Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mass Efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Hydrodynamics of countercurrent flow in an additive-manufactured column with triply periodic minimal surfaces for carbon dioxide capture

Computational investigation of the countercurrent flows in an additively manufactured (AM) column packed with triply periodic minimal surface (TPMS) is challenging. Multiphase flow simulations using the volume of fluid (VOF) method can explain the column’s hydrodynamic characteristics, including interfacial area, liquid holdup, pressure drop, flow regime, etc. The interfacial area is a key factor dictating the mass transfer via the absorption process, and thereby the overall efficiency of the column. The impacts of a solvent's physical properties, liquid and gas loads, and contact angle on the hydrodynamics are extensively explored. The solvents include traditional solvent (monoethanolamine [MEA]) used in industry as well as a water-lean solvent (EEMPA) as prospective solvents for carbon capture. As expected, interfacial area and liquid holdup increase with increasing liquid loads (q L ). The EEMPA exhibits higher values for the interfacial area and liquid holdup compared to those for the MEA. The dry and wet pressure drops per unit length in the column at different gas loads (F G ) are calculated and further compared with the empirical correlations for traditional packings. At low gas loads, i.e., in the preloading regime, the predicted values of the wet and dry pressure drops match well with the corresponding values calculated from available correlations. The gas load has a marginal impact on the interfacial area at its lower value, but the higher value of F G (>2.18 $\sqrt{Pa}$) causes flooding in the column. The effect of varying contact angles on the interfacial area and liquid holdup in the preloading regime is also studied. Both interfacial area and liquid holdup decrease with the increase in the value of the contact angle. Altogether, the effect of the contact angle on interfacial area is more pronounced than other parameters influencing the interfacial area.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Comparison of atomized mass and crater volume in laser ablation

The extent and dynamics of laser ablation are typically studied using crater imaging or by invoking the relationship between atomic emission and the mass removed. The former is a static view of a dynamic process and requires the accumulation of multiple shots in one location. The latter is complex and not absolute without calibration of the optical system with a standard of spectral radiance. We measure the mass of the atomized plume by laser atomic-absorption spectroscopy at 2 µs without external mass calibration; mass uncertainty in laser-ablation atomic absorption spectroscopy (LA-AAS) results from uncertainties in line area fitting, tabulated oscillator strengths, and partition functions as well as a <10% underrepresentation of the mass due to treating the plasma as a single thermodynamic equilibrium. The LA-AAS-measured mass pertains to the atoms in the probed charge states and does not include condensed or molecular species. The ablation efficiency at 300 mbar of helium varies significantly between the two focusing conditions used. A comparison of crater-derived masses and LA-AAS masses suggests that more defocused ablation may result in significant redeposition of material in the crater, distorting the conclusions from drilling studies and crater imaging. More focused ablation conditions result in crater-derived masses that exceed those measured with LA-AAS and suggest melt expulsion or phase explosion.

Merten, Jonathan [Arkansas State University, Jones↗
DOE OSTI2022

A combined theoretical and experimental study of small anthracene–water clusters

Water-cluster interactions with polycyclic aromatic hydrocarbons (PAHs) are of paramount interest in many chemical and biological processes. Here we report a study of anthracene monomers and dimers with water (up to four)-cluster systems utilizing molecular beam vacuum-UV photoionization mass spectrometry and density functional calculations. Structural loss in photoionization efficiency curves when adding water indicates that various isomers are generated, while theory indicates only a slight shift in energy in photoionization states of different isomers. Calculations reveal that the energetic tendency of water is to remain clustered and not to disperse around the PAH. Theoretically, we observe water confinement exclusively in the case of four water clusters and only when the anthracenes are in a cross configuration due to optimal OH∙∙∙π interactions, indicating dependence on the size and structure of the PAH. Furthermore theory sheds light on the structural changes that occur in water upon ionization of anthracene, due to the optimal interactions of the resulting hole and water hydrogen atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Dark Energy Survey Year 3 Results: Cosmological constraints from second- and third-order shear statistics

Here, we present a cosmological analysis of the third-order aperture mass statistic using Dark Energy Survey Year 3 (DES Y3) data. We perform a complete tomographic measurement of the three-point correlation function of the Y3 weak lensing shape catalog with the four fiducial source redshift bins. Building upon our companion methodology paper, we apply a pipeline that combines the two-point function ξ ± with the mass aperture skewness statistic ⟨ M ap 3 ⟩ , which is an efficient compression of the full shear three-point function. We use a suite of simulated shear maps to obtain a joint covariance matrix. By jointly analyzing ξ ± and ⟨ M ap 3 ⟩ measured from DES Y3 data with a Λ CDM model, we find S 8 = 0.780 ± 0.015 and Ω m = 0.26 6 - 0.040 + 0.039 , yielding 111% of figure-of-merit improvement in the Ω m - S 8 plane relative to ξ ± alone, consistent with expectations from simulated likelihood analyses. With a w CDM model, we find S 8 = 0.74 9 - 0.026 + 0.027 and w 0 = - 1.39 ± 0.31 , which gives an improvement of 22% on the joint S 8 - w 0 constraint. Our results are consistent with w 0 = - 1 . Our new constraints are compared to CMB data from the Planck satellite, and we find that with the inclusion of ⟨ M ap 3 ⟩ the existing tension between the datasets is at the level of 2.3 σ . We show that the third-order statistic enables us to self-calibrate the mean photometric redshift uncertainty parameter of the highest redshift bin with little degradation in the figure of merit. Our results demonstrate the constraining power of higher-order lensing statistics and establish ⟨ M ap 3 ⟩ as a practical observable for joint analyses in current and future surveys.

Gomes, R. C. H. [University of Pennsylvania] (ORCI↗
DOE OSTI2024

Operation and performance of the ATLAS tile calorimeter in LHC Run 2

The ATLAS tile calorimeter (TileCal) is the hadronic sampling calorimeter covering the central region of the ATLAS detector at the Large Hadron Collider (LHC). This paper gives an overview of the calorimeter’s operation and performance during the years 2015–2018 (Run 2). In this period, ATLAS collected proton–proton collision data at a centre-of-mass energy of 13 TeV and the TileCal was 99.65% efficient for data-taking. The signal reconstruction, the calibration procedures, and the detector operational status are presented. The performance of two ATLAS trigger systems making use of TileCal information, the minimum-bias trigger scintillators and the tile muon trigger, is discussed. Studies of radiation effects allow the degradation of the output signals at the end of the LHC and HL-LHC operations to be estimated. Finally, the TileCal response to isolated muons, hadrons and jets from proton–proton collisions is presented. The energy and time calibration methods performed excellently, resulting in good stability and uniformity of the calorimeter response during Run 2. The setting of the energy scale was performed with an uncertainty of 2%. The results demonstrate that the performance is in accordance with specifications defined in the Technical Design Report.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Guanajuato Policy Options for Land Transportation Greenhouse Gas Reduction [Slides]

NREL consulted the Mexican state of Guanajuato to help them identify and prioritize policies that are specifically applicable to their land transportation system and help them meet their greenhouse gas (GHG) reduction goals. Three focus groups were held across Guanajuato to get the input from a wide variety of users of the transportation system. These focus groups performed a SWOT (strengths, weaknesses, opportunities and threats) analysis of Guanajuato's transportation system and logged the policy goals of participants. NREL then developed a menu of policy options that have been used successfully in relevant countries and prioritized these policies based on the weighted input from stakeholder groups. The most applicable policies were a paid parking strategy, regional transit master plan, and expanded bike and pedestrian infrastructure. Case studies of these three policies, plus a few more, were then presented to inform Guanajuato of how these policies could successfully be implemented. Finally, the GHG reductions for five of the most applicable policies were estimated to reduce emissions from Guanajuato's land transportation system nearly 40% below business-as-usual emissions by 2050.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

Characterizing the Roman Grism Redshift Efficiency of Type Ia Supernova Host Galaxies for the High-latitude Time-domain Survey

The High-latitude Time-domain Survey (HLTDS) for the Nancy Grace Roman Space Telescope (Roman) will discover thousands of high-redshift Type Ia supernovae (SNe Ia) to set generation-defining cosmological constraints on dark energy. To construct the Roman SN Hubble diagram, a strategy to obtain redshifts must be determined. While the nominal HLTDS will use only the Roman prism, in this work, we consider the utility of the Roman grism observations from overlap with the High-latitude Wide-area Survey for SN Ia cosmology. We determine a galaxy grism redshift recovery rate by simulating dispersed grism images and measuring redshifts with the Grizli software, obtaining an H-band 50% redshift recovery at magnitude 20.61 and 90% recovery at magnitude 19.27. To estimate the total number of spectroscopic redshifts expected for Roman SN cosmology, we also consider a Roman prism SN redshift efficiency and a ground-based telescope redshift efficiency for host galaxies. We apply these redshift efficiencies to SN Ia catalog-level simulations and predict that ∼6800 SNe will have an SN or host spectroscopic redshift. Second, we evaluate the size of potential systematics related to modeling the grism redshift efficiency by considering the impact of additional dependences on stellar mass and host-galaxy color. We estimate the largest potential size of this systematic to be 0.0066 ± 0.002 and −0.0266 ± 0.0079, roughly 42.9% and 49.6% of the statistical uncertainty, for w 0 and w a , respectively. Lastly, we consider the effects of assuming different redshift sources on the optimization of the HLTDS survey strategy by measuring relative changes to the dark energy figure of merit.

Chen, Rebecca C. [Duke Univ., Durham, NC (United S↗
NASA NTRS1972

A NASTRAN correlation study for vibrations of a cross-stiffened ship's deck

To evaluate the effectiveness of NASTRAN for predicting the vibration modes of panels with bending-membrane coupling, a cross-stiffened ship deck was analyzed. In correlation with experimental data, one NASTRAN finite element representation gave results slightly more accurate than a previous analytical solution. Computational time was excessively long, due to the Guyan method of reducing the eigenvalue problem. It is recommended that a more efficient method of matrix reduction be implemented for the lumped mass formulation.

Thornton, E. A.↗
NASA NTRS1972

Investigation of high speed phenomena

Experimental research is reported for laboratory simulation of meteors and meteoroid impacts on solid surfaces. Two types of mass measurements are discussed: impact ionization risetime effect, and luminous efficiency measurements.

Becker, D. G.↗
NASA NTRS1973

Testing and evaluation of the LES-6 pulsed plasma thruster by means of a torsion pendulum system

Performance characteristics of the LES-6 pulsed plasma thruster over a range of input conditions were investigated by means of a torsion pendulum system. Parameters of particular interest included the impulse bit and time average thrust (and their repeatability), specific impulse, mass ablated per discharge, specific thrust, energy per unit area, efficiency, and variation of performance with ignition command rate. Intermittency of the thruster as affected by input energy and igniter resistance were also investigated. Comparative experimental data correlation with the data presented. The results of these tests indicate that the LES-6 thruster, with some identifiable design improvements, represents an attractive reaction control thruster for attitude contol applications on long-life spacecraft requiring small metered impulse bits for precise pointing control of science instruments.

Hamidian, J. P.↗
NASA NTRS1973

Preliminary stratigraphy of the Apollo 15 drill core

The crew of Apollo 15 collected a 242-cm-long core of the regolith developed on the surface of Palus Putredinus (3 deg 39 min 20 sec E, 26 deg 26 min 00 sec N). This core consists of 42 major textural units, which range from a few millimeters to 13 cm thick. The regolith at this site was deposited layer by layer, each layer having been reworked, to some degree, by micrometeorite bombardment. The particle composition of six layers for which samples were obtained varies in a random fashion, thus supporting the heterogeneous, layered model of the regolith. The ratio of lithic fragments derived from the Apennine Front to that derived from the mare surface is about 1:1. This lithic ratio, in a regolith section 3.75 km from the base of the front, is an indication of the efficiency of lateral transport of soil by impact processes and mass wasting.

Heiken, G.↗
NASA NTRS1974

An inlet analysis for the NASA hypersonic research engine aerothermodynamic integration model

A theoretical analysis for the inlet of the NASA Hypersonic Research Engine (HRE) Aerothermodynamic Integration Model (AIM) has been undertaken by use of a method-of-characteristics computer program. The purpose of the analysis was to obtain pretest information on the full-scale HRE inlet in support of the experimental AIM program (completed May 1974). Mass-flow-ratio and additive-drag-coefficient schedules were obtained that well defined the range effected in the AIM tests. Mass-weighted average inlet total-pressure recovery, kinetic energy efficiency, and throat Mach numbers were obtained.

Andrews, E. H., Jr.↗
NASA NTRS1977

Symbolic manipulation techniques for vibration analysis of laminated elliptic plates

A computational scheme is presented for the free vibration analysis of laminated composite elliptic plates. The scheme is based on Hamilton's principle, the Rayleigh-Ritz technique and symmetry considerations and is implemented with the aid of the MACSYMA symbolic manipulation system. The MACYSMA system, through differentiation, integration, and simplification of analytic expressions, produces highly-efficient FORTRAN code for the evaluation of the stiffness and mass coefficients. Multiple use is made of this code to obtain not only the frequencies and mode shapes of the plate, but also the derivatives of the frequencies with respect to various material and geometric parameters.

Andersen, C. M.↗
NASA NTRS1978

The application of photovoltaic roof shingles to residential and commercial buildings

The recent development of a shingle-type solar-cell module makes it possible to incorporate easily photovoltaic power generation into the sloping roofs of residential or commercial buildings. These modules, which use a closely packed array of nineteen 53-mm-diameter circular solar cells, are capable of producing 101 watts/sq m of module area under standard operating conditions. This module performance is achievable by the use of solar cells with an average efficiency of 13.3 percent at 1 kW/sq m air-mass-1.5 insolation and at a cell temperature of 28 C. When these modules are mounted on a sloping south-facing roof which is insulated on the rear surface, the annual energy generated at the maximum power operating point will vary from 255.6 to 137.3 kWh/sq m of module area depending on the site location, with Albuquerque, NM, and Seattle, WA, representing the highest and lowest values of the thirteen sites considered.

Shepard, N. F., Jr.↗
NASA NTRS1981

Thermodynamic limits to the efficiency of solar energy conversion by quantum devices

The second law of thermodynamics imposes a strict limitation to the energy converted from direct solar radiation to useful work by a quantum device. This limitation requires that the amount of energy converted to useful work (energy in any form other than heat) can be no greater than the change in free energy of the radiation fields. Futhermore, in any real energy conversion device, not all of this available free energy in the radiation field can be converted to work because of basic limitations inherent in the device itself. A thermodynamic analysis of solar energy conversion by a completely general prototypical quantum device is presented. This device is completely described by two parameters, its operating temperature T sub R and the energy threshold of its absorption spectrum. An expression for the maximum thermodynamic efficiency of a quantum solar converter was derived in terms of these two parameters and the incident radiation spectrum. Efficiency curves for assumed solar spectral irradiance corresponding to air mass zero and air mass 1.5 are presented.

Buoncristiani, A. M.↗
NASA NTRS1982

Ground- versus spaced-based orbital transfer vehicle

A space based orbital transfer vehicle (SBOTV) and ground based OTV's (GBOTV) are compared for debris protection, space based OTV maintenance provisions, flight performance, onorbit refueling, and launch and return operations. Debris protection has a severe impact on the SBOTV, while the penalty for the GBOTV is much less severe. A key technology issue is the protection capability of composite materials. Onorbit maintenance is critical for SBOTV. Reduction of losses during the various transfers is th maine problem with refueling a SBOTV. Zero-g propellant storage and transfer is an important technology area for SBOTV. A reusable shroud must be developed to return GBOTV's if a Shuttle derivative vehicle is used. The advantage of space basing lies in more efficient use of the launch vehicle. Since most of the mass going to LEO is OTV propellant, and the launches to deliver the SBOTV propellant are generally mass limited, substantially fewer launches are required to support the SBOTV.

Rehder, J.↗
NASA NTRS1989

Performance of a 100 kW class applied field MPD thruster

Performance of a 100 kW, applied field magnetoplasmadynamic (MPD) thruster was evaluated and sensitivities of discharge characteristics to arc current, mass flow rate, and applied magnetic field were investigated. Thermal efficiencies as high as 60 percent, thrust efficiencies up to 21 percent, and specific impulses of up to 1150 s were attained with argon propellant. Thrust levels up to 2.5 N were directly measured with an inverted pendulum thrust stand at discharge input powers up to 57 kW. It was observed that thrust increased monotonically with the product of arc current and magnet current.

Mantenieks, Maris A.↗