Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHASE STUDIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Space station WP-04 power system. Volume 2: Study results

Results of the phase B study contract for the definition of the space station Electric Power System (EPS) are presented in detail along with backup information and supporting data. Systems analysis and trades, preliminary design, advanced development, customer accommodations, operations planning, product assurance, and design and development phase planning are addressed. The station design is a hybrid approach which provides user power of 25 kWe from the photovoltaic subsystem and 50 kWe from the solar dynamic subsystem. The electric power is distributed to users as a utility service; single phase at a frequency of 20 kHz and voltage of 440VAC. The solar array NiH2 batteries of the photovoltaic subsystem are based on commonality to those used on the co-orbiting and solar platforms.

Hallinan, G. J.↗

The D/H and C/H ratios in Jupiter from the CH3D phase

A study is made of D/H and C/H ratios in Jupiter from the CH3D phase, noting the previous investigations have yielded inconsistent results. Spectra are analyzed by a comprehensive comparison with realistically computed synthetic spectra generated by the numerical solution of the radiative transfer equation for inhomogeneous Jovian and telluric atmospheric models. Results are presented in terms of: (1) the apparent enhancement of both D and C in Jupiter, (2) the apparent deuterium overabundance, and (3) the variability of the CH3D column abundance.

Beer, R.↗

A Phase I/II Radiation Dose Escalation Study With Concurrent Chemotherapy for Patients With Inoperable Stages I to III Non-Small-Cell Lung Cancer: Phase I Results of RTOG 0117

Purpose: In preparation for a Phase III comparison of high-dose versus standard-dose radiation therapy, this Phase I/II study was initiated to establish the maximum tolerated dose of radiation therapy in the setting of concurrent chemotherapy, using three-dimensional conformal radiation therapy for non-small-cell lung cancer. Methods and Materials: Eligibility included patients with histologically proven, unresectable Stages I to III non-small-cell lung cancer. Concurrent chemotherapy consisted of paclitaxel, 50 mg/m{sup 2}, and carboplatin, AUC of 2, given weekly. The radiation dose was to be sequentially intensified by increasing the daily fraction size, starting from 75.25 Gy/35 fractions. Results: The Phase I portion of this study accrued 17 patients from 10 institutions and was closed in January 2004. After the initial 8 patients were accrued to cohort 1, the trial closed temporarily on September 26, 2002, due to reported toxicity. Two acute treatment-related dose-limiting toxicities (DLTs) were reported at the time: a case of grade 5 and grade 3 radiation pneumonitis. The protocol, therefore, was revised to de-escalate the radiation therapy dose (74 Gy/37 fractions). Patients in cohort 1 continued to develop toxicity, with 6/8 (75%) patients eventually developing grade >=3 events. Cohort 2 accrued 9 patients. There was one DLT, a grade 3 esophagitis, in cohort 2 in the first 5 patients (1/5 patients) and no DLTs for the next 2 patients (0/2 patients). Conclusions: The maximum tolerated dose was determined to be 74 Gy/37 fractions (2.0 Gy per fraction) using three-dimensional conformal radiation therapy with concurrent paclitaxel and carboplatin therapy. This dose level in the Phase II portion has been well tolerated, with low rates of acute and late lung toxicities.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Phase A conceptual design study of the Atmospheric, Magnetospheric and Plasmas in Space (AMPS) payload

The 12 month Phase A Conceptual Design Study of the Atmospheric, Magnetospheric and Plasmas in Space (AMPS) payload performed within the Program Development Directorate of the Marshall Space Flight Center is presented. The AMPS payload makes use of the Spacelab pressurized module and pallet, is launched by the space shuttle, and will have initial flight durations of 7 days. Scientific instruments including particle accelerators, high power transmitters, optical instruments, and chemical release devices are mounted externally on the Spacelab pallet and are controlled by the experimenters from within the pressurized module. The capability of real-time scientist interaction on-orbit with the experiment is a major characteristic of AMPS.

Source record↗

Collective modes in the color flavor-locked phase.

We study the low-energy effective action for some collective modes of the color flavor-locked (CFL) phase of QCD. This phase of matter has long been known to be a superfluid because by picking a phase its order parameter breaks the quark-number U(1){sub B} symmetry spontaneously. We consider the modes describing fluctuations in the magnitude of the condensate, namely the Higgs mode, and in the phase of the condensate, namely the Nambu-Goldstone (NG) (or Anderson-Bogoliubov) mode associated with the breaking of U(1){sub B}. By employing as microscopic theory the Nambu-Jona-Lasinio model, we reproduce known results for the Lagrangian of the NG field to the leading order in the chemical potential and extend such results evaluating corrections due to the gap parameter. Moreover, we determine the interaction terms between the Higgs and the NG field. This study paves the way for a more reliable study of various dissipative processes in rotating compact stars with a quark matter core in the CFL phase.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reusable Reentry Satellite (RRS): Launch tradeoff study

A goal of the Phase B study is to define the launch system interfaces for the reusable reentry satellite (RRS) program. The focus of the launch tradeoff study, documented in this report, is to determine which expendable launch vehicles (ELV's) are best suited for the RRS application by understanding the impact of all viable launch systems on RRS design and operation.

Source record↗

Space Station Furnace Facility. Volume 2: Requirements definition and conceptual design study

The Space Station Freedom Furnace (SSFF) Project is divided into two phases: phase 1, a definition study phase, and phase 2, a design and development phase. TBE was awarded a research study entitled, 'Space Station Furnace Facility Requirements Definition and Conceptual Design Study' on June 2, 1989. This report addresses the definition study phase only. Phase 2 is to be complete after completion of phase 1. The contract encompassed a requirements definition study and culminated in hardware/facility conceptual designs and hardware demonstration development models to test these conceptual designs. The study was divided into two parts. Part 1 (the basic part of the effort) encompassed preliminary requirements definition and assessment; conceptional design of the SSFF Core; fabrication of mockups; and preparation for the support of a conceptional design review (CoDR). Part 2 (the optional part of the effort) included detailed definition of the engineering and design requirements, as derived from the science requirements; refinement of the conceptual design of the SSFF Core; fabrication and testing of the 'breadboards' or development models; and preparation for and support of a requirements definition review.

Source record↗

Microgravity studies in the liquid phase immiscible system, aluminum-indium

As part of a study to understand the influence of gravity, cooling rate and composition on the structure of liquid phase immiscible materials, two alloys, Al-40 wt % In and Al-70 wt % In were thermally treated on the SPAR II rocket flight. The treatments involved homogenization at a temperature above the miscibility gap and then rapid cooling through the miscibility gap followed by complete solidification. The last two steps were performed while acceleration levels were less than 4 x 10 to the -5th g. The flight alloys produced unexpected results. Instead of fine uniform structures, the alloys consisted of a macroscopically sized aluminum-rich central region surrounded by indium-rich metal.

Gelles, S. H.↗

Comprehensive study of the magnetic phase transitions in Tb 3 Co combining thermal, magnetic and neutron diffraction measurements

A comprehensive study of the magnetic phase transitions in Tb 3 Co has been undertaken combining different techniques. Using single crystal neutron diffraction in the paramagnetic state a weak crystal structure distortion from the room temperature orthorhombic structure of the Fe 3 C type described with the Pnma space group toward structure with lower symmetry has been observed with cooling below 100 K. At 81 K there is a second order phase transition to an antiferromagnetic incommensurate phase with the propagation vector k = (0.155, 0, 0). As derived from thermal diffusivity measurements, the critical exponents for this transition are very close to the 3D-Heisenberg universality class, proving that the magnetic interactions are short-range but with a deviation from perfect isotropy due to crystal field effects. At T 2 ≈ 70 K there is another magnetic phase transition to a ferromagnetic state whose character is shown to be weakly first order. The low temperature magnetic state has a non-coplanar ferromagnetic structure with strong ferromagnetic components of Tb magnetic moments along the crystallographic c-axis. The application of an external magnetic field B = 2 T along the crystallographic c-axis suppresses the incommensurate antiferromagnetic phase and gives rise to the ferromagnetic phase. The magnetic entropy peak change as well as the refrigerant capacity indicate that Tb 3 Co is a competitive magnetocaloric material in this temperature range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

PRELIMINARY STUDY OF CERAMICS FOR IMMOBILIZATION OF ADVANCED FUEL CYCLE REPROCESSING WASTES

The Savannah River National Laboratory (SRNL) developed a series of ceramic waste forms for the immobilization of Cesium/Lanthanide (CS/LN) and Cesium/Lanthanide/Transition Metal (CS/LN/TM) waste streams anticipated to result from nuclear fuel reprocessing. Simple raw materials, including Al{sub 2}O{sub 3}, CaO, and TiO{sub 2} were combined with simulated waste components to produce multiphase ceramics containing hollandite-type phases, perovskites (particularly BaTiO{sub 3}), pyrochlores, zirconolite, and other minor metal titanate phases. Identification of excess Al{sub 2}O{sub 3} via X-ray Diffraction (XRD) and Scanning Electron Microscopy with Energy Dispersive Spectroscopy (SEM/EDS) in the first series of compositions led to a Phase II study, with significantly reduced Al{sub 2}O{sub 3} concentrations and increased waste loadings. Three fabrication methodologies were used, including melting and crystallizing, pressing and sintering, and Spark Plasma Sintering (SPS), with the intent of studying phase evolution under various sintering conditions. XRD and SEM/EDS results showed that the partitioning of the waste elements in the sintered materials was very similar, despite varying stoichiometry of the phases formed. The Phase II compositions generally contained a reduced amount of unreacted Al{sub 2}O{sub 3} as identified by XRD, and had phase assemblages that were closer to the initial targets. Chemical composition measurements showed no significant issues with meeting the target compositions. However, volatilization of Cs and Mo was identified, particularly during melting, since sintering of the pressed pellets and SPS were performed at lower temperatures. Partitioning of some of the waste components was difficult to determine via XRD. SEM/EDS mapping showed that those elements, which were generally present in small concentrations, were well distributed throughout the waste forms. Initial studies of radiation damage tolerance using ion beam irradiation at Los Alamos National Laboratory (LANL) showed little if any modification of the material after irradiation. Additional study in this area is needed. Chemical durability was briefly studied using the Product Consistency Test (PCT). Most of the elements measured were retained by the ceramic waste forms, indicating good chemical durability. Cs, Mo, and Rb were released at somewhat higher rates as compared to the matrix components, although benchmark compositions and additional characterization are needed in order to qualify the PCT results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

An in-situ neutron diffraction study of a multi-phase transformation and twinning-induced plasticity steel during cyclic loading

In-situ neutron diffraction during cyclic tension-compression loading (∼+3.5% to −2.8%) of a 17Mn-3Al-2Si-1Ni-0.06C steel that exhibits concurrent transformation and twinning -induced plasticity effects indicated a significant contribution of intragranular back stresses to the observed Bauschinger effect. Rietveld analysis revealed a higher rate of martensitic transformation during tension compared to compression. Throughout cycling, α′-martensite exhibited the highest phase strains such that it bears an increasing portion of the macroscopic load as its weight fraction evolves. On the other hand, the ε-martensite strain remained compressive as it accommodated most of the internal strains caused by the shape misfit associated with the γ→ε and/or ε→α′ transformations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-temperature X-ray diffraction study of crystallization and phase segregation on spinel-type lithium manganese oxides

To study crystallization process of spinel-type Li{sub 1+x}Mn{sub 2-x}O{sub 4}, in-situ high-temperature X-ray diffraction technique (HT-XRD) was utilized for the mixture consisting of Li{sub 2}CO{sub 3} and Mn{sub 2}O{sub 3} as starting material in the temperature range of 25-700 deg. C. In-situ HT-XRD analysis directly revealed that crystallization process of Li{sub 1+x}Mn{sub 2-x}O{sub 4} was significantly affected by the difference in the Li/Mn molar ratio in the precursor. Single phase of stoichiometric LiMn{sub 2}O{sub 4} formed at 700 deg. C. The formation of single phase of spinel was achieved at the lower temperature than the stoichiometric sample as Li/Mn molar ratio in the precursor increased. Lattice parameter of the stoichiometric LiMn{sub 2}O{sub 4} at 25 deg. C was 8.24 A and expanded to 8.31 A at 700 deg. C, which corresponds to the approximately 3% expansion in the unit cell volume. From the slope of the lattice parameter change as a function of temperatures, linear thermal expansion coefficient of the stoichiometric LiMn{sub 2}O{sub 4} was calculated to be 1.2x10{sup -5} deg. C{sup -1} in this temperature range. When the Li/Mn molar ratio in Li{sub 1+x}Mn{sub 2-x}O{sub 4} increased (x > 0.1), the spinel phase segregated into the Li{sub 1+y}Mn{sub 2-y}O{sub 4} (x > y) and Li{sub 2}MnO{sub 3} during heating, which involved the oxygen loss from the materials. During the cooling process from 700 deg. C, and the segregated phase merged into Li{sub 1+x}Mn{sub 2-x}O{sub 4} with oxygen incorporation. Such trend directly observed by in-situ HT-XRD was supported by thermal gravimetric analysis as reversible weight (oxygen) loss/gain at higher temperature (500-700 deg. C). - Graphical abstract: Non-linear variation of lattice parameters of the Li excess LiMn{sub 2}O{sub 4} spinels was observed during cooling process from 700 to 25 deg. C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observational studies of the clearing phase in proto-planetary disk systems

A summary of the work completed during the first year of a 5 year program to observationally study the clearing phase of proto-planetary disks is presented. Analysis of archival and current IUE data, together with supporting optical observations has resulted in the identification of 6 new proto-planetary disk systems associated with Herbig Ae/Be stars, the evolutionary precursors of the beta Pictoris system. These systems exhibit large amplitude light and optical color variations which enable us to identify additional systems which are viewed through their circumstellar disks including a number of classical T Tauri stars. On-going IUE observations of Herbig Ae/Be and T Tauri stars with this orientation have enabled us to detect bipolar emission plausibly associated with disk winds. Preliminary circumstellar extinction studies were completed for one star, UX Ori. Intercomparison of the available sample of edge-on systems, with stars ranging from 1-6 solar masses, suggests that the signatures of accreting gas, disk winds, and bipolar flows and the prominence of a dust-scattered light contribution to the integrated light of the system decreases with decreasing IR excess.

Grady, Carol A.↗

Phase transformation and wear studies of plasma sprayed yttria stabilized zirconia coatings containing various mol% of yttria

Plasma sprayable grade zirconia powders doped with various mol% of yttria (0, 2, 3, 4, 6, 8 and 12 mol%) were synthesized by a chemical co-precipitation route. The coprecipitation conditions were adjusted such that the powders possessed good flowability in the as calcined condition and thus avoiding the agglomeration step like spray drying. Identical plasma spray parameters were used for plasma spraying all the powders on stainless steel plates. The powders and plasma sprayed coatings were characterized by X-ray diffractometry, Scanning Electron Microscopy and Raman spectroscopy. Zirconia powders are susceptible to phase transformations when subjected to very high temperatures during plasma spraying and XRD is insensitive to the presence of some non crystalline phases and hence Raman spectroscopy was used as an important tool. The microstructure of the plasma sprayed coatings showed a bimodal distribution containing fully melted and unmelted zones. The microhardness and wear resistance of the plasma sprayed coatings were determined. Among the plasma sprayed coatings, 3 mol% yttria stabilized zirconia coating containing pure tetragonal zirconia showed the highest wear resistance. - Research Highlights: {yields} Preparation plasma sprayable YSZ powders without any agglomeration process and plasma spraying {yields} Phase transformation studies of plasma sprayed YSZ coatings by XRD and Raman spectroscopy {yields} Microstructure of the plasma sprayed coatings exhibited bimodal distribution {yields} Plasma sprayed 3 mol% YSZ coating exhibited the highest wear resistance {yields} Higher wear resistance is due to the higher fracture toughness of tetragonal 3 mol% YSZ phase.

36 MATERIALS SCIENCE↗

Evaluation of Hands-Free Devices for Space Habitat Maintenance Procedures

Currently, International Space Station (ISS) crews use a laptop computer to display procedures for performing onboard maintenance tasks. This approach has been determined to be suboptimal. A heuristic evaluation and two studies have been completed to test commercial off-the-shelf (COTS) "near-eye" heads up displays (HUDs) for support of these types of maintenance tasks. In both studies, subjects worked through electronic procedures to perform simple maintenance tasks. As a result of the Phase I study, three HUDs were down-selected to one. In the Phase II study, the HUD was compared against two other electronic display devices - a laptop computer and an e-book reader. Results suggested that adjustability and stability of the HUD display were the most significant acceptability factors to consider for near-eye displays. The Phase II study uncovered a number of advantages and disadvantages of the HUD relative to the laptop and e-book reader for interacting with electronic procedures.

Hoffman, R. B.↗

Simulator studies of the attack phase of an automatically controlled interceptor

The attack phase of the automatically controlled interceptor is studied in two parts. Part I is a limited simulation conducted to specify the lateral and longitudinal control systems for an automatic interceptor. The results are presented as Nyquist plots and time histories of the airplane variables. Part II uses the control systems developed in Part I, together with a dynamically perfect guidance system, to study the effect of the nonlinear terms in the complete equations of motion and nonlinear aerodynamics on the airplane response. The results are presented as time histories of the airplane and control surface motions.

CONTROL, LONGITUDINAL↗

Observational studies of the clearing phase in proto-planetary disk systems

Progress in this study is summarized for its second year. An extensive program of high dispersion UV spectral studies using the IUE (International Ultraviolet Explorer) has resulted in acquisition of 40 Herbig Ae/Be star and related object spectra. We find that accreting, circumstellar gas is detected with velocities consistent with material in free-fall toward the stars in approximately 38% of the sample. With acquisition of optical measurements of the projected stellar rotational velocities, we find that the systems with accreting gas exhibit systematically higher projected rotational velocities than the systems showing signatures of outflowing material only. When combined with polarimetric and photometric data, the IUE spectra for these stars indicate that accretion in intermediate-mass pre-main sequence stars is confined to the plane of the circumstellar dust disk. This is in contrast to lower-mass PMS stars where accretion, persumably along magnetic field lines, is seen at polar latitudes. Our data also support significant clearing of the central regions of these circumstellar disks, as originally suggested. The model which most closely matches the observational data is accretion from a disk envelope, as developed by Calvet et al. (1994).

Grady, Carol A.↗