Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACTOR COMPONENTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

An ultrasonic method for studying elastic moduli as a function of temperature

Ultrasonic method is used to determine the elastic moduli of materials used in components of high-temperature nuclear reactors. An ultrasonic, pulse-echo technique determines the velocity of sound waves propogating in a heated region of rod-shaped specimens. From these velocities, the elastic moduli are calculated.

Peterson, R. G.↗

Development of an advanced Sabatier CO2 reduction subsystem

A preprototype Sabatier CO2 reduction subsystem was successfully designed, fabricated and tested. The lightweight, quick starting (less than 5 minutes) reactor utlizes a highly active and physically durable methanation catalyst composed of ruthenium on alumina. The use of this improved catalyst permits a simple, passively controlled reactor design with an average lean component H2/CO2 conversion efficiency of over 99% over a range of H2/CO2 molar ratios of 1.8 to 5 while operating with process flows equivalent to a crew size of up to five persons. The subsystem requires no heater operation after start-up even during simulated 55 minute lightside/39 minute darkside orbital operation.

Kleiner, G. N.↗

An experiment to study fullerene formation under reduced gravity

The activity of the summer focused on the design and construction of key components of a carbon arc/inert gas reactor for fullerene production, that is suitable for reduced gravity experiments onboard the KC-135 aircraft. The apparatus will be configured for both floor-mount and free-floating operation providing access to reduction to 10(exp -2) and 10(exp -3) of normal respectively. It is planned to incorporate 'seat belt' restraints that will allow a safe transition from reduced gravity free-float to full gravity, at the end of the parabolic.

Wdowiak, Thomas J.↗

US/CIS integrated NTRE

The paper describes the Nuclear Thermal Energy (NTRE) engine, developed by taking advantage of mature fuel technology developed in the former Soviet Union, thus shortening the development schedule of this engine for moon and Mars explorations. The near-term NTRE engine has a number of features that provide safety, mission performance, cost, and risk benefits. These include: (1) high-temperature long-life CIS fuel, (2) high-pressure recuperated expander cycle, (3) assured restart, (4) long-life cooled nozzle with thin inner wall, (5) long-life turbopumps, (6) heat radiation and electrical power generation, and (7) component integration synergy. Diagrams of the reactor core, the recuperated bottoming cycle flow schematic, and the recuperated bottoming cycle engine schematic are presented.

Bulman, M. J.↗

Fission Surface Power System Initial Concept Definition

Under the NASA Exploration Technology Development Program (ETDP) and in partnership with the Department of Energy (DOE), NASA has embarked on a project to develop Fission Surface Power (FSP) technology. The primary goals of the project are to 1) develop FSP concepts that meet expected surface power requirements at reasonable cost with added benefits over other options, 2) establish a hardwarebased technical foundation for FSP design concepts and reduce overall development risk, 3) reduce the cost uncertainties for FSP and establish greater credibility for flight system cost estimates, and 4) generate the key products to allow NASA decision-makers to consider FSP as a preferred option for flight development. The FSP project was initiated in 2006 as the Prometheus Program and the Jupiter Icy Moons Orbiter (JIMO) mission were phased-out. As a first step, NASA Headquarters commissioned the Affordable Fission Surface Power System Study to evaluate the potential for an affordable FSP development approach. With a cost-effective FSP strategy identified, the FSP team evaluated design options and selected a Preliminary Reference Concept to guide technology development. Since then, the FSP Preliminary Reference Concept has served as a point-of-departure for several NASA mission architecture studies examining the use of nuclear power and has provided the foundation for a series of "Pathfinder" hardware tests. The long-term technology goal is a Technology Demonstration Unit (TDU) integrated system test using full-scale components and a non-nuclear reactor simulator. The FSP team consists of Glenn Research Center (GRC), Marshall Space Flight Center (MSFC) and the DOE National Laboratories at Los Alamos (LANL), Idaho (INL), Oak Ridge (ORNL), and Sandia (SNL). The project is organized into two main elements: Concept Definition and Risk Reduction. Under Concept Definition, the team performs trade studies, develops analytical tools, and formulates system concepts. Under Risk Reduction the team develops hardware prototypes and conducts laboratory-based testing.

Source record↗

Design of a Mechanical NaK Pump for Fission Space Power

Alkali liquid metal cooled fission reactor concepts are under development for spaceflight power requirements. One such concept utilizes a sodium-potassium eutectic (NaK) as the primary loop working fluid, which has specific pumping requirements. Traditionally, electromagnetic linear induction pumps have been used to provide the required flow and pressure head conditions for NaK systems but they can be limited in performance, efficiency, and number of available vendors. The objective of the project was to develop a mechanical NaK centrifugal pump that takes advantages of technology advances not available in previous liquid metal mechanical pump designs. This paper details the design, build, and performance test of a mechanical NaK pump developed at NASA Marshall Space Flight Center. The pump was designed to meet reactor cooling requirements using commercially available components modified for high temperature NaK service.

Mireles, Omar R.↗

Design of a Mechanical NaK Pump for Fission Space Power Systems

Alkali liquid metal cooled fission reactor concepts are under development for mid-range spaceflight power requirements. One such concept utilizes a sodium-potassium eutectic (NaK) as the primary loop working fluid. Traditionally, linear induction pumps have been used to provide the required flow and head conditions for liquid metal systems but can be limited in performance. This paper details the design, build, and check-out test of a mechanical NaK pump. The pump was designed to meet reactor cooling requirements using commercially available components modified for high temperature NaK service.

Mireles, Omar R.↗

Nuclear Thermal Rocket Element Environmental Simulator (NTREES) Upgrade Activities

A key technology element in Nuclear Thermal Propulsion is the development of fuel materials and components which can withstand extremely high temperatures while being exposed to flowing hydrogen. NTREES provides a cost effective method for rapidly screening of candidate fuel components with regard to their viability for use in NTR systems. The NTREES is designed to mimic the conditions (minus the radiation) to which nuclear rocket fuel elements and other components would be subjected to during reactor operation. The NTREES consists of a water cooled ASME code stamped pressure vessel and its associated control hardware and instrumentation coupled with inductive heaters to simulate the heat provided by the fission process. The NTREES has been designed to safely allow hydrogen gas to be injected into internal flow passages of an inductively heated test article mounted in the chamber.

Emrich, William↗

Assessment of Sensor Technologies for Advanced Reactors

Sensors and measurement technologies provide information on processes, support operations and provide indications of component health. They are therefore crucial to plant operations and to commercialization of advanced reactors (AdvRx). This report, developed by a three-laboratory team consisting of Argonne National Laboratory (ANL), Oak Ridge National Laboratory (ORNL) and Pacific Northwest National Laboratory (PNNL), provides an assessment of sensor technologies and a determination of measurement needs for AdvRx. It provides the technical basis for identifying and prioritizing research targets within the instrumentation and control (I&C) Technology Area under the Department of Energy’s (DOE’s) Advanced Reactor Technology (ART) program and contributes to the design and implementation of AdvRx concepts. The report is organized under two broad categories: High Temperature Reactors and Fast Reactors. For the purposes of this report, the scope of “High temperature reactors” includes Gen IV reactors whose coolant exit temperatures exceed ~650 °C and are moderated (as opposed to fast reactors). We included in this category gas-cooled reactors that have been built and operated throughout the world to date-including those that use carbon dioxide (CO 2 ) or Helium (He) as coolant-and the molten salt reactor. However, for the sake of conciseness this report uses the high temperature gas reactor (HTGR) as an example in many cases. With regard to fast reactors, there are several reactor years of experience with several technology variants (including sodium fast reactors and other fast reactors such as the LBFR). In particular, several experimental, prototype and demonstration units have been designed and operated in several countries, including France, India, Japan, USSR/Russia, UK, and the United States. To bound the scope, this report reviewed relevant operating experience from US-operated Sodium Fast Reactor (SFR) and relevant test experience from the Fast Flux Test Facility (FFTF).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Evaluation of Aluminum-clad Spent Nuclear Fuel during Drying and Dry Storage

The DOE SNF Working Group ASNF Subgroup and the U.S. Nuclear Waste Technical Review Board have identified knowledge gaps regarding the management of aluminum-clad spent nuclear fuel (ASNF).[1, 2] The objectives of this research are to observe, sample and analyze the nature of aluminum surface corrosion and corrosion layer chemistry relevant to the ASNF performance over the duration of the dry storage segment of the fuel life cycle. The primary goal is to build an understanding of ASNF behavior, from reactor service and wet storage through drying and dry storage, with parallel testing of surrogate materials. The premise is that residual water affiliated with the aluminum oxide from corrosion during reactor service and wet storage, continues to influence ASNF performance during dry storage, and that even after successful drying the surface conditions of ASNF have yet to be satisfactorily characterized. The initial scope collected and analyzed specimens from irradiated non-fuel components of aluminum-clad Advanced Test Reactor (ATR) fuel elements that are routinely removed at the end of reactor service life. Techniques have been developed for remote material sampling from ATR elements from vented dry storage at the Irradiated Fuel Storage Facility (IFSF). These techniques involve 1) nipping off a small corner of the aluminum near where the end box had been removed and 2) scraping the exterior (non-fueled) plate surface to collect an oxide sample. This second effort targets ATR elements expected to have seen the longest residence in storage, both in the CPP-603 pool (with poor water quality) and in dry storage at IFSF, within the fuel handling scheduled to consolidate ATR at IFSF and receive the remaining inventory at CPP-666. Follow on work has been proposed to nip corners and collect scrapings immediately following ATR fuel drying, before placement in dry storage. Sample analysis will use multiple techniques to understand the chemical composition and morphology of the surface oxides. A simultaneous effort is progressing to develop surrogate materials to enable rigorous controlled experiments. Consistently produced, these surrogate materials can then be used to demonstrate limitations inherent to remote sampling and to validate performance models under relevant constraints. The combined efforts will substantiate ASNF performance and fuel management decisions regarding drying and packaging over a more complete range of life cycle conditions. [1] DOE Spent Nuclear Fuel Working Group, Aluminum-Clad Spent Nuclear Fuel: Technical Considerations and Challenges for Extended (>50 Years) Dry Storage, DOE/ID RPT#: 1575, prepared by Aluminum-Clad SNF Sub Working Group, June 2017. [2] U.S. Nuclear Waste Technical Review Board, Management and Disposal of U.S. Department of Energy Spent Nuclear Fuel, A Report to the United States Congress and the Secretary of Energy, December 2017, p. 143.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Regulatory Development for Advanced Manufacturing

Advanced Methods of Manufacturing (AMM) are new, novel manufacturing processes that have the potential to bring significant cost and schedule reductions to many industries, including the nuclear industry. These methods produce components faster and cheaper than many traditional methods. This includes replacing obsolete components at currently operating plants as well as manufacturing components of all sizes for advanced reactors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Topological Defects in Graphite under Irradiation using Molecular Dynamics

Graphite is the preferred material for moderating elements and structural components in a Very High Temperature Reactor (VHTR). It has a layered structure with basal planes constituted by carbon atoms arranged in a hexagonal lattice. Graphite accommodates a wide variety of defects such as vacancies, interstitials, and dislocation loops; a detailed description can be found in a review paper by Telling and Heggie. The layered configuration in graphite engenders energetic conditions that favor the formation of topological defects. Unlike the interlayer defects, which often are sp{sup 3} hybridized, topological defects maintain their sp{sup 2} bond connectivity. Several types of topological defects are known to arise in graphite; one of the most recognizable defects corresponds to a 5-7 Stone-Wales (SW) configuration that arises by a simple rotation of bonds. While the bond rotations result in a defected configuration, each carbon atom is still bonded to three other carbon atoms in the SW configuration, albeit with different bond lengths. Topological defects are expected to arise in irradiated graphite. A recent investigation with Raman and XPS spectroscopy have concluded that a large number of such defects are generated under neutron irradiation; an earlier ab-initio investigation has also arrived at the same conclusion. While several molecular dynamics (MD) simulations have been reported on irradiated graphite in the past, none have characterized the evolution of defects that are topological in nature. Using MD simulations, the current investigation quantifies the evolution and the distribution of topological defects under irradiation. Using MD simulations, we establish the presence of 5 and 7 membered topological defects in graphite following radiation. There is a greater probability for the formation of a 7 member ring relative to that of a 5 member ring. Since a heptagon causes a lower distortion to the 120 deg. bond angle of the sp{sup 2} hybridized orbital than a pentagon it is plausible to expect a larger number of 7 member rings following a radiation perturbation. Using a spatial distribution analysis, we have verified that 7 member rings tend to stay adjacent to 5 member rings as in Stone-Wales (SW) configuration. Since there are unequal number of 5 and 7 member rings, it follows that there are several isolated 7 member topological defects in graphite following radiation, possibly connected to dangling bonds or non-planar (sp{sup 3}) defects.

36 MATERIALS SCIENCE↗

Using FLAC{sup R} Modeling Software to Analyze the Stability of a LLRW Disposal Facility - 20031

Waste Control Specialists (WCS) wished to amend its existing LLRW disposal license such that it might use gravel aggregate instead of concrete as backfill around large component (LC) parts from decommissioned nuclear reactors. A classical mechanics evaluation of the strength of the LCs was presented to the Texas Commission on Environmental Quality (TCEQ), demonstrating that the LCs had adequate capacity to withstand the loads within the facilities, and that concrete was unnecessary for structural support. TCEQ requested that additional analyses of the LCs within the facilities be performed using FLAC{sup R} finite difference modeling software. Because FLAC{sup R} has the capability of modeling the support provided by the lateral earth pressures, the factors of safety against failure for the LCs increased. TCEQ found the FLAC{sup R} analyses presented in this report to be satisfactory, and granted WCS' license amendment request. This work demonstrates that FLAC{sup R} may be used advantageously to more accurately represent the complexities of the physical situation being modeled. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

SaltStone Wastewater Cement Study Using Isothermal Calorimetry, Standard Concrete Characterization Techniques, and CemGEMS - 25169

Cementitious reagents are used to solidify/stabilize aqueous radioactive, hazardous, and mixed salt solutions, and sludges to meet low-level radioactive waste (LLW) and Resource Conservation and Recovery Act (RCRA) requirements for disposal at Department of Energy (DOE). It is flexible enough to solidify radioactive wastewater saturated in complex species that include but are not limited to radioactive isotopes from the bombardment of neutrons in reactor operation, corrosion products from metallic components, and a variety of soluble organic compounds. [1,2]. Waste form testing typically includes processing or fresh properties, cured properties, compressive strength and hydraulic properties, porosity, density, saturated and unsaturated moisture transport, and leachability of contaminants in the waste form pore solution. Properties are collected over a relatively limited time, typically 28 to 365 days [3]. In addition, changes in the waste form as the result of time and changing conditions are important for concrete engineers to predict overall performance of the forms and potential release of contaminants in the disposal process via unintended filtration into the environment [4]. These predictions are determined/calculated characterizing young waste forms (relative to the standard age of concrete) and are based on transport through soluble ions in pore solutions. Characterization methods include X-ray, SEM, and isothermal calorimetry among other methods used to define the composition, amorphous vs. crystalline nature of the components, and the energetic formation mechanisms for multi-phase mineral systems. [5–7] Isothermal calorimetry is a well standardized technique for cements and concretes and can be used to predict the timing and nature of the hydration reactions.[8] The technique can measure long term energetic

Bustamante, Michael E. [Savannah River National La↗

Creep and Environmental Effects on High Temperature Creep-Fatigue Behavior of Alloy 617

Alloy 617 is the leading candidate material for Intermediate Heat Exchanger (IHX) of a Very High Temperature Reactor (VHTR), expected to have an outlet temperature as high as 950 C. System start-ups and shut-downs as well as power transients will produce low cycle fatigue (LCF) loadings of components. Acceptance of Alloy 617 in Section III of the ASME Code for nuclear construction requires a detailed understanding of the creep-fatigue behavior in both air and impure helium, representative of the VHTR primary coolant. Strain controlled LCF tests including hold times at maximum tensile strain were conducted at total strain range of 0.3% in air at 950 C. Creep-fatigue testing was also performed in a simulated VHTR impure helium coolant for selected experimental conditions. The fatigue resistance decreased when a hold time was added at peak tensile stress, consistent with the observed change in fracture mode from transgranular to intergranular with introduction of a tensile hold. Increases in the tensile hold time, beyond 180 sec, was not detrimental to the creep-fatigue resistance. Grain boundary damage in the form of grain boundary cracking was present in the bulk of the creep-fatigue specimens. This bulk cracking was quantified and found to be similar for hold times of up to 1800 sec consistent with the saturation in failure lives and rapid stress relaxation observed during the creep portion of the creep-fatigue cycle.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Q-value (MeV/fission) Determination for the Advanced Test Reactor

This report documents a step-by-step procedure that can be used to calculate a Q-value for the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL). The Q-value calculation here is an estimate of the total energy released per fission event in the ATR driver fuel in units of MeV/fission and is recognized as a reactor-specific Q-value for the ATR. Such a Q-value is needed INL ATR reactor physicists to normalize calculated fluxes and reaction rates to measured ATR total core and lobe powers. The calculated ATR Q-value and the procedure used to calculate this value are presented in a detailed manner so as to establish a credible basis, such that this single Q-value can be used consistently among all ATR reactor physicists. A Q-value is essentially the summation of all the kinetic energy from all radiation components released from a single fission event that ends up as heat in the reactor coolant. Estimation of a Q-value for a given reactor can theoretically be very complex because it is dependent on several variables, which include (1) the materials in the reactor core, (2) the neutron energy spectrum, and (3) the mix of actinide isotopes that are being simultaneously fissioned. Since these three variables can potentially change over time or with reactor burnup, this potentially makes the Q-value a time-dependent quantity. However, for ATR, we will invoke some simplifying assumptions, based on the unique features of the ATR core and supported by neutronic calculations, which will reduce the complexity of the problem and lead to a single time-independent Q-value. Of the three variables, the materials in the core have the greatest impact on the ATR Q-value. Since the materials in the core are most important, an array of components (materials) have been carefully selected to compose a typical ATR core configuration. It should be noted that the step-by-step procedure here for calculating a reactor-specific Q-value can be applied to any nuclear reactor. In a more general procedure, if one needed to include time-dependent spectral and actinide composition changes as a function of burnup for a specific reactor, this procedure can still be used, but at discrete time steps throughout the burnup. The result will be a set of discrete Q-values as a function of burnup. However, here we will apply the procedure to the ATR, as an example, and obtain a single Q-value that is valid for the ATR reactor as a function of burnup. In the evaluated nuclear data file (ENDF), Q-values for specific actinides are known for a reasonably high degree of accuracy, especially the major uranium and plutonium isotopes. The isotopic Q-values are composed of the kinetic energy of the fission fragments and the energies of the various radiation components emitted from the fission event. One complication is the fact that some of these energy components are dependent on the incident neutron energy (EINC) that induces the fission event (neutron energy spectrum dependence). For ATR, we will estimate an average neutron energy based on the neutron energy flux weighted by the fission cross sections and use this average neutron energy value in the ENDF formulas. This neutron energy dependence is one of two dependencies that make the final ATR Q-value a reactor-specific value. The second dependency, and the most important variable for ATR, involves the materials in the core and the de-excitation radiations produced from neutron radiative capture radiation; radiation energy that becomes heat in the reactor coolant. This important dependency is discussed in detail below. The third dependency, or the mix of fissioning actinides as a function of ATR burnup, is ignored because the bulk of the fissions over a cycle are always due to U-235 in the high-enriched ATR core. In a fission event, the fission energy is partitioned between the fission fragments and the radiation components that include neutrons, gamma rays, and beta particles. The main variable that makes the calculated Q-value reactor-specific is the amount of radiative capture energy produced in the core due to prompt and delayed neutron capture in the reactor core materials and the subsequent release of nuclear binding energy in the form of de-excitation gamma radiation energy in the reactor core. This energy component, neutron radiative capture energy, is not in the ENDF, because it depends on the reactor and its core materials. The radiative capture gamma energy release can be significant, or approximately 3–12 MeV/fission depending on the materials in the reactor core (fuel materials, cladding, structural components, coolant, targets, reflector, etc.). For the ATR, the energy released from radiative capture gamma radiation is calculated to be near the middle of the 3–12 MeV range. This makes the radiative capture radiation component an important and significant contribution to the total ATR Q-value. The ATR has unique reactor features that will allow us to simplify the complex procedure for determining an ATR reactor-specific Q-value. For example, the ATR is a thermal reactor and contains high-enriched fuel (93.15 wt% U-235). Consequently, the bulk of the fissions in the ATR core from beginning-of-cycle (BOC) to end-of-cycle are from U-235. Even though U-238 makes up approximately 7% of the uranium atoms in the fuel, the number of fissions relative to U-235 is insignificant, since U-238 is fertile and ATR is a thermal reactor. The same is true for U-234 and U-236 (both fertile). The ATR’s high-enriched uranium fuel also inhibits the buildup of large quantities of plutonium isotopes. So, even though there is some buildup of U-236, Np-237, and Pu-239 in the ATR driver fuel, the impact or contribution of these isotopes fissions on the ATR Q-value is minor compared to U-235. Nonetheless, we will include fission contributions from all the major uranium isotopes (U-234, U-235, U-236, and U-238) in the determination of an average isotopic Q-value that is used in the ATR Q-value determination. Although the ATR Q-value calculated here is based on BOC conditions (fresh fuel with no higher order actinide buildup), it is believed that the ATR Q-value is relatively constant with burnup or during any given ATR power cycle (14–60 days). The reason is that the vast majority of the core driver fuel fissions are always from U-235 during the cycle. Also, since we effectively assume instantaneous energy release for the fission product gammas and beta particles and delayed neutrons from a fission event, this corresponds to equilibrium conditions for all fission product concentrations in the ATR driver fuel too. The goal of this effort was to determine a specific numerical and core-average Q-value for the recoverable energy released by a single fission event (MeV/fission) for the ATR. This calculated value has the potential to help standardize and add credibility to not only the Monte Carlo tally normalization process used by many ATR core physics analysts, but also to the normalization process for all reactor physics calculation methods involving ATR analyses. Currently, the ATR core physics analysts use slightly different Q-values. Some values are known to be conservative for specific applications. However, sometimes a more accurate Q-value is needed for the calculation in which ATR test specimens require non-conservative and as-accurate-as-possible Q-values to estimate burnups, heat rates, neutron fluxes, nuclear reaction rates, etc., where corresponding measured post-irradiation examination data provides the ultimate validation for the calculated results. A detailed Q-value procedure was developed and is outlined in this document along with numerical values calculated specifically for the determination of the ATR Q-value. This report attempts to document in some detail the calculation methodology, nuclear data, computer code, computer model, code calculated results, hand calculations, assumptions, and logic that went into the determination of the ATR Q-value.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗