Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Parameter Estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Noncommuting observables in quantum detection and estimation theory

In quantum detection theory, the optimum detection operators must commute; admitting simultaneous approximate measurement of noncommuting observables cannot yield a lower Bayes cost. In addition, the lower bounds on mean square errors of parameter estimates, predicted by the quantum mechanical Cramer-Rao inequality, cannot be reduced by such means.

Helstrom, C. W.↗

Towards constraining cosmological parameters with SPT-3G observations of 25% of the sky

The South Pole Telescope (SPT), using its third-generation camera, SPT-3G, is conducting observations of the cosmic microwave background (CMB) in temperature and polarization across approximately 10 000 deg$^2$ of the sky at 95, 150, and 220 GHz. This comprehensive dataset should yield stringent constraints on cosmological parameters. In this work, we explore its potential to address the Hubble tension by forecasting constraints from temperature, polarization, and CMB lensing on early dark energy (EDE) and the variation in electron mass in spatially flat and curved universes. For this purpose, we investigate first whether analyzing the distinct SPT-3G observation fields independently, as opposed to as a single, unified region, results in a loss of information relevant to cosmological parameter estimation. We develop a realistic temperature and polarization likelihood pipeline capable of analyzing these fields in these two ways, and subsequently forecast constraints on cosmological parameters. Our findings indicate that any loss of constraining power from analyzing the fields separately is primarily concentrated at low multipoles ($\ell$ < 50) and the overall impact on the relative uncertainty on standard $Λ$ cold dark matter parameters is minimal (< 3%). Our forecasts suggest that SPT-3G data should improve by more than a factor of 90 and 190 the figure of merit of the EDE and the varying electron mass models, respectively, when combined with Planck data. The likelihood pipeline developed and used in this work is made publicly available online.

Vitrier, A. [Paris, Inst. Astrophys.]↗

The Mechanisms of Natural Variability and its Interaction with Anthropogenic Climate Change Final Report

The project had two main components. The first concerns estimating the climate sensitivity in the presence of forcing uncertainty and natural variability. Climate sensitivity is the increase in the average surface temperature for a given increase in greenhouse gases, for example a doubling of carbon dioxide. We have provided new, probabilistic estimates of climate sensitivity using a simple climate model an the observed warming in the 20th century, in conjunction with ideas in data assimilation and parameter estimation developed in the engineering community. The estimates combine the uncertainty in the anthropogenic aerosols with the uncertainty arising because of natural variability. The second component concerns how the atmospheric circulation itself might change with anthropogenic global warming. We have shown that GCMs robustly predict an increase in the length scale of eddies, and we have also explored the dynamical mechanisms whereby there might be a shift in the latitude of the jet stream associated with anthropogenic warming. Such shifts in the jet might cause large changes in regional climate, potentially larger than the globally-averaged signal itself. We have also shown that the tropopause robustly increases in height with global warming, and that the Hadley Cell expands, and that the expansion of the Hadley Cell is correlated with the polewards movement of the mid-latitude jet.

58 GEOSCIENCES↗

Estimated Probability of a Cervical Spine Injury During an ISS Mission

Introduction: The Integrated Medical Model (IMM) utilizes historical data, cohort data, and external simulations as input factors to provide estimates of crew health, resource utilization and mission outcomes. The Cervical Spine Injury Module (CSIM) is an external simulation designed to provide the IMM with parameter estimates for 1) a probability distribution function (PDF) of the incidence rate, 2) the mean incidence rate, and 3) the standard deviation associated with the mean resulting from injury/trauma of the neck. Methods: An injury mechanism based on an idealized low-velocity blunt impact to the superior posterior thorax of an ISS crewmember was used as the simulated mission environment. As a result of this impact, the cervical spine is inertially loaded from the mass of the head producing an extension-flexion motion deforming the soft tissues of the neck. A multibody biomechanical model was developed to estimate the kinematic and dynamic response of the head-neck system from a prescribed acceleration profile. Logistic regression was performed on a dataset containing AIS1 soft tissue neck injuries from rear-end automobile collisions with published Neck Injury Criterion values producing an injury transfer function (ITF). An injury event scenario (IES) was constructed such that crew 1 is moving through a primary or standard translation path transferring large volume equipment impacting stationary crew 2. The incidence rate for this IES was estimated from in-flight data and used to calculate the probability of occurrence. The uncertainty in the model input factors were estimated from representative datasets and expressed in terms of probability distributions. A Monte Carlo Method utilizing simple random sampling was employed to propagate both aleatory and epistemic uncertain factors. Scatterplots and partial correlation coefficients (PCC) were generated to determine input factor sensitivity. CSIM was developed in the SimMechanics/Simulink environment with a Monte Carlo wrapper (MATLAB) used to integrate the components of the module. Results: The probability of generating an AIS1 soft tissue neck injury from the extension/flexion motion induced by a low-velocity blunt impact to the superior posterior thorax was fitted with a lognormal PDF with mean 0.26409, standard deviation 0.11353, standard error of mean 0.00114, and 95% confidence interval [0.26186, 0.26631]. Combining the probability of an AIS1 injury with the probability of IES occurrence was fitted with a Johnson SI PDF with mean 0.02772, standard deviation 0.02012, standard error of mean 0.00020, and 95% confidence interval [0.02733, 0.02812]. The input factor sensitivity analysis in descending order was IES incidence rate, ITF regression coefficient 1, impactor initial velocity, ITF regression coefficient 2, and all others (equipment mass, crew 1 body mass, crew 2 body mass) insignificant. Verification and Validation (V&V): The IMM V&V, based upon NASA STD 7009, was implemented which included an assessment of the data sets used to build CSIM. The documentation maintained includes source code comments and a technical report. The software code and documentation is under Subversion configuration management. Kinematic validation was performed by comparing the biomechanical model output to established corridors.

Brooker, John E.↗

Predicting Patterns of Solar Energy Buildout to Identify Opportunities for Biodiversity Conservation

The construction of solar energy facilities can have positive or negative impacts on biodiversity depending on siting and associated land use transitions. We identified drivers of solar siting and quantified patterns of buildout in states surrounding the Chesapeake Bay watershed – a biodiversity hotspot with numerous ecosystem services. Using a convolutional neural network, we mapped the footprints of ground-mounted solar arrays present in satellite imagery annually from 2017 to 2021 in Delaware, Maryland, Pennsylvania, New York, Virginia, and West Virginia. As of 2021, we identified 958 solar arrays covering 52.3 km2 built primarily on previously cultivated land, while avoiding natural landcover. We fit a binomial-Weibull model to these solar timeseries data in a hierarchical, Bayesian framework to quantify the relationship between geospatial covariates and rate of solar development. Solar array construction rate increased in cultivated areas, areas of lower agricultural suitability, lower slope, lower forest cover, lower biodiversity protection, and greater distances from roads. We also estimated changes in the rate of solar construction over time and found differences among states: acceleration in Virginia and deceleration in New York. We used parameter estimates to map the relative likelihood of future solar development across the study area. This methodology can be used to anticipate where solar is likely to be built in different landscapes and how these patterns align with conservation goals. Around the Chesapeake Bay watershed, the selection of lower quality agricultural areas for solar energy minimizes removal of important habitat and provides opportunities for native plant and pollinator restoration.

Artificial Intelligence↗

Robust Time-Varying Parameter Identification for Composite Load Modeling

With the increasing integration of uncertain resources, e.g., renewables, electric vehicles, and demand responses, it is imperative to understand the characteristics of loads for power system analysis and control. Challenges of load modeling come from a variety of load components and time-varying compositions. In addition, the existence of outliers in measurements further complicates the problem. This paper proposes a robust time-varying parameter identification technique for composite ZIP and induction motor load models. A batch-model regression form, including time-varying parameters, is established based on state transition models and observation models with current observations and previous predictions to guarantee data redundancy. To deal with outliers, down-weighting coefficients of measurements are calculated with a projection statistics approach. Based on the batch-model regression and the down-weighting coefficients, parameter identification at each sample time is formulated as a weighted least squares optimization, which is solved by the Newton-Raphson approach with the previous estimated parameters as the initial iteration values. In addition, parameters' sensitivities to different outliers in measurements are analyzed. Results on the IEEE 57-bus system and IEEE 118-bus system show that the proposed algorithm can robustly identify time-varying parameters for the composite load models.

Composite load model↗

Net thrust calculation sensitivity of an afterburning turbofan engine to variations in input parameters

The calculated value of net thrust of an aircraft powered by a General Electric F404-GE-400 afterburning turbofan engine was evaluated for its sensitivity to various input parameters. The effects of a 1.0-percent change in each input parameter on the calculated value of net thrust with two calculation methods are compared. This paper presents the results of these comparisons and also gives the estimated accuracy of the overall net thrust calculation as determined from the influence coefficients and estimated parameter measurement accuracies.

Hughes, D. L.↗

Identifying the unmodified structural characteristics using multiple modifications

This paper describes a procedure for estimating the free-free modal characteristics of a system by testing multiple constrained states. The procedure eliminates the influences of the constraints on the modal parameters and provides important information at the connection points. For very stiff or very flexible test articles, it is difficult to support the test article and to measure uncompromised modal parameters. The method described in this paper measures the forces and/or responses at constraint-connection points and uses a direct parameter estimation algorithm to calculate the system's free-free characteristics. These free-free characteristics retain the local information at the connection or boundary points, thereby including the important local high frequency residual effects in the modal model.

Barney, Patrick↗

Rotorcraft Blade Mode Damping Identification from Random Responses Using a Recursive Maximum Likelihood Algorithm

An on line technique is presented for the identification of rotor blade modal damping and frequency from rotorcraft random response test data. The identification technique is based upon a recursive maximum likelihood (RML) algorithm, which is demonstrated to have excellent convergence characteristics in the presence of random measurement noise and random excitation. The RML technique requires virtually no user interaction, provides accurate confidence bands on the parameter estimates, and can be used for continuous monitoring of modal damping during wind tunnel or flight testing. Results are presented from simulation random response data which quantify the identified parameter convergence behavior for various levels of random excitation. The data length required for acceptable parameter accuracy is shown to depend upon the amplitude of random response and the modal damping level. Random response amplitudes of 1.25 degrees to .05 degrees are investigated. The RML technique is applied to hingeless rotor test data. The inplane lag regressing mode is identified at different rotor speeds. The identification from the test data is compared with the simulation results and with other available estimates of frequency and damping.

Molusis, J. A.↗

BeyondPlanck: V. Minimal ADC Corrections for Planck LFI

We describe the correction procedure for Analog-to-Digital Converter (ADC) differential non-linearities (DNL) adopted in the Bayesian end-to-end BEYONDPLANCK analysis framework. This method is nearly identical to that developed for the official Planck Low Frequency Instrument (LFI) Data Processing Center (DPC) analysis, and relies on the binned rms noise profile of each detector data stream. However, rather than building the correction profile directly from the raw rms profile, we first fit a Gaussian to each significant ADC-induced rms decrement, and then derive the corresponding correction model from this smooth model. The main advantage of this approach is that only samples which are significantly affected by ADC DNLs are corrected, as opposed to the DPC approach in which the correction is applied to all samples, filtering out signals not associated with ADC DNLs. The new corrections are only applied to data for which there is a clear detection of the non-linearities, and for which they perform at least comparably with the DPC corrections. Out of a total of 88 LFI data streams (sky and reference load for each of the 44 detectors) we apply the new minimal ADC corrections in 25 cases, and maintain the DPC corrections in 8 cases. All these corrections are applied to 44 or 70 GHz channels, while, as in previous analyses, none of the 30 GHz ADCs show significant evidence of non-linearity. By comparing the BEYONDPLANCK and DPC ADC correction methods, we estimate that the residual ADC uncertainty is about two orders of magnitude below the total noise of both the 44 and 70 GHz channels, and their impact on current cosmological parameter estimation is small. However, we also show that non-idealities in the ADC corrections can generate sharp stripes in the final frequency maps, and these could be important for future joint analyses with the Planck High Frequency Instrument (HFI), Wilkinson Microwave Anisotropy Probe (WMAP), or other datasets. We therefore conclude that, although the existing corrections are adequate for LFI-based cosmological parameter analysis, further work on LFI ADC corrections is still warranted.

79 ASTRONOMY AND ASTROPHYSICS↗

Benchmarking optimization methods for materials research: Gradient descent and Bayesian optimization for lithium-ion battery aging diagnostics

Accurate and efficient parameter estimation is essential for battery diagnostics and aging analysis. Here, in this study, we compare two optimization-based approaches—gradient descent and Bayesian optimization—for extracting parameters from differential voltage analysis in lithium-ion batteries. While these techniques are widely used, their relative strengths and limitations for this application are not well understood. The study evaluates the trade-offs between these methods in terms of result quality, computational cost, and reliability within this specific application. The diagnostic results from our battery data suggest adopting gradient descent as an initial method for rapid and efficient analysis, while employing more stable optimization techniques, such as Bayesian optimization, as a verification step to mitigate potential instability. Comparing the two methods provides information on algorithmic choice, while inspiring further discussions on selecting appropriate techniques for specific research tasks.

Zhao, Ziqing [Boston Univ., MA (United States)] (O↗

Measurement updating using the U-D factorization

A new mechanization of the Kalman updating algorithm based on a U-D factorization of the estimate error covariance is introduced. Efficient and stable updating recursions are developed for the unit upper triangular factor U and the diagonal factor D, treating only the parameter estimation problem. Properties of the factorization update performed here include efficient one point at a time processing that requires little more computation than the optimal but numerically unstable conventional Kalman measurement update algorithm, and stability that compares with the square root filter.

Bierman, G. J.↗

Regional Distribution of Forest Height and Biomass from Multisensor Data Fusion

Elevation data acquired from radar interferometry at C-band from SRTM are used in data fusion techniques to estimate regional scale forest height and aboveground live biomass (AGLB) over the state of Maine. Two fusion techniques have been developed to perform post-processing and parameter estimations from four data sets: 1 arc sec National Elevation Data (NED), SRTM derived elevation (30 m), Landsat Enhanced Thematic Mapper (ETM) bands (30 m), derived vegetation index (VI) and NLCD2001 land cover map. The first fusion algorithm corrects for missing or erroneous NED data using an iterative interpolation approach and produces distribution of scattering phase centers from SRTM-NED in three dominant forest types of evergreen conifers, deciduous, and mixed stands. The second fusion technique integrates the USDA Forest Service, Forest Inventory and Analysis (FIA) ground-based plot data to develop an algorithm to transform the scattering phase centers into mean forest height and aboveground biomass. Height estimates over evergreen (R2 = 0.86, P < 0.001; RMSE = 1.1 m) and mixed forests (R2 = 0.93, P < 0.001, RMSE = 0.8 m) produced the best results. Estimates over deciduous forests were less accurate because of the winter acquisition of SRTM data and loss of scattering phase center from tree ]surface interaction. We used two methods to estimate AGLB; algorithms based on direct estimation from the scattering phase center produced higher precision (R2 = 0.79, RMSE = 25 Mg/ha) than those estimated from forest height (R2 = 0.25, RMSE = 66 Mg/ha). We discuss sources of uncertainty and implications of the results in the context of mapping regional and continental scale forest biomass distribution.

Yu, Yifan↗

Autonomous Real-Time Global Aerodynamic Modeling in the Frequency Domain

A method for autonomous real-time global aerodynamic modeling is developed and explained. Local real-time frequency-domain estimates of stability and control derivatives are assembled over the flight envelope as a function of nominal flight condition, accounting for uncertainty in the individual local model parameter estimates. Combining this with real-time estimates of low-frequency aerodynamics in the time domain produces a real-time global aerodynamic model with good prediction capability, simple evaluation of local stability and control derivatives, insight into the aerodynamic dependencies, and the ability to capture local variations in the aerodynamic dependencies throughout the flight envelope. The technique is demonstrated using data from an F-16 nonlinear simulation and flight test data from a subscale aircraft.

Eugene A Morelli↗

Fault Detection and Performance Monitoring of Propellers in Electric UAV

Unmanned aerial vehicles (UAVs) are used in various industries such as agriculture and logistics, to name but a few, where their applications are beyond basic mapping, surveillance, and photography. In near future, UAVs are expected to be used in package delivery service and larger electric vertical takeoff and landing vehicles will be employed for urban air mobility applications (air taxi). Thus, several electric propulsion systems will enter the low-altitude airspace with frequent take offs and landings. To achieve state-of-the-art safety standards under such high traffic density, UAVs will require in-time fault detection and performance monitoring of critical powertrain components. This work focuses on propeller blade performance and damage detection in electric UAVs. Propellers are the fastest moving component in an UAV; even a minor defect in the propeller blades could cause performance deterioration, with consequent challenges in flying through the planned trajectory or adhere to the safety requirements of the operation. Monitoring and updating aerodynamic efficiency of each rotor would therefore enable the detection of off-nominal propeller conditions thus magnifying the state-awareness of powertrain monitoring systems based on the acquired electrical signals. We use an extended Kalman filter-based parameter estimation algorithm that incorporates time history responses from UAV powertrain in conjunction with a full powertrain system model. Propeller fault detection is achieved by incorporating the aerodynamic parameters of propeller into the powertrain model. The proposed technique is successfully validated with numerical simulations.

Unmanned aerial vehicles↗

Sensor Error Estimation for Reactor Coolant System with Generalization Error Equations

We consider a simplified version of the sensor error estimation problem in pressure sensors in the primary coolant system of a nuclear power plant under the condition that a majority of sensors are error-free. We present a sensor fusion method to estimate sensor errors in the primary coolant system of a power reactor by using measurements collected by multiple sensors. The underlying relationship between the measured and estimated parameters is inferred using measurements collected under controlled no-error conditions of the plant. We propose a machine learning approach to train fusers that provide an estimate of the sensor measurement by using measurements from other sensors, and the difference between the actual sensor measurement and its estimate provides the sensor estimate. We present generalization error equations for these methods that characterize the performance of their sensor error estimates on future measurements using the distribution-free machine learning formulation.

Rao, Nageswara S.↗

Sensitivity of the U.S. economy to oil prices controlling for domestic production and imports

This paper investigates the sensitivity of U.S. economic performance to oil price changes, accounting for changes in the domestic petroleum supply-demand balance over the last decade. Herein, a non-linear (asymmetric) autoregressive distributed lag (NARDL) model is used to estimate the U.S. GDP elasticity with respect to the oil price, controlling for oil production, consumption and imports, and macroeconomic variables. The positive and negative components of the oil price both have statistically significant long-run impacts on the real U.S. GDP. The parameter estimates imply that a 1% positive and permanent oil price shock, all else the same, would have a long-run impact of –0.045% on the U.S. economy (an elasticity of –0.045), but short-run parameters on the positive oil price terms are not significant at the 10% level. The long-run parameter on the negative oil price component term implies an elasticity of –0.034. Thus, controlling for domestic U.S. oil production and oil trade, the long-run oil price elasticity of the U.S. GDP remains within the range of estimates from previous studies. The results also show that domestic oil production and consumption have short-run impacts on the U.S. GDP. The potential extent of interactions among these variables, and implications for the net economic impacts, under an oil price shock are subjects of future research.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗