Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mixture modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Analysis of 5 KHz combustion instabilities in 40K methane/LOX combustion chambers

In 40K methane/LOX 5 KHz engine tests, (first transverse mode) combustion instabilities observed by Rocketdyne are analyzed using Heidmann and Wieber's vaporization model to include LOX flow oscillations. The LOX flow oscillations are determined by including acoustic waves in the feed system analysis. The major parameter controlling stability is the distance (or time delay) associated with atomizing the LOX stream in the coaxial injection system. Results of the analysis that show the influence of mixture ratio, oxidizer and fuel injection velocities, burning time and combustion chamber/injector dimensions on stability are used to explain the existing data. Calculated results to predict the influence of design changes being made for the next set of experiments are also presented.

Breisacher, Kevin J.↗

A model for the evaporation of clusters of drops embedded in jet vortices. I - Steady injection of identical clusters

A model is developed for describing the interaction of vortex-drop clusters in a flowing gaseous jet, convecting downstream from an injection location. Results are presented for a stationary case representing the situation when identical clusters are continuously injected and the injection rate is constant. The results indicate that, in a rich mixture high-drop-number density regime, the mass evaporated from the drops controls the velocity of the cluster-in-vortex as it propagates downstream.

Bellan, J.↗

Test System to Study the Ignition of Metals by Polymers in Oxygen

A new test system that uses Laser energy to ignite a polymer promoter has been developed at the NASA White Sands Test Facility. It will facilitate the study of the spread of fire from a burning polymer material to the metal surrounding it. The system can be used to answer questions regarding the effects of configuration on ignition and combustion. The data obtained from this test could also be used to develop mathematical models for analyzing the effects of configuration on ignition and combustion. The system features a 10,000-psi (69-MPa) test chamber with sight glass windows on either end and a 25-watt carbon dioxide Laser for an ignition source. The test system can be used with gaseous oxygen, nitrogen or any mixture of the two gases. To minimize the effect of preheating the metallic, the polymer is ignited with a minimal amount of Laser energy. Igniting the polymer in this fashion also simplifies the thermodynamic analysis of the ignition and propagation reactions. The system is very robust, versatile and straightforward to use. Depending on the test pressure and configuration, the test system operator can perform as many as 20 tests per day. Test results verify that ignition and combustion of the metallic sample is not only dependent on pressure, material type and temperature, but configuration of both the polymer promoter and metallic sample. Both 6061 aluminum and 316 stainless steel 0.25-inch (6.35-mm) diameter rods with a standard 0-ring groove were tested with Buna-N, Silicone, Teflon and Viton 0-rings. The system ignited all four types of 0-rings in oxygen at pressures ranging from ambient to 10,000 psi (69 MPa). However, neither the stainless steel nor the aluminum rods on which the O-rings were mounted ignited in any test conditions. Future testing may be done on the 0.25-inch (6.35-mm) rod and O-ring configuration to evaluate the lack of ignition in these tests. Future configurations may include a plug of polymer in the base of the sample and replicas of fire-damaged components. Furthermore, the test system may be used in the future to analyze the oxidation rate of Laser-heated metals in gaseous oxygen.

Shoffstall, Michael S.↗

A Chlorophyll-a Algorithm for Landsat-8 Based on Mixture Density Networks

Retrieval of aquatic biogeochemical variables, such as the near-surface concentration of chlorophyll-a (Chla) in inland and coastal waters via remote observations, has long been regarded as a challenging task. This manuscript applies Mixture Density Networks (MDN) that use the visible spectral bands available by the Operational Land Imager (OLI) aboard Landsat-8 to estimate Chla. We utilize a database of co-located in situ radiometric and Chla measurements (N = 4,354), referred to as Type A data, to train and test an MDN model (MDN(A)). This algorithm’s performance, having been proven for other satellite missions, is further evaluated against other widely used machine learning models (e.g., support vector machines), as well as other domain-specific solutions (OC3), and shown to offer significant advancements in the field. Our performance assessment using a held-out test data set suggests that a 49% (median) accuracy with near-zero bias can be achieved via the MDN(A) model, offering improvements of 20 to 100% in retrievals with respect to other models. The sensitivity of the MDN(A) model and benchmarking methods to uncertainties from atmospheric correction (AC) methods, is further quantified through a semi-global matchup dataset (N = 3,337), referred to as Type B data. To tackle the increased uncertainties, alternative MDN models (MDN(B)) are developed through various features of the Type B data (e.g., Rayleigh-corrected reflectance spectra ρ(s)). Using held-out data, along with spatial and temporal analyses, we demonstrate that these alternative models show promise in enhancing the retrieval accuracy adversely influenced by the AC process. Results lend support for the adoption of MDN(B) models for regional and potentially global processing of OLI imagery, until a more robust AC method is developed. Index Terms—Chlorophyll-a, coastal water, inland water, Landsat-8, machine learning, ocean color, aquatic remote sensing.

Brandon Smith↗

Mixing models and the recognition of end-member groups in Apollo 11 and 12 soils.

Lunar soils returned from the Apollo 11 and 12 sites appear to consist of more than one source material. Investigators have suggested that the soil can be described by as few as two end members and possibly as many as five or six. In the present study Q-mode factor analysis is used to establish the end members more rigorously and suggests that major-element chemistry of Apollo 11 and 12 lunar soils can be adequately explained in terms of a three-component mixing system. The end members isolated by Q-mode factor analysis can be regarded as basaltic, anorthositic, and noritic (or KREEP) components. Three-component mixing models fitted by least squares to the eight major oxides indicate that six of the Apollo 12 soils investigated are dominated by the basaltic component, whereas the other five are dominated by the noritic or KREEP component. Anorthosite is present in all soils except sample 12033, which is a simple two-component mixture of basalt and KREEP. The Apollo 11 soil is also a three-component mixture but is more basaltic than the Apollo 12 soils. Anorthositic and KREEP materials are important components of the lunar lithosphere and may be distributed on the lunar surface areally in an independent manner.

Lindsay, J. F.↗

Electron spin resonance study of thermal instability reactions in jet fuels

Free radicals were studied by electron spin resonance (ESR) using model compounds that are representative of constituents of jet fuels. Radical formation was initiated with peroxides and hydroperoxides by using UV photolysis at and near room temperature and thermal initiation at higher temperatures. Both oxygen free and air saturated systems were studied. N-Dodecane was frequently used as a solvent, and a mixture of n-dodecyl radicals was made with a peroxide initiator in n-dodecane (free of oxygen) thermally at 212 C and photolytically at room temperature. Hydrogen abstraction from the 3,4,5 and 6-positions gives radicals that are sufficiently alike that their spectra are essentially superimposed. The radical formed by abstract of hydrogen from the 2-position gives a different spectrum. ESR parameters for these radicals were measured. The radical formed by abstraction of a primary hydrogen was not observed. Similar radicals are formed from n-decane. A variety of exploratory experiments were carried out with systems that give free radical spectra to which was added small amounts of 2,5-dimethylpyrrole.

Zeldes, H.↗

Turbulent Simulation of the Dynamics of the Magnetotail

In situ observations indicate that the dynamical processes in the geoplasma environment generally entail localized intermittent processes and anomalous global transports. It was suggested by T. Chang that instead of considering the turbulence as a mixture of interacting waves, such type of patchy intermittency could be more easily understood in terms of the development, interaction, merging, preferential acceleration and evolution of coherent magnetic structures. In this three-year project, we have used direct numerical MHD simulations to study some aspects of the MHD dynamics in Chang's model. Our large-scale numerical calculations and simulations have been supplemented by and coordinated with theoretical studies conducted by Chang and his colleagues.

Wu, Cheng-Chin↗

Isolation of Precursor Cells from Waste Solid Fat Tissue

A process for isolating tissue-specific progenitor cells exploits solid fat tissue obtained as waste from such elective surgical procedures as abdominoplasties (tummy tucks) and breast reductions. Until now, a painful and risky process of aspiration of bone marrow has been used to obtain a limited number of tissue- specific progenitor cells. The present process yields more tissue-specific progenitor cells and involves much less pain and risk for the patient. This process includes separation of fat from skin, mincing of the fat into small pieces, and forcing a fat saline mixture through a sieve. The mixture is then digested with collagenase type I in an incubator. After centrifugation tissue-specific progenitor cells are recovered and placed in a tissue-culture medium in flasks or Petri dishes. The tissue-specific progenitor cells can be used for such purposes as (1) generating three-dimensional tissue equivalent models for studying bone loss and muscle atrophy (among other deficiencies) and, ultimately, (2) generating replacements for tissues lost by the fat donor because of injury or disease.

Byerly, Diane↗

Chemical Reaction and Flow Modeling in Fullerene and Nanotube Production

The development of processes to produce fullerenes and carbon nanotubes has largely been empirical. Fullerenes were first discovered in the soot produced by laser ablation of graphite [1]and then in the soot of electric arc evaporated carbon. Techniques and conditions for producing larger and larger quantities of fullerenes depended mainly on trial and error empirical variations of these processes, with attempts to scale them up by using larger electrodes and targets and higher power. Various concepts of how fullerenes and carbon nanotubes were formed were put forth, but very little was done based on chemical kinetics of the reactions. This was mainly due to the complex mixture of species and complex nature of conditions in the reactors. Temperatures in the reactors varied from several thousand degrees Kelvin down to near room temperature. There are hundreds of species possible, ranging from atomic carbon to large clusters of carbonaceous soot, and metallic catalyst atoms to metal clusters, to complexes of metals and carbon. Most of the chemical kinetics of the reactions and the thermodynamic properties of clusters and complexes have only been approximated. In addition, flow conditions in the reactors are transient or unsteady, and three dimensional, with steep spatial gradients of temperature and species concentrations. All these factors make computational simulations of reactors very complex and challenging. This article addresses the development of the chemical reaction involved in fullerene production and extends this to production of carbon nanotubes by the laser ablation/oven process and by the electric arc evaporation process. In addition, the high-pressure carbon monoxide (HiPco) process is discussed. The article is in several parts. The first one addresses the thermochemical aspects of modeling; and considers the development of chemical rate equations, estimates of reaction rates, and thermodynamic properties where they are available. The second part addresses modeling of the arc process for fullerene and carbon nanotube production using O-D, 1-D and 2-D fluid flow models. The third part addresses simulations of the pulsed laser ablation process using time-dependent techniques in 2-D, and a steady state 2-D simulation of a continuous laser ablation process. The fourth part addresses steady state modeling in O-D and 2-D of the HiPco process. In each of the simulations, there is a variety of simplifications that are made that enable one to concentrate on one aspect or another of the process. There are simplifications that can be made to the chemical reaction models , e.g. reduction in number of species by lumping some of them together in a representative species. Other simulations are carried out by eliminating the chemistry altogether in order to concentrate on the fluid dynamics. When solving problems with a large number of species in more than one spatial dimension, it is almost imperative that the problem be decoupled by solving for the fluid dynamics to find the fluid motion and temperature history of "particles" of fluid moving through a reactor. Then one can solve the chemical rate equations with complex chemistry following the temperature and pressure history. One difficulty is that often mixing with an ambient gas is involved. Therefore, one needs to take dilution and mixing into account. This changes the ratio of carbon species to background gas. Commercially available codes may have no provision for including dilution as part of the input. One must the write special solvers for including dilution in decoupled problems. The article addresses both ful1erene production and single-walled carbon nanotube (SWNT) production. There are at least two schemes or concepts of SWNT growth. This article will only address growth in the gas phase by carbon and catalyst cluster growth and SW T formation by the addition of carbon. There are other models that conceive of SWNT growth as a phase separation process from clusters me up carbon and metal catalyst, with the carbon precipitating from the cluster as it cools. We will not deal with that concept in this article. Further research is needed to determine the rates at which these composite clusters form, evaporate, and segregate.

Scott, Carl D.↗

Measurements of recombination of electrons with HCO(plus) ions

Recombination coefficients of electrons with HCO(+) ions were determined with a microwave afterglow/mass spectrometer apparatus. Afterglow measurements of electron density decays in neon-hydrogen-carbon monoxide mixtures are correlated with the decay of mass-identified ion currents to the wall of the microwave cavity. At the appropriate partial pressures of hydrogen and carbon monoxide in the mixture, the ion HCO(+) dominates the ion composition and its wall current approximately tracks the electron density decay curve. From recombination controlled electron density decay curves, the values alpha (HCO(+)) = (3.3 + or - 0.5) and (2.0 + or - 0.3) 0.0000001 cu cm/sec are obtained at 205 and 300 K, respectively. The implications of these results for models of polyatomic molecule formation in dense interstellar clouds are briefly discussed.

Leu, M. T.↗

Prediction of explosive yield and other characteristics of liquid rocket propellant explosions

Work which has been done at the University of Florida in arriving at credible explosive yield values for liquid rocket propellants is presented. The results are based upon logical methods which have been well worked out theoretically and verified through experimental procedures. Three independent methods to predict explosive yield values for liquid rocket propellants are described. All three give the same end result even though they utilize different parameters and procedures. They are: (1) mathematical model; (2) seven chart approach; and (3) critical mass method. A brief description of the methods, how they were derived, how they were applied, and the results which they produced are given. The experimental work used to support and verify the above methods both in the laboratory and in the field with actually explosive mixtures are presented. The methods developed are used and their value demonstrated in analyzing real problems, among them the destruct system of the Saturn 5, and the early configurations of the space shuttle.

Farber, E. A.↗

Kinetics of the reaction of nitric oxide with hydrogen

The reaction of nitric oxide with hydrogen has been studied in the temperature range 2400-4500 K using a shock-tube technique. Mixtures of NO and H2 diluted in argon or krypton were heated by incident shock waves, and the infrared emission from the fundamental vibration-rotation band of NO at 5.3 microns was used to monitor the time-varying NO concentration. The decomposition of nitric oxide behind the shock was found to be modeled well by a fifteen-reaction system. A principal result of the study was the determination of the rate constant k1 for the reaction H + NO yields N + OH, which may be the rate-limiting step for NO removal in some combustion systems. Experimental values of k1 were obtained for each test through comparisons of measured and numerically predicted NO profiles. The data are fit closely by the expression k1 = 1.34 times 10 to the fourteenth power exp(-49 200/RT) cu cm/mole-sec. These data appear to be the first available for this rate constant.

Flower, W. L.↗

Interface reaction and characterization in B/Al composites

Interfacial reactions, strength degradation, and fracture morphology have been characterized in B/Al(1100) and B/Al(6061) composite systems at a volume fraction of 0.55. Reaction was promoted by isothermal exposure at 350 C or 500 C for times up to 860,000 s. Tetragonal AlB12 was identified as the reaction product in the 6061 matrix and hexagonal AlB2 in the 1100 matrix. Interface development is analyzed based on a moving boundary model modified by the addition of ternary elements. While strength decreases in both systems, the time dependence of elevated-temperature exposure is different in the two matrix materials. In the 45 deg fiber orientation, failure occurs primarily by matrix shear, whereas in the 90 deg fiber orientation, fracture morphology is characterized by a mixture of fiber splitting, ductile matrix fracture, and failure at fiber-matrix interfaces.

Kim, W. H.↗

Quantitative analysis of planetary reflectance spectra with principal components analysis

A technique is presented for quantitative analysis of planetary reflectance spectra as mixtures of particles on microscopic and macroscopic scales using principal components analysis. This technique allows for determination of the endmembers being mixed, their abundance, and the scale of mixing, as well as other physical parameters. Eighteen lunar telescopic reflectance spectra of the Copernicus crater region, from 600 nm to 1800 nm in wavelength, are modeled in terms of five likely endmembers: mare basalt, mature mare soil, anorthosite, mature highland soil, and clinopyroxene. These endmembers were chosen from a similar analysis of 92 lunar soil and rock samples. The models fit the data to within 2 percent rms. It is found that the goodness of fit is marginally better for intimate mixing over macroscopic mixing.

Johnson, P. E.↗

Absorption features in the 3 micron spectra of highly obscured objects

Using the IRTF cooled-grating spectrometer moderate resolution 2.4 to 3.8 micron spectra of a selection of IR protostars and one object located behind the Taurus dark cloud were obtained. Two examples of the spectra are presented. It is clear that the absorption near 3.07 micron is dominated by H2O ice and a comparison between the spectra and a simple H2O ice model allows a temperature estimate for the hottest ice-coated grains in these sources. Higher resolution observations showed no indication of the absorption due to the N-H stretching vibration of NH3 near 2.963 micron. The most plausible explanation for the 3.3 and 3.45 micron features appears to be absorption by the mixture of hydrocarbons, although they cannot be identified with features already attributed to hydrocarbons in the ISM, reflection nebulae and Comets. However these features appear the same for all sources in the sample, including Elias 16, thus implying a very similar mixture of molecules in each source.

Smith, Robert G.↗

Detonability of hydrocarbon fuels in air

Studies were conducted of the detonation of gas-phase mixtures of n-hexane and JP-4, with oxidizers as varied as air and pure oxygen, measuring detonation velocities and cell sizes as a function of stoichiometry and diluent concentration. The induction length of a one-dimensional Zeldovich-von Neumann-Doering detonation was calculated on the basis of a theoretical model that employed the reaction kinetics of the hydrocarbon fuels used. Critical energy and critical tube diameter are compared for a relative measure of the heavy hydrocarbon fuels studied; detonation sensitivity appears to increase slightly with increasing carbon number.

Beeson, H. D.↗

Association of American Geographers, Remote Sensing Specialty Group Special Issue of Geocarto International

This special issue continues the precedence of the Association of American Geographers (AAG), Remote Sensing Specialty Group (RSSG) for publishing selected articles in Geocarto International as a by-product from the AAG annual meeting. As editors, we issued earlier this year, a solicitation for papers to be published in a special issue of Geocarto International that were presented in RSSG-sponsored sessions at the 2001 AAG annual meeting held in New York City on February 27-March 3. Although not an absolute requisite for publication, the vast majority of the papers in this special issue were presented at this year's AAG meeting in New York. Other articles in this issue that were not part of a paper or poster session at the 2001 AAG meeting are authored by RSSG members. Under the auspices of the RSSG, this special Geocarto International issue provides even more compelling evidence of the inextricable linkage between remote sensing and geography. The papers in this special issue fall into four general themes: 1) Urban Analysis and Techniques for Urban Analysis; 2) Land Use/Land Cover Analysis; 3) Fire Modeling Assessment; and 4) Techniques. The first four papers herein are concerned with the use of remote sensing for analysis of urban areas, and with use or development of techniques to better characterize urban areas using remote sensing data. As the lead paper in this grouping, Rashed et al., examine the usage of spectral mixture analysis (SMA) for analyzing satellite imagery of urban areas as opposed to more 'standard' methods of classification. Here SMA has been applied to IRS-1C satellite multispectral imagery to extract measures that better describe the 'anatomy' of the greater Cairo, Egypt region. Following this paper, Weng and Lo describe how Landsat TM data have been used to monitor land cover types and to estimate biomass parameters within an urban environment. The research reported in this paper applies an integrated GIS (Geographic Information System) approach for detecting urban growth and assessing its impact on biomass in the Zhujiang Delta, China. The remaining two papers in this first grouping deal with improved techniques for characterizing and analyzing urban areas using remote sensing data. Myint examines the use of texture analysis to better classify urban features. Here wavelet analysis has been employed to assist in deriving a more robust classification of the urban environment from high spatial resolution, multispectral aircraft data. Mesev provides insight on how through the modification of the standard maximum likelihood image analysis technique, population census data can be used enhance the overall robustness of urban image classification through the modification of the standard maximum likelihood image analysis technique.

Allen, Thomas R.↗

Prediction of electron density in the boundary layer on entry vehicles with ablation

A rather general computer code has been developed for the numerical solution of the laminar boundary layer and thin shock layer (stagnation point only) equations for a multi-component gas mixture with finite reaction rates. The purpose of this paper is to indicate the capabilities of this computer program by presenting solutions for pure air flows and flows with carbon ablation. At the body surface the effects of oxidation and sublimation of carbon are taken into account with the following species included in the gas model: 0 2 , N 2 , O, N, NO, NO + , C 1 , C 2 , C 3 , CN, CO, and CO 2 . Results for the boundary layer along a 10° half-angle hyperboloid with ablation of carbon are compared to pure air results. Shock layer results for several wall temperatures and altitudes are presented and compared to pure air results. Other types of problems that can be solved with this computer code are indicated.

F. G. Blottner↗