Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RISE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

A mechanism for stimulating AGN feedback by lifting gas in massive galaxies

Observation shows that nebular emission, molecular gas, and young stars in giant galaxies are associated with rising X-ray bubbles inflated by radio jets launched from nuclear black holes. We propose a model where molecular clouds condense from low-entropy gas caught in the updraft of rising X-ray bubbles. The low-entropy gas becomes thermally unstable when it is lifted to an altitude where its cooling time is shorter than the time required to fall to its equilibrium location in the galaxy, i.e., t{sub c}/t{sub I}≲1. The infall speed of a cloud is bounded by the lesser of its free-fall and terminal speeds, so that the infall time here can exceed the free-fall time by a significant factor. This mechanism is motivated by Atacama Large Millimeter Array observations revealing molecular clouds lying in the wakes of rising X-ray bubbles with velocities well below their free-fall speeds. Our mechanism would provide cold gas needed to fuel a feedback loop while stabilizing the atmosphere on larger scales. The observed cooling time threshold of ∼5×10{sup 8} yr—the clear-cut signature of thermal instability and the onset of nebular emission and star formation—may result from the limited ability of radio bubbles to lift low-entropy gas to altitudes where thermal instabilities can ensue. Outflowing molecular clouds are unlikely to escape, but instead return to the central galaxy in a circulating flow. We contrast our mechanism to precipitation models where the minimum value of t{sub c}/t{sub ff}≲10 triggers thermal instability, which we find to be inconsistent with observation.

79 ASTRONOMY AND ASTROPHYSICS↗

Temporal Variation of the Rotation of the Solar Mean Magnetic Field

Based on continuous wavelet transformation analysis, the daily solar mean magnetic field (SMMF) from 1975 May 16 to 2014 July 31 is analyzed to reveal its rotational behavior. Both the recurrent plot in Bartels form and the continuous wavelet transformation analysis show the existence of rotational modulation in the variation of the daily SMMF. The dependence of the rotational cycle lengths on solar cycle phase is also studied, which indicates that the yearly mean rotational cycle lengths generally seem to be longer during the rising phase of solar cycles and shorter during the declining phase. The mean rotational cycle length for the rising phase of all of the solar cycles in the considered time is 28.28 ± 0.67 days, while for the declining phase it is 27.32 ± 0.64 days. The difference of the mean rotational cycle lengths between the rising phase and the declining phase is 0.96 days. The periodicity analysis, through the use of an auto-correlation function, indicates that the rotational cycle lengths have a significant period of about 10.1 years. Furthermore, the cross-correlation analysis indicates that there exists a phase difference between the rotational cycle lengths and solar activity.

79 ASTRONOMY AND ASTROPHYSICS↗

CHIRALITY AND MAGNETIC CONFIGURATIONS OF SOLAR FILAMENTS

It has been revealed that the magnetic topology in the solar atmosphere displays hemispheric preference, i.e., helicity is mainly negative/positive in the northern/southern hemispheres, respectively. However, the strength of the hemispheric rule and its cyclic variation are controversial. In this paper, we apply a new method based on the filament drainage to 571 erupting filaments from 2010 May to 2015 December in order to determine the filament chirality and its hemispheric preference. It is found that 91.6% of our sample of erupting filaments follows the hemispheric rule of helicity sign. It is also found that the strength of the hemispheric preference of the quiescent filaments decreases slightly from ∼97% in the rising phase to ∼85% in the declining phase of solar cycle 24, whereas the strength of the intermediate filaments keeps a high value around 96 ± 4% at all times. Only the active-region filaments show significant variations. Their strength of the hemispheric rule rises from ∼63% to ∼95% in the rising phase, and keeps a high value of 82% ± 5% during the declining phase. Furthermore, during a half-year period around the solar maximum, their hemispheric preference totally vanishes. Additionally, we also diagnose the magnetic configurations of the filaments based on our indirect method and find that in our sample of erupting events, 89% are inverse-polarity filaments with a flux rope magnetic configuration, whereas 11% are normal-polarity filaments with a sheared arcade configuration.

79 ASTRONOMY AND ASTROPHYSICS↗

Properties of Magnetars Mimicking {sup 56}Ni-Powered Light Curves in Type IC Superluminous Supernovae

Many Type Ic superluminous supernovae have light-curve decline rates after their luminosity peak, which are close to the nuclear decay rate of {sup 56}Co, consistent with the interpretation that they are powered by {sup 56}Ni and possibly pair-instability supernovae. However, their rise times are typically shorter than those expected from pair-instability supernovae, and Type Ic superluminous supernovae are often suggested to be powered by magnetar spin-down. If magnetar spin-down is actually a major mechanism to power Type Ic superluminous supernovae, it should be able to produce decline rates similar to the {sup 56}Co decay rate rather easily. In this study, we investigate the conditions for magnetars under which their spin-down energy input can behave like the {sup 56}Ni nuclear decay energy input. We find that an initial magnetic field strength within a certain range is sufficient to keep the magnetar energy deposition within a factor of a few of the {sup 56}Co decay energy for several hundreds of days. Magnetar spin-down needs to be by almost pure dipole radiation with the braking index close to three to mimic {sup 56}Ni in a wide parameter range. Not only late-phase {sup 56}Co-decay-like light curves, but also rise time and peak luminosity of most {sup 56}Ni-powered light curves can be reproduced by magnetars. Bolometric light curves for more than 700 days are required to distinguish the two energy sources solely by them. We expect that more slowly declining superluminous supernovae with short rise times should be found if they are mainly powered by magnetar spin-down.

79 ASTRONOMY AND ASTROPHYSICS↗

Formation of Galactic Prominence in the Galactic Central Region

We carried out 2.5-dimensional resistive MHD simulations to study the formation mechanism of molecular loops observed by Fukui et al. in the Galactic central region. Since it is hard to form molecular loops by lifting up dense molecular gas, we study the formation mechanism of molecular gas in rising magnetic arcades. This model is based on the in situ formation model of solar prominences, in which prominences are formed by cooling instability in helical magnetic flux ropes formed by imposing converging and shearing motion at footpoints of the magnetic arch anchored to the solar surface. We extended this model to Galactic center scale (a few hundreds of parsecs). Numerical results indicate that magnetic reconnection taking place in the current sheet that formed inside the rising magnetic arcade creates dense blobs confined by the rising helical magnetic flux ropes. Thermal instability taking place in the flux ropes forms dense molecular filaments floating at high Galactic latitude. The mass of the filament increases with time and can exceed 10{sup 5} M{sub ⊙}.

79 ASTRONOMY AND ASTROPHYSICS↗

Magnetohydrodynamic Modeling of Solar Coronal Dynamics with an Initial Non-force-free Magnetic Field

The magnetic fields in the solar corona are generally neither force-free nor axisymmetric and have complex dynamics that are difficult to characterize. Here we simulate the topological evolution of solar coronal magnetic field lines (MFLs) using a magnetohydrodynamic model. The simulation is initialized with a non-axisymmetric non-force-free magnetic field that best correlates with the observed vector magnetograms of solar active regions (ARs). To focus on these ideas, simulations are performed for the flaring AR 11283 noted for its complexity and well-documented dynamics. The simulated dynamics develops as the initial Lorentz force pushes the plasma and facilitates successive magnetic reconnections at the two X-type null lines present in the initial field. Importantly, the simulation allows for the spontaneous development of mass flow, unique among contemporary works, that preferentially reconnects field lines at one of the X-type null lines. Consequently, a flux rope consisting of low-lying twisted MFLs, which approximately traces the major polarity inversion line, undergoes an asymmetric monotonic rise. The rise is attributed to a reduction in the magnetic tension force at the region overlying the rope, resulting from the reconnection. A monotonic rise of the rope is in conformity with the standard scenario of flares. Importantly, the simulated dynamics leads to bifurcations of the flux rope, which, being akin to the observed filament bifurcation in AR 11283, establishes the appropriateness of the initial field in describing ARs.

79 ASTRONOMY AND ASTROPHYSICS↗

Statistical Distributions of Optical Flares from Gamma-Ray Bursts

We statistically study gamma-ray burst (GRB) optical flares from the Swift /UVOT catalog. We compile 119 optical flares, including 77 flares with redshift measurements. Some tight correlations among the timescales of optical flares are found. For example, the rise time is correlated with the decay time, and the duration time is correlated with the peak time of optical flares. These two tight correlations indicate that longer rise times are associated with longer decay times of optical flares and also suggest that broader optical flares peak at later times, which are consistent with the corresponding correlations of X-ray flares. We also study the frequency distributions of optical flare parameters, including the duration time, rise time, decay time, peak time, and waiting time. Similar power-law distributions for optical and X-ray flares are found. Our statistic results imply that GRB optical flares and X-ray flares may share the similar physical origin, and both of them are possibly related to central engine activities.

79 ASTRONOMY AND ASTROPHYSICS↗

SN 2012fr: Ultraviolet, Optical, and Near-infrared Light Curves of a Type Ia Supernova Observed within a Day of Explosion

We present detailed ultraviolet, optical, and near-infrared light curves of the Type Ia supernova (SN) 2012fr, which exploded in the Fornax cluster member NGC 1365. These precise high-cadence light curves provide a dense coverage of the flux evolution from -12 to +140 days with respect to the epoch of B-band maximum (${t}_{{B}_{\max }}$). Supplementary imaging at the earliest epochs reveals an initial slow and nearly linear rise in luminosity with a duration of ~2.5 days, followed by a faster rising phase that is well reproduced by an explosion model with a moderate amount of 56 Ni mixing in the ejecta. From our analysis of the light curves, we conclude that: (i) the explosion occurred < 22 hr before the first detection of the supernova, (ii) the rise time to peak bolometric (λ >1800) luminosity was 16.5 ± 0.6 days, (iii) the supernova suffered little or no host-galaxy dust reddening, (iv) the peak luminosity in both the optical and near-infrared was consistent with the bright end of normal Type Ia diversity, and (v) 0.60 ± 0.15 M ⊙ of 56 Ni was synthesized in the explosion. Despite its normal luminosity, SN 2012fr displayed unusually prevalent high-velocity Ca ii and Si ii absorption features, and a nearly constant photospheric velocity of the Si ii λ6355 line at ~12,000 km s -1 that began ~5 days before ${t}_{{B}_{\max }}$. We also highlight some of the other peculiarities in the early phase photometry and the spectral evolution. SN 2012fr also adds to a growing number of Type Ia supernovae that are hosted by galaxies with direct Cepheid distance measurements.

79 ASTRONOMY AND ASTROPHYSICS↗

The Atacama Cosmology Telescope: Detection of Millimeter-wave Transient Sources

Here we report on the serendipitous discovery of three transient millimeter-wave sources using data from the Atacama Cosmology Telescope. The first, detected at R.A. = 273.8138, decl. = -49.4628 at ~50σ total, brightened from less than 5 mJy to at least 1100 mJy at 150 GHz with an unknown rise time shorter than 13 days, during which the increase from 250 mJy to 1100 mJy took only 8 minutes. Maximum flux was observed on 2019 November 8. The source's spectral index in flux between 90-150 GHz was positive, α = 1.5 ± 0.2. The second, detected at R.A. = 105.1584, decl. = -11.2434 at ~20σ total, brightened from less than 20 mJy to at least 300 mJy at 150 GHz with an unknown rise time shorter than 8 days. Maximum flux was observed on 2019 December 15. Its spectral index was also positive, α = 1.8 ± 0.2. The third, detected at R.A. = 301.9952, decl. = 16.1652 at ~40σ total, brightened from less than 8 mJy to at least 300 mJy at 150 GHz over a day or less but decayed over a few days. Maximum flux was observed on 2018 September 11. Its spectrum was approximately flat, with a spectral index of α = -0.2 ± 0.1. None of the sources were polarized to the limits of these measurements. The two rising-spectrum sources are coincident in position with M and K stars, while the third is coincident with a G star.

79 ASTRONOMY AND ASTROPHYSICS↗

Estimates of climate system properties incorporating recent climate change

Abstract. Historical time series of surface temperature and ocean heat content changes are commonly used metrics to diagnose climate change and estimate properties of the climate system. We show that recent trends, namely the slowing of surface temperature rise at the beginning of the 21st century and the acceleration of heat stored in the deep ocean, have a substantial impact on these estimates. Using the Massachusetts Institute of Technology Earth System Model (MESM), we vary three model parameters that influence the behavior of the climate system: effective climate sensitivity (ECS), the effective ocean diffusivity of heat anomalies by all mixing processes (Kv), and the net anthropogenic aerosol forcing scaling factor. Each model run is compared to observed changes in decadal mean surface temperature anomalies and the trend in global mean ocean heat content change to derive a joint probability distribution function for the model parameters. Marginal distributions for individual parameters are found by integrating over the other two parameters. To investigate how the inclusion of recent temperature changes affects our estimates, we systematically include additional data by choosing periods that end in 1990, 2000, and 2010. We find that estimates of ECS increase in response to rising global surface temperatures when data beyond 1990 are included, but due to the slowdown of surface temperature rise in the early 21st century, estimates when using data up to 2000 are greater than when data up to 2010 are used. We also show that estimates of Kv increase in response to the acceleration of heat stored in the ocean as data beyond 1990 are included. Further, we highlight how including spatial patterns of surface temperature change modifies the estimates. We show that including latitudinal structure in the climate change signal impacts properties with spatial dependence, namely the aerosol forcing pattern, more than properties defined for the global mean, climate sensitivity, and ocean diffusivity.

Libardoni, Alex G.↗

Impacts of land use change and elevated CO 2 on the interannual variations and seasonal cycles of gross primary productivity in China

Climate change, rising CO 2 concentration, and landuse and land cover change (LULCC) are primary driving forces for terrestrialgross primary productivity (GPP), but their impacts on the temporal changesin GPP are uncertain. In this study, the effects of the three main factorson the interannual variation (IAV) and seasonal cycle amplitude (SCA) of GPPin China were investigated using 12 terrestrial biosphere models from theMulti-scale Synthesis and Terrestrial Model Intercomparison Project. Thesimulated ensemble mean value of China's GPP between 1981 and 2010, drivenby common climate forcing, LULCC and CO 2 data, was found to be7.4±1.8 Pg C yr -1 . In general, climate was the dominant controlfactor of the annual trends, IAV and seasonality of China's GPP. Theoverall rising CO2 led to enhanced plant photosynthesis, thusincreasing annual mean and IAV of China's total GPP, especially innortheastern and southern China, where vegetation is dense. LULCC decreasedthe IAV of China's total GPP by ~7%, whereas rising CO 2 induced an increase of 8 %. Compared to climate change andelevated CO 2 , LULCC showed less contributions to GPP's temporalvariation, and its impact acted locally, mainly in southwestern China.Furthermore, this study also examined subregional contributions to thetemporal changes in China's total GPP. Southern and southeastern Chinashowed higher contributions to China's annual GPP, whereas southwestern andcentral parts of China explained larger fractions of the IAV in China's GPP.

54 ENVIRONMENTAL SCIENCES↗

Drag of a Supercritical Body of Revolution in Free Flight at Transonic Speeds and Comparison with Wind Tunnel Data

The forebody drag of a supercritical body of revolution was measured in free flight over a Mach number range of 0.85 to 1.05 and a Reynolds number range of 11.5 x 10 to the 6th power to 19.4 x 10 to the 6th power and was compared with wind-tunnel data. The forebody drag coefficient for a Mach number less than 0.96 was 0.111 compared with the wind-tunnel value of 0.103. A gradual increase in the drag occurred in the Langley 8-foot transonic pressure tunnel at a lower Mach number than in the Langley 16-foot transonic tunnel or in the free-flight test. The sharp drag rise occurred near Mach 0.98 in free flight whereas the rise occurred near Mach 0.99 in the Langley 16-foot transonic tunnel. The sharp rise was not as pronounced in the Langley 8-foot transonic pressure tunnel and was probably affected by tunnel-wall-interference effects. The increase occurred more slowly and at a higher Mach number. These results indicate that the drag measurements made in the wind tunnels near Mach 1 were significantly affected by the relative size of the model and the wind tunnel.

Usry, J. W.↗

Behavior of spherical balloons in wind shear layers.

Analysis of the response of rising spherical balloons to a constant wind shear condition. Wind shear tends to produce a terminal rise rate that is less than the terminal rise rate in the absence of wind shear by no more than 1% of the wind shear and a horizontal balloon velocity defect relative to the local wind with magnitude less than or about equal to 0.2 of the wind shear for most meteorological balloons. An analysis of the behavior of a balloon in a wind field in which the wind shear varies along the vertical is also presented.

Fichtl, G. H.↗

Effects of fineness and closure ratios on boattail drag of circular-arc-afterbody models with jet exhaust at Mach numbers up to 1.3

The effects of variations in fineness ratio and closure ratio on the boattail drag of circular-arc afterbody models were investigated at static conditions and at Mach numbers from 0.40 to 1.30. Jet total-pressure ratio was varied from jet off to about 6, depending on Mach number. Reynolds number based on model maximum diameter varied from about 1.2 million to 2.18 million. Angle of attack was varied from -4 deg to 8 deg. The results indicate that, at subsonic speeds before the drag rise and at a scheduled pressure ratio, the total drag (pressure plus calculated skin friction) is approximately equal for configurations with the same closure ratio. Also, for configurations with the same closure ratio, increasing fineness ratio results in an increased drag-rise Mach number; and for configurations with the same fineness ratio, increasing closure ratio results in an increased drag-rise Mach number.

Reubush, D. E.↗

Hydrostatics and steady dynamics of spatially varying electromechanical flow structures

The hydrostatic and steady laminar hydrodynamic equilibria of spatially varying electromechanical flow structures are investigated. Under certain conditions the relationship between the dielectric height of rise and the applied voltage is found to be double valued. It is found that one of the two equilibrium values is always unstable. This gives rise to the experimentally observed spontaneous rise of the fluid to the top of the structure, once a certain critical voltage is reached. Starting above this critical voltage with the structure completely filled and decreasing the applied voltage toward the critical value results in pinch-in failure at an intermediate point along the structure and trapping of dielectric fluid at the top. The simple mathematical model developed predicts all these phenomena, without recourse to tedious point-by-point surface force equilibrium determination. Experiments are reported which verify the results for the hydrostatic case.

Jones, T. B.↗

Single-stage experimental evaluation of tandem-airfoil rotor and stator blading for compressors, part 8

An experimental investigation was conducted with an 0.8 hub/tip ratio, single-stage, axial flow compressor to determine the potential of tandem-airfoil blading for improving the efficiency and stable operating range of compressor stages. The investigation included testing of a baseline stage with single-airfoil blading and two tandem-blade stages. The overall performance of the baseline stage and the tandem-blade stage with a 20-80% loading split was considerably below the design prediction. The other tandem-blade stage, which had a rotor with a 50-50% loading split, came within 4.5% of the design pressure rise (delta P(bar)/P(bar) sub 1) and matched the design stage efficiency. The baseline stage with single-airfoil blading, which was designed to account for the actual rotor inlet velocity profile and the effects of axial velocity ratio and secondary flow, achieved the design predicted performance. The corresponding tandem-blade stage (50-50% loading split in both blade rows) slightly exceeded the design pressure rise but was 1.5 percentage points low in efficiency. The tandem rotors tested during both phases demonstrated higher pressure rise and efficiency than the corresponding single-airfoil rotor, with identical inlet and exit airfoil angles.

Brent, J. A.↗

Weak incident shock interactions with Mach 8 laminar boundary layers

Weak shock-wave interactions with boundary layers on a flat plate were investigated experimentally in Mach 8 variable-density tunnel for plate-length Reynolds numbers. The undisturbed boundary layers were laminar over the entire plate length. Pressure and heat-transfer distributions were obtained for wedge-generated incident shock waves that resulted in pressure rises ranging from 1.36 to 4.46 (both nonseparated and separated boundary-layer flows). The resulting heat-transfer amplifications ranged from 1.45 to 14. The distributions followed established trends for nonseparated flows, for incipient separation, and for laminar free-interaction pressure rises. The experimental results corroborated established trends for the extent of the pressure rise and for certain peak heat-transfer correlations.

Kaufman, L. G., II↗

Eutectic superalloys by edge-defined, film-fed growth

The feasibility of producing directionally solidified eutectic alloy composites by edge-defined, film-fed growth (EFG) was carried out. The three eutectic alloys which were investigated were gamma + delta, gamma/gamma prime + delta, and a Co-base TaC alloy containing Cr and Ni. Investigations into the compatibility and wettability of these metals with various carbides, borides, nitrides, and oxides disclosed that compounds with the largest (negative) heats of formation were most stable but poorest wetting. Nitrides and carbides had suitable stability and low contact angles but capillary rise was observed only with carbides. Oxides would not give capillary rise but would probably fulfill the other wetting requirements of EFG. Tantalum carbide was selected for most of the experimental portion of the program based on its exhibiting spontaneous capillary rise and satisfactory slow rate of degradation in the liquid metals. Samples of all three alloys were grown by EFG with the major experimental effort restricted to gamma + delta and gamma/gamma prime + delta alloys. In the standard, uncooled EFG apparatus, the thermal gradient was inferred from the growth speed and was 150 to 200 C/cm. This value may be compared to typical gradients of less than 100 C/cm normally achieved in a standard Bridgman-type apparatus. When a stream of helium was directed against the side of the bar during growth, the gradient was found to improve to about 250 C/cm. In comparison, a theoretical gradient of 700 C/cm should be possible under ideal conditions, without the use of chills. Methods for optimizing the gradient in EFG are discussed, and should allow attainment of close to the theoretical for a particular configuration.

Hurley, G. F.↗