Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOSPHIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Strategies for Thinning Graded Buffer Regions in Metamorphic Solar Cells and Performance Tradeoffs

Compositionally graded buffers (CGBs) have enabled the development of inverted metamorphic (IMM) multijunction solar cells that contain three or more junctions and exhibit record efficiencies. Typically, the CGB is grown thick with a constant grading rate, because this is the most straightforward way to minimize the threading dislocation density (TDD) in device active regions. The CGB growth represents a significant expense, in terms of materials consumption and capital cost, however, hampering the economic viability of metamorphic devices. This work explores strategies for thinning Ga1-xInxP CGBs from GaAs to InP while minimizing performance loss, as evaluated by the open-circuit voltage (VOC) of ~0.74 eV Ga0.47In0.53As solar cells. Using the Ga1-xInxP CGB as a model, we demonstrate that slower grading is necessary in certain regions of the grade where dislocation nucleation rates are higher. Grading must be more gradual in these regions to suppress threading dislocation density. Grading rates can be increased in non-critical areas where dislocation nucleation is lower, permitting a thinner buffer. We demonstrate the relationship between VOC and TDD, establishing tradeoffs between thickness and performance. Through careful design, we demonstrate a CGB with a 40% thickness reduction (2 im) achieved with a VOC decrease of only 6.3% (21 mV).

14 SOLAR ENERGY↗

Investigation of GaP/Si Heteroepitaxy on MOCVD Prepared Si(100) Surfaces

Antiphase-domain (APD) free growth of GaP on Si has been achieved on Si surfaces prepared in situ by etching with AsH3. The pre-nucleation AsH3 etching removes O and C contaminants at a relatively low temperature, and creates a single-domain arsenic-terminated Si surface. The As-As dimer rows are all parallel to the step edges, and subsequent GaP growth by MOCVD retains this dimerization orientation. Both LEED and TEM indicate that the resulting epilayer is APD-free, and could thereby serve as a template for III-V/Si multijunction solar cells.

14 SOLAR ENERGY↗

Towards the Ultimate Multi-Junction Solar Cell using Transfer Printing

Transfer printing is a uniquely enabling technology for the heterogeneous integration of III-V materials grown on dissimilar substrates. In this paper, we present experimental results for a mechanically stacked tandem cell using GaAs and GaSb-based materials capable of harvesting the entire solar spectrum with 44.5% efficiency. We also present the latest results toward developing an ultra-high performance heterogeneous cell, integrating materials grown on GaAs, InP and GaSb platforms.

14 SOLAR ENERGY↗

Demonstrating the GaInP/GaAs Three-Terminal Heterojunction Bipolar Transistor Solar Cell

The three-terminal heterojunction bipolar transistor solar cell (HBTSC) concept enables the realization of a monolithic double-junction device with individual current extraction. We present an HBTSC realized by a heterojunction of GaInP and GaAs. The one-sun open-circuit voltage (V OC ) of the top and bottom junctions are 1.33 V and 0.99 V, respectively, while fill factors (FF) are above 80%. At one-sun illumination, reducing one junction's bias from V OC to maximum power point degrades the performance of the other junction only slightly (<; 0.5% efficiency loss). These results demonstrate the potential of the HBTSC concept to produce high-efficiency independently connected double-junction solar cells.

14 SOLAR ENERGY↗

Templated Vapor-Liquid-Solid Epitaxy of III-V Semiconductors on Silicon

Epitaxial growth on silicon remains the most promising method to reduce the cost of optoelectronic-quality III-V semiconductors. Several approaches exist to epitaxially grow III-V material from the vapor phase, but control of 3-D structures remains difficult with these methods. In this work, we present a novel epitaxial growth technique in which photolithography and wet etching are used to establish the geometry of group-III metal, which is then converted to III-V semiconductor by annealing with exposure group-V precursor. The resulting material has been shown to align to the substrate lattice and is optically active, making it a promising approach for III-V PV technologies.

government↗

Luminescence enhancement of plasma-etched InAsP/InGaAsP quantum wells

Luminescence enhancement effects are observed in the plasma-etched InAs{sub 0.45}P{sub 0.55}/In{sub 0.68}Ga{sub 0.32}As{sub 0.45}P{sub 0.55} quantum wells (QWs). Characterizations of photoluminescence, atomic force microscopy, and secondary-ion mass spectroscopy reveal that surface roughening due to ion bombardment onto surface and microstructure changes resulted from Ar{sup +} ions tunneling into the material in the plasma etching process account for the PL enhancement phenomenon. The combination of plasma etching and selective lift-off of the InP cap layer of the InAs{sub 0.45}P{sub 0.55}/In{sub 0.68}Ga{sub 0.32}As{sub 0.45}P{sub 0.55} QW structures allows us to separate the two enhancement factors, which indicates the Ar{sup +} ions tunneling into the crystal is the dominant factor that enhances the luminescence emission of InAs{sub 0.45}P{sub 0.55}/In{sub 0.68}Ga{sub 0.32}As{sub 0.45}P{sub 0.55} quantum wells.

36 MATERIALS SCIENCE↗

Investigation of InP etching mechanisms in a Cl{sub 2}/H{sub 2} inductively coupled plasma by optical emission spectroscopy

Optical emission spectroscopy (OES) has been used in order to investigate the InP etching mechanisms in a Cl{sub 2}-H{sub 2} inductively coupled plasma. The authors have previously shown that anisotropic etching of InP could be achieved for a H{sub 2} percentage in the 35%-45% range where the InP etch rate also presents a local maximum [J. Vac. Sci. Technol. B 24, 2381 (2006)], and that anisotropic etching was due to an enhanced passivation of the etched sidewalls by a silicon oxide layer [J. Vac. Sci. Technol. B 26, 666 (2008)]. In this work, it is shown that this etching behavior is related to a maximum in the H atom concentration in the plasma. The possible enhancement of the sidewall passivation process in the presence of H is investigated by comparing OES measurements and etching results obtained for Cl{sub 2}-H{sub 2} and Cl{sub 2}-Ar gas mixtures.

36 MATERIALS SCIENCE↗

Inverse Stranski-Krastanov growth in InGaAs/InP

Thin films of In{sub x}Ga{sub 1-x}As are observed to develop either islands or pits on the surface to relieve lattice mismatch strain after some critical thickness depending on the composition of the film. The composition is thought to alter either the surface energy or the equilibrium adatom concentration of the growing film, thus changing which strain relieving features, islands, or pits nucleate on the surface first. Once pits form, their behavior is similar to that of islanding, resulting in an ''inverse'' Stranski-Krastanov growth mode. Furthermore, the atomic surface structure near the pits is different than away from the pits and is correlated with island formation.

36 MATERIALS SCIENCE↗

Effect of Cl{sub 2}- and HBr-based inductively coupled plasma etching on InP surface composition analyzed using in situ x-ray photoelectron spectroscopy

A Cl{sub 2}-HBr-O{sub 2}/Ar inductively coupled plasma (ICP) etching process has been adapted for the processing of InP-based heterostructures in a 300-mm diameter CMOS etching tool. Smooth and anisotropic InP etching is obtained at moderate etch rate ({approx}600 nm/min). Ex situ x-ray energy dispersive analysis of the etched sidewalls shows that the etching anisotropy is obtained through a SiO{sub x} passivation mechanism. The stoichiometry of the etched surface is analyzed in situ using angle-resolved x-ray photoelectron spectroscopy. It is observed that Cl{sub 2}-based ICP etching results in a significantly P-rich surface. The phosphorous layer identified on the top surface is estimated to be {approx}1-1.3-nm thick. On the other hand InP etching in HBr/Ar plasma results in a more stoichiometric surface. In contrast to the etched sidewalls, the etched surface is free from oxides with negligible traces of silicon. Exposure to ambient air of the samples submitted to Cl{sub 2}-based chemistry results in the complete oxidation of the P-rich top layer. It is concluded that a post-etch treatment or a pure HBr plasma step may be necessary after Cl{sub 2}-based ICP etching for the recovery of the InP material.

36 MATERIALS SCIENCE↗

Surface chemistry of InP ridge structures etched in Cl{sub 2}-based plasma analyzed with angular XPS

Two x-ray photoelectron spectroscopy configurations are proposed to analyze the surface chemistry of micron-scale InP ridge structures etched in chlorine-based inductively coupled plasma (ICP). Either a classical or a grazing configuration allows to retrieve information about the surface chemistry of the bottom surface and sidewalls of the etched features. The procedure is used to study the stoichiometry of the etched surface as a function of ridge aspect ratio for Cl{sub 2}/Ar and Cl{sub 2}/H{sub 2} plasma chemistries. The results show that the bottom surface and the etched sidewalls are P-rich, and indicate that the P-enrichment mechanism is rather chemically driven. Results also evidence that adding H{sub 2} to Cl{sub 2} does not necessarily leads to a more balanced surface stoichiometry. This is in contrast with recent experimental results obtained with the HBr ICP chemistry for which fairly stoichiometric surfaces have been obtained.

36 MATERIALS SCIENCE↗

Cross-sectional scanning tunneling microscopy of antiphase boundaries in epitaxially grown GaP layers on Si(001)

In a fundamental cross-sectional scanning tunneling microscopy investigation on epitaxially grown GaP layers on a Si(001) substrate, differently oriented antiphase boundaries are studied. They can be identified by a specific contrast and by surface step edges starting/ending at the position of an antiphase boundary. Moreover, a change in the atomic position of P and Ga atoms along the direction of growth is observed in agreement with the structure model of antiphase boundaries in the GaP lattice. This investigation opens the perspective to reveal the orientation and position of the antiphase boundaries at the atomic scale due to the excellent surface sensitivity of this method.

42 ENGINEERING↗

Super-resolution reconstruction for 4D computed tomography of the lung via the projections onto convex sets approach

Purpose: The use of 4D computed tomography (4D-CT) of the lung is important in lung cancer radiotherapy for tumor localization and treatment planning. Sometimes, dense sampling is not acquired along the superior–inferior direction. This disadvantage results in an interslice thickness that is much greater than in-plane voxel resolutions. Isotropic resolution is necessary for multiplanar display, but the commonly used interpolation operation blurs images. This paper presents a super-resolution (SR) reconstruction method to enhance 4D-CT resolution. Methods: The authors assume that the low-resolution images of different phases at the same position can be regarded as input “frames” to reconstruct high-resolution images. The SR technique is used to recover high-resolution images. Specifically, the Demons deformable registration algorithm is used to estimate the motion field between different “frames.” Then, the projection onto convex sets approach is implemented to reconstruct high-resolution lung images. Results: The performance of the SR algorithm is evaluated using both simulated and real datasets. Their method can generate clearer lung images and enhance image structure compared with cubic spline interpolation and back projection (BP) method. Quantitative analysis shows that the proposed algorithm decreases the root mean square error by 40.8% relative to cubic spline interpolation and 10.2% versus BP. Conclusions: A new algorithm has been developed to improve the resolution of 4D-CT. The algorithm outperforms the cubic spline interpolation and BP approaches by producing images with markedly improved structural clarity and greatly reduced artifacts.

60 APPLIED LIFE SCIENCES↗

Thermal Conductivity of Tetragonal Cadmium Diphosphide Crystals

Tetragonal cadmium diphosphide (β-CdP{sub 2}) single crystals with high structural perfection have been grown and their thermal conductivity has been measured. The results indicate that the higher thermal conductivity across the c axis corresponds to the smaller unit-cell parameter of the crystals (a = 5.08 ± 0.01 Å and c = 18.59 ± 0.05 Å). The observed thermal conductivity anisotropy is tentatively attributed to the fact that structural basis of β-CdP{sub 2} is made up of spectral phosphorus chains running in the [100] and [010] directions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Growth of ZnGeP{sub 2} crystals from melt

Some features of the growth of ZnGeP{sub 2} single crystals by the Bridgman method have been considered. The ratio of the thermal-conductivity coefficients of the liquid and solid phases of ZnGeP{sub 2} at the melting temperature was estimated to be 2.3. It is established that, in the case of ZnGeP{sub 2} growth on a seed, the most favorable crystallographic directions are <100> and <001>. It is shown that annealing and electron irradiation significantly decrease the optical absorption coefficient in the impurity absorption region.

36 MATERIALS SCIENCE↗

Solution of the inverse problem for reconstructing the real structure of materials from the data of different X-ray methods

A software program has been developed for joint solution of the inverse problem on the basis of the X-ray diffractometry and reflectometry data. A system of basic objects supporting some functions of automatic data flow processing in the program and oriented to mathematical calculations has been created. It is shown by the example of experimental data for an In{sub x}Ga{sub 1-x}As-In{sub y}Al{sub 1-y}As/InP(001) sample that joint fitting of X-ray diffractometry and reflectometry curves makes it possible to reconstruct the model parameters of a multilayer with smaller rms errors. The data were processed taking into account the angular dependences of the background intensity and the aperture factors stemming from the geometry of the experiment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The electrical and structural properties of In{sub y}Ga{sub 1-y}As/In{sub x}Al{sub 1-x}As/InP quantum wells with different InAs content

In{sub x}Al{sub 1-x}As/In{sub y}Ga{sub 1-y}As/In{sub x}Al{sub 1-x}As/InP HEMT structures has been investigated with a change in the InAs molar fraction both in the quantum well and the buffer layer. The electrical parameters of the samples are measured at different temperatures. The structural parameters of the layers and the characteristics of the interfaces between them are determined by double-crystal X-ray diffraction. An increase in the Hall mobility and electron concentration, as well as in the structural quality of the samples, is observed alongside an increase in the InAs molar fraction in the quantum well. It is established that high electron mobility is retained at small (to 5%) mismatches between the buffer layer and substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

X-ray diffraction analysis of multilayer porous InP(001) structure

Multilayer structures composed of four porous bilayers have been studied by high-resolution X-ray diffraction using synchrotron radiation, and the photoluminescence of these structures has been investigated at 4 K. The porous structures were formed by anodic oxidation of InP(001) substrates in aqueous HCl solution. The structural parameters of the sublayers were varied by changing the electrochemical etching mode (potentiostatic/galvanostatic). The X-ray scattering intensity maps near the InP 004 reflection are obtained. A model for scattering from such systems is proposed based on the statistical dynamical diffraction theory. Theoretical scattering maps have been fitted to the experimental ones. It is shown that a mathematical analysis of the scattering intensity maps makes it possible to determine the structural parameters of sublayers. The reconstructed parameters (thickness, strain, and porosity of sublayers and the shape and arrangement of pores) are in satisfactory agreement with the scanning electron microscopy data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and electrical properties of quantum wells with nanoscale InAs inserts in In{sub y}Al{sub 1-y}As/In{sub x}Ga{sub 1-x}As heterostructures on InP substrates

A complex study of the effect ofintroduction of nanoscale InAs inserts of different thicknesses into an In{sub 0.53}Ga{sub 0.47}As quantum well on the electrical properties and structural features of In{sub 0.50}Al{sub 0.50}As/In{sub 0.53}Ga{sub 0.47}As/In{sub 0.50}Al{sub 0.50}As nanoheterostructures with bilateral {delta}-Si doping grown on InP substrates has been performed. The layers of nanoheterostructures with a weak lattice mismatch are found to be equally (cube-on-cube) oriented. The introduction of a nanoscale InAs insert leads to an increase in mobility. At an insert thickness of about 1.8 nm, the effect of increasing mobility is saturated due to structural deterioration. The segregation of the second (apparently, wurtzite) phase is revealed; this process, as well as the formation of other defects in the nanoheterostructure layers, is due to local strains caused by variations of the indium content in the layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗