Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Reactor for producing large particles of materials from gases

A method and apparatus is disclosed for producing large particles of material from gas, or gases, containing the material (e.g., silicon from silane) in a free-space reactor comprised of a tube (20) and controlled furnace (25). A hot gas is introduced in the center of the reactant gas through a nozzle (23) to heat a quantity of the reactant gas, or gases, to produce a controlled concentration of seed particles (24) which are entrained in the flow of reactant gas, or gases. The temperature profile (FIG. 4) of the furnace is controlled for such a slow, controlled rate of reaction that virtually all of the material released condenses on seed particles and new particles are not nucleated in the furnace. A separate reactor comprised of a tube (33) and furnace (30) may be used to form a seed aerosol which, after passing through a cooling section (34) is introduced in the main reactor tube (34) which includes a mixer (36) to mix the seed aerosol in a controlled concentration with the reactant gas or gases.

Flagan, Richard C.↗

Measurements of the Flowfield Interaction Between Tandem Cylinders

This paper presents the most recent measurements from an ongoing investigation of the unsteady wake interference between a pair of circular cylinders in tandem. The purpose of this investigation is to help build an in-depth experimental database for this canonical flow configuration that embodies the effects of component interaction in landing gear noise. This new set of measurements augments the previous database at the primary Reynolds number (based on tunnel speed and cylinder diameter) of 1.66 105 in four important respects. First, better circumferential resolution of surface pressure fluctuations is obtained via cylinder "clocking". Second, higher resolution particle image velocimetry measurements of the shear layer separating from the cylinders are achieved. Third, the effects of simultaneous boundary layer trips along both the front and rear cylinders, versus front cylinder alone in the previous measurements, are studied. Lastly, on-surface and off-surface characteristics of unsteady flow near the "critical" cylinder spacing, wherein the flow switches intermittently between two states that are characteristic of lower and higher spacings, are examined. This critical spacing occurs in the middle of a relatively sudden change in the drag of either cylinder and is characterized by a loud intermittent noise and a flow behavior that randomly transitions between shear layer attachment to the rear cylinder and constant shedding and rollup in front of it. Analysis of this bistable flow state reveals much larger spanwise correlation lengths of surface pressure fluctuations than those at larger and smaller values of the cylinder spacing.

Neuhart, Dan H.↗

Modifying Silicates for Better Dispersion in Nanocomposites

An improved chemical modification has been developed to enhance the dispersion of layered silicate particles in the formulation of a polymer/silicate nanocomposite material. The modification involves, among other things, the co-exchange of an alkyl ammonium ion and a monoprotonated diamine with interlayer cations of the silicate. The net overall effects of the improved chemical modification are to improve processability of the nanocomposite and maximize the benefits of dispersing the silicate particles into the polymer. Some background discussion is necessary to give meaning to a description of this development. Polymer/silicate nanocomposites are also denoted polymer/clay composites because the silicate particles in them are typically derived from clay particles. Particles of clay comprise layers of silicate platelets separated by gaps called "galleries." The platelet thickness is 1 nm. The length varies from 30 nm to 1 m, depending on the silicate. In order to fully realize the benefits of polymer/silicate nanocomposites, it is necessary to ensure that the platelets become dispersed in the polymer matrices. Proper dispersion can impart physical and chemical properties that make nanocomposites attractive for a variety of applications. In order to achieve nanometer-level dispersion of a layered silicate into a polymer matrix, it is typically necessary to modify the interlayer silicate surfaces by attaching organic functional groups. This modification can be achieved easily by ion exchange between the interlayer metal cations found naturally in the silicate and protonated organic cations - typically protonated amines. Long-chain alkyl ammonium ions are commonly chosen as the ion-exchange materials because they effectively lower the surface energies of the silicates and ease the incorporation of organic monomers or polymers into the silicate galleries. This completes the background discussion. In the present improved modification of the interlayer silicate surfaces, the co-ion exchange strengthens the polymer/silicate interface and ensures irreversible separation of the silicate layers. One way in which it does this is to essentially tether one amine of each diamine molecule to a silicate surface, leaving the second amine free for reaction with monomers during the synthesis of a polymer. In addition, the incorporation of alkyl ammonium ions into the galleries at low concentration helps to keep low the melt viscosity of the oligomer formed during synthesis of the polymer and associated processing - a consideration that is particularly important in the case of a highly cross-linked, thermosetting polymer. Because of the chemical bonding between the surface-modifying amines and the monomers, even when the alkyl ammonium ions become degraded at high processing temperature, the silicate layers do not aggregate and, hence, nanometer-level dispersion is maintained.

Campbell, Sandi↗

The Evolution of Lidar Networks: A US Perspective

Atmospheric aerosols and clouds play an important role in climate by directly scattering and absorbing sunlight. Aerosol-cloud interactions modify the particle properties causing indirect effects, alter aerosol deposition and rainfall, and contribute substantially to the uncertainties in predicting climate effects. Aerosols also affect air quality and both constituents modulate boundary layer dynamics to a certain extent, in turn impacting aerosol transport and aerosol-cloud interactions. The spatiotemporal distribution of aerosol and cloud layers is thus important, and lidar remains the primary instrument for determining the vertical distribution of aerosols and thin clouds. Lidar still provides important information for opaque cloud layers by determining base heights. Combined lidar and radar data provide a comprehensive coverage of aerosol and cloud vertical distributions, and thus locations where and when they interact. Lidar data provide a means of constraining column aerosol loading observations (e.g. AOD) to vertical extents. In addition, lidar has proven effective at determining a proxy for boundary layer height by examining aerosol gradients and/or cloud base heights in lidar profiles. Polarized lidars provide additional information on particle shape, allowing estimates of cloud phase and separation of dust or smoke from sulfate and sea salt aerosols. Given the importance of lidar observations and a critical maturation in technology and retrieval techniques, several organizations began to build operational lidar networks around 2000. The European Aerosol Research Lidar Network (EARLINET) was started as a research focused network of advanced lidars across Europe. The Asian Dust Lidar Network (ADNET) was also developed as a regional network providing lidar profiles of dust and pollution across Eastern Asia. In the US, the NASA Micro Pulse Lidar Network (MPLNET) was created to provide global lidar profiling at key sites in the NASA Aerosol Robotic Network (AERONET). The Network for the Detection of Atmospheric Composition Change (NDACC) pre-dates these networks and many sites have lidar, but it is not strictly a lidar network and at the time focused less on the lower troposphere. Finally, there were already existing ceilometer networks operated by various meteorological agencies, but in particular here in the US the profile data has not been available. The ceilometer networks were used to provide only clouds base heights and estimates of PBL height. Thus, the distinguishing feature between lidar and ceilometer networks was historically the ability to actually provide profile information (in addition to differences in wavelength, and advanced retrievals such as the raman technique). As time progressed, each lidar network matured and developed more operational capabilities and data sets, coupled with viable data centers providing DAAC services and access to near-real-time (NRT) data. In 2008 under WMO guidance, the Global Atmospheric Watch (GAW) Aerosol Lidar Observation Network (GALION) was formed as a global network made up of the existing lidar networks. The goal was to share information, best practices, and develop frameworks and techniques for quality data. GALION grew to include several other regional lidar networks and this has led to a vast increase in quality lidar sites worldwide.

Welton, Ellsworth J.↗

Relating Lightning Flash Size and Energy to Tropical Cyclone Structure and Intensity Change

The number and location of lightning flashes within tropical cyclones (TCs) has proven to be a useful predictor of TC intensity change. Generally, a large number of lightning flashes located within the radius of maximum wind indicates a convective structure favorable for intensification. However, weakening TCs can also exhibit numerous lightning flashes, and rapid intensification can occur in the absence of inner-core lightning. It is thus difficult to interpret what the presence or absence of inner-core lightning might mean for a TC’s future evolution. The Geostationary Lightning Mapper (GLM) offers a new capability to observe not only the number and location of lightning flashes, but also the size and optical energy of those flashes. This presentation describes the application of these new metrics to further understand the relationship between lightning and TC structural and intensity evolution. Evidence is presented that flash size and optical energy reveal more about the convective and kinematic structures relevant to intensity change than an analysis of lightning flash count and location alone. We hypothesize that large, energetic lightning flashes are generated when the TC secondary circulation is strongest, an environment which favors increased generation of ice particles in the eyewall updraft and larger charge separation through outward advection of ice in the upper-level outflow. Conversely, smaller, lower-energy lightning flashes tend to occur in more localized turbulent updrafts, which can be forced by a variety of processes – some of which act to weaken the storm. These hypotheses are supported by numerical simulations of TC convection.

Patrick Duran↗

Air Classification of Forestry Residues for Fast Pyrolysis

Understanding critical biomass attributes through efficient fractionation is crucial for advancing sustainable pyrolysis for renewable energy and chemical production. This study investigates the intricate relationship between biomass preprocessing and pyrolysis product yields, employing the air classification technique for the treatment of loblolly pine residues with varying moisture content. A comprehensive exploration of the physicochemical properties of air-classified loblolly pine informs a sophisticated pyrolysis simulation model. Given the complex and multifaceted nature of biomass pyrolysis, operating across diverse temporal and spatial scales, a pyrolysis kinetics-based CFD–DEM simulation method is employed to predict product yields. Results showed that the elevated moisture content amplifies particle adhesiveness, necessitating augmented air velocities for effective separation, thereby influencing the efficiency of the separation process. While carbon and hydrogen contents exhibit relative stability across diverse moisture contents and blower frequencies, the oxygen content undergoes noticeable changes. For example, the oxygen contents were measured as 29.2 and 38.6 wt% in the light fraction of 30% moisture content sample at blower frequencies of 10 and 20 Hz, respectively. An intriguing finding emerges from pyrolysis simulation, indicating that a lower blower frequency in air classification moderately enhances bio-oil yield and significantly improves its quality, particularly in terms of water content. For instance, the water content in the bio-oil was about 1.5% and 10% in the heavy and light fractions, respectively from 10% moisture sample under 15 Hz blower frequency.

09 - BIOMASS FUELS↗

Status of the NGNP fuel experiment AGR-2 irradiated in the advanced test reactor

The United States Department of Energy's Next Generation Nuclear Plant (NGNP) Advanced Gas Reactor (AGR) Fuel Development and Qualification Program will be irradiating up to seven separate low enriched uranium (LEU) tri-isotopic (TRISO) particle fuel (in compact form) experiments in the Advanced Test Reactor (ATR) located at the Idaho National Laboratory (INL). These irradiations and fuel development are being accomplished to support development of the next generation reactors in the United States, and will be irradiated over the next several years to demonstrate and qualify new TRISO coated particle fuel for use in high temperature gas reactors. The goals of the irradiation experiments are to provide irradiation performance data to support fuel process development, to qualify fuel for normal operating conditions, to support development and validation of fuel performance and fission product transport models and codes, and to provide irradiated fuel and materials for post irradiation examination (PIE) and safety testing. The experiments, which will each consist of at least six separate capsules, will be irradiated in an inert sweep gas atmosphere with individual on-line temperature monitoring and control of each capsule. The sweep gas will also undergo on-line fission product monitoring to track performance of the fuel in each individual capsule during irradiation. The first experiment (designated AGR-1) started irradiation in December 2006 and was completed in November 2009. The second experiment (AGR-2), which utilized the same experiment design as well as control and monitoring systems as AGR-1, started irradiation in June 2010 and is currently scheduled to be completed in April 2013. The design of this experiment and sup

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Status of the NGNP Fuel Experiment AGR-2 Irradiated in the Advanced Test Reactor

The United States Department of Energy’s Next Generation Nuclear Plant (NGNP) Advanced Gas Reactor (AGR) Fuel Development and Qualification Program will be irradiating up to seven separate low enriched uranium (LEU) tri-isotopic (TRISO) particle fuel (in compact form) experiments in the Advanced Test Reactor (ATR) located at the Idaho National Laboratory (INL). These irradiations and fuel development are being accomplished to support development of the next generation reactors in the United States, and will be irradiated over the next several years to demonstrate and qualify new TRISO coated particle fuel for use in high temperature gas reactors. The goals of the irradiation experiments are to provide irradiation performance data to support fuel process development, to qualify fuel for normal operating conditions, to support development and validation of fuel performance and fission product transport models and codes, and to provide irradiated fuel and materials for post irradiation examination (PIE) and safety testing. The experiments, which will each consist of at least six separate capsules, will be irradiated in an inert sweep gas atmosphere with individual on-line temperature monitoring and control of each capsule. The sweep gas will also have on-line fission product monitoring on its effluent to track performance of the fuel in each individual capsule during irradiation. The first experiment (designated AGR-1) started irradiation in December 2006 and was completed in November 2009. The second experiment (AGR-2), which utilized the same experiment design as well as control and monitoring systems as AGR-1, started irradiation in June 2010 and is currently scheduled to be completed in April 2013. The design of this experiment and support systems will be briefly discussed, followed by the progress and status of the experiment to date.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Design and Status of the NGNP Fuel Experiment AGR-3/4 Irradiated in the Advanced Test Reactor

The United States Department of Energy’s Next Generation Nuclear Plant (NGNP) Advanced Gas Reactor (AGR) Fuel Development and Qualification Program will be irradiating up to seven separate low enriched uranium (LEU) tri-isotopic (TRISO) particle fuel (in compact form) experiments in the Advanced Test Reactor (ATR) located at the Idaho National Laboratory (INL). These irradiations and fuel development are being accomplished to support development of the next generation reactors in the United States, and will be irradiated over the next several years to demonstrate and qualify new TRISO coated particle fuel for use in high temperature gas reactors. The goals of the irradiation experiments are to provide irradiation performance data to support fuel process development, to qualify fuel for normal operating conditions, to support development and validation of fuel performance and fission product transport models and codes, and to provide irradiated fuel and materials for post irradiation examination (PIE) and safety testing. The experiments, which will each consist of at least six separate capsules, will be irradiated in an inert sweep gas atmosphere with individual on-line temperature monitoring and control of each capsule. The sweep gas will also have on-line fission product monitoring on its effluent to track performance of the fuel in each individual capsule during irradiation. The first experiment (designated AGR-1) started irradiation in December 2006 and was completed in November 2009. The second experiment (AGR-2) started irradiation in June 2010 and is currently scheduled to be completed in April 2013. The third and fourth experiments have been combined into a single experiment designated AGR-3/4, which started its irradiation in December 2011 and is currently scheduled to be completed in November 2013. Since the purpose of this experiment is to provide data on fission product migration and retention in the NGNP reactor, the design of this experiment is significantly different from the first two experiments, though the control and monitoring systems are very similar. The purpose and design of this experiment will be discussed followed by its progress and status to date.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The Next Generation Nuclear Plant/Advanced Gas Reactor Fuel Irradiation Experiments in the Advanced Test Reactor

The United States Department of Energy’s Next Generation Nuclear Plant (NGNP) Program will be irradiating eight separate low enriched uranium (LEU) tri-isotopic (TRISO) particle fuel (in compact form) experiments in the Advanced Test Reactor (ATR) located at the Idaho National Laboratory (INL). The ATR has a long history of irradiation testing in support of reactor development and the INL has been designated as the new United States Department of Energy’s lead laboratory for nuclear energy development. The ATR is one of the world’s premiere test reactors for performing long term, high flux, and/or large volume irradiation test programs. These irradiations and fuel development are being accomplished to support development of the next generation reactors in the United States, and will be irradiated over the next ten years to demonstrate and qualify new particle fuel for use in high temperature gas reactors. The goals of the irradiation experiments are to provide irradiation performance data to support fuel process development, to qualify fuel for normal operating conditions, to support development and validation of fuel performance and fission product transport models and codes, and to provide irradiated fuel and materials for post irradiation examination (PIE) and safety testing. The experiments, which will each consist of at least six separate capsules, will be irradiated in an inert sweep gas atmosphere with individual on-line temperature monitoring and control of each capsule. The sweep gas will also have on-line fission product monitoring on its effluent to track performance of the fuel in each individual capsule during irradiation. The first experiment (designated AGR-1) started irradiation in December 2006, and the second experiment (AGR-2) is currently in the design phase. The design of test trains, as well as the support systems and fission product monitoring system that will monitor and control the experiment during irradiation will be discussed. In addition, the purpose and differences between the two experiments will be compared and the irradiation results to date on the first experiment will be presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Completion of the first NGNP Advanced Gas Reactor Fuel Irradiation Experiment, AGR-1, in the Advanced Test Reactor

The United States Department of Energy’s Next Generation Nuclear Plant (NGNP) Advanced Gas Reactor (AGR) Fuel Development and Qualification Program will be irradiating up to seven separate low enriched uranium (LEU) tri-isotopic (TRISO) particle fuel (in compact form) experiments in the Advanced Test Reactor (ATR) located at the Idaho National Laboratory (INL). The ATR has a long history of irradiation testing in support of reactor development and the INL has been designated as the United States Department of Energy’s lead laboratory for nuclear energy development. The ATR is one of the world’s premiere test reactors for performing long term, high flux, and/or large volume irradiation test programs. These irradiations and fuel development are being accomplished to support development of the next generation reactors in the United States, and will be irradiated over the next several years to demonstrate and qualify new TRISO coated particle fuel for use in high temperature gas reactors. The goals of the irradiation experiments are to provide irradiation performance data to support fuel process development, to qualify fuel for normal operating conditions, to support development and validation of fuel performance and fission product transport models and codes, and to provide irradiated fuel and materials for post irradiation examination (PIE) and safety testing. The experiments, which will each consist of at least six separate capsules, will be irradiated in an inert sweep gas atmosphere with individual on-line temperature monitoring and control of each capsule. The sweep gas will also have on-line fission product monitoring on its effluent to track performance of the fuel in each individual capsule during irradiation. The first experiment (designated AGR-1) started irradiation in December 2006 and completed a very successful irradiation in early November 2009. The design of AGR-1 test train and support systems used to monitor and control the experiment during irradiation will be discussed and the results of the experiment will be presented. The second experiment (AGR-2) is currently being assembled, and the status as well as the new fuel and irradiation conditions for that experiment will also be discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Investigation of continuous carbothermal reduction of magnesia by magnesium vapor condensation onto a moving bed of solid particles

Magnesium metal production by carbothermic reduction (CTR) can reduce process emissions and energy requirements relative to silicothermic or electrolytic production, if high magnesium metal yields are achieved. A novel process was investigated where product magnesium gas condensed onto a moving bed of solid particles at high temperatures (≥300 °C) and in vacuum to minimize reversion and promote crystal growth. Using a half-system in which CTR product gases were artificially generated, magnesium continuously condensed onto steel, oxide, or carbide particles at yields >85% for P Mg = 0.5 kPa. Steel particles exhibited the greatest bed retention and ease of separation, so this medium was used for scale-up to a full-system in which MgO CTR in a fixed bed gasifier at 1400 °C–1550 °C produced Mg (g) and CO. The initial reduction resulted in high Mg yield (>80%), but yield decreased as the reaction proceeded. The accumulation of Mg (s) and reversion product in the condenser promoted further reversion. The process yield could likely be improved by using high surface area particles to promote heat and mass transfer, allowing for shorter solid and gas residence times in the condenser. A finite volume model on the reactor tube and pellet bed described the kinetics, heat transfer, and mass transfer phenomena in the reduction reactor. The model predicted that the center of the bed was >50 °C cooler than the furnace, and the product gas pressures were near equilibrium. A wide, directly heated reactor could overcome these heat and mass transfer limitations.

42 ENGINEERING↗

A generalized Ewald decomposition for screened Coulomb interactions

Medium-range interactions occur in a wide range of systems, including charged-particle systems with varying screening lengths. We generalize the Ewald method to charged systems described by interactions involving an arbitrary dielectric response function ϵ(𝐤). We provide an error estimate and optimize the generalization to find the break-even parameters that separate a neighbor list-only algorithm from the particle-particle particle-mesh algorithm. We examine the implications of different choices of the screening length for the computational cost of computing the dynamic structure factor. We then use our new method in molecular dynamics simulations to compute the dynamic structure factor for a model plasma system and examine the wave-dispersion properties of this system.

Dharuman, Gautham↗

Nonlinear accelerator lattices with one and two analytic invariants

Integrable systems appeared in physics long ago at the onset of classical dynamics with examples being Kepler's and other famous problems. Unfortunately, the majority of nonlinear problems turned out to be nonintegrable. In accelerator terms, any 2D nonlinear nonintegrable mapping produces chaotic motion and a complex network of stable and unstable resonances. Nevertheless, in the proximity of an integrable system the full volume of such a chaotic network is small. Thus, the integrable nonlinear motion in accelerators has the potential to introduce a large betatron tune spread to suppress instabilities and to mitigate the effects of space charge and magnetic field errors. To create such an accelerator lattice one has to find magnetic and electric field combinations leading to a stable integrable motion. This paper presents families of lattices with one invariant where bounded motion can be easily created in large volumes of the phase space. In addition, it presents 3 families of integrable nonlinear accelerator lattices, realizable with longitudinal-coordinate-dependent magnetic or electric fields with the stable nonlinear motion, which can be solved in terms of separable variables.

43 PARTICLE ACCELERATORS↗

Safe Replacement For Asbestos In Nickel/Hydrogen Cells

Polyethylene fibers and potassium titanate particles perform as well as asbestos. New material for separators of nickel-hydrogen electrochemical cells offers performance similar to that of asbestos separator material without adverse health effects. In one version, separator contains pure polyethylene fibers, and may or may not contain supplementary latices as bonding agents. In standard wet-laying papermaking process, fibers pressed into mat, then dried. Mat used as is or pressed further in hot calender stack to soften and fuse fibers at crossing points. Treatment reduces porosity and increases resistance of mat to passage of air bubbles under pressure. In alternative version, matrix of 20 to 40 percent polyethylene fibers and 60 to 80 percent potassium titanate particles formed on paper machine, then dried. It, too, can be treated by hot calendering.

Scott, William E.↗

KT Boundary Impact Debris from DSDP Site 577

The KT boundary at DSDP Site 577 (Shatsky Rise, western North Pacific) is in a calcareous nannofossil ooze. It is bioturbated so Ir and impact debris are smeared across less than 15 cm of core. An absence of sulfides and chalcophile enrichment and the presence of Mn-micronodules indicate that this boundary did not experience anoxic conditions typical of many other calcareous KT sites. Because of its shallow burial (109 m) ejecta is extremely well preserved and has been the subject of numerous studies. Three high-temperature minerals have been identified at this site. Clinopyroxene (cpx), found only at Site 577 may be precursor to diagenetic sanidine in some European sites. Magnesioferrite spinel has the highest Fe2O3/FeO of any locality and can have and trace inclusions of Ni-magnesiowustite, which is known at only one other site (Site 596). Other debris described includes shocked quartz grains less than 200 microns, hollow spherules possibly related to impact melt glasses found near Chicxulub, and irregular Ir-rich particles that may be derived directly from meteoritic materials. The latter may be related to the fossil meteorite found at Site 576, just 500 km to the east. A large-volume (approx. 10 cc) sample was taken to systematically characterize debris. The less than 60 microns fraction of the carbonate-free sediment contained 44 mg of impact debris. 2700 particles less than l00 microns were classified based on color, shape, and morphology. About 55% are generally light colored, composed mostly of clays, and typically lack magnesioferrite spinel. Less than half of these are quite spherical; many have irregular shapes, possibly from fragmentation. Hollow spherules with smooth shiny surfaces are only 2% of the total but many fragments in the 60 - 100 microns fraction suggest that they were more abundant and that some may have been quite large; 800 microns or more. Cpx-bearing spherules, easily identified by green crystals at the surface, constitute only 2.5% of the total. Three cpx spherules are dumbbells. The other 40% of the debris is a complex assemblage of dark-colored particles, most of which have magnesioferrite spinel. We have currently separated these into 6 groups based on color and morphology, but this hardly describes the diversity of this group. They range from smooth and spherical to rough and irregular in shape. Some have a planar cleavage, similar to some broken cosmic spherules. 220 particles were irradiated for trace element analysis, as groups and as individual particles. It appears that every spherule type as at least a few ng/g Ir. Several of the spinel-bearing particles have been identified with high Ir (200-1500 ng/g), Cr (2-5 mg/g), and Ni (2-10 mg/g), consistent with results. It is hoped that some of these will yield potential fragments of the KT bolide. Only five have been sectioned to date and they are characterized by high concentrations of spinel; two contained traces of magnesiowustite. This debris constitutes a complex assemblage of ejecta materials. The light-colored, spinel-free particles likely derive mainly from target materials. A significant fraction of these are probably alteration products of cpx-spherules. The dark-colored debris is more likely to have high siderophile concentrations, and thus a high extraterrestrial component. However, the majority don't. Most of the larger spinel-bearing spherules have modest Ir concentrations (5-30 ng/g).

Kyte, Frank T.↗

SNO+ Scintillator Purification and Assay

We describe the R and D on the scintillator purification and assay methods and technology for the SNO+ neutrino and double-beta decay experiment. The SNO+ experiment is a replacement of the SNO heavy water with liquid scintillator comprised of 2 g/L PPO in linear alkylbenzene (LAB). During filling the LAB will be transported underground by rail car and purified by multi-stage distillation and steam stripping at a flow rate of 19 LPM. While the detector is operational the scintillator can be recirculated at 150 LPM (full detector volume in 4 days) to provide repurification as necessary by either water extraction (for Ra, K, Bi) or by functional metal scavenger columns (for Pb, Ra, Bi, Ac, Th) followed by steam stripping to remove noble gases and oxygen (Rn, O{sub 2}, Kr, Ar). The metal scavenger columns also provide a method for scintillator assay for ex-situ measurement of the U and Th chain radioactivity. We have developed ''natural'' radioactive spikes of Pb and Ra in LAB and use these for purification testing. Lastly, we present the planned operating modes and purification strategies and the plant specifications and design.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

New Developments In Particle Image Velocimetry (PIV) For The Study Of Complex Plasmas

Particle Image Velocimetry (PIV) is a fluid measurement technique in which the average displacement of small groups of particles is made by comparing a pair of images that are separated in time by an interval {Delta}t. For over a decade, a several variations of the PIV technique, e.g., two-dimensional, stereoscopic, and tomographic PIV, have been used to characterize particle transport, instabilities, and the thermal properties of complex plasmas. This paper describes the basic principles involved in the PIV analysis technique and discusses potential future applications of PIV to the study of complex plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗