Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nanostructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Vanadium oxide based nanostructured materials for catalytic oxidative dehydrogenation of propane : effect of heterometallic centers on the catalyst performance.

Catalytic properties of a series of new class of catalysts materials-[Co{sub 3}(H{sub 2}O){sub 12}V{sub 18}O{sub 42} (XO{sub 4})].24H{sub 2}O (VNM-Co), [Fe{sub 3}(H{sub 2}O){sub 12}V{sub 18}O{sub 42}(XO{sub 4})].24H{sub 2}O (VNM-Fe) (X = V, S) and [H{sub 6}Mn{sub 3}(H{sub 2}O){sub 12}V{sub 18}O{sub 42}(VO{sub 4})].30H{sub 2}O for the oxidative dehydrogenation of propane is studied. The open-framework nanostructures in these novel materials consist of three-dimensional arrays of {l_brace}V{sub 18}O{sub 42}(XO{sub 4}){r_brace} (X = V, S) clusters interconnected by {l_brace}-O-M-O-{r_brace} (M = Mn, Fe, Co) linkers. The effect of change in the heterometallic center M (M = Mn, Co, Fe) of the linkers on the catalyst performance was studied. The catalyst material with Co in the linker showed the best performance in terms of propane conversion and selectivity at 350 C. The material containing Fe was most active but least selective and Mn containing catalyst was least active. The catalysts were characterized by Temperature Programmed Reduction (TPR), BET surface area measurement, Diffuse Reflectance Infrared Fourier Transform Spectroscopy, and X-ray Absorption Spectroscopy. TPR results show that all three catalysts are easily reducible and therefore are active at relatively low temperature. In situ X-ray absorption near edge spectroscopy (XANES) and extended X-ray absorption fine structure spectroscopy (EXAFS) studies revealed that the oxidation state of Co(II) remained unchanged up to 425 C (even after pretreatment). The reduction of Co(II) into metallic form starts at 425 C and this process is completed at 600 C.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanostructural Characterization of the Fe{sub 3}O{sub 4}/ZnO Magnetic Nanocomposite as an Application in Medicine

In the present work, we synthesize Fe{sub 3}O{sub 4}/ZnO nanocomposite by sol-gel method using iron nitrate, ethylene glycol, zinc acetate dehydrate, and ammonium carbonate as precursors. Amorphous matrix and crystalline grains were formed in composite as well. The nanostructural properties of the nanocomposite were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), and colloidal stability was checked out by Zeta potential. The biological effects of Fe{sub 3}O{sub 4}/ZnO nanocomposite were investigated by microculture tetrazolium test (MTT) against MCF-7 breast cancer cells as usage in medicine. Crystallite size, lattice strain, and dislocation density of the nanoparticles were estimated with Williamson-Hall method. The obtained results show that the highest death rate of Michigan Cancer Foundation-7 (MCF-7) cancer cells was for Fe{sub 3}O{sub 4}/ZnO nanocomposite with the molar ratio is 1:10 in the lower concentration (49 μ g/ml). Therefore, these nanocomposites due to their small size, colloidal stability, magnetic properties, and nontoxicity can be a good candidate as option in medicine application.

60 APPLIED LIFE SCIENCES↗

Investigation on Physical Properties of Sn-Modified Cubic Cu{sub 2}O Nanostructures

Cubic Cu{sub 2−x} Sn{sub x}O (0 ≤ x ≤ 0.4) nanostructures have been developed with the solvothermal method. X-ray diffraction data analysis confirms the formation of a pristine Cu{sub 2}O phase below x=0.3 Sn{sup 2+} substitution, and SnO-related phases appear in 0.3 substitute sample indicating phase segregation starts at x≥0.3. The magnetization versus applied field (M − H) curves have been determined using a vibrating sample magnetometer at 300 K which reveals that ferromagnetic behavior of synthesized nanomaterials is reliant on the substituent concentration and enhanced gradually with its addition in the material. Photoluminescence spectra show that ferromagnetism originates from the induced magnetic moment in defects created as cation vacancies in the host material. Beside these, the dielectric measurements were performed at various frequencies (20 Hz–1 MHz) and in the temperature range of 100 to 350 K.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhanced absorption of monolayer molybdenum disulfide (MoS{sub 2}) using nanostructures with symmetrical cross resonator in the visible ranges

In order to enhance the absorption of monolayer molybdenum disulfide (MoS{sub 2}), a novel nanostructure with symmetrical cross resonator based on MoS{sub 2} in the visible wavelength ranges has been proposed. At a resonant wavelength of 623 nm, the absorption of monolayer MoS{sub 2} in the absorption structure is as high as 82%, much higher than the bare MoS{sub 2} in the air. The electric field around monolayer MoS{sub 2} is enhanced by the guided mode resonance, thereby enhancing the absorption of monolayer MoS{sub 2} in the structure. The relevant parameters of the proposed structure are adjusted to achieve the tunability of the resonant wavelength in the visible ranges and the high-efficiency absorption of monolayer MoS{sub 2} in the structure, which is of great significance for the applications of MoS{sub 2}-based optoelectronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ultra-sensitive surface plasmon resonance biosensor based on MoS{sub 2}–graphene hybrid nanostructure with silver metal layer

The optical biosensors based on the plasmonic technology are an important research item in the field of biophotonics. The graphene–molybdenum disulfide (MoS{sub 2}) based hybrid structures are very effective in designing and fabricating of the sensitive optical biosensors. In this paper, we propose a nanostructure Ag/MoS{sub 2}/graphene as an optical biosensor with high performance and sensitivity. The proposed configuration for this surface plasmon resonance (SPR) optical biosensor is Kretschmann. Herein, the enhancement of sensitivity for the proposed SPR optical biosensor is investigated in different states. By determining of the numbers of MoS{sub 2} layer and the thickness of the metal layer, we increased the sensitivity of the proposed biosensor. The maximum sensitivity ~ 190°/RIU is achieved. For this ultra-sensitive SPR biosensor with maximum sensitivity, the numbers of MoS{sub 2} and graphene layer is 2 and the resonance wavelength is determined 680 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

FDTD modelling of nanostructured OLEDs: analysis of simulation parameters for accurate radiation patterns

Nanostructures in OLEDs allow to manipulate the radiation pattern and direct light of a specific wavelength into a specific angle in the far field by resonant light outcoupling. We present a theoretical study investigating simulation conditions for accurate radiation patterns employing the FDTD method. Radiation patterns of single dipole emitters placed in a sufficiently large simulation domain are superimposed to model the incoherent emission of a continuous emission layer. The necessary simulation domain size is derived by considering propagation length and field profile of the guided mode of a corresponding unstructured OLED. A 5 nm mesh resolution is determined as a good compromise between accuracy and simulation time. The position of an emitter with respect to the grating has a large influence on the radiation pattern. Nevertheless, we demonstrate for nine different OLED structures that the radiation pattern of a homogeneous emission layer is approximated with an amplitude error of less than 5% by superimposing only four equally spaced dipoles at positions ± (1/8,3/8,5/8,7/8)⋅Λ/2, which avoid points of high symmetry.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanostructured Ni—Cd powders

Nanostructured powders of the Ni—Cd system containing 0–50 mol.% Cd obtained by co-reduction of metal salts from aqueous solutions by hydrazine were studied by X-ray diffraction, optical emission spectroscopy and electron microscopy. The reduction leads to formation of polycrystalline particles of 100–350 nm size, consisting of 10–20 nm crystallites. Phase composition of the powders is substantially different from that predicted by equilibrium on the phase diagram. Instead of a two-phase area consisting of Ni—NiCd intermetallide, other phase states are observed. If the system contains up to 6% Cd, the XRD data indicates the presence of a single-phase solid solution with a face centred cubic (fcc)-structure. The increase in the Cd content to ~40% is accompanied by formation of the NiCd{sub 5} intermetallide phase, along with a solid solution. In the 40–50% Cd content range, the main phases are NiCd{sub 5}, as well as a fcc-phase containing up to 18% Cd and characterized by a strong broadening of the diffraction maxima caused by the presence of 2–3 nm crystallites. Furthermore, the system of such composition contains a previously unknown non-stoichiometric phase based on Ni{sub 3}Cd, having a similar to Cu{sub 3}Au structure. The results serve to clarify compositions of reduction products and the character of the structural-phase transformations of the intermediate hydroxides and metal products during the reduction process. Based on the obtained data, we proposed a formation scheme for the phases that are unconventional for the studied composition region of the Ni-Cd system. It has been concluded that the main factors determining formation of the reduction products are particle nanoscale dimensionality and occurrence of the reduction process far from equilibrium.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanostructured Fe-20Cr-10Ni-2Si Layer Produced by Laser Cladding and Friction Stir Processing

Laser cladding of Fe-20Cr-10Ni-2Si alloy usually faces challenge of metallurgical defects like micropores and interdendritic fragile precipitates. In this paper, the laser cladding combined with friction stir processing (FSP) was applied to deal with this problem and prepare the nanostructured Fe-20Cr-10Ni-2Si alloy layer. The coarse dendritic grains (5 ~ 10 μm) of laser processed Fe-20Cr-10Ni-2Si alloy were broken into nanocrystallines which contain uniformly distributed nanoparticles (5 ~ 400 nm) in the deformation zone by FSP. The gradient microstructure with an average grain size of several nanometers on the top surface to several micrometers in the center part was obtained by FSP. Meanwhile, the grain size in the plastic zone decreases as the rotary speed rises. Grain refinement by FSP results in the increase of microhardness from 323 HV up to 583 HV, decreasing the friction coefficient from 0.42 to 0.35 and thus the wear resistance is improved.

36 MATERIALS SCIENCE↗

Microstructures and Properties of Nanostructured TiN/MoS{sub 2}/Ag Composite Film Prepared by Pulsed Laser Deposition

In this work, the structural and mechanical properties, tribological performance, and lubrication mechanism from room temperature to 900 °C of TiN/MoS{sub 2}/Ag composite films were investigated in detail. Nanostructured TiN/MoS{sub 2}/Ag composite film was obtained by assembling targets using pulsed laser deposition. The incorporation of lubricant layered MoS{sub 2} and soft metal Ag led to degraded mechanical properties, which could contribute to the lower friction coefficients at low temperatures. When the temperature increased to above 500 °C, the generated high-temperature lubricant MoO{sub 3} and silver molybdates played a critical synergetic lubrication effect, which formed a layer of lubricating film and reduced the friction coefficient. Thus, the cooperation of various lubrication phases contributed to improvement of tribological performance and resulted in continuous lubrication from room temperature to 900 °C.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Syntheses and Characterization of Intermetallic Nanostructures Based on Mn

The nanocrystalline powders of Mn50Ni41Sn9 were prepared by ball milling using a PM 200-type RETSCH planetary ball mill. The morphological, microstructural, and structural characterizations of the nanostructured powders were carried out by scanning electron microscope, x-ray diffraction, first using the Williamson–Hall relation for the refinement of the diffraction peak profiles. The high-temperature thermal and magnetic properties of nanocrystalline alloy Mn50Ni41Sn9 were characterized at different temperatures using a vibrating sample magnetometer; differential scanning calorimetry was used to determine the transformation temperature and thermodynamic values in the Mn50Ni41Sn9 alloy.

36 MATERIALS SCIENCE↗

Enhancement of Hot Corrosion Resistance of Modified 9Cr-1Mo Steel Through Surface Nanostructuring and Pre-oxidation

Nanosize grains of ~ 65 nm were developed with large misorientation angles of grain boundaries in surface region of normalized and tempered modified 9Cr-1Mo steel by ultrasonic shot peening (USSP) with hard steel balls of 3 mm diameter. The surface roughness and the depth of nanostructured surface region were found to increase with the duration of USSP from 0.5 to 5 min. Hot corrosion tests were performed for the Un-USSP and the samples USSPed for the durations of 0.25 and 1.5 min and also for the samples subjected to USSP and subsequently pre-oxidation at 600 °C for 4 h. The hot corrosion resistance at 600 °C under 100% NaCl coating was significantly improved by USSP for 1.5 min and subsequent pre-oxidation at 600 °C for 4 h. The results are discussed in terms of the formation of more uniform and effective protective iron–chromium oxide layer on the USSPed surface from the subsequent pre-oxidation treatment, prior to hot corrosion of the specimens under 100% NaCl coating at 600 °C.

36 MATERIALS SCIENCE↗

The crystal structure, orientation relationships and interfaces of the nanoscale oxides in nanostructured ferritic alloys

The capability of nanostructured ferritic alloys (NFAs) to manage high levels of transmutation product helium will help resolve one of the grand challenges to transforming the promise of C-free fusion energy into a reality. NFAs are dispersion strengthened by an ultrahigh density of Y-Ti-O nano-oxides (NOs), which result in both high strength and temperature limits, as well as unique irradiation tolerance. We used aberration-corrected high-resolution transmission electron microscopy to characterize the NOs in four NFA conditions, including following severe deformation and extreme neutron radiation exposure. Fast Fourier Transform analysis of focal series images revealed the NO crystal structure, including the smallest at < 2 nm in diameter, to be Y 2 Ti 2 O 7 pyrochlore in all cases, consistent with both exit wave analysis and scanning transmission Z-contrast imaging of the atomic columns in a larger feature. The faceted NOs exhibit a quasi-epitaxial orientation relationship with the ferrite matrix: [110] YTO ||[100] Fe and [001] YTO ||[010] Fe , forming a 5 × 7 near coincidence site interface. Also, the NOs exhibit size-dependent strains in both the oxide and matrix ferrite phases.

36 MATERIALS SCIENCE↗

On Delamination Toughening of a 14YWT Nanostructured Ferritic Alloy

The FCRD NFA-1 is a high strength, irradiation tolerant nanostructured ferritic alloy (NFA) produced by ball milling argon atomized Fe-14Cr-3W-0.35Ti-0.25Y (wt.%) and FeO powders, followed by hot extrusion at 850 °C, and subsequent annealing and cross-rolling at 1000 °C. The microstructure of the resulting ≈10 mm thick NFA-1 plate is dominated by ultrafine sub-micron pancake shaped grains, and a large population of microcracks lying on planes parallel to the plate faces. Pre-cracked fracture toughness tests in four different orientations (L-T, T-L, L-S and T-S) show stable crack growth by ductile tearing, with peak load K Jc from ≈ 88 to 154 MPa√m at ambient temperature. Stable crack tearing persists down to ≈ -175 °C and is accompanied by extensive delamination due to the propagation of the microcracks. Depending on the specimen orientation, this unusual toughening mechanism is either due to a reduction of crack tip stresses in thin ligaments formed by the delaminations (L-T and T-L), or 90° deflection of cracks initially running normal to the delaminations (L-S and T-S), thereby suppressing cleavage in both cases. Lastly, understanding the fracture processes in NFA-1 is also important to its irradiation tolerance in nuclear service as well as its fabricability in making defect-free components such as thin-walled tubing.

36 MATERIALS SCIENCE↗

Texture evolution and microcracking mechanisms in as-extruded and cross-rolled conditions of a 14YWT nanostructured ferritic alloy

Cr-stabilized nanostructured ferritic alloys (NFAs), dispersion strengthened by an ultra-high density of nanooxides, are attractive candidates for many nuclear energy applications due to their high-temperature strength, in-service stability and remarkable irradiation tolerance. However, typical NFA deformation processing paths lead to crystallographic texturing, formation of brittle microstructures and low toughness orientations, making fabricating components very difficult. In this paper, we characterize the dislocation-mediated deformation mechanisms that lead to the brittle texture component. The as-extruded bar is less brittle than the cross-rolled plate, which contains a large population of pre-existing cleavage microcracks. More generally, deformed ODS/NFAs are most often textured and have anisotropic low toughness orientations, even absent microcracks. However, cross-rolling produces a very high volume fraction of a plate normal {001}<110>-texture component, which constitutes the brittle cleavage system in iron. Finally, microcracks propagate along {001} low angle deformation induced subgrain boundaries in <110> directions after nucleating by the Cottrell mechanism.

36 MATERIALS SCIENCE↗

Electronic states and phonon properties of Ge{sub x}Si{sub 1−x} nanostructures

Ge{sub x}Si{sub 1−x} nanostructures that can be manipulated through size reduction, geometry variation, and alloying, are considered as one of the key developments for next generation technologies, due to their easy processing, unique properties, and compatibility with the existent silicon-based microelectronic industry. In this review, we have thoroughly discussed the major advances in electronic structures and phonon properties of Ge{sub x}Si{sub 1−x} nanocrystals (NCs). Experimental and theoretical characterization related to several main factors, for example, size, composition, strain, temperature, and interface and surface were presented with special emphasis in low-frequency Raman scattering. Current difficulties in explaining the Raman spectra are the assignment of the low-frequency modes because of the complexity of the environment around the NCs, thus different theoretical models are introduced in detail to deal with different properties of Ge{sub x}Si{sub 1−x} alloy NCs including Lamb’s theory, complex-frequency (CF) model, core–shell matrix (CMS) model and spatial coherence effect model. - Highlights: • Major advances in electronic structures and phonon properties of Ge{sub x}Si{sub 1−x} nanocrystals are discussed thoroughly. • Experimental and theoretical characterization related to size, composition, strain, temperature, and interface/surface are elucidated. • Low-frequency Raman spectra are specially described based on spatial coherence effect model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Two-qubit correlations via a periodic plasmonic nanostructure

We theoretically investigate the generation of quantum correlations by using two distant qubits in free space or mediated by a plasmonic nanostructure. We report both entanglement of formation as well as quantum discord and classical correlations. We have found that for proper initial state of the two-qubit system and distance between the two qubits we can produce quantum correlations taking significant value for a relatively large time interval so that it can be useful in quantum information and computation processes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Two-color Laser Desorption of Nanostructured MgO Thin Films

Neutral magnesium atom emission from nanostructured MgO thin films is induced using two-color nanosecond laser excitation. We find that combined visible/UV excitation, for single-color pulse energies below the desorption threshold, induces neutral Mg-atom emission with hyperthermal kinetic energies in the range of 0.1- 0.2 eV. The observed metal atom emission is consistent with a mechanism involving rapid electron transfer to 3-coordinated Mg surface sites. The two-color Mg-atom signal is significant only for parallel laser polarizations and temporally overlapped laser pulses indicating that intermediate excited states are short-lived compared to the 5 nanosecond laser pulse duration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cerium chloride stimulated controlled conversion of B-to-Z DNA in self-assembled nanostructures

DNA adopts different conformation not only because of novel base pairs but also while interacting with inorganic or organic compounds. Self-assembled branched DNA (bDNA) structures or DNA origami that change conformation in response to environmental cues hold great promises in sensing and actuation at the nanoscale. Recently, the B-Z transition in DNA is being explored to design various nanomechanical devices. In this communication we have demonstrated that Cerium chloride binds to the phosphate backbone of self-assembled bDNA structure and induce B-to-Z transition at physiological concentration. The mechanism of controlled conversion from right-handed to left-handed has been assayed by various dye binding studies using CD and fluorescence spectroscopy. Three different bDNA structures have been identified to display B-Z transition. This approach provides a rapid and reversible means to change bDNA conformation, which can be used for dynamic and progressive control at the nanoscale. - Highlights: • Cerium-induced B-to-Z DNA transition in self-assembled nanostructures. • Lower melting temperature of Z-DNA than B-DNA confirmed by CD spectroscopy. • Binding mechanism of cerium chloride is explained using fluorescence spectroscopy. • Right-handed to left-handed DNA conformation is also noticed in modified bDNA structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗