Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Maxwell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Advanced electrode processing for lithium-ion battery manufacturing

Lithium-ion batteries (LIBs) need to be manufactured at speed and scale for their use in electric vehicles and devices. However, LIB electrode manufacturing via conventional wet slurry processing is energy-intensive and costly, challenging the goal to achieve sustainable, affordable and facile manufacturing of high-performance LIBs. Here, in this Review, we discuss advanced electrode processing routes (dry processing, radiation curing processing, advanced wet processing and 3D-printing processing) that could reduce energy usage and material waste. Maxwell-type dry processing is a scalable alternative to conventional processing and has relatively low manufacturing cost and energy consumption. Radiation curing processing could enable high-throughput manufacturing, but binder selection is limited to certain radiation curable chemistries. 3D-printing processing can produce electrodes with diverse architectures and improved rate performance, but scalability is yet to be demonstrated. 3D-printing processing is good for special applications where throughput and cost can be compromised for performance.

25 ENERGY STORAGE↗

Thermal Expansion Anomaly Regulated by Entropy

Thermal expansion, defined as the temperature dependence of volume under constant pressure, is a common phenomenon in nature and originates from anharmonic lattice dynamics. However, it has been poorly understood how thermal expansion can show anomalies such as colossal positive, zero, or negative thermal expansion (CPTE, ZTE, or NTE), especially in quantitative terms. Here we show that changes in configurational entropy due to metastable micro(scopic)states can lead to quantitative prediction of these anomalies. We integrate the Maxwell relation, statistic mechanics and first-principles calculations to demonstrate that when the entropy is increased by pressure, NTE occurs such as in Invar alloy (Fe3Pt, for example), silicon, ice and water and when the entropy is decreased dramatically by pressure, CPTE is expected such as in anti-Invar cerium, ice and water. Our findings provide a theoretic framework to understand and predict a broad range of anomalies in nature in addition to thermal expansion, which may include gigantic electrocaloric and electromechanical responses, anomalously reduced thermal conductivity and spin distributions.

Science & Technology - Other Topics↗

Increased Thermal Conductivity in Metal-Organic Heat Carrier Nanofluids

Metal organic heat carriers (MOHCs) are recently developed nanofluids containing metal organic framework (MOF) nanoparticles dispersed in various base fluids including refrigerants (R245Fa) and methanol. MOHCs utilize the MOF properties to improve the thermo-physical properties of base fluids. Here, we report the synthesis and characterization of MOHCs containing nanoMIL-101(Cr) and graphene oxide (GO) in an effort to improve the thermo-physical properties of various base fluids. MOHC containing MIL-101(Cr)/GO nanocomposites showed enhanced surface area, porosity, and nitrogen adsorption compared with the intrinsic nano MIL-101(Cr) and the properties depend on the amount of GO added. Powder X-ray diffraction (PXRD) confirmed the preserved crystallinity of MIL-101(Cr) in all nanocomposites with the absence of any unreacted GO. Scanning electron microscopy images confirmed the presence of near spherical MIL-101(Cr) nanoparticles in the range of 40-80 nm in diameter. MOHC nanofluids containing MIL-101(Cr)/GO in methanol exhibited significant enhancement in the thermal conductivity (by approxi-mately 50%) relative to that of the intrinsic nano MIL-101(Cr) in methanol. The thermal conductivity of base fluid (methanol) was enhanced by about 20 %. The enhancement in the thermal conductivity of nanoMIL-101(Cr) MOHCs due to graphene oxide functionalization is explained using a classical Maxwell model.

Environmental Molecular Sciences Laboratory↗

Light-trapping and recycling for extraordinary power conversion in ultra-thin gallium-arsenide solar cells

Here, we demonstrate nearly 30% power conversion efficiency in ultra-thin (~200 nm) gallium arsenide photonic crystal solar cells by numerical solution of the coupled electromagnetic Maxwell and semiconductor drift-diffusion equations. Our architecture enables wave-interference-induced solar light trapping in the wavelength range from 300-865 nm, leading to absorption of almost 90% of incoming sunlight. Our optimized design for 200 nm equivalent bulk thickness of GaAs, is a square-lattice, slanted conical-pore photonic crystal (lattice constant 550 nm, pore diameter 600 nm, and pore depth 290 nm), passivated with AlGaAs, deposited on a silver back-reflector, with ITO upper contact and encapsulated with SiO 2 . Our model includes both radiative and non-radiative recombination of photo-generated charge carriers. When all light from radiative recombination is assumed to escape the structure, a maximum achievable photocurrent density (MAPD) of 27.6 mA/cm 2 is obtained from normally incident AM 1.5 sunlight. For a surface non-radiative recombination velocity of 10 3 cm/s, this corresponds to a solar power conversion efficiency of 28.3%. When all light from radiative recombination is trapped and reabsorbed (complete photon recycling) the power conversion efficiency increases to 29%. If the surface recombination velocity is reduced to 10 cm/sec, photon recycling is much more effective and the power conversion efficiency reaches 30.6%.

14 SOLAR ENERGY↗

Molecular beam scattering of ammonia from a dodecane flat liquid jet

The evaporation and scattering of ND 3 from a dodecane flat liquid jet are investigated and the results are compared with previous studies on molecular beam scattering from liquid surfaces. Evaporation is well-described by a Maxwell–Boltzmann flux distribution with a cos θ angular distribution at the liquid temperature. Scattering experiments at E i = 28.8 kJ mol -1 over a range of deflection angles show evidence for impulsive scattering and thermal desorption. Further, at a deflection angle of 90°, the thermal desorption fraction is 0.49, which is higher than that of other molecules previously scattered from dodecane and consistent with work performed on NH 3 scattering from a squalane-wetted wheel. ND 3 scattering from dodecane results in super-specular scattering, as seen in previous experiments on dodecane. The impulsive scattering channel is fitted to a “soft-sphere” model, yielding an effective surface mass of 55 amu and an internal excitation of 5.08 kJ mol -1 . Overall, impulsively scattered ND 3 behaves similarly to other small molecules scattered from dodecane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational general relativistic force-free electrodynamics: II. Characterization of numerical diffusivity

Scientific codes are an indispensable link between theory and experiment; in (astro-)plasma physics, such numerical tools are one window into the universe’s most extreme flows of energy. The discretization of Maxwell’s equations – needed to make highly magnetized (astro)physical plasma amenable to its numerical modeling – introduces numerical diffusion. It acts as a source of dissipation independent of the system’s physical constituents. Understanding the numerical diffusion of scientific codes is the key to classifying their reliability. It gives specific limits in which the results of numerical experiments are physical. We aim at quantifying and characterizing the numerical diffusion properties of our recently developed numerical tool for the simulation of general relativistic force-free electrodynamics by calibrating and comparing it with other strategies found in the literature. Our code correctly models smooth waves of highly magnetized plasma. We evaluate the limits of general relativistic force-free electrodynamics in the context of current sheets and tearing mode instabilities. We identify that the current parallel to the magnetic field (j ∥ ), in combination with the breakdown of general relativistic force-free electrodynamics across current sheets, impairs the physical modeling of resistive instabilities. We find that at least eight numerical cells per characteristic size of interest (e.g., the wavelength in plasma waves or the transverse width of a current sheet) are needed to find consistency between resistivity of numerical and of physical origins. High-order discretization of the force-free current allows us to provide almost ideal orders of convergence for (smooth) plasma wave dynamics. The physical modeling of resistive layers requires suitable current prescriptions or a sub-grid modeling for the evolution of j ∥ .

79 ASTRONOMY AND ASTROPHYSICS↗

Analytic theory of L{yields}H transition, barrier structure, and hysteresis for a simple model of coupled particle and heat fluxes

The two-field (pressure/density) model for the L{yields}H transition is extended and analyzed qualitatively. In its original form the model is ambiguous as to the location of the transition within the range of bistability of particle and thermal fluxes. Here, the model is regularized by including (i) hyperdiffusion, (ii) time dependence, and (iii) curvature of the pressure profile. The regularizations (i)-(ii) agree and indicate that the Maxwell rule for the forward and back transition applies, as opposed to the maximum flux forward and minimum flux backward transition rules (which yields hysteresis) as suggested previously. Regarding (i)-(ii), simple models suggest that for a pressure gradient driven electric field shear bifurcation, the basic scale of the pedestal is inexorably tied to the particle fueling depth, which normally is the neutral penetration depth. There is no hysteresis predicted by the local model of transport suppression. However, the effect of pressure profile curvature (iii) changes these results substantially. When it dominates, the curvature effect reduces the transition threshold to the lower end of the range of heating power, which falls within the phase coexistence region for both forward and back transitions. This softens the transition threshold requirements. In this limit, the model with pressure curvature also predicts transitions which occur in regimes of flat density and driven exclusively by the temperature gradient. This allows the pedestal to extend beyond the fueling depth, and also allows some decoupling of density and pressure profiles. In a parameter range where the pressure curvature is less important the transition occurs somewhere between the above two limits.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Geodesic acoustic modes excited by finite beta drift waves

Presented in this paper is a mode-coupling analysis for the nonlinear excitation of the geodesic acoustic modes (GAMs) in tokamak plasmas by finite beta drift waves. The finite beta effects give rise to a strong stabilizing influence on the parametric excitation process. The dominant finite beta effect is the combination of the Maxwell stress, which has a tendency to cancel the primary drive from the Reynolds stress, and the finite beta modification of the drift waves. The zonal magnetic field is also excited at the GAM frequency. However, it does not contribute to the overall stability of the three-wave process for parameters of relevance to the edge region of tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Determining electron temperature for small spherical probes from network analyzer measurements of complex impedance

In earlier work, using a network analyzer, it was shown that collisionless resistance (CR) exists in the sheath of a spherical probe when driven by a small rf signal. The CR is inversely proportional to the plasma density gradient at the location where the applied angular frequency equals the plasma frequency {omega}{sub pe}. Recently, efforts have concentrated on a study of the low-to-intermediate frequency response of the probe to the rf signal. At sufficiently low frequencies, the CR is beyond cutoff, i.e., below the plasma frequency at the surface of the probe. Since the electron density at the probe surface decreases as a function of applied (negative) bias, the CR will extend to lower frequencies as the magnitude of negative bias increases. Therefore to eliminate both CR and ion current contributions, the frequencies presently being considered are much greater than the ion plasma frequency, {omega}{sub pi}, but less than the plasma frequency, {omega}{sub pe}(r{sub 0}), where r{sub 0} is the probe radius. It is shown that, in this frequency regime, the complex impedance measurements made with a network analyzer can be used to determine electron temperature. An overview of the theory is presented along with comparisons to data sets made using three stainless steel spherical probes of different sizes in different experimental environments and different plasma parameter regimes. The temperature measurements made by this method are compared to those made by conventional Langmuir probe sweeps; the method shown here requires no curve fitting as is the usual procedure with Langmuir probes when a Maxwell-Boltzmann electron distribution is assumed. The new method requires, however, a solution of the Poisson equation to determine the approximate sheath dimensions and integrals to determine approximate plasma and sheath inductances. The solution relies on the calculation of impedance for a spherical probe immersed in a collisionless plasma and is based on a simple circuit analogy for the plasma. Finally, the temperatures obtained using this method show reasonable agreement with those obtained using a conventional Langmuir sweep analysis of the spheres.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Axi-symmetric Gravitational MHD Equilibria in the Presence of Plasma Rotation

In this paper, extending the investigation developed in an earlier paper (Cremaschini et al., 2008), we pose the problem of the kinetic description of gravitational Hall-MHD equilibria which may arise in accretion disks (AD) plasmas close to compact objects. When intense EM and gravitational fields, generated by the central object, are present, a convenient approach can be achieved in the context of the Vlasov-Maxwell description. In this paper the investigation is focused primarily on the following two aspects:1) the formulation of the kinetic treatment of G-Hall-MHD equilibria. Based on the identification of the relevant first integrals of motion, we show that an explicit representation can be given for the equilibrium kinetic distribution function. For each species this is represented as a superposition of suitable generalized Maxwellian distributions;2) the determination of the constraints to be placed on the fluid fields for the existence of the kinetic equilibria. In particular, this permits a unique determination of the functional form of the species number densities and of the fluid partial pressures, in terms of suitably prescribed flux functions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Kinetic ion effect on geodesic acoustic Alfven modes in tokamaks

Using a quasitoroidal set of coordinates with coaxial circular magnetic surfaces, the Vlasov equation is solved for collisionless plasmas, and the dielectric tensor is found for large aspect ratio tokamaks in a low frequency band. Taking into account q-profile and charge separation parallel electric field, it is found that the Alfven wave continuum is deformed by ion geodesic effects producing continuum minimum at the rational magnetic surfaces. Low frequency geodesic ion induced Alfven waves are found below the continuum minimum where collisionless damping has a gap for Maxwell distribution. In kinetic approach, the ion thermal motion defines the geodesic effect but the mode frequency is strongly corrected due to parallel motion of electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of ion suprathermality on arbitrary amplitude dust acoustic waves in a charge varying dusty plasma

Arbitrary amplitude dust acoustic waves in a high energy-tail ion distribution are investigated. The effects of charge variation and ion suprathermality on the large amplitude dust acoustic (DA) soliton are then considered. The correct suprathermal ion charging current is rederived based on the orbit motion limited approach. In the adiabatic case, the variable dust charge is expressed in terms of the Lambert function and we take advantage of this transcendental function to show the existence of rarefactive variable charge DA solitons involving cusped density humps. The dust charge variation leads to an additional enlargement of the DA soliton, which is less pronounced as the ions evolve far away from Maxwell-Boltzmann distribution. In the nonadiabatic case, the dust charge fluctuation may provide an alternate physical mechanism causing anomalous dissipation the strength of which becomes important and may prevail over that of dispersion as the ion spectral index {kappa} increases. Our results may provide an explanation for the strong spiky waveforms observed in auroral electric field measurements by Ergun et al.[Geophys. Res. Lett. 25, 2025 (1998)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Arbitrary amplitude ion-acoustic solitary excitations in the presence of excess superthermal electrons

Velocity distribution functions with an excess of superthermal particles are commonly observed in space plasmas, and are effectively modeled by a kappa distribution. They are also found in some laboratory experiments. In this paper we obtain existence conditions for and some characteristics of ion-acoustic solitary waves in a plasma composed of cold ions and {kappa}-distributed electrons, where {kappa}>3/2 represents the spectral index. As is the case for the usual Maxwell-Boltzmann electrons, only positive potential solitons are found, and, as expected, in the limit of large {kappa} one recovers the usual range of possible soliton Mach numbers, viz., 1<M<1.58. For lower values of {kappa}, modeling the presence of a greater superthermal component, the range of accessible Mach numbers is reduced. It is found that the amplitude of the largest possible solitons that may be generated in a given plasma (corresponding to the highest allowed Mach number for the given plasma composition) falls off with decreasing {kappa}, i.e., an increasing superthermal component. On the other hand, at fixed Mach number, both soliton amplitude and profile steepness increase as {kappa} is decreased. These changes are seen to be important particularly for {kappa}<4, i.e., when the electrons have a 'hard' spectrum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evolution of the bounded magnetized jet and comparison with Helimak experiments

Magnetized jets are important features of many systems of physical interest. To date, most interest has focused on solar and space physics and astrophysical applications, and hence the unbounded magnetized jet, and its cousin, the unbounded magnetized wake, have received the most attention. This work presents calculations of a bounded, magnetized jet for a laboratory experiments in the Helimak device [K. W. Gentle and H. He, Plasma Sci. Technol. 10, 284 (2008)]. The Helimak device has a toroidal magnetic field with a controlled velocity flow that represents jets in bounded systems. Experimental and theoretical features include three spatial dimensions, the inclusion of resistivity and viscosity, and the presence of no-slip walls. The results of the linearized model are computed with a Chebyshev-{tau} algorithm. The bounding walls stabilize the ideal varicose mode found in unbounded magnetized jets. The ideal sinuous mode persists in the bounded system. A comparison theorem is proved showing that two-dimensional modes are more unstable than the corresponding three-dimensional modes for any given set of system parameters. This result is a generalization of the hydrodynamic Squires theorem. An energy-stress theorem indicates that the Maxwell stress is crucial for the growth of the instability. The results of the analysis are consistent with the observed plasma fluctuations with in the limits of using a simple model for the more complex measured jet velocity flow profile. The working gas is singly ionized argon and the jet velocity profile is accurately measured with Doppler shift spectroscopy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The retarded van der Waals potential: Revisited

The retarded van der Waals potential, as first obtained by Casimir and Polder, is usually computed on the basis of nonrelativistic quantum electrodynamics . The Hamiltonian describes two infinitely heavy nuclei, charge e, separated by a distance R and two spinless electrons, charge -e, nonrelativistically coupled to the quantized radiation field. Casimir and Polder used the dipole approximation and small coupling to the Maxwell field. We employ here the full Hamiltonian and determine the asymptotic strength of the leading -R{sup -7} potential, which is valid for all e. Our computation is based on a path integral representation and expands in 1/R, rather than in e.

97 MATHEMATICS AND COMPUTING↗

Nonequilibrium Nonideal Nanoplasma Generated by a Fast Single Ion in Condensed Matter

A plasma model of relaxation of a medium in heavy ion tracks in condensed matter is proposed. The model is based on three assumptions: the Maxwell distribution of plasma electrons, localization of plasma inside the track nanochannel and constant values of the plasma electron density and temperature during the X-ray irradiation. It is demonstrated that the plasma relaxation model adequately describes the X-ray spectra observed upon interaction of a fast ion with condensed target. Preassumptions of plasma relaxation model are validated by the molecular dynamics modeling and simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of the electron energy distribution function in plasma on the Bohm criterion and on the drop voltage through the sheath: Case of microwave expanding plasma

This work is devoted to the study of the sheath expansion above a charged species collector immersed into the plasma in the general case of the electron energy distribution function (EEDF) (not necessarily a Boltzmann distributed function). In the first part, considering the general form of the electron kinetic energy distribution function (EEDF) in the plasma and assuming a one dimensional system, we propose an equation describing the limit value of the ion velocity at the sheath edge. Then, we extend this equation to the three dimensional problem. These results are discussed assuming Boltzmann distribution for the one dimensional system and Maxwell-Boltzmann distribution in the case of the three dimensional system. Both one and two temperature distributions are considered. Then, the method is applied to experimental results obtained in expanding microwave discharge sustained in argon. In the second part, we study the drop voltage through the sheath that is produced around a cylindrical collector biased at the floating potential. A theoretical model is given, and results are compared with experimental values measured by means of a cylindrical Langmuir probe immersed in microwave expanding plasma. The model agrees with experiments and points out the role of the EEDF profile on the ion velocity at the sheath edge and, consequently, on the drop voltage through the sheath.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗