonsynchronous scheduling control, reliability, and data transmission.

Source record↗
NASA NTRS1973

Theory of reliable systems

The analysis and design of reliable systems are discussed. The attributes of system reliability studied are fault tolerance, diagnosability, and reconfigurability. Objectives of the study include: to determine properties of system structure that are conducive to a particular attribute; to determine methods for obtaining reliable realizations of a given system; and to determine how properties of system behavior relate to the complexity of fault tolerant realizations. A list of 34 references is included.

Meyer, J. F.↗
NASA NTRS1974

Appendices for the Space Applications program, 1974

To achieve truly low cost system design with direct evolution for inorbit shuttle resupply, a modular building block approach has been adopted. The heart of the modular building block concept lies in the ability to use a common set of nonoptimized subsystems in such a way that a wide variety of missions can be flown with no detrimental impact on performance. By standardizing the mechanical configurations and electrical interfaces of the subsystem modules, and by designing each of them to be structurally and thermally independent entities, it is possible to cluster these building blocks or modules about an instrument system so as to adequately perform the mission without the need for subsystem redevelopments for each mission. This system concept offers the following capabilities: (1) the ability to launch and orbit the observatory by either the Delta, the Titan, or the space shuttle. (2) the ability to completely reconfigure the spacecraft subsystems for different launch vehicles, and (3) the ability to perform in-orbit resupply and/or emergency retrieval of the observatory.

Source record↗
NASA NTRS1973

The design and utilization of a spacelab for sortie missions

Consideration of the feasibility of a 'sortie' type mission in which a manned laboratory is carried into near-earth orbit for a 7- to 30-day mission and is then returned to earth for reconfiguration and subsequent reflight. The fundamental difference in approach between the proposed Spacelab and concepts previously considered for space stations is that the spacelab will remain attached to the Shuttle Orbiter during its entire mission in space. An important trend in the design approach is the introduction of structural modularity of the Spacelab. Another factor which has been a significant design consideration is the need to properly balance the Shuttle and Spacelab configuration over a wide range of aerodynamic regimes and landing conditions. Also considered are the requirements which may be placed on the laboratory by potential users in fields of science and space applications.

Lord, D. R.↗
NASA NTRS1975

Theory of reliable systems

An attempt was made to refine the current notion of system reliability by identifying and investigating attributes of a system which are important to reliability considerations. Techniques which facilitate analysis of system reliability are included. Special attention was given to fault tolerance, diagnosability, and reconfigurability characteristics of systems.

Meyer, J. F.↗
NASA NTRS1975

Impact of coverage on the reliability of a fault tolerant computer

A mathematical reliability model is established for a reconfigurable fault tolerant avionic computer system utilizing state-of-the-art computers. System reliability is studied in light of the coverage probabilities associated with the first and second independent hardware failures. Coverage models are presented as a function of detection, isolation, and recovery probabilities. Upper and lower bonds are established for the coverage probabilities and the method for computing values for the coverage probabilities is investigated. Further, an architectural variation is proposed which is shown to enhance coverage.

Bavuso, S. J.↗
NASA NTRS1975

Advanced computer technology - An aspect of the Terminal Configured Vehicle program

NASA is conducting a Terminal Configured Vehicle program to provide improvements in the air transportation system such as increased system capacity and productivity, increased all-weather reliability, and reduced noise. A typical jet transport has been equipped with highly flexible digital display and automatic control equipment to study operational techniques for conventional takeoff and landing aircraft. The present airborne computer capability of this aircraft employs a multiple computer simple redundancy concept. The next step is to proceed from this concept to a reconfigurable computer system which can degrade gracefully in the event of a failure, adjust critical computations to remaining capacity, and reorder itself, in the case of transients, to the highest order of redundancy and reliability.

Berkstresser, B. K.↗
NASA NTRS1974

Automatic Navaids Checkout System

An automatic Navaids Checkout System for use in Space Shuttle development is discussed. The groundwork leading to the development is presented, followed by a description of the hardware. Finally, system utilization including operator interface and system software is discussed. The Navaids Checkout System is extremely flexible with capability to handle different test articles with a minimum of hardware reconfiguration. Application software is written in a high level user-oriented test language. The checkout system has been in operation for approximately one year with capability to handle VOR, ILS, TACAN, ATC Radar Beacon, and UHF/VHF communications equipment.

Belver, T. L.↗
NASA NTRS1977

Meta-assembler

Machine-independent cross-assembler program can produce object modules for variety of computers. Program is capable of being reconfigured by data set supplied at assembly time.

Hodges, B. C.↗
NASA NTRS1975

Design of a modular digital computer system, CDRL no. D001, final design plan

The engineering breadboard implementation for the CDRL no. D001 modular digital computer system developed during design of the logic system was documented. This effort followed the architecture study completed and documented previously, and was intended to verify the concepts of a fault tolerant, automatically reconfigurable, modular version of the computer system conceived during the architecture study. The system has a microprogrammed 32 bit word length, general register architecture and an instruction set consisting of a subset of the IBM System 360 instruction set plus additional fault tolerance firmware. The following areas were covered: breadboard packaging, central control element, central processing element, memory, input/output processor, and maintenance/status panel and electronics.

Easton, R. A.↗
NASA NTRS1974

A Functional Description of a Digital Flight Test System for Navigation and Guidance Research in the Terminal Area

A guidance, navigation, and control system, the Simulated Shuttle Flight Test System (SS-FTS), when interfaced with existing aircraft systems, provides a research facility for studying concepts for landing the space shuttle orbiter and conventional jet aircraft. The SS-FTS, which includes a general-purpose computer, performs all computations for precisely following a prescribed approach trajectory while properly managing the vehicle energy to allow safe arrival at the runway and landing within prescribed dispersions. The system contains hardware and software provisions for navigation with several combinations of possible navigation aids that have been suggested for the shuttle. The SS-FTS can be reconfigured to study different guidance and navigation concepts by changing only the computer software, and adapted to receive different radio navigation information through minimum hardware changes. All control laws, logic, and mode interlocks reside solely in the computer software.

Hegarty, D. M.↗