Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process variable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Stochastic Dynamic Analysis for Power Systems Under Uncertain Variability

This paper proposes a novel method to analyze impacts of uncertain variability on power system dynamics. There is considerable interest in integrating intermittent renewable energy and plug-in electric vehicles into power systems. Therefore, power systems are in an environment with increasing uncertain variability. In this paper, the uncertain variability is described as a continuous-time stochastic process, and thus, the power system under uncertain variability is modeled by stochastic differential equations. To quantify impacts of uncertain variability on power system dynamics, an intra-region probability index is presented. Based on the stochastic averaging method, an analytical method is proposed to calculate the intra-region probability. Compared to Monte Carlo simulation, the proposed method is many orders of magnitude faster without sacrificing the result accuracy. As a result, several insights are given to improve the power system dynamics under uncertain variability.

24 POWER TRANSMISSION AND DISTRIBUTION↗

The sensitivity of carbon exchanges in Great Plains grasslands to precipitation variability

Abstract In the Great Plains, grassland carbon dynamics differ across broad gradients of precipitation and temperature, yet finer‐scale variation in these variables may also affect grassland processes. Despite the importance of grasslands, there is little information on how fine‐scale relationships compare between them regionally. We compared grassland C exchanges, energy partitioning and precipitation variability in eight sites in the eastern and western Great Plains using eddy covariance and meteorological data. During our study, both eastern and western grasslands varied between an average net carbon sink and a net source. Eastern grasslands had a moderate vapor pressure deficit (VPD = 0.95 kPa) and high growing season gross primary productivity (GPP = 1010 ± 218 g C m −2 yr −1 ). Western grasslands had a growing season with higher VPD (1.43 kPa) and lower GPP (360 ± 127 g C m −2 yr −1 ). Western grasslands were sensitive to precipitation at daily timescales, whereas eastern grasslands were sensitive at monthly and seasonal timescales. Our results support the expectation that C exchanges in these grasslands differ as a result of varying precipitation regimes. Because eastern grasslands are less influenced by short‐term variability in rainfall than western grasslands, the effects of precipitation change are likely to be more predictable in eastern grasslands because the timescales of variability that must be resolved are relatively longer. We postulate increasing regional heterogeneity in grassland C exchanges in the Great Plains in coming decades.

Petrie, M. D.↗

Simplifying NASA Earth Science Data and Information Access Through Natural Language Processing Based Data Analysis and Visualization

NASA Earth science data collected from satellites, model assimilation, airborne missions, and field campaigns, are large, complex and evolving. Such characteristics pose great challenges for end users (e.g., Earth science and applied science users, students, citizen scientists), particularly for those who are unfamiliar with NASA's EOSDIS and thus unable to access and utilize datasets effectively. For example, a novice user may simply ask: what is the total rainfall for a flooding event in my county yesterday? For an experienced user (e.g., algorithm developer), a question can be: how did my rainfall product perform, compared to ground observations, during a flooding event? Nonetheless, with rapid information technology development such as natural language processing, it is possible to develop simplified Web interfaces and back-end processing components to handle such questions and deliver answers in terms of text, data, or graphic results directly to users.In this presentation, we describe the main challenges for end users with different levels of expertise in accessing and utilizing NASA Earth science data. Surveys reveal that most non-professional users normally do not want to download and handle raw data as well as conduct heavy-duty data processing tasks. Often they just want some simple graphics or data for various purposes. To them, simple and intuitive user interfaces are sufficient because complicated ones can be difficult and time-consuming to learn. Professionals also want such interfaces to answer many questions from datasets. One solution is to develop a natural language based search box like Google and the search results can be text, data, graphics and more. Now the challenge is, with natural language processing, can we design a system to process a scientific question typed in by a user? In this presentation, we describe our plan for such a prototype. The workflow is: 1) extract needed information (e.g., variables, spatial and temporal information, processing methods, etc.) from the input, 2) process the data in the backend, and 3) deliver the results (data or graphics) to the user.

Liu, Zhong↗

An alternative formulation of the global sensitivity equations

To optimize the performance of any system, the sensitivity derivatives of the system's output variables with respect to its input variables must be readily available. It is also desirable that these derivatives be inexpensive to calculate as the optimization process requires many evaluations of the output variables and their derivatives. Optimization methods that have been developed for use in automated structural design programs may not be extended for use in integrated multidisciplinary design programs until adequate means of calculating accurate sensitivity derivatives of complex, internally coupled systems have been developed. Until the development of the Global Sensitivity Equations (GSE), the only method of determining the sensitivity derivatives of coupled systems has been by using finite differences. Analytical or semi-analytical derivatives do not exist as there is no analytical solution to the coupled problem. Also, difficulties arise because the finite difference method is expensive as the system has to iterate to a converged solution for each incremental input variable. The method may not be accurate, and the choice of the input variable increment may cause the difference in the output variable to be insignificant compared to computer numerical error if the choice is too small, or the process may not predict the true value of the output variable if the increment is too large. The GSE allow the system's sensitivity derivatives to be calculated as functions of the component subsystem's (local) sensitivity derivatives. These local sensitivity derivatives are calculated from specifically decoupled subsystems, whereas the GSE account for total system coupling. Since the subsystems are decoupled, it may be possible for the local derivatives to be calculated by analytical or semi-analytical methods, which generally reduce cost and improve accuracy. Several academic problems have been solved using GSE and have demonstrated encouraging results.

James, Benjamin B.↗

A First Approach to Global Runoff Simulation using Satellite Rainfall Estimation

Many hydrological models have been introduced in the hydrological literature to predict runoff but few of these have become common planning or decision-making tools, either because the data requirements are substantial or because the modeling processes are too complicated for operational application. On the other hand, progress in regional or global rainfall-runoff simulation has been constrained by the difficulty of measuring spatiotemporal variability of the primary causative factor, i.e. rainfall fluxes, continuously over space and time. Building on progress in remote sensing technology, researchers have improved the accuracy, coverage, and resolution of rainfall estimates by combining imagery from infrared, passive microwave, and space-borne radar sensors. Motivated by the recent increasing availability of global remote sensing data for estimating precipitation and describing land surface characteristics, this note reports a ballpark assessment of quasi-global runoff computed by incorporating satellite rainfall data and other remote sensing products in a relatively simple rainfall-runoff simulation approach: the Natural Resources Conservation Service (NRCS) runoff Curve Number (CN) method. Using an Antecedent Precipitation Index (API) as a proxy of antecedent moisture conditions, this note estimates time-varying NRCS-CN values determined by the 5-day normalized API. Driven by multi-year (1998-2006) Tropical Rainfall Measuring Mission (TRMM) Multi-satellite Precipitation Analysis, quasi-global runoff was retrospectively simulated with the NRCS-CN method and compared to Global Runoff Data Centre data at global and catchment scales. Results demonstrated the potential for using this simple method when diagnosing runoff values from satellite rainfall for the globe and for medium to large river basins. This work was done with the simple NRCS-CN method as a first-cut approach to understanding the challenges that lie ahead in advancing the satellite-based inference of global runoff. We expect that the successes and limitations revealed in this study will lay the basis for applying more advanced methods to capture the dynamic variability of the global hydrologic process for global runoff monlto~ngin real time. The essential ingredient in this work is the use of global satellite-based rainfall estimation.

Hong, Yang↗

BETO 2021 Peer Review - FCIC Task 5 - Preprocessing

In the study of feedstock variability, this presentation specifically looks at preprocessing processes that will created well-defined and homogenous feedstock from variable biomass resources, in the quest to produce homogeneous intermediates that will be converted into market-ready products. The objective of this stage of the project is to develop science-based design and operation principles informed by TEA/LCA that result in predictable, reliable, and scalable performance of preprocessing unit operations (comminution, fractionation, deconstruction, and real-time imaging).

biomass↗

Leveraging the signature of heterotrophic respiration on atmospheric CO 2 for model benchmarking

Spatial and temporal variations in atmospheric carbon dioxide (CO 2 ) reflect large-scale net carbon exchange between the atmosphere and terrestrial ecosystems. Soil heterotrophic respiration (HR) is one of the component fluxes that drive this net exchange, but, given observational limitations, it is difficult to quantify this flux or to evaluate global-scale model simulations thereof. Here, we show that atmospheric CO 2 can provide a useful constraint on large-scale patterns of soil heterotrophic respiration. We analyze three soil model configurations (CASA-CNP, MIMICS, and CORPSE) that simulate HR fluxes within a biogeochemical test bed that provides each model with identical net primary productivity (NPP) and climate forcings. We subsequently quantify the effects of variation in simulated terrestrial carbon fluxes (NPP and HR from the three soil test-bed models) on atmospheric CO 2 distributions using a three-dimensional atmospheric tracer transport model. Our results show that atmospheric CO 2 observations can be used to identify deficiencies in model simulations of the seasonal cycle and interannual variability in HR relative to NPP. In particular, the two models that explicitly simulated microbial processes (MIMICS and CORPSE) were more variable than observations at interannual timescales and showed a stronger-than-observed temperature sensitivity. Our results prompt future research directions to use atmospheric CO 2 , in combination with additional constraints on terrestrial productivity or soil carbon stocks, for evaluating HR fluxes.

54 ENVIRONMENTAL SCIENCES↗

Forest Environments

The application of remote sensing measurement techniques to scientific questions involving forests is a necessity because of the extent of forests, their variability, and the need to measure their interaction with environmental processes. The synoptic view given by remote sensing data of the extent, variability, and relation to environmental processes involving energy balances, disposition of water, and tree growth in relation to elemental storage of carbon, nitrogen and other essential elements is essential to understanding the forest in a scientific way. The ability to make comparisons in these properties at various intervals allows the determination of process functions and rates where the forest affects environmental properties. The ultimate objective in using these data is to define the extent of the forest and wildland resource, to determine the changes that are occurring in the resource due to utilization by man under conditions of changing market and population demands, and to evaluate the correlated changes occurring in various environmental properties influenced by forest vegetation on a local as well as global scale.

Zinke, P.↗

Quantitative-qualitative assessments of environmental causal networks to support the DPSIR framework in the decision-making process

Highlights: • DSPIR framework is extended for supporting the decision-making process. • Environmental causal networks are used instead of unidirectional causalities. • Quantitative and qualitative data are combined to improve environmental assessments. • Decision-makers can choose management actions to reach favorable future scenarios. - Abstract: The DPSIR framework helps to identify and situate stressors, drivers and pressure variables within a dynamic environmental process composed of cause-effect relations. However, an important aspect related to its structural deficiency implies the use of unidirectional causalities between variables. In this work, we extend the capacities of the DPSIR framework by addressing three important points. Firstly, causal networks are built instead of unidirectional causalities, the former based on paths represented by sequences of cause-effect relations between involved variables. These paths are derived from the population growth as a driving force variable, along with CO{sub 2} emissions, waste, water and loss of vegetation cover as pressure variables. Trends of these paths are combined to determine and quantitatively assess a global environmental state trend whose impacts on the environment require corrective management actions as a response. Secondly, quantitative assessments of environmental trends are transformed into fuzzy-qualitative data to facilitate their interpretation. Thirdly, a method based on weighted environmental management actions is presented to decision-makers who aspire to change current path trends in order to approach desirable scenarios similar to those put forth by the OECD outlook towards 2030. The results obtained applying this framework to the State of Morelos, México, show that it can be a useful support tool in the selection and monitoring of management actions capable of reaching favorable environmental trends.

54 ENVIRONMENTAL SCIENCES↗

Use of Raman Spectroscopy and Delta Volume Growth from Void Collapse to Assess Overwrap Stress Gradients Compromising the Reliability of Large Kevlar/Epoxy COPVs

Composite Overwrapped Pressure Vessels (COPVs) are frequently used for storing pressurized gases aboard spacecraft and aircraft when weight saving is desirable compared to all-metal versions. Failure mechanisms in fibrous COPVs and variability in lifetime can be very different from their metallic counterparts; in the former, catastrophic stress-rupture can occur with virtually no warning, whereas in latter, a leak before burst design philosophy can be implemented. Qualification and certification typically requires only one burst test on a production sample (possibly after several pressure cycles) and the vessel need only meet a design burst strength (the maximum operating pressure divided by a knockdown factor). Typically there is no requirement to assess variability in burst strength or lifetime, much less determine production and materials processing parameters important to control of such variability. Characterizing such variability and its source is crucial to models for calculating required reliability over a given lifetime (e.g. R = 0.9999 for 15 years). In this paper we present a case study of how lack of control of certain process parameters in COPV manufacturing can result in variations among vessels and between production runs that can greatly increase uncertainty and reduce reliability. The vessels considered are 40-inch ( NASA Glenn Research center, Cleveland, OH, 44135 29,500 in3 ) spherical COPVs with a 0.74 in. thick Kevlar49/epoxy overwrap and with a titanium liner of which 34 were originally produced. Two burst tests were eventually performed that unexpectedly differed by almost 5%, and were 10% lower than anticipated from burst tests on 26-inch sister vessels similar in every detail. A major observation from measurements made during proof testing (autofrettage) of the 40-inch vessels was that permanent volume growth from liner yielding varied by a factor of more than two (150 in3 to 360 in3 ), which suggests large differences in the residual stress gradient through their overwraps. This resulted in large uncertainty in true fiber stress ratio (fiber stress at operating pressure divided by fiber stress at burst) which governs lifetime. The vessels were originally designed with tight safety margins, so it became crucial to develop a non-destructive evaluation (NDE) technique to directly measure the overwrap residual stress state of each vessel, and to identify those vessels at highest risk of having poor reliability. This paper describes a Raman Spectroscopy technique for measuring certain patterns of fluctuation in fiber elastic strains over the outside vessel surface (where all but one wrap is exposed at certain locations) that are shown to directly correlate to increased fiber stress ratios and reduced reliability.

Kezirian, Michael T.↗

Water isotopes, climate variability, and the hydrological cycle: recent advances and new frontiers

Abstract The hydrologic cycle is a fundamental component of the climate system with critical societal and ecological relevance. Yet gaps persist in our understanding of water fluxes and their response to increased greenhouse gas forcing. The stable isotope ratios of oxygen and hydrogen in water provide a unique opportunity to evaluate hydrological processes and investigate their role in the variability of the climate system and its sensitivity to change. Water isotopes also form the basis of many paleoclimate proxies in a variety of archives, including ice cores, lake and marine sediments, corals, and speleothems. These records hold most of the available information about past hydrologic variability prior to instrumental observations. Water isotopes thus provide a ‘common currency’ that links paleoclimate archives to modern observations, allowing us to evaluate hydrologic processes and their effects on climate variability on a wide range of time and length scales. Building on previous literature summarizing advancements in water isotopic measurements and modeling and describe water isotopic applications for understanding hydrological processes, this topical review reflects on new insights about climate variability from isotopic studies. We highlight new work and opportunities to enhance our understanding and predictive skill and offer a set of recommendations to advance observational and model-based tools for climate research. Finally, we highlight opportunities to better constrain climate sensitivity and identify anthropogenically-driven hydrologic changes within the inherently noisy background of natural climate variability.

Dee, Sylvia (ORCID:000000022140785X)↗

Explosive Byproduct Gas Transport Through Sorptive Geomedia

Current underground nuclear explosion (UNE) detection strategies rely heavily on atmospheric noble gas sampling of radioxenon. However, discriminating nuclear weapons testing programs from civilian sources is difficult due to highly variable atmospheric radioxenon backgrounds and processes affecting subsurface transport of parent radionuclides. Here, we aim to study the transport of gases produced by subsurface explosions as novel stable signatures for underground nuclear explosion (UNE) monitoring. These gases may be produced in large quantities with distinct molecular ratios, which will be impacted by subsurface transport processes. To demonstrate how ratios of gases produced by explosions can change during transport in geomaterials, we conducted laboratory benchtop experiments on the transport of carbon dioxide (CO 2 ) and hydrogen (H 2 ) gases through variably saturated zeolitic tuff, which is abundant at the historic US testing site. We observed that zeolitic tuff sorbs substantial quantities of CO 2 while allowing H 2 to transport more freely, leading to changes in the molecular ratios of the two gases along the transport pathway. Gas uptake in the dry zeolitic tuff core was 72.3% for CO 2 , compared with 53.4% for xenon and 7.6% for H 2 . The presence of 20% water saturation disrupted the CO 2 sorption process, though to a lesser extent than observed for noble gases, with a 36.7% drop in xenon sorption compared with a 21.9% drop for CO 2 . These results represent the first observations of zeolite sorption altering explosive gas ratios during transport through geomedia relevant to nuclear proliferation monitoring.

54 ENVIRONMENTAL SCIENCES↗

LONG-TERM VARIABILITY OF RADIO-BRIGHT BL LACERTAE OBJECTS

Radio-bright BL Lacertae objects (BLOs) are typically very variable and exhibit prominent flaring. We use a sample of 24 BLOs, regularly monitored at Metsaehovi Radio Observatory, to get a clear idea of their flaring behavior in the radio domain and to find possible commonalities in their variability patterns. Our goal was to compare the results given by computational timescales and the observed variability parameters determined directly from the flux curves. Also, we wanted to find out if the BLO flares adhere to the generalized shock model, which gives a schematic explanation for the physical process giving rise to the variability. We use long-term monitoring data from 4.8, 8, 14.5, 22, 37, 90, and 230 GHz, obtained mainly from the University of Michigan and Metsaehovi Radio Observatories. The structure function, discrete correlation function, and Lomb-Scargle periodogram timescales, calculated in a previous study, are analyzed in more detail. Also, we determine flare durations, rise and decay times, and absolute and relative peak fluxes from the monitoring data. We find that radio-bright BLOs demonstrate a wide range of variability behavior, and few common denominators can be found. BLOs include sources with fast and strong variability, such as OJ 287, PKS 1749+096, and BL Lac, but also sources with more rolling fluctuations such as PKS 0735+178. The most extreme flares can last for up to 13 years or have peak fluxes of approximately 12 Jy in the observer's frame. When the Doppler boosting effect is taken into account, the peak flux of a flare does not depend on the duration of the flare. A rough analysis of the time lags and peak flux evolution indicates that, typically, BLO flares in the mm-cm wavelengths are high peaking, i.e., are in the adiabatic stage. Thus, the results concur with the generalized shock model, which assigns shocks traveling in the jet as the main cause for active galactic nucleus variability. Comparing the computational timescales and the parameters obtained from the flux curve analysis (i.e., rise and decay times and intervals of the flares) reveals that they do have a significant correlation, albeit with large scatter.

79 ASTRONOMY AND ASTROPHYSICS↗

IMPACT OF ALUMINATE IONS ON THE PROPERTIES OF SALTSTONE GROUT MIXES

It is important to identify and control the operational and compositional variables that impact the important processing and performance properties of Saltstone grout mixes. The grout that is produced at the Saltstone Production Facility (SPF) is referred to as Saltstone and is a waste form that immobilizes low concentrations of radionuclides as well as certain toxic metals. The Saltstone will be disposed of in vaults at Savannah River Site (SRS). An effort referred to as the Saltstone Variability Study has been initiated to achieve this goal. The protocols developed in this variability study are also ideally suited as a tool to assess the impact of proposed changes to the processing flow sheet for Liquid Waste Operations at SRS. One such proposal that is currently under consideration is to introduce a leaching step in the treatment of the High Level Waste (HLW) sludge to remove aluminum prior to vitrification at the Defense Waste Processing Facility (DWPF). This leachate would significantly increase the soluble aluminate concentration in the salt feed that will be processed at the SPF. Consequently, an initial study of the impact of increased aluminate concentration on the Saltstone grout properties was performed. Prior work by Lukens (1) showed that aluminate in the salt solutions increases the amount of heat generation.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Development of a Computer-based Benchmarking and Analytical Tool: Benchmarking and Energy & Water Savings Tool in Dairy Plants (BEST-Dairy) (Final Report)

The overall goal of the project is to develop a computer-based benchmarking and energy and water savings tool (BEST-Dairy) for use in the California dairy industry - including four dairy processes - cheese, fluid milk, butter, and milk powder. BEST-Dairy tool developed in this project provides three options for the user to benchmark each of the dairy product included in the tool, with each option differentiated based on specific detail level of process or plant, i.e., 1) plant level; 2) process-group level, and 3) process-step level. For each detail level, the tool accounts for differences in production and other variables affecting energy use in dairy processes. The dairy products include cheese, fluid milk, butter, milk powder, etc. The BEST-Dairy tool can be applied to a wide range of dairy facilities to provide energy and water savings estimates, which are based upon the comparisons with the best available reference cases that were established through reviewing information from international and national samples. We have performed and completed alpha- and beta-testing (field testing) of the BEST-Dairy tool, through which feedback from voluntary users in the U.S. dairy industry was gathered to validate and improve the tool's functionality. BEST-Dairy v1.2 was formally published in May 2011, and has been made available for free downloads from the internet (i.e., http://best-dairy.lbl.gov). A user's manual has been developed and published as the companion documentation for use with the BEST-Dairy tool. In addition, we also carried out technology transfer activities by engaging the dairy industry in the process of tool development and testing, including field testing, technical presentations, and technical assistance throughout the project. To date, users from more than ten countries in addition to those in the U.S. have downloaded the BEST-Dairy from the LBNL website. It is expected that the use of BEST-Dairy tool will advance understanding of energy and water usage in individual dairy plants, augment benchmarking activities in the market places, and facilitate implementation of efficiency measures and strategies to save energy and water usage in the dairy industry. Industrial adoption of this emerging tool and technology in the market is expected to benefit dairy plants, which are important customers of California utilities. Further demonstration of this benchmarking tool is recommended, for facilitating its commercialization and expansion in functions of the tool. Wider use of this BEST-Dairy tool and its continuous expansion (in functionality) will help to reduce the actual consumption of energy and water in the dairy industry sector. The outcomes comply very well with the goals set by the AB 1250 for PIER program.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

An Overview of ISS Human Research Data Sharing

This presentation is an attempt to clarify several aspects of the current procedures, tools, and challenges of human data sharing for ISS flight activities. There are several binary variables to consider with respect to human spaceflight data sharing: Medical vs. Research, Active Flight vs. Non-Flight, Tactical vs. Supplemental, Prospective vs. Retrospective. This presentation will address each of these variables and how they determine which processes and mechanisms are used both to document and facilitate human data sharing. Some of these variables will likely be so obvious that they induce eye rolls. Please bear with us. We're trying to make these slides fairly rudimentary for a wide, (eventually) international audience. Other distinctions are made if data originated from a NASA vs. IP crewmember. Those distinctions will be made apparent when needed.

Morshedi, Pasha↗

Modeling strength and failure variability due to porosity in additively manufactured metals

To model and quantify the variability in plasticity and failure of additively manufactured metals due to imperfections in their microstructure, we have developed uncertainty quantification methodology based on pseudo marginal likelihood and embedded variability techniques. We account for both the porosity resolvable in computed tomography scans of the initial material and the sub-threshold distribution of voids through a physically motivated model. Calibration of the model indicates that the sub-threshold population of defects dominates the yield and failure response. Finally, the technique also allows us to quantify the distribution of material parameters connected to microstructural variability created by the manufacturing process, and, thereby, make assessments of material quality and process control.

36 MATERIALS SCIENCE↗