Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNET SYSTEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

STRUCTURE AND MAGNETIC FIELDS IN THE PRECESSING JET SYSTEM SS 433. II. INTRINSIC BRIGHTNESS OF THE JETS

Deep Very Large Array imaging of the binary X-ray source SS 433, also classified as a microquasar, has been used to study the intrinsic brightness distribution and evolution of its radio jets. The intrinsic brightness of the jets as a function of age at emission of the jet material {tau} is recovered by removal of the Doppler boosting and projection effects. We find that, intrinsically, the two jets are remarkably similar when compared for equal {tau}, and that they are best described by Doppler boosting of the form D {sup 2+{alpha}}, as expected for continuous jets. The intrinsic brightnesses of the jets as functions of age behave in complex ways. In the age range 60 days < {tau} < 150 days, the jet decays are best represented by exponential functions of {tau}, but linear or power-law functions are not statistically excluded. This is followed by a region out to {tau} {approx_equal} 250 days during which the intrinsic brightness is essentially constant. At later times, the jet decay can be fit roughly as exponential or power-law functions of {tau}.

79 ASTRONOMY AND ASTROPHYSICS↗

Comparison of Leakage Magnetic Field from Matched and Mismatched Double-D Coil based Wireless Charging System for Electric Vehicles

In this paper, a magnetic shield design is proposed for a matched and mismatched coil based high-power wireless charging system (WCS). The high-power WCS are highly prone to exceed the safety limits of both the electric and magnetic field leakage. The leakage magnetic field from the mismatched pads are higher than the matched pads. In a mismatched system, the receiver is usually made much smaller than the transmitter, which requires higher amp-turns in the coils to transfer the same amount of power. In addition, coupling factor is lower in mismatched systems. Therefore, the electromagnetic field (EMF) emission is higher for a mismatched system, compared to matched system where both the transmitter and receiver are similar and large. This phenomenon applies for both the nonpolarized-circular and DD pads. In this paper, the leakage magnetic field is compared for the matched-DD and mismatched-DD coil-based WCS. The leakage field is evaluated through finite element analysis (FEA) and verified experimentally through an 11 kW mismatched DD system. The results show that, the leakage magnetic field is much higher for a mismatched WCS, compared to a matched WCS.

Mostak, Mostak Mohammad↗

Self-consistently renormalized spin-wave theory of layered ferromagnets on the honeycomb lattice

We develop a self-consistently renormalized spin-wave theory, within a mean-field approximation, for the two-dimensional Heisenberg ferromagnet with perpendicular easy-axis anisotropy on the honeycomb lattice, as well as its few-layer and bulk extensions. In this method, the magnetization dependence on temperature is found as the solution of the self-consistency equation. Furthermore, we account for the physical difference of surface and bulk layers by treating the layers as separate sublattices. Thus the method can be readily generalized to study various magnetic phenomena in a broad range of systems, including those comprising magnetically inequivalent sublattices. Using our theory, we calculate the temperature-dependent magnetization for two chromium-based layered van der Waals insulating magnets, Cr 2 Ge 2 Te 6 and CrI 3 , employing various sets of Heisenberg exchange and single-ion anisotropy values reported for these materials in the existing literature. As expected, we observe a strong dimensionality effect where the ordering temperature is reduced and its sensitivity on the anisotropy is enhanced with the decrease of dimensionality.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

STRUCTURE AND MAGNETIC FIELDS IN THE PRECESSING JET SYSTEM SS 433. III. EVOLUTION OF THE INTRINSIC BRIGHTNESS OF THE JETS FROM A DEEP MULTI-EPOCH VERY LARGE ARRAY CAMPAIGN

We present a sequence of five deep observations of SS 433 made over the summer of 2007 using the Very Large Array in the A configuration at 5 and 8 GHz. In this paper, we study the brightness profiles of the jets and their time evolution. We also examine the spectral index distribution in the source. We find (as previously reported from the analysis of a single earlier image) that the profiles of the east and west jets are remarkably similar if projection and Doppler beaming are taken into account. The sequence of five images allows us to disentangle the evolution of brightness of individual pieces of jet from the variations of jet power originating at the core. We find that the brightness of each piece of the jet fades as an exponential function of age (or distance from the core), e{sup -}{tau}/{tau}{sup '}, where {tau} is the age at emission and {tau}' = 55.9 {+-} 1.7 days. This evolutionary model describes both the east and west jets equally well. There is also significant variation (by a factor of at least five) in jet power with birth epoch, with the east and west jets varying in synchrony. The lack of deceleration between the scale of the optical Balmer line emission (10{sup 15} cm) and that of the radio emission (10{sup 17} cm) requires that the jet material is much denser than its surroundings. We find that the density ratio must exceed 300:1.

79 ASTRONOMY AND ASTROPHYSICS↗

AC resistance measurement of Skew Quadrupole Magnet

This tech note exhibits AC resistance measurement system of the Skew Quadrupole magnet with and without a beam pipe used in the AGS ring. The measurement results are compared with a system that uses skew quad power supply for the magnet. An introduction to ac resistance conceptualization and modeling is presented. It is followed by measurement methodology used and the results.

43 PARTICLE ACCELERATORS↗

Shield Design for 50 kW Three-Phase Wireless Charging System

In this paper, magnetic field emissions (MFE) from a 50 kW bipolar coil-based three-phase wireless charging system (WCS) is investigated. Then, a shield design is proposed to suppress the MFE below the safety limit identified by the International Commission of Non-Ionized Radiation Protection (ICNIRP) guidelines. Bipolar coil-based three-phase (3φ) WCSs provide extremely high power-density; therefore, the 3φ WCSs are highly promising for high-power fast-wireless-charging of the electric vehicles. For the high-power EV application, it is a critical challenge to design a shield to suppress the MFE below the safety limit. The traditional aluminum shield is found ineffective for the bipolar 3φ-WCS. The proposed shield is designed with high-permeability magnetic material, i.e. ferrite, nanocrystalline material, etc. The proposed shield is simulated in finite element analysis (FEA) and the FEA results show that the proposed magnetic shield effectively suppresses the magnetic field emission below the ICNIRP limit. The generalized design of the proposed shield can be used for even higher power bipolar coil based WCSs.

Mohammad, Mostak↗

Protection of Hardware: Powering Systems (Power Converter, Normal Conducting, and Superconducting Magnets)

Along with the protection of magnets and power converters, we have added a section on personnel protection because this is our highest priority in the design and operation of power systems. Thus, our topics are the protection of people, power converters, and magnet loads (protected from the powering equipment), including normal conducting magnets and superconducting magnets.

43 PARTICLE ACCELERATORS↗

Real-space observation of magnetic excitations and avalanche behavior in artificial quasicrystal lattices

Artificial spin ice lattices have emerged as model systems for studying magnetic frustration in recent years. Most work to date has looked at periodic artificial spin ice lattices. In this paper, we observe frustration effects in quasicrystal artificial spin ice lattices that lack translational symmetry and contain vertices with different numbers of interacting elements. We find that as the lattice state changes following demagnetizing and annealing, specific vertex motifs retain low-energy configurations, which excites other motifs into higher energy configurations. In addition, we find that unlike the magnetization reversal process for periodic artificial spin ice lattices, which occurs through 1D avalanches, quasicrystal lattices undergo reversal through a dendritic 2D avalanche mechanism.

36 MATERIALS SCIENCE↗

SpinQuest Polarized Target System

The SpinQuest experiment at Fermilab uses a solid-state polarized ammonia target held at a magnetic field of 5 T, immersed in liquid helium-4, which is held at approximately 1K by the evaporation refrigerator. The refrigerator provides the required cooling power during the dynamic nuclear polarization (DNP) process and the high intensity interaction with the 120 GeV proton beam from the Fermilab main injector. The refrigerator was designed in compliance with the American Society of Mechanical Engineers (ASME) to operate safely at Fermilab. The high pumping capacity ($17,000 \:m^3/h$) roots stack provides the required pumping speed during DNP production data taking and a custom-made radiation hard flow control valve regulates the refrigerator temperature during the thermal equilibrium calibration measurements. The frequency of the microwave generator, an Extended Interaction Oscillator (EIO), is automated to keep the maximum polarization while the (Nuclear Magnetic Resonance) NMR system continuously measures the polarization of the target material. In this talk, an overview of the SpinQuest polarized target system will be presented as well as a brief report of recent commissioning activities and target performance during the early production runs in 2024.

Bandara, Vibodha [Colombo U.]↗

Multiple temperature-induced magnetization reversals in SmCr{sub 1−x}Fe{sub x}O{sub 3} system

Graphical abstract: - Highlights: • Multiple temperature-induced magnetization reversals were observed in x = 0.1. • Coexistence of normal and inverse magnetocaloric effects was observed. • A reasonable model was proposed to explain the magnetization reversals. - Abstract: The structural and magnetic properties of the SmCr{sub 1−x}Fe{sub x}O{sub 3} (0 ≤ x ≤ 0.5) system have been investigated. Multiple temperature-induced magnetization reversals were observed in x = 0.1. The high-temperature magnetization reversal is due to the special spin structure, in which the net canted moment of the Cr-rich regions and the net moment of the Fe–Cr ordered regions orient in opposite direction; while the low temperature one can be ascribed to the spin reorientation. The sample with x = 0.5 exhibits the highest compensation temperature. Coexistence of normal and inverse magnetocaloric effects was observed in all doped samples. Potential applications in magnetic refrigeration based constant temperature bath near room temperature (∼286 K) have been demonstrated.

36 MATERIALS SCIENCE↗

Magnetic Solitons and Thickness‐Dependent Magnetization Reversal in Interconnected Helical Nanowire Arrays

By expanding magnetic nanostructures into the third dimension, it is possible to introduce new interactions and realize new forms of magnetic textures and emergent phenomena. Consequently, this unlocks new opportunities for applications in data storage, unconventional computing and sensing by utilizing 3D devices with enhanced functionalities. Connected magnetic nanowires offer a unique platform for applications such as neuromorphic computing due to their tunability and the presence of multiple transport pathways. However to realize this promise, it is necessary to further our understanding of how to locally control the magnetization in 3D, nanowire-based geometries. In this work we show the formation of magnetic domain walls, vortices, anti-vortices, and linked vortex-anti-vortex pairs in interconnected helical nanowire arrays. We show how wire diameter and 3D geometric design can control the states that form and reveal the magnetization reversal mechanism. Hence, we demonstrate this to be a highly tunable system, where the magnetization can be readily reconfigured by an external magnetic field.

3D Nanomagnetism↗

The Magnetic Properties of the Spin-1 Ising Fullerene Cage with a Core-Shell Structure

Magnetic properties of Ising-type endohedral fullerene (IEF), which are formed by an atom encapsulated inside a diluted magnetic spherical cage, have been investigated theoretically as a function of its system parameters, and magnetism calculations by using effective field theory (EFT) were performed. Theoretical studies have been carried out to understand the effect on magnetic behaviors by the diluted magnetic surface, crystal field, and exchange couplings. The results display the first second-order phase transitions and tricritical point. The reentrant phenomena have been observed within a certain parameter range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large Magnetic Entropy Change in Pr{sub 2/3}Sr{sub 1/3}MnO{sub 3}-CuO Composite at Room Temperature

We report in this paper the impact of copper oxide (CuO) on the structural, magnetic, and magnetocaloric properties of Pr{sub 2/3}Sr{sub 1/3}MnO{sub 3} (PSMO) material. Our samples were synthesized by conventional solid-state reaction. The phase formation with no impurities was verified using the X-ray diffraction (XRD). The magnetic properties measured by Magnetic Properties Measurement System (MPMS) show the impact of the AFM CuO semiconductor on the magnetization and the transition temperature of the composite. The magnetic entropy changes were calculated from the isothermal curve of the magnetization as a function of the magnetic field. It is found that a small amount of copper oxide is enough to enhance the magnetocaloric properties of our materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modification of magnetic ground state in Tb 2 Ni 0.90 Si 2.94 by thermal annealing

In this work, we have investigated the thermal annealing effect on the physical properties of an AlB 2 -type ternary intermetallic compound, Tb 2 Ni 0.90 Si 2.94 , that undergoes spin freezing behaviour coexisting with spatially limited antiferromagnetic phase below 9.9 K in as-cast form. Thermal annealing effect is found to result in considerable changes in the magnetic ground state properties of the system. Though only one magnetic transition around 9.9 K is observed for as-cast compound, the annealed sample exhibits two distinct magnetic transitions; one around T N ~ 13.5 K and another around T f ~ 4 K. The magnetization measurements and zero field neutron diffraction study reveal that the high temperature transition is antiferromagnetic type, though of limited correlation length, while the low temperature transition corresponds to spin freezing behaviour. The ac susceptibility and heat capacity studies also confirm the existence of frustrated cluster glass state at lower temperature than the antiferromagnetic ordering temperature. Additionally, ac susceptibility data exhibits signature of an additional peak in the even lower temperature region (at 2.2 K for zero frequency) that tends to shift in opposite direction with frequency in contrast to that observed for conventional glassy transitions. The change in intrinsic local structural disorder of Ni and Si ions associated with annealing has been argued to be responsible for the different magnetic behaviour in as-cast and annealed samples.

36 MATERIALS SCIENCE↗

Effective and asymptotic criticality of structurally disordered magnets

Changes in magnetic critical behaviour of quenched structurally-disordered magnets are usually exemplified in experiments and in MC simulations by diluted systems consisting of magnetic and non-magnetic components. In our study we aim to show that similar effects can be observed not only for diluted magnets with non-magnetic impurities but may be implemented, e.g., by the presence of two (and more) chemically different magnetic components as well. Therefore we consider a model of the structurally-disordered quenched magnet where all lattice sites are occupied by Ising-like spins of different lengths L. In such a random spin length Ising model, the length L of each spin is a random variable governed by the distribution function p (L). We demonstrate that this model belongs to the universality class of the site-diluted Ising model. This proves that both models are described by the same values of asymptotic critical exponents. However, their effective critical behaviour differs. As a case study, we consider a quenched mixture of two different magnets with values of elementary magnetic moments L 1 = 1 and L 2 = s, and of concentration c and 1 - c, correspondingly. We apply field-theoretical renormalization group approach to analyse the renormalization group flow for different initial conditions, triggered by s and c, and to calculate effective critical exponents further away from the fixed points of the renormalization group transformation. We show how the effective exponents are governed by difference in properties of the magnetic components.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface-Engineered MXenes: Electric Field Control of Magnetism and Enhanced Magnetic Anisotropy

Controlling magnetism in two-dimensional (2D) materials via electric fields and doping enables robust long-range order by providing an external mechanism to modulate magnetic exchange interactions and anisotropy. Here in this report, we predict that transition metal carbide and nitride MXenes are promising candidates for controllable magnetic 2D materials. The surface terminations introduced during synthesis act as chemical dopants that influence the electronic structure, enabling controllable magnetic order. We show ground-state magnetic ordering in Janus M 2 XO x F 2–x (M is an early transition metal, X is carbon or nitrogen, and x = 0.5, 1, or 1.5) with asymmetric surface functionalization, where local structural and chemical disorder induces magnetic ordering in some systems that are nonmagnetic or weakly magnetic in their pristine form. The resulting magnetic states of these noncentrosymmetric structures can be robustly switched and stabilized by tuning the interlayer exchange couplings with small applied electric fields. Furthermore, bond directionality is enhanced by Janus functionalization, resulting in improved magnetic anisotropy, which is essential to stable 2D magnetic ordering. The mixed termination-induced anisotropy leads to robust Ising ferromagnetism with an out-of-plane easy axis over the full range of relevant termination compositions for Janus Mn 2 N. Janus Cr 2 C, V 2 C, and Ti 2 C were found to be robustly antiferromagnetic. Our results provide a strategy for exploiting asymmetric surface functionalization to achieve room-temperature nanoscale magnetism under ambient conditions in MXenes with currently available synthesis techniques.

2D materials↗