Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Precise”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Crowded Field Galaxy Photometry: Precision Colors in the CLASH Clusters

We present a new method for photometering objects in galaxy clusters. We introduce a mode-filtering technique for removing spatially variable backgrounds, improving both detection and photometric accuracy (roughly halving the scatter in the red sequence compared to previous catalogs of the same clusters). This method is based on robustly determining the distribution of background pixel values and should provide comparable improvement in photometric analysis of any crowded fields. We produce new multiwavelength catalogs for the 25 CLASH cluster fields in all 16 bandpasses from the UV through the near-IR, as well as rest-frame magnitudes. A comparison with spectroscopic values from the literature finds a ∼30% decrease in the redshift deviation from previously released CLASH photometry. This improvement in redshift precision, in combination with a detection scheme designed to maximize purity, yields a substantial upgrade in cluster member identification over the previous CLASH galaxy catalog. We construct luminosity functions for each cluster, reliably reaching depths of at least 4.5 mag below M* in every case, and deeper still in several clusters. We measure M* , α, and their redshift evolution, assuming the cluster populations are coeval, and find little to no evolution of α,−0.9≲〈α〉≲−0.8, and M* values consistent with passive evolution. We present a catalog of galaxy photometry, photometric and spectroscopic redshifts, and rest-frame photometry for the full fields of view of all 25 CLASH clusters. Not only will our new photometric catalogs enable new studies of the properties of CLASH clusters, but mode-filtering techniques, such as those presented here, should greatly enhance the data quality of future photometric surveys of crowded fields.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

A More Precise Measurement of the Radius of PSR J0740+6620 Using Updated NICER Data

PSR J0740+6620 is the neutron star with the highest precisely determined mass, inferred from radio observations to be 2.08 ± 0.07 M ⊙ . Measurements of its radius therefore hold promise to constrain the properties of the cold, catalyzed, high-density matter in neutron star cores. Previously, Miller et al. and Riley et al. reported measurements of the radius of PSR J0740+6620 based on Neutron Star Interior Composition Explorer (NICER) observations accumulated through 2020 April 17, and an exploratory analysis utilizing NICER background estimates and a data set accumulated through 2021 December 28 was presented in Salmi et al. Here we report an updated radius measurement, derived by fitting models of X-ray emission from the neutron star surface to NICER data accumulated through 2022 April 21, totaling ~1.1 Ms additional exposure compared to the data set analyzed in Miller et al. and Riley et al., and to data from XMM-Newton observations. We find that the equatorial circumferential radius of PSR J0740+6620 is ${12.92}_{-1.13}^{+2.09}$ km (68% credibility), a fractional uncertainty ~83% the width of that reported in Miller et al., in line with statistical expectations given the additional data. If we were to require the radius to be less than 16 km, as was done in Salmi et al., then our 68% credible region would become $R={12.76}_{-1.02}^{+1.49}$ km, which is close to the headline result of Salmi et al. Our updated measurements, along with other laboratory and astrophysical constraints, imply a slightly softer equation of state than that inferred from our previous measurements.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Theory Techniques for Precision Physics -- Snowmass 2021 TF06 Topical Group Report

The wealth of experimental data collected at laboratory experiments suggests that there is some scale separation between the Standard Model (SM) and phenomena beyond the SM (BSM). New phenomena can manifest itself as small corrections to SM predictions, or as signals in processes where the SM predictions vanish or are exceedingly small. This makes precise calculations of the SM expectations essential, in order to maximize the sensitivity of current and forthcoming experiments to BSM physics. Here, this topical group report highlights some past and forthcoming theory developments critical for maximizing the sensitivity of the experimental program to understanding Nature at the shortest distances.

Boughezal, Radja↗
DOE OSTI2025

Neutrino Theory in the Precision Era

This document summarises discussions on future directions in theoretical neutrino physics, which are the outcome of a neutrino theory workshop held at CERN in February 2025. The starting point is the realisation that neutrino physics offers unique opportunities to address some of the most fundamental questions in physics. This motivates a vigorous experimental programme which the theory community fully supports. \textbf{A strong effort in theoretical neutrino physics is paramount to optimally take advantage of upcoming neutrino experiments and to explore the synergies with other areas of particle, astroparticle, and nuclear physics, as well as cosmology.} Progress on the theory side has the potential to significantly boost the physics reach of experiments, as well as go well beyond their original scope. Strong collaboration between theory and experiment is essential in the precision era. To foster such collaboration, \textbf{we propose to establish a CERN Neutrino Physics Centre.} Taking inspiration from the highly successful LHC Physics Center at Fermilab, the CERN Neutrino Physics Centre would be the European hub of the neutrino community, covering experimental and theoretical activities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2016

Network design for quantifying urban CO<sub>2</sub> emissions: assessing trade-offs between precision and network density

The majority of anthropogenic CO 2 emissions are attributable to urban areas. While the emissions from urban electricity generation often occur in locations remote from consumption, many of the other emissions occur within the city limits. Evaluating the effectiveness of strategies for controlling these emissions depends on our ability to observe urban CO 2 emissions and attribute them to specific activities. Cost-effective strategies for doing so have yet to be described. Here we characterize the ability of a prototype measurement network, modeled after the Berkeley Atmospheric CO 2 Observation Network (BEACO 2 N) in California's Bay Area, in combination with an inverse model based on the coupled Weather Research and Forecasting/Stochastic Time-Inverted Lagrangian Transport (WRF-STILT) to improve our understanding of urban emissions. The pseudo-measurement network includes 34 sites at roughly 2 km spacing covering an area of roughly 400 km 2 . The model uses an hourly 1 × 1 km 2 emission inventory and 1 × 1 km 2 meteorological calculations. We perform an ensemble of Bayesian atmospheric inversions to sample the combined effects of uncertainties of the pseudo-measurements and the model. We vary the estimates of the combined uncertainty of the pseudo-observations and model over a range of 20 to 0.005 ppm and vary the number of sites from 1 to 34. We use these inversions to develop statistical models that estimate the efficacy of the combined model–observing system in reducing uncertainty in CO 2 emissions. We examine uncertainty in estimated CO 2 fluxes on the urban scale, as well as for sources embedded within the city such as a line source (e.g., a highway) or a point source (e.g., emissions from the stacks of small industrial facilities). Using our inversion framework, we find that a dense network with moderate precision is the preferred setup for estimating area, line, and point sources from a combined uncertainty and cost perspective. The dense network considered here (modeled after the BEACO 2 N network with an assumed mismatch error of 1 ppm at an hourly temporal resolution) could estimate weekly CO 2 emissions from an urban region with less than 5 % error, given our characterization of the combined observation and model uncertainty.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Idealized simulation study of the relationship of disdrometer sampling statistics with the precision of precipitation rate measurement

Due to the discretized nature of rain, the measurement of a continuous precipitation rate by disdrometers is subject to statistical sampling errors. Here, Monte Carlo simulations are employed to obtain the precision of rain detection and rate as a function of disdrometer collection area and compared with World Meteorological Organization guidelines for a 1 min sample interval and 95 % probability. To meet these requirements, simulations suggest that measurements of light rain with rain rates R ≤ 0.50 mm h-1 require a collection area of at least 6 cm × 6 cm, and for R = 1 mm h -1 , the minimum collection area is 13 cm × 13 cm. For R = 0.01 mm h -1 , a collection area of 2 cm × 2 cm is sufficient to detect a single drop. Simulations are compared with field measurements using a new hotplate device, the Differential Emissivity Imaging Disdrometer. The field results suggest an even larger plate may be required to meet the stated accuracy, likely in part due to non-Poissonian hydrometeor clustering.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Characterization of a modified printed optical particle spectrometer for high-frequency and high-precision laboratory and field measurements

Abstract. The printed optical particle spectrometer (POPS) is a lightweight, low-cost instrument for measurements of aerosol number concentrations and size distributions. This work reports on modifications of the Handix Scientific commercial version of the POPS to facilitate its use in multi-instrument aerosol sampling systems. The flow system is modified by replacing the internal pump with a needle valve and a vacuum pump. The instrument is integrated into closed-flow systems by routing the sheath flow from filtered inlet air. A high-precision multichannel analyzer (MCA) card is added to sample the analog pulse signal. The MCA card is polled at 10 Hz frequency using an external data acquisition system and improves upon the count-rate limitation associated with the POPS internal data acquisition system. The times required to change the concentration between 90 % and 10 % and vice versa for a step change in concentration were measured to be 0.17 and 0.41 s at a flow rate of 5 cm3 s−1. This yields a sampling frequency of ∼ 1–2 Hz, below which the amplitude of measured fluctuations is captured with > 70 % efficiency. The modified POPS was integrated into the dual tandem differential mobility analyzer system to explore the coalescence of dimer particles. Results show that the pulse-height response increases upon dimer coalescence. The magnitude of the increase is broadly consistent with the change in light-scattering amplitude predicted by the T-matrix method. It is anticipated that this modified version of the POPS will extend the utilization of the technique for a range of field and laboratory applications.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Precision Small Scattering Angle Measurements of Proton–Proton and Proton–Nucleus Analyzing Powers at the RHIC Hydrogen Jet Polarimeter

At RHIC, the hydrogen jet target polarimeter (HJET) is used to measure proton beam polarization with accuracy $σ^{syst}_{P}$ / $P$ ≲ 0.5% by counting low energy (1–10 MeV) recoil protons in left-right symmetric detectors. The HJET performance also allowed us to precisely measure $pp$ and $pA$ (where $A$ is any ion stored at RHIC) analyzing powers in the CNI region. The results of the measurements are discussed.

43 PARTICLE ACCELERATORS↗
DOE OSTI2016

Dendritic trafficking faces physiologically critical speed-precision tradeoffs

Nervous system function requires intracellular transport of channels, receptors, mRNAs, and other cargo throughout complex neuronal morphologies. Local signals such as synaptic input can regulate cargo trafficking, motivating the leading conceptual model of neuron-wide transport, sometimes called the ‘sushi-belt model’. Current theories and experiments are based on this model, yet its predictions are not rigorously understood. We formalized the sushi belt model mathematically, and show that it can achieve arbitrarily complex spatial distributions of cargo in reconstructed morphologies. However, the model also predicts an unavoidable, morphology dependent tradeoff between speed, precision and metabolic efficiency of cargo transport. With experimental estimates of trafficking kinetics, the model predicts delays of many hours or days for modestly accurate and efficient cargo delivery throughout a dendritic tree. In conclusion, these findings challenge current understanding of the efficacy of nucleus-to-synapse trafficking and may explain the prevalence of local biosynthesis in neurons.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Spin Transparency Method for High Precision Experiments with Polarized Beams

The spin transparency method is a technique for efficient and flexible control of the beam polarizationin a synchrotron. It can be implemented in a figure-8 collider, a racetrack with two identical Siberiansnakes, as well as in a conventional ring at an energy corresponding to an integer spin resonance.Weak-field magnetic insertions called Spin Navigators provide polarization stabilization and manip-ulation including spin flipping. By compensating the spin effects of imperfections, a real synchrotroncan be turned into an effectively ideal ring from the spin dynamics point of view thus enabling funda-mental ultra-high precision experiments such as search for Electric Dipole Moment and Dark Matter.We discuss the possibility of applying the spin transparency mode at ultra-high energies

Filatov, Yury N.↗
DOE OSTI2021

Using millimeter-sized carbon-deuterium foils for high-precision deuterium-tritium neutron spectrum measurements in direct-drive inertial confinement fusion at the OMEGA laser facility

Millimeter-sized CD foils fielded close (order mm) to inertial confinement fusion (ICF) implosions have been proposed as a game-changer for improving energy resolution and allowing time-resolution in neutron spectrum measurements using the magnetic recoil technique. This paper presents results from initial experiments testing this concept for direct drive ICF at the OMEGA laser facility. While the foils are shown to produce reasonable signals, inferred spectral broadening is seen to be high (~5 keV) and signal levels low (by ~20%) compared to expectation. Before this type of foil is used for precision experiments, the foil mount must be improved, oxygen uptake in the foils better characterized, and impact of uncontrolled foil motion prior to detection investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2011

Baseline suppression problems for high precision measurements using optical beam profile monitors

The use of fluorescent screens (e.g. YAG screens) and Optical Transition Radiation (OTR) screens for beam profile monitors provides a simple and widely used way to obtain detailed two dimensional intensity maps. What makes this possible is the availability of relatively inexpensive CCD cameras. For high precision measurements many possible error contributions need to be considered that have to do with properties of the fluorescent screens and of the CCDs. Saturation effects, reflections within and outside the screen, non-linearities, radiation damage, etc are often mentioned. Here we concentrate on an error source less commonly described, namely erroneous baseline subtraction, which is particularly important when fitting projected images. We show computer simulations as well as measurement results having remarkable sensitivity of the fitted profile widths to even partial suppression of the profile baseline data, which often arises from large pixel-to-pixel variations at low intensity levels. Such inadvertent baseline data suppression is very easy to miss as it is usually not obvious when inspecting projected profiles. In this report we illustrate this effect and discuss possible algorithms to automate the detection of this problem as well as some possible corrective measures.

43 PARTICLE ACCELERATORS↗
DOE OSTI2011

Compact, Low-power and Precision Timing Photodetector Readout

Photodetector readout for next generation high event rate particle identification and single-photon detection requires a digitizer capable of integrated recording of dense arrays of sensor elements with high analog bandwidth (precision timing) and large record depth, in a cost-effective, compact and low-power way. Simply stated, one cannot do better than having a high-fidelity 'oscilloscope on a chip' for every sensor channel. A firs version of the Buffered Large Analog Bandwidth (BLAB1) ASIC has been designed based upon the lessons learned from the development of the Large Analog Bandwidth Recorder and Digitizer with Ordered Readout (LABRADOR) ASIC. While this LABRADOR ASIC has been very successful and forms the readout basis of a generation of new, large-scale radio neutrino detectors, its limited sampling depth is a major drawback. To address this shortcoming, a prototype intended for photodetector readout has been designed and fabricated with 64k deep sampling at multi-GSa/s operation. An evaluation system has been constructed for instrumentation of Time-Of-Propagation (TOP) and focusing DIRC prototypes and test results will be reported.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2011

Precision X-Band Linac Technologies for Nuclear Photonics Gamma-Ray Sources

Nuclear photonics is an emerging field of research requiring new tools, including high spectral brightness, tunable gamma-ray sources; high photon energy, ultrahigh-resolution crystal spectrometers; and novel detectors. This presentation focuses on the precision linac technology required for Compton scattering gamma-ray light sources, and on the optimization of the laser and electron beam pulse format to achieve unprecedented spectral brightness. Within this context, high-gradient X-band technology will be shown to offer optimal performance in a compact package, when used in conjunction with the appropriate pulse format, and photocathode illumination and interaction laser technologies. The nascent field of nuclear photonics is enabled by the recent maturation of new technologies, including high-gradient X-band electron acceleration, robust fiber laser systems, and hyper-dispersion CPA. Recent work has been performed at LLNL to demonstrate isotope-specific detection of shielded materials via NRF using a tunable, quasi-monochromatic Compton scattering gamma-ray source operating between 0.2 MeV and 0.9 MeV photon energy. This technique is called Fluorescence Imaging in the Nuclear Domain with Energetic Radiation (or FINDER). This work has, among other things, demonstrated the detection of {sup 7}Li shielded by Pb, utilizing gamma rays generated by a linac-driven, laser-based Compton scattering gamma-ray source developed at LLNL. Within this context, a new facility is currently under construction at LLNL, with the goal of generating tunable {gamma}-rays in the 0.5-2.5 MeV photon energy range, at a repetition rate of 120 Hz, and with a peak brightness in the 10{sup 20} photons/(s x mm{sup 2} x mrad{sup 2} x 0.1% bw).

42 ENGINEERING↗
DOE OSTI2011

Precise Measurement of the K - to Pi -E E- Decay

A sample of 7253 K{sup {+-}} {yields} {pi}{sup {+-}}e{sup +}e{sup -}({gamma}) decay candidates with 1.0% background contamination has been collected by the NA 48/2 experiment at the CERN SPS, which allowed a precise measurement of the decay properties. The branching ratio in the full kinematic range was measured to be BR = (3.11 {+-} 0.12) x 10{sup -7}, where the uncertainty includes also the model dependence. The shape of the form factor W(z), where z = (M{sub ee}/M{sub K}){sup 2}, was parameterized according to several models, and, in particular, the slope {delta} of the linear form factor W(z) = W{sub 0}(1 + {delta}z) was determined to be {delta} = 2.32 {+-} 0.18. A possible CP violating asymmetry of K{sup +} and K{sup -} decay widths was investigated, and a conservative upper limit of 2.1 x 10{sup -2} at 90% CL was established.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗