On the reduced damage tolerance of fine-grained nuclear graphite at elevated temperatures using in situ 4D tomographic imaging
Not Available
36 MATERIALS SCIENCE↗
SEARCH · Engineering Papers
Results for “RAMAN SPECTROSCOPY”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Resonant Raman in armchair graphene nanoribbons from first-principles
Resonant Raman spectra of armchair graphene nanoribbons (AGNRs) are computed using Density Functional Theory (DFT) and third-order perturbation theory. Results are benchmarked against available experimental data and compared to previously used theoretical approaches based on the Placzek approximation. Comparable agreement with experiments is found for both previously and presently used methods. In addition, a numerical analysis is carried out to provide a justification for the resonant modeling method based on the use of the frequency-dependent dielectric tensor in the Placzek approximation. Finally, this work also provides additional predictions and references for wide AGNRs that might be investigated with Raman scattering experiments in the future.
42 ENGINEERING↗
Formation of hydrocarbons favored by high pressure at subduction zone conditions
Subduction zones enable carbon transport to the deep Earth. Inorganic and organic carbon in fluids released from the subducted slab are important in water-rock interactions. However, the potential role of reduced carbon species in fluids during subduction is still unclear. In particular, the pressure, temperature, and oxidation state conducive to the formation of fluid hydrocarbons are poorly understood. Here we focused on the role of pressure influencing the formation of hydrocarbons using diamond anvil cell experiments starting with 0.5 M Ca-acetate solutions over a broad range of pressures, from 1.6 to 4.6 GPa at temperatures of 300 and 350°C. Droplets of immiscible hydrocarbon fluid coexisting with aqueous carbonate or bicarbonate and crystals of calcite or aragonite were formed at peak pressure and temperature conditions in the experiments. Furthermore, greater quantities of hydrocarbons formed at higher pressure as revealed by measuring the in situ volume percent of the droplets. Measurement of the in situ Raman spectra of the co-existing aqueous solutions and analysis of the peak area ratios of acetate to HCO 3 – showed faster decrease at higher pressure, which indicated that the reactions forming hydrocarbons were accelerated by pressure. Compared to previous Na-acetate experiments at 300°C and 3.0 GPa, this study found hydrocarbons that were more methane-rich and had more propane and less isobutane. In experiments at 350°C, isobutane transformed to one or more aromatic hydrocarbons in an immiscible fluid. The air-dried aromatic hydrocarbons were measured using a UV laser, and show peaks of bitumen. Overall, our study supports the hypothesis that high pressures and high temperatures facilitate the possible occurrence of immiscible hydrocarbon fluids in the deep carbon cycle.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Angle-resolved polarized Raman study of layered b-As x P x-1 alloys: Identification of As-P vibrational modes
In this study, the polarization-resolved Raman spectra of b-As x P x-1 flakes with varying arsenic concentration (x = 0, 0.4, and 0.8) are systematically investigated. A clear polarization dependence is observed in the Raman intensity of all the P-P, As-P, and As-As modes and confirmed by the first-principles calculations. The observed angle-dependence can be related to the structure of the Raman tensors of each peak. In particular, the Raman intensities corresponding to As-P vibration modes are studied in detail. The out of plane As-P mode ($A$$^{1}_{g}$) is clearly identified, but the butterfly-shaped behavior observed in the polar plot around 350 cm -1 is interpreted as the combination of the two in-plane vibrations, one along the armchair and the other along the zigzag direction. This work allows unambiguous assignment of the $A$$^{1}_{g}$, B 2g , and $A$$^{2}_{g}$ modes of the As-P vibrational modes and the importance of the consideration of the superposition of the in-plane B 2g and $A$$^{2}_{g}$ modes. Such study can be utilized to further characterize the anisotropic structural properties and analyze the local distribution of the As and P in b-As x P x-1 alloys which will play key roles in electronic and optical properties. Furthermore, this methodology can be further extended to alloyed two-dimensional material systems with in-plane anisotropy in general.
2D materials↗
Development of an atmospheric plasma jet device for versatile treatment of electron microscope sample grids
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Structural basis of heme scavenging by the ChtA and HtaA hemophores in Corynebacterium diphtheriae
Corynebacterium diphtheriae causes diphtheria, a potentially fatal infectious disease that damages tissues in the upper respiratory tract. In order to proliferate, this pathogen acquires the essential nutrient iron from heme (iron-protoporphyrin IX) primarily found in human hemoglobin (Hb). C. diphtheriae secretes ChtA and HtaA hemophore proteins that bind ferric heme (hemin) via conserved region (CR) domains. Here, we demonstrate that their CR domains scavenge hemin after it is spontaneously released from Hb, and define the structural basis of hemin binding to ChtA and the N-terminal CR domain from HtaA by determining X-ray crystal structures of their protein-hemin complexes. Resonance Raman and electron paramagnetic resonance experiments demonstrate that the CR domains from ChtA and HtaA engage in pentacoordinate hemin binding through a conserved iron-tyrosyl linkage, though variations in their hemin pockets alter the way they stabilize the axial tyrosine and mask hemin’s metal. The importance of these interactions is probed using isothermal titration calorimetry experiments, which represent the first quantitative assessment of CR-hemin affinity and reveal that ChtA binds hemin via an enthalpically driven process. Hemin partitioning experiments using native mass spectrometry demonstrate that the cohort of CR domains within C. diphtheriae ’s hemin-uptake system have dissociation constants for hemin between 0.8 and 22 nM, raising the possibility that affinity differences contribute to the directional flow of hemin into the cell. Collectively, the results of this work provide insight into how C. diphtheriae and other pathogenic and commensal corynebacterium species utilize CR domains to scavenge iron rich hemin from their environment.
Corynebacterium diphtheriae↗
Disordered interfaces of alkaline aluminate salt hydrates provide glimpses of Al 3+ coordination changes
Hypothesis: The precipitation and dissolution of aluminum-bearing mineral phases in aqueous systems often proceed via changes in both aluminum coordination number and connectivity, complicating molecular-scale interpretation of the transformation mechanism. Here, the thermally induced transformation of crystalline sodium aluminum salt hydrate, a phase comprised of monomeric octahedrally coordinated aluminate which is of relevance to industrial aluminum processing, has been studied. Because intermediate aluminum coordination states during melting have not previously been detected, it is hypothesized that the transition to lower coordinated aluminum ions occurs within a highly disordered quasi-two-dimensional phase at the solid-solution interface. Experiments and simulations: In this work, in situ X-ray diffraction (XRD), Raman and 27 Al nuclear magnetic resonance (NMR) spectroscopy were used to monitor the melting transition of nonasodium aluminate hydrate (NSA, Na 9 [Al(OH) 6 ] 2 ·3(OH)·6H 2 O). A mechanistic interpretation was developed based on complementary classical molecular dynamics (CMD) simulations including enhanced sampling. A reactive forcefield was developed to bridge speciation in the solution and in the solid phase. Findings: In contrast to classical dissolution, aluminum coordination change proceeds through a dynamically stabilized ensemble of intermediate states in a disordered layer at the solid-solution interface. In both melting and dissolution of NSA, octahedral, monomeric aluminum transition through an intermediate of pentahedral coordination. The intermediate dehydroxylates to form tetrahedral aluminate (Al(OH)$_4^–$) in the liquid phase. This coordination change is concomitant with a breaking of the ionic aluminate-sodium ion linkages. The solution phase Al(OH)$_4^–$ ions subsequently polymerize into polynuclear aluminate ions. However, there are some differences between bulk melting and interfacial dissolution, with the onset of the surface-controlled process occurring at a lower temperature (~30 °C) and the coordination change taking place more gradually as a function of temperature. This work to determine the local structure and dynamics of aluminum in the disordered layer provides a new basis to understand mechanisms controlling aluminum phase transformations in highly alkaline solutions.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Corrosion behavior of ferritic FeCrAl alloys in simulated BWR normal water chemistry
Ferritic iron-chromium-aluminum (FeCrAl) alloys with varying Cr content were subjected to in-situ irradiation-corrosion with energetic protons or electron beams in pure water with various oxygen concentrations. Oxide microstructure and composition were characterized to compare the corrosion under irradiation with the thermal corrosion in the same water conditions. The dominant effect seems to be the production of H 2 O 2 at the surface by the intense proton and electron beams. The corrosion potential of FeCrAl under BWR-NWC condition is somewhat above the Cr 2 O 3 /CrO 4 2- phase boundary, oxidizing the Cr(III) to Cr(VI) in the outer part of the film, but with some Cr(III) remaining in the interior of the oxide. The beam increases the corrosion potential, significantly reducing Cr(III) content throughout the oxide. Finally, the crystallites on the surface, which form by re-precipitation from solution, do not contain Cr because at low potential Cr(III) is not soluble, and at high potential Cr(VI) is quite soluble.
36 MATERIALS SCIENCE↗
Optical vibrational spectroscopic signatures related to U 3 O 8 production processes
Uranium ore concentrates are materials found early within the nuclear fuel cycle and contain high concentrations of uranium in an easily transported form, making the concentrates a likely target for illegal diversion. These concentrates are typically converted to U 3 O 8 for further processing and, therefore, may lose specific physicochemical characteristics in determining the materials’ source and processing history. In this work, we explore the Raman spectra of eight oxide samples produced from various uranium ore concentrates and processing pathways to examine the presence of spectroscopic signatures relating to each sample's process history. Samples produced from amine extraction and dialkylphosphoric acid extraction processes show unique characteristics due to high concentrations of α-UO 3 , whereas samples calcinated from metallic diuranates do not form pure α-U 3 O 8 because of metallic ion inclusions. Pure α-U 3 O 8 oxide samples are obtained through calcination of ammonium diuranate, ammonium uranyl carbonate, and metastudtite intermediates. The Raman spectra of these oxide samples show close agreement with pristine α-U 3 O 8 spectra. However, deviations from the pristine spectra are observed in the 300–460 cm -1 spectral range. In conclusion, these deviations are unique identifying signatures that were likely created by lasting effects from the process history. Spectral center of mass calculations indicate grouping of samples based on processing history.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
The influence of iron incorporation on the microstructure and crystal chemistry of UO 2 fuel
The incorporation of dopants into UO 2 is of interest for both doped advanced fuel and nuclear forensics research. Suitable forensics dopants, or taggants, for nuclear fuels are ones that do not adversely affect the performance of the parent material while still being traceable during key stages of the fuel’s life cycle. In this paper, we present our efforts to understand the effects of doping UO 2 with Fe 2 O 3 under multiple parameters, such as Fe concentration (0–3000 wppm), sintering temperature (1673 K, 1773 K, and 1973 K), sintering time (2–12 h), and atmosphere (reducing and inert). Here, we investigated densification behavior, microstructure evolution, and lattice defects based on the geometric densities, scanning electron microscopy (SEM), X-ray diffractograms, and Raman spectra. The effect of Fe on the microstructure and crystal chemistry of UO 2 is very complex, especially at the intermediate temperature (1773 K), where we found that densification kinetics are enhanced and that lattice contraction occurs for doping concentrations greater than 1000 wppm Fe.
Crystallography↗
Frank-van der Merwe growth in bilayer graphene
Bilayer graphene has attracted significant interest because of its unique properties, including fascinating electrical behavior when one layer is slightly rotated relative to the other. However, the quality of large-area bilayer graphene is often limited by the layer-plus-island growth mode in which islands of thicker graphene present as unavoidable impurities. Here, we report the observation of the layer-by-layer, Frank-van der Merwe (FM) growth mode in bilayer graphene where multilayer impurities are suppressed. Instead of the conventional surface adhesive energy, we found it possible to tune interface adhesive energy with an oxidative pretreatment. Finally, the FM-grown bilayer graphene is of AB stacking or with small twisting angle (θ = 0°–5°), which is more mechanically robust compared with monolayer graphene, facilitating a free-standing wet transfer technology.
36 MATERIALS SCIENCE↗
To grind or not to grind? The influence of mechanical and thermal treatments on the $\mathrm{Cu/Zn}$ disorder in $\mathrm{Cu}$ 2 $\mathrm{ZnSn}$($\mathrm{S}$ x $\mathrm{Se}$ 1-x ) 4 monograins
We report that Kesterite-type based thin film solar cell technologies are mainly based on polycrystalline absorber layers. A promising low cost alternative technology uses Cu 2 ZnSn(S x Se 1-x ) 4 (CZTSSe) monograins (single crystals of 20–100 μm size) which are fixed in a polymer matrix to form a flexible solar cell. The Cu/Zn disorder is discussed as a possible reason for band tailing causing voltage losses limiting the efficiency of CZTSSe-based devices. The experimental determination of the order parameter Q which is a quantitative measure of Cu/Zn disorder, requires a differentiation between the isoelectronic cations Cu + and Zn 2+ . An in-depth analysis of neutron diffraction data allows the determination of type and concentration of intrinsic point defects including a distinction between Cu and Zn. Neutron diffraction requires large sample volumes, thus monograins offer the unique possibility to correlate structural disorder in CZTSSe with device performance parameters. In this study we tackle the influence of grinding the monograins on stoichiometry deviations, the Cu/Zn disorder as well as intrinsic point defects and optoelectronic properties of CZTSSe monograins. Moreover, an easy methodology based on Raman scattering spectroscopy is proposed for the assessment of Cu/Zn disorder in the CZTSSe compounds.
14 SOLAR ENERGY↗
Controlling the Fluctuating Tip-Enhanced Raman Spectra of Chloramben on Silver Nanocubes
Tip-enhanced Raman (TER) scattering from molecules residing at plasmonic junctions can be used to detect, identify, and image single molecules. This is most evident for flat molecules interrogated under extreme conditions of temperatures and pressure. It is also the case for (bio)molecular systems that feature preferred orientations/conformations under ambient laboratory conditions. More complex molecules that can adopt multiple conformations and/or that feature different protonation and/or charge states give rise to complex TER spectra. Here we illustrate how the latter can be controlled in the case of chloramben molecules coated onto plasmonic silver nanocubes. We show that characteristic molecular Raman spectra cannot be obtained when tunneling plasmons are operative, i.e., when the tip is in direct contact with the chemically functionalized plasmonic nanoparticles. We rationalize these observations and propose an approach to less invasive, and hence, more analytical TER spectral imaging.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Linker Contribution toward Stability of Metal–Organic Frameworks under Ionizing Radiation
Here, the effects of radiation on a series of UiO derivative metal–organic frameworks (MOFs) that contain the same zirconium hexamer node and similar organic linkers, UiO-66, UiO-66–NH 2 , UiO-66–OH, and NU-403, were examined using γ-rays and 5 MeV He ions. UiO-66, UiO-66–NH2, and UiO-66–OH contain aromatic linkers and are significantly more stable to radiation than NU-403. Of these, UiO-66 is the most radiation resistant, displaying crystalline features up to 47 MGy of He-ion irradiation. MOFs containing aromatic linkers functionalized by electron-donating groups, UiO-66–NH 2 and UiO-66–OH, retained crystalline features up to 19 MGy. NU-403 contains aliphatic rings and is the least radiation-resistant MOF studied here. NU-403 exhibits small changes in infrared spectra upon 3 MGy of γ-irradiation and significant damage upon 10 MGy of He-ion irradiation. Diffraction data revealed radiation-induced defect formation. Structural locations of radiation-induced breakdown were interrogated experimentally and via density functional theory. The results indicated changes in the carboxylate (-OCO) of the linker and μ 3 -OH vibrational modes, suggesting that introduction of an aliphatic linker into the MOF renders the connection between the linker and metal node most susceptible to radiation damage. This study reveals that the choice of the linker is crucial in designing a radiation-resistant MOF.
36 MATERIALS SCIENCE↗
Computationally Guided Investigation of the Optical Spectra of Pure β-UO 3
Single-phase β-UO 3 is synthesized by flash heating UO 2 (NO 3 )·6H 2 O in air to 450 °C and annealing for 60 h under the same conditions. For the first time, we report the Raman spectra of pure β-UO 3 . To facilitate the assignment of Raman and infrared vibrational modes, we use density functional theory with density functional perturbation theory. By employing a novel analysis scheme that includes the mode frequencies as well as a quantitative analysis of the mode eigenvectors, we assign the observed spectral features to individual chemical modes. In particular, the density functional theory optimized structure, observed Raman spectrum, and eigenvector analysis suggest the presence of four crystallographically distinct uranyl ions, one more than has previously been suggested.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗