Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Magnetic properties of the ammonolysis product of α-Fe powder containing a small amount of aluminum

Magnetite was prepared containing a small amount of aluminum and its nitride was generated through low temperature ammonolysis following reduction under hydrogen. The nitrided product was determined by XRD to be a mixture of “α″-Fe{sub 16}N{sub 2}” having a slightly deformed crystal structure from α″-Fe{sub 16}N{sub 2} and the residual α-Fe. Magnetic coercivity of the mixture was decreased from the value of 150 mT obtained for the nitride product made without aluminum, due to the precipitation of nonmagnetic amorphous alumina in the low temperature nitrided bcc (Fe{sub 1−x}Al{sub x}) with x≤0.03. The aluminum-doped nitride product in which the “α″-Fe{sub 16}N{sub 2}” fraction was 30 at% exhibited magnetization at 1.5 T of approximately 200 Am{sup 2}kg{sup −1} at room temperature and its magnetic coercivity was 20 mT. - Graphical abstract: Magnetic iron nitride particles were separated by nonmagnetic amorphous γ-alumina. Magnetic coercivity was decreased by reducing the magnetic interaction between the particles. - Highlights: • Magnetic coercivity decreased in α”-Fe{sub 16}N{sub 2} like compound as a soft magnet. • Small amount of Al addition was effective in its preparation. • Magnetic interaction decreased between the “α”-Fe{sub 16}N{sub 2}” particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning the Magnetic Properties of CrI 3 Using Ni Thin Film Deposition for Applications in Spintronic Devices

Chromium triiodide (CrI 3 ), a van der Waals magnet, has recently been shown to host Ising ferromagnetism down to the monolayer limit. It is a potentially important material in 2D magnet-based applications, such as magnetic sensors and spintronic devices. Prior studies have revealed the coexistence of two different types of interlayer magnetic coupling, the antiferromagnetic (AFM) coupling near the surface and ferromagnetic (FM) coupling in the deep bulk layers, in pristine CrI 3 crystals below the Curie temperature. In this study, we used Ni thin film deposition to tune the surface magnetic states in bulk CrI 3 . A nanometer thickness (4 nm thick) of Ni was deposited on the surface of CrI 3 using electron-beam evaporation to form a Ni/CrI 3 heterostructure. The deposited Ni thin layer forms nanoclusters that completely cover the CrI 3 surface. Magnetic states of CrI 3 before and after Ni deposition are probed by ultralow-frequency magneto-Raman spectroscopy. Instead of seeing three spin wave branches in Raman scattering below 2 T, as in pristine bulk CrI 3 , in Ni/CrI 3 , we observe only a single spin wave branch, which is softened compared to that in pristine CrI 3 and displays a Zeeman shift under an out-of-plane magnetic field up to 7 T. This observation reveals that the AFM layers on pristine CrI 3 crystal surfaces transit into FM layers, so the entire CrI 3 crystal is in the FM state after Ni deposition. First-principles calculations show that Ni atoms tend to diffuse into the CrI 3 lattice, and the FM interlayer coupling has a much lower energy than AFM coupling in the presence of Ni atoms. As a result, our studies show that the magnetic state of CrI 3 can be modified through deposition of a thin metal layer on the surface, offering a route for controlling the spin degree of freedom in van der Waals magnets.

36 MATERIALS SCIENCE↗

Structure, dielectric, and magnetic properties of Sr{sub 2}TiMnO{sub 6} ceramics

Sr{sub 2}TiMnO{sub 6}, a double perovskite associated with high degree of B-site cation disorder was investigated in detail for its structural, magnetic, and dielectric properties. Though x-ray powder diffraction analysis confirms its cubic structure, first order Raman scattering and infrared reflectivity spectra indicate a breaking of the local cubic symmetry. The magnetization study reveals an anomaly at 14 K owing to a ferrimagnetic/canted antiferromagneticlike ordering arising from local Mn-O-Mn clusters. Saturated M-H hysteresis loops obtained at 5 K also reflect the weak ferromagnetic exchange interactions present in the system and an approximate estimation of Mn{sup 3+}/Mn{sup 4+} was done using the magnetization data for the samples sintered at different temperatures. The conductivity and dielectric behavior of this system has been investigated in a broad temperature range of 10 to 300 K. Intrinsic permittivity was obtained only below 100 K whereas giant permittivity due to conductivity and Maxwell-Wagner polarization was observed at higher temperatures. X-ray photoemission studies further confirmed the presence of mixed oxidation states of Mn and the valence band spectra analysis was carried out in detail.

36 MATERIALS SCIENCE↗

Crystal structures and magnetic properties of magnetite (Fe{sub 3}O{sub 4})/Polyvinyl alcohol (PVA) ribbon

Ribbon of magnetite (Fe{sub 3}O{sub 4})/Polyvinyl Alcohol (PVA) nanoparticles have been successfully fabricated with various concentration of PVA synthesized by co-precipitation method. Particle size of nanoparticles Fe{sub 3}O{sub 4} sample and ribbon Fe{sub 3}O{sub 4}/PVA 25% sample is about 9.34 nm and 11.29 nm, respectively. The result of Vibrating Sample Magnetometer (VSM) showed that saturation magnetization value decreased from 76.99 emu/g to 15.01 emu/g and coercivity increased from 49.30 Oe to 158.35 Oe as increasing concentration of PVA. Atomic Force Microscopy (AFM) analysis showed that encapsulated PVA given decreasing agglomeration, controlled shape of nanoparticles Fe{sub 3}O{sub 4} more spherical and dispersed. Surface roughness decreased with increasing concentration of PVA.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural and magnetic properties of Y-doped La{sub 0.5}Sr{sub 0.5}MnO{sub 3} manganite system: Evidence of step-like magnetization

The magnetic and transport properties of bulk doped manganite, La{sub 0.5−y}Y{sub y}Sr{sub 0.5}MnO{sub 3} have been studied as a function of yttrium doping, y, for 0 ≤ y ≤ 0.25. In the absence of the yttrium this is a well studied half-doped manganite which is a metallic ferromagnet. The end members of this system (with y = 0 and 0.25) are found to be structurally different (rhombohedral and orthorhombic, respectively) due to the large distortions caused by the yttrium. These distortions make this series of compounds particularly interesting. The magnetization obtained in zero field cooled (ZFC) and field cooled (FC) studies show dramatic changes as the value of y is raised above 0.05. The magnetic behavior is further investigated by a study of the hysteresis loops, frequency dependent susceptibility and studies of the magnetic relaxation. The results are understood in terms of the average size of the cation on the A site, , and the variance, σ{sup 2} (= ∑y{sub i}{sup 2}r{sub i}{sup 2} - {sup 2}). The value of the variance, σ{sup 2}, increases rapidly with doping, y, induces melting of the long range ferromagnetic ordering, exhibiting a stepwise variation of magnetization (metamagnetic like). Based on the present results a magnetic phase diagram has been drawn demonstrating different magnetic phase sequences with the variation of σ{sup 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic Properties of Some Tellurite Glasses

The AC magnetic susceptibility in the range 5–130 K of the tellurite glass systems: TeO{sub 2}–MnO{sub 2}–ZnO–PbO and TeO{sub 2}–MnO{sub 2}–V{sub 2}O{sub 5}–Fe{sub 2}O{sub 3} was measured and analyzed. The investigations of the AC magnetic susceptibility facilitated the determination of the molar susceptibility, paramagnetic magnetic susceptibility, paramagnetic Curie temperature, and magnetic entropy changes of the tellurite glasses. The results clarified that the temperature dependence of the magnetic susceptibility deviated from the Curie law and the increase of the small negative values of Curie temperature indicated negative interchange interactions between the antiferromagnetically coupled manganese ions within the present glass network. The magnetic moments evaluated from susceptibility measurements of the glasses show the predominance of the Mn{sup 2+} valence state than Mn{sup 3+} valence state of MnO{sub 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Viking magnetic properties investigation - Preliminary results

Three permanent-magnet arrays are aboard the Viking lander. By sol 35, one array, fixed on a photometric reference test chart on top of the lander, has clearly attracted magnetic particles from airborne dust; two other magnet arrays, one strong and one weak, incorporated in the backhoe of the surface sampler, have both extracted considerable magnetic mineral from the surface as a result of nine insertions associated with sample acquisition. The loose Martian surface material around the landing site is judged to contain 3 to 7 per cent highly magnetic mineral which, pending spectrophotometric study, is thought to be mainly magnetite.

Hargraves, R. B.↗

Viking magnetic properties investigation - Further results

The amounts of magnetic particles held on the reference test chart and backhoe magnets on lander 2 and lander 1 are comparable, indicating the presence of an estimated 3 to 7 percent by weight of relatively pure, strongly magnetic particles in the soil at the lander 2 sampling site. Preliminary spectrophotometric analysis of the material held on the backhoe magnets on lander 1 indicates that its reflectance characteristics are indistinguishable from material within a sampling trench with which it has been compared. The material on the RTC magnet shows a different spectrum, but it is suspected that the difference is the result of a reflectance contribution from the magnesium metal covering on the magnet. It is argued that the results indicate the presence, now or originally, of magnetite, which may be titaniferous.

Hargraves, R. B.↗

The Viking magnetic properties experiment - Primary mission results

Three permanent magnet arrays were mounted on each Viking lander: a strong array fixed on a photometric reference test chart on top of the landers; and two arrays, one strong and one weak, incorporated into the backhoe of the surface sampler. Some or all of the magnetic particles detected could be highly magnetic unoxidized mineral grains (metallic Fe, magnetite, pyrrhotite) forming the core beneath a reddish coating of limonite or hematite; or grains composed of gamma-Fe2O3, with and without other iron oxides; or igneous rock (or mineral particles) which consist of an admixture of unweathered silicate material or minerals with a significant fraction of highly magnetic phase, again with a reddish coating; they could be also igneous rock or mineral particles, intrinsically nonmagnetic, but having a reddish coating containing gamma-Fe2O3; or clay mineral particles which contain and/or are coated with Fe2O3, of which a substantial fraction is in the gamma-Fe2O3 form.

Hargraves, R. B.↗

Viking magnetic properties experiment - Extended mission results

The backhoe magnets on Viking Lander (VL) 2 were successfully cleaned, followed by a test involving successive insertions of the cleaned backhoe into the surface. Rapid saturation of the magnets confirmed evidence from primary mission results that the magnetic mineral in the Martian surface is widely distributed, most probably in the form of composite particles of magnetic and nonmagnetic minerals. An image of the VL 2 backhoe taken via the X4 magnifying mirror demonstrates the fine-grained nature of the attracted magnetic material. The presence of maghemite and its occurrence as a pigment in, or a thin coating on, all mineral particles or as discrete, finely divided and widely distributed crystallites, are consistent with data from the inorganic analysis experiments and with laboratory simulations of results of the biology experiments on Mars.

Hargraves, R. B.↗

Magnetic properties versus interface density in rigid-exchange-coupled amorphous multilayers with induced uniaxial anisotropy

We demonstrate the possibility to tune the saturation magnetization, coercivity, and uniaxial in-plane anisotropy constant in amorphous bilayers and multilayers of Co 85 (Al 70 Zr 30 ) 15 and Sm 11 Co 82 Ti 7 through the interface density. From magnetometry and x-ray circular dichroism (XMCD) measurements, we conclude that the easy-axis coercivity μ 0 H c increases four times when the number of bilayer repetitions, N, increases from 1 to 10 within a constant total sample thickness of 20 nm. At the same time, the anisotropy constant K u also increases by a factor four, whereas the saturation magnetization M s decreases slightly. The Co spin and orbital moments, m s and m l , are found to be approximately constant within the sample series. The average total Co moment is only 0.8-0.9 μ B /atom, but the m l /m s ratio is strongly enhanced compared to pure Co. Magnetization curves extracted from XMCD measurements show that the Co and Sm moments are ferromagnetically coupled for all samples.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Correlation of the Optical and Magnetic Properties of Bi{sub 2}Te{sub 3}–Sb{sub 2}Te{sub 3} Crystals

The magnetic and optical properties of Bi{sub 2}Te{sub 3}–Sb{sub 2}Te{sub 3} crystals are investigated depending on the ratio of Bi{sub 2}Te{sub 3} and Sb{sub 2}Te{sub 3} components in the solid-solution composition and temperature. The results make it possible to affirm that an abrupt decrease in the magnetic-susceptibility anisotropy at T = 293 K is observed for samples, in which the electron–plasmon interaction is observed according to the data of optical studies. This is caused by the approaching energies of the plasmon and band-to-band transition which form the fundamental-absorption edge.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, thermodynamic, mechanical, and magnetic properties of FeW system

The Fe-W system is systematically investigated through a combined use of first-principles calculation, cluster expansion, special quasirandom structures, and experiments. It is revealed that the ferromagnetic state of BCC Fe-W solid solution has lower heat of formation than its nonmagnetic state within the entire composition range, and intermetallic λ-Fe{sub 2}W and μ-Fe{sub 7}W{sub 6} phases are energetically favorable with negative heats of formation. Calculations also show that the Fe-W solid solution has much lower coefficient of thermal expansion than its mechanical mixture, and that the descending sequence of temperature-dependent elastic moduli of each Fe-W solid solution is E > G > B. Moreover, magnetic state should have an important effect on mechanical properties of Fe-W phases, and electronic structures can provide a deeper understanding of various properties of Fe-W. The derived results agree well with experimental observations, and can clarify two experimental controversies regarding structural stability and magnetic property of Fe-W phases in the literature.

36 MATERIALS SCIENCE↗

Novel 1D coordination polymer {l_brace}Tm(Piv){sub 3{r_brace}n}: Synthesis, structure, magnetic properties and thermal behavior

The new 1D coordination polymer {l_brace}Tm(Piv){sub 3{r_brace}n} (1), where Piv=OOCBu{sup t-}, was synthesized in high yield (>95%) by the reaction of thulium acetate with pivalic acid in air at 100 Degree-Sign S. According to the X-ray diffraction data, the metal atoms in compound 1 are in an octahedral ligand environment unusual for lanthanides. The magnetic and luminescence properties of polymer 1, it's the solid-phase thermal decomposition in air and under argon, and the thermal behavior in the temperature range of -50 Horizontal-Ellipsis +50 Degree-Sign S were investigated. The vaporization process of complex 1 was studied by the Knudsen effusion method combined with mass-spectrometric analysis of the gas-phase composition in the temperature range of 570-680 K. - Graphical Abstract: Novel 1D coordination polymer {l_brace}Tm(Piv){sub 3{r_brace}n} was synthesized and studied by X-ray diffraction. The magnetic, luminescence properties, the thermal behavior and the volatility for the compound {l_brace}Tm(Piv){sub 3{r_brace}n} were investigated. Black-Small-Square Highlights: Black-Right-Pointing-Pointer We synthesized the coordination polymer {l_brace}Tm(Piv){sub 3{r_brace}n}. Black-Right-Pointing-Pointer Tm atoms in polymer have the coordination number 6. Black-Right-Pointing-Pointer Polymer exhibits blue-color emission at room temperature. Black-Right-Pointing-Pointer Polymer shows high thermal stability and volatility. Black-Right-Pointing-Pointer Polymer has no phase transitions in the range of -50 Horizontal-Ellipsis +50 Degree-Sign S.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of disorder on electronic and magnetic properties of Co{sub 2}VGa Heusler alloy

This paper presents the effect of disorder on electronic, magnetic and half-metallic properties of Co{sub 2}VGa Heusler alloy using density functional theory. Binary mixing is the most common form of atomic disorder in these compounds. We have considered three types of disorders: DO{sub 3}, A2 and B2 disorder which corresponds to X-Y, X-Z and Y-Z mixing respectively. After structural optimization, we found that A2 disorder has high formation energy and is most unlikely to occur. The half-metallic nature of the alloy is destroyed in presence of DO{sub 3} and A2 disorder. The destruction of half-metallicity is due to reconstruction of energy states. Also the loss of half-metallicity is accompanied by reversal of spin-polarization at the Fermi level. B2 disorder retains the half-metallic nature of the alloy but spin-polarization value is reduced as compared to the ordered alloy.

36 MATERIALS SCIENCE↗

Elastic and Magnetic Properties of Cubic Fe{sub 4}C from First-Principles

First-principles calculations, based on density functional theory (DFT), are used to study the phase stability, elastic, magnetic, and electronic properties of cubic (c)-Fe{sub 4}C. Our results show that c-Fe{sub 4}C has ferromagnetic (FM) ground state as compared with antiferromagnetic (AFM) and nonmagnetic (NM) states. To study the phase stability of c-Fe{sub 4}C, BCC Fe{sub 4}C, FCC Fe{sub 4}C, and BCC Fe{sub 16}C, where C is considered at tetrahedral and octahedral interstitial sites, are also considered. The formation energy of c-Fe{sub 4}C is smaller than BCC Fe{sub 4}C but the shear moduli of c-Fe{sub 4}C is negative in both the FM and AFM states indicating that c-Fe{sub 4}C is dynamically not stable in the magnetic (FM/AFM) state. NM state has positive shear moduli which illustrates that the instability in c-Fe{sub 4}C is due to magnetism and can lead to soft phonon modes. The calculated formation energy also shows that c-Fe{sub 4}C has higher formation energy than the FCC Fe{sub 4}C indicating no possibility of c-Fe{sub 4}C in low carbon steels at low temperature. The magnetic moment of Fe in c-Fe{sub 4}C is also sensitive to lattice deformation and the electronic structure reveals the itinerant nature of electrons responsible for metallic behavior of c-Fe{sub 4}C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗