Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHASE ANGLE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Solar cycle 21 effects on the Interplanetary Magnetic Field and related parameters at 0.7 and 1.0 AU

Magnetometer data obtained over the course of the previous solar cycle by the Pioneer Venus orbiter at about 0.7 AU and IMP 8 at 1.0 AU are used to compare the long-term behavior of the IMF at these two heliocentric distances. Similarities include an enhancement in the typical or median field magnitude during the declining phase of the solar cycle (as compared to solar maximum or minimum), slight decreases in the Parker spiral angle from the declining phase through solar minimum, similar trends in the Alfvenic and magnetosonic Mach numbers, and a remarkably consistent sector structure. Differences include the temporal behavior of the high-field tail of the field distribution, showing that high fields are most frequently observed during solar maximum at the Earth but during the declining phase of activity at Venus. This feature suggests that the perceived occurrence history of large fields from transient disturbances such as coronal mass ejections is a sensitive function of position within the heliosphere.

Luhmann, J. G.↗

Sensitivity Analysis of a Polyphase Wireless Power Transfer System under Off-Nominal Conditions

Misaligned and/or variable coil airgaps cause coupling coefficient variation in wireless power transfer (WPT) systems, resulting in a decrease in the system’s transmitted power and efficiency. This paper presents sensitivity analyses of a three-phase, Y-Y connected, series-tuned WPT system in the frequency domain in terms of several different electric vehicle wireless charging off-nominal conditions (misalignments in Δ x and Δ y directions, change of airgap Δ z , and the roll Δψ, pitch Δθ, and yaw ΔΦ angles) as specified in Society of Automotive Engineers (SAE) J2954 Standard. Coil inductance matrices were obtained by measuring the self- and mutual inductances of the primary and secondary coil phase windings at variable airgap classes (from 5 cm to 30 cm) for five different charging positions as identified in SAE J2954. These 6 × 6 inductance matrices were used in sensitivity and Plexim/PLECS simulation analyses. The sensitivity of the WPT system was analyzed analytically using the input impedance and phase angle, voltage gain, current gain, quality factor, and coupling coefficient parameters of the series-tuned WPT system. The results were confirmed experimentally on a 50 kW WPT system.

42 ENGINEERING↗

X-ray Irradiance Distribution for an Interferometer with a Curved Biprism Array

The development of interferometry-based X-ray phase contrast imaging systems that provide highly resolved X-rays with spatially-modulated intensity is enabling the full potential of X-ray optics to image phase, attenuation, and small angle scatter properties of soft tissue. In this work we present analytical formulations of a new hardware concept for X-ray phase contrast imaging wherein the phase grating is replaced with an array of Fresnel biprisms. We derive expressions for the irradiance distribution pattern of a biprism interferometer composed of a curved biprism array with multiple biprisms and multiple point sources. These expressions are used to plot fringe patterns for X-ray design parameters, including 1) size, number, and period of X-ray point sources; 2) biprism parameters of material composition, angle, number, and period; and 3) biprism array to X-ray source and detector distances. Analytical results show that the biprism interferometer provides a longitudinally-nonperiodic pattern of spatially modulated intensity different from the Talbot longitudinally-periodic pattern common in grating interferometry. The curvature of the biprism array brings a sharper longitudinal fringe pattern. Experiments are being performed to verify the analytical calculations for a biprism plastic material of SU-8 using a synchrotron source. X-ray biprism material has widely varied indexes of refraction relative to wavelength and thus the separation of the virtual sources and resulting interference fringe period also varies with X-ray wavelength. Our aim is to develop biprism interferometry imaging systems with excellent polychromatic performance that produce high-contrast fringes with spatially incoherent X-ray illumination. Biprism interferometry will potentially provide higher fringe visibility with better image quality to that of diffraction grating interferometry.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

The interface character distribution of cold-rolled and annealed duplex stainless steel

The interface character distributions (ICDs) of cold-rolled and annealed duplex stainless steel specimens, previously solid-solution-heated (SHT) at 1573 K and 1323 K, are investigated using electron backscatter diffraction (EBSD) and five-parameter analysis (FPA). For the δ-ferrite phase, high concentrations of low angle grain boundaries (LAGBs) are developed, and the boundary planes are predominantly oriented on (111). High angle grain boundaries (HAGBs) with misorientations ranging from 50{sup o} to 60° are mostly pure tilt boundaries, and the boundary planes are primarily located on (112). For the austenite phase, very high density of coherent twin boundaries are introduced, implying that the boundary planes are exactly oriented on (111). The phase boundary character distribution (PBPD) appears to be connected with the K-S and N-W orientation relationships (ORs) terminating on (110) {sub F}‖(111) {sub A} and (110){sub F}‖(hkl){sub A}, respectively. - Highlights: •Five-parameter analysis was used to determine interface character distribution. •ICD results of statistical meaning were achieved. •Initial microstructure has a significant effect on ICD. •Low and high angle GBs in δ phase prefer in (111) and (112) planes, respectively. •K-S phase boundaries terminate on (110){sub F}‖(111){sub A} while N-W ones on (110){sub F}‖(hkl){sub A}.

36 MATERIALS SCIENCE↗

Phase retarder based on one-dimensional photonic crystals composed of plasma and mu-negative materials

By using transfer matrix method, a systematic study on the properties of the reflection phase shifts and the reflection phase difference between TE and TM waves in a finite one-dimensional (1D) photonic crystal containing plasma and mu-negative materials is presented. It is found that the reflection phase difference between the two polarizations remains constant in a rather wide frequency range for a given incident angle. More specifically, the reflection phase difference increases gradually from 0 to π rad with the increase of the incident angle. That is to say, the finite 1D structure can serve as a broadband phase retarder. It is also evident that the working frequency range of the phase retarder can be adjusted by altering the plasma frequency and the thickness of the plasma layers without changing the structure of the photonic crystal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High accuracy subwavelength distance measurements: A variable-angle standing-wave total-internal-reflection optical microscope

We describe an extension of the total-internal-reflection microscopy technique that permits direct in-plane distance measurements with high accuracy (<10 nm) over a wide range of separations. This high position accuracy arises from the creation of a standing evanescent wave and the ability to sweep the nodal positions (intensity minima of the standing wave) in a controlled manner via both the incident angle and the relative phase of the incoming laser beams. Some control over the vertical resolution is available through the ability to scan the incoming angle and with it the evanescent penetration depth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Presence of Induced Weak Ferromagnetism in Fe-Substituted YFe x Cr 1–x O 3 Crystalline Compounds

Fe-substituted YFe x Cr 1–x O 3 crystalline compounds show promising magnetic and multiferroic properties. Here we report the synthesis and characterization of several compositions from this series. Using the autocombustion route, various compositions (x = 0.25, 0.50, 0.6, 0.75, 0.9, and 1) were synthesized as high-quality crystalline powders. In order to obtain microscopic and atomic information about their structure and magnetism, characterization was performed using room temperature X-ray diffraction and energy dispersion analysis as well as temperature-dependent neutron diffraction, magnetometry, and 57 Fe Mössbauer spectrometry. Rietveld analysis of the diffraction data revealed a crystallite size of 84 (8) nm for YFeO 3 , while energy dispersion analysis indicated compositions close to the nominal compositions. The magnetic results suggested an enhancement of the weak ferromagnetism for the YFeO 3 phase due to two contributions. First, a high magnetocrystalline anisotropy was associated with the crystalline character that favored a unique high canting angle of the antiferromagnetic phase (13°), as indicated by the neutron diffraction analysis. This was also evidenced by the high magnetic hysteresis curves up to 90 kOe by a remarkable high critical coercivity value of 46.7 kOe at room temperature. Second, the Dzyaloshinskii–Moriya interactions between homogenous and heterogeneous magnetic pairs resulted from the inhomogeneous distribution of Fe 3+ and Cr 3+ ions, as indicated by 57 Fe Mössbauer studies. Together, these results point to new methods of controlling the magnetic properties of these materials.

36 MATERIALS SCIENCE↗

An alternative analysis of low- and high-altitude observations of ring current ions during a storm recovery phase

Explorer 45 equatorial observations of ring current ions during a storm recovery phase have shown pitch angle distributions and decay rates inconsistent with proton charge exchange with neutral hydrogen. This inconsistency has led to the suggestion that recovery phase ring current ions at L less than or equal to 4 and energies not greater than 50 keV are dominated by He(+) rather than protons. The absence of He(+) on flux tubes from which H(+) and O(+) were precipitating in ion mass spectrometer measurements made during the same period by the low-altitude polar-orbiting satellite 1971-089A led Sharp et al. to suggest a source of H(+) and O(+) to L = 3 during this period. An alternative explanation, in which the magnetic field lines labeled L = 3 at the earth's surface near local midnight were mapped to about 3.7 earth radii in the equatorial plane during the storm recovery phase and during the period of enhanced activity, is proposed. If the proposed explanation is correct, the observations of Sharp et al. are not incompatible with the conclusion that the recovery phase ions at less than 50 keV were dominated by He(+) for L not greater than 3.7.

Lyons, L. R.↗

The SUrvey for Pulsars and Extragalactic Radio Bursts - IV. Discovery and polarimetry of a 12.1-s radio pulsar

We report the discovery of PSR J2251−3711, a radio pulsar with a spin period of 12.1 s, the second longest currently known. Its timing parameters imply a characteristic age of 15 Myr, a surface magnetic field of 1.3 × 10^(13) G, and a spin-down luminosity of 2.9 × 10^(29) erg/s. Its dispersion measure of 12.12(1) pc/cu. cm leads to distance estimates of 0.5 and 1.3 kpc according to the NE2001 and YMW16 Galactic free electron density models, respectively. Some of its single pulses show an uninterrupted 180-deg sweep of the phase-resolved polarization position angle, with an S-shape reminiscent of the rotating vector model prediction. However, the fact that this sweep occurs at different phases from one pulse to another is remarkable and without straightforward explanation. Although PSR J2251−3711 lies in the region of the P − P˙ parameter space occupied by the X-ray isolated neutron stars (XINS), there is no evidence for an X-ray counterpart in our Swift XRT observation; this places a 99 per cent-confidence upper bound on its unabsorbed bolometric thermal luminosity of 1.1 × 10^(31) (d/1 kpc)^2 erg/s for an assumed temperature of 85 eV, where d is the distance to the pulsar. Further observations are needed to determine whether it is a rotation-powered pulsar with a true age of at least several Myr, or a much younger object such as an XINS or a recently cooled magnetar. Extreme specimens like PSR J2251−3711 help bridge populations in the so-called neutron star zoo in an attempt to understand their origins and evolution.

V Morello↗

SU-F-J-158: Respiratory Motion Resolved, Self-Gated 4D-MRI Using Rotating Cartesian K-Space Sampling

Purpose: Dynamic MRI has been used to quantify respiratory motion of abdominal organs in radiation treatment planning. Many existing 4D-MRI methods based on 2D acquisitions suffer from limited slice resolution and additional stitching artifacts when evaluated in 3D{sup 1}. To address these issues, we developed a 4D-MRI (3D dynamic) technique with true 3D k-space encoding and respiratory motion self-gating. Methods: The 3D k-space was acquired using a Rotating Cartesian K-space (ROCK) pattern, where the Cartesian grid was reordered in a quasi-spiral fashion with each spiral arm rotated using golden angle{sup 2}. Each quasi-spiral arm started with the k-space center-line, which were used as self-gating{sup 3} signal for respiratory motion estimation. The acquired k-space data was then binned into 8 respiratory phases and the golden angle ensures a near-uniform k-space sampling in each phase. Finally, dynamic 3D images were reconstructed using the ESPIRiT technique{sup 4}. 4D-MRI was performed on 6 healthy volunteers, using the following parameters (bSSFP, Fat-Sat, TE/TR=2ms/4ms, matrix size=500×350×120, resolution=1×1×1.2mm, TA=5min, 8 respiratory phases). Supplemental 2D real-time images were acquired in 9 different planes. Dynamic locations of the diaphragm dome and left kidney were measured from both 4D and 2D images. The same protocol was also performed on a MRI-compatible motion phantom where the motion was programmed with different amplitude (10–30mm) and frequency (3–10/min). Results: High resolution 4D-MRI were obtained successfully in 5 minutes. Quantitative motion measurements from 4D-MRI agree with the ones from 2D CINE (<5% error). The 4D images are free of the stitching artifacts and their near-isotropic resolution facilitates 3D visualization and segmentation of abdominal organs such as the liver, kidney and pancreas. Conclusion: Our preliminary studies demonstrated a novel ROCK 4D-MRI technique with true 3D k-space encoding and respiratory motion self-gating. The technique leads to high-resolution and artifacts-free 4D images for improved abdominal organ motion studies. K.S acknowledges funding support from NIH R01CA188300.

60 APPLIED LIFE SCIENCES↗

Fermi surface topology and nontrivial Berry phase in the flat-band semimetal Pd 3 Pb

A study of the Fermi surface of the putative topological semimetal Pd 3 Pb has been carried out using Shubnikov–de Haas (SdH) oscillations measured in fields of up to 60 T. Pd 3 Pb has garnered attention in the community due to a peculiar Fermi surface that has been proposed theoretically by Ahn, Pickett, and Lee, Phys. Rev. B 98 , 035130 (2018) to host a dispersionless band along X - Γ as well as multiple triply degenerate band crossings that, under the influence of spin-orbit coupling, lead to ten fourfold degenerate Dirac points. Analysis of the SdH oscillation data verifies the calculated multisheet Fermi surface, revealing a Γ centered spheroid that had not been resolved experimentally in prior studies. A comprehensive, angle-dependent analysis of the phase of the SdH oscillations convincingly demonstrates a nontrivial Berry phase for two bands along Γ - R , supporting the theoretical predictions, while simultaneously evidencing interference between extremal orbits that mimics a trivial Berry phase at intermediate angles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

All-alumina quarter-wave plate coatings fabricated by glancing angle deposition using serial bideposition

Anisotropic phase retarders, used in high power laser facilities to perform polarization smoothing, can be obtained by the glancing angle deposition (GLAD) coating process. Due to its high laser resistance, the coatings are mainly made of silica. Therefore, limited attention has been given to other dielectric materials. Here we present a study on alumina GLAD anisotropic coatings; a material with high laser resistance, higher birefringence and lower environmental sensitivity than silica. Since the anisotropy is related to the coatings microstructure through the deposition angle, samples were coated at angles varying from ± 68° to ± 82° using the serial bideposition technique. They were characterized by ellipsometry, polarimetry, spectrophotometry and electron microscopy. We showed that the highest birefringence is obtained at a deposition angle of ± 76° with an in-plane value of 0.053. Based on these results, a quarter-wave plate at 351 nm was designed as a multilayer with seven pairs of anisotropic layers deposited at ± 76° and isotropic layers deposited at 0°. The fabricated coating exhibited a uniform retardance of 88.51 ± 0.45 nm. The alumina GLAD wave plates presented here, open the door to new possibilities in the laser field and especially in the field of fusion energy.

36 MATERIALS SCIENCE↗

Dynamics and nonmonotonic drag for individually driven skyrmions

Here, we examine the motion of an individual skyrmion driven through an assembly of other skyrmions in the absence of quenched disorder. The skyrmion behavior is determined by the ratio of the damping and Magnus terms, known as the intrinsic skyrmion Hall angle. For fixed drive in the damping dominated regime, the effective viscosity decreases monotonically with increasing skyrmion density. In contrast, in the Magnus dominated regime, the velocity varies nonmonotonically with density, and there is a regime in which the skyrmion moves faster with increasing density, as well as a pronounced speed-up effect in which a skyrmion traveling through a dense medium moves more rapidly than for low densities or the single-particle limit. The velocity-force curves in the Magnus-dominated regime exhibit an overshoot effect and other differences from the damping-dominated regime. We find a finite threshold force for skyrmion motion which increases with density as well as a drive-dependent skyrmion Hall angle. We map dynamic phase diagrams showing the threshold for motion, nonlinear flow, speed-up, and saturation regimes. In some cases, increasing the density can reduce the skyrmion Hall angle while producing a velocity boost, which could be valuable for applications.

36 MATERIALS SCIENCE↗

Temperature-Controlled Reversible Formation and Phase Transformation of 3D Nanocrystal Superlattices Through In Situ Small-Angle X-ray Scattering

For decades, the spontaneous organization of nanocrystals into superlattices has captivated the scientific community. However, achieving direct control over the formation of the superlattice and its phase transformations has proven to be a grand challenge, often resulting in the generation of multiple symmetries under the same experimental conditions. Here, we achieve direct control over the formation of the superlattice and its phase transformations by modulating the thermal energy of a nanocrystal dispersion without relying on solvent evaporation. In this study, we follow the temperature-dependent dynamics of the self-assembly process using synchrotron-based small-angle X-ray scattering. When cooled below –24.5 °C, lead sulfide nanocrystals form micrometer-sized three-dimensional phase-pure body-centered cubic superlattices. When cooled below –35.1 °C, these superlattices undergo a collective diffusionless phase transformation that yields denser body-centered tetragonal phases. These structural changes can be reversed by increasing the temperature of the dispersion and may lead to the direct modulation of the optical properties of these artificial solids.

36 MATERIALS SCIENCE↗

RELATIVISTIC MODEL ON PULSAR RADIO EMISSION AND POLARIZATION

We have developed a relativistic model for pulsar radio emission and polarization by taking into account a detailed geometry of emission region, rotation, and modulation. The sparks activity on the polar cap leads to plasma columns in the emission region and modulated emission. By considering relativistic plasma bunches streaming out along the rotating dipolar field lines as a source of curvature radiation, we have deduced the polarization state of the radiation field in terms of the Stokes parameters. We have simulated a set of typical pulse profiles and analyzed the role of viewing geometry, rotation, and modulation in the pulsar polarization profiles. Our simulations explain most of the diverse behaviors of polarization generally found in pulsar radio profiles. We show that both the 'antisymmetric' and 'symmetric' types of circular polarization are possible within the framework of curvature radiation. We also show that the 'kinky' nature in the polarization position angle traverses might be due to the rotation and modulation effects. The phase lag of the polarization position angle inflection point relative to the phase of core peak depends upon the rotationally induced asymmetry in the curvature of source trajectory and modulation.

79 ASTRONOMY AND ASTROPHYSICS↗

THE E {sub p}-FLUX CORRELATION IN THE RISING AND DECAYING PHASES OF GAMMA-RAY BURST PULSES: EVIDENCE FOR VIEWING ANGLE EFFECT?

A time-resolved spectral analysis for a sample of 22 intense, broad gamma-ray burst (GRB) pulses from the Compton Gamma Ray Observatory (CGRO)/BATSE GRB sample is presented. We fit the spectra with the Band function and investigate the correlation between the observed flux (F) and the peak energy (E{sub p}) of the {nu}f{sub {nu}} spectrum in the rising and decaying phases of these pulses. Two kinds of E{sub p} evolution trends, i.e., hard-to-soft (two-thirds of the pulses in our sample) and E{sub p}-tracing-F (one-third of the pulses in our sample), are observed in pulses from different GRBs and even from different pulses of the same burst. No dependence of spectral evolution feature on the pulse shape is found. A tight F-E{sub p} positive correlation is observed in the decaying phases, with a power-law index {approx}2.2, which is much shallower than that expected from the curvature effect. In the rising phase, the observed F is either correlated or anti-correlated with E{sub p}, depending on the spectral evolution feature, and the power-law index of the correlation is dramatically different among pulses. More than 80% of the low-energy photon indices in the time-resolved spectra, whose E{sub p}'s are anti-correlated with F during the rising phase, violate the death line of the synchrotron radiation, disfavoring the synchrotron radiation model for these gamma rays. The F-E{sub p} correlation, especially for those GRBs with E{sub p}-tracking-F spectral evolution, may be due to the viewing angle and jet structure effects. In this scenario, the observed F-E{sub p} correlation in the rising phase may be due to the line of sight toward a structured jet (or jetter) moving from off-beam to on-beam, and both the on-beam emission and the delayed photons from high latitude of the GRB fireball contribute to the decaying phase, resulting in a shallower slope of the observed F-E{sub p} correlation than that predicted by the pure curvature effect.

79 ASTRONOMY AND ASTROPHYSICS↗

Universal Magnetic Phases in Twisted Bilayer MoTe 2

Twisted bilayer MoTe 2 (tMoTe 2 ) has emerged as a robust platform for exploring correlated topological phases, yet the evolution of its magnetism and topology with twist angle remains an open question. Here, we systematically map the magnetic phase diagram of tMoTe 2 by using local optical spectroscopy and scanning nanoSQUID-on-tip magnetometry. We identify spontaneous ferromagnetism at filling factors ν = −1 and −3 across twist angles from 2.1° to 3.7°, revealing a universal, twist-angle-insensitive ferromagnetic phase. At 2.1°, we further observe robust ferromagnetism at ν = −5, absent at larger twist angles. Temperature-dependent measurements reveal a contrasting twist-angle dependence of the Curie temperatures between ν = −1 and −3, indicating a distinct interplay between the exchange interactions and bandwidth for the two Chern bands. Despite broken time-reversal symmetry, no topological gap is detected at ν = −3. Furthermore, our results establish a global framework for understanding and controlling magnetic order in tMoTe 2 .

Insulators↗

Stress waves in transversely isotropic media: The homogeneous problem

The homogeneous problem of stress wave propagation in unbounded transversely isotropic media is analyzed. By adopting plane wave solutions, the conditions for the existence of the solution are established in terms of phase velocities and directions of particle displacements. Dispersion relations and group velocities are derived from the phase velocity expressions. The deviation angles (e.g., angles between the normals to the adopted plane waves and the actual directions of their propagation) are numerically determined for a specific fiber-glass epoxy composite. A graphical method is introduced for the construction of the wave surfaces using magnitudes of phase velocities and deviation angles. The results for the case of isotropic media are shown to be contained in the solutions for the transversely isotropic media.

Marques, E. R. C.↗