Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Life Cycle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Rational Evaluation and Cycle Life Improvement of Quinone-Based Aqueous Flow Batteries Guided by In-Line Optical Spectrophotometry

We measure electrolyte concentration and state-of-charge in real time in an operating aqueous anthraquinone-based flow battery using in-line optical spectrophotometry. By capitalizing on the linear transition in absorption spectra between oxidized and reduced states, we show how discontinuous capacity fade rates in redox flow batteries can be caused by a transition from one capacity-limiting electrolyte to the other, which is caused by reactant crossover. With this insight, we demonstrate an electrolyte-balancing scheme, which can be broadly applicable to flow battery systems with asymmetric electrolyte crossover rates.

25 ENERGY STORAGE↗

Modeling the Evolution and Life Cycle of Stable Cold Pools

Stable cold pools in California’s Central Valley (CV) are conducive to freezing temperatures, high relative humidity, and, in some cases, fog. Here, it will be shown that the Weather Research and Forecasting (WRF) Model as commonly configured cannot reproduce such conditions because of a persistent warm and dry bias near the surface. It was discovered that removing horizontal diffusion, which by default operates on model levels and thus up and down the valley’s sides, can reduce but not entirely fix the problem. Further improvements include enhancing the near-surface vertical resolution and the surface–air coupling, as both directly control the surface fluxes, especially evaporation. Yet, these alterations actually have the largest impact in the forested region surrounding the Central Valley, and influence the nighttime relative humidity in the CV only indirectly via nocturnal drainage flows. While it is not clear how realistic are the increased evaporation in the forest or the drainage flows, how and why these alterations result in significantly improved relative humidity reconstructions within the Central Valley are shown.

54 ENVIRONMENTAL SCIENCES↗

Life Cycle Analysis and Recycling of CdTe Solar Modules

Photovoltaic modules may contain small amounts of regulated materials, which vary from one type to another. The photovoltaic industry is investigating module recycling options as part of their pro- active long-term environmental strategy to preserve the environmental friendliness of solar cells. Previous studies at Brookhaven National Laboratory (BNL) and First Solar L.L.C. (FS) showed that recycling is technologically and economically feasible, but further research is needed to achieve complete separation and recovery of the metals. Brookhaven's PV EH&S Program and First Solar have collaborated in the past in the area of recycling research, with First Solar supplying samples of PV modules and samples of manufacturing waste that BNL needed for its research.

99 GENERAL AND MISCELLANEOUS↗

The Need for a Life Cycle Assessment of Drone-Based Commercial Package Delivery

Commercial freight drones are currently illegal in the U.S. Consequently, commercial interests such as Amazon, Inc. will be lobbying for new regulatory allowances in the coming years. The Federal Aviation Administration and other government entities must balance safety and other public interests against the potential commercial benefits of UAV freight. Controversy over commercial UAV’s has so far centered on the privacy implications of the devices, which are significant. However, no assessment has yet been made of the energy and environmental implications of widespread UAV-based delivery. Such an accounting of environmental impacts would inform current regulatory discussions about whether and how much commercial drone traffic should be permitted.

25 ENERGY STORAGE↗

Material and Energy Flows in the Materials Production, Assembly, and End-of-Life Stages of the Automotive Lithium-Ion Battery Life Cycle

This document contains material and energy flows for lithium-ion batteries with an active cathode material of lithium manganese oxide (LiMn₂O₄). These data are incorporated into Argonne National Laboratory’s Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model, replacing previous data for lithium-ion batteries that are based on a nickel/cobalt/manganese (Ni/Co/Mn) cathode chemistry. To identify and determine the mass of lithium-ion battery components, we modeled batteries with LiMn₂O₄ as the cathode material using Argonne’s Battery Performance and Cost (BatPaC) model for hybrid electric vehicles, plug-in hybrid electric vehicles, and electric vehicles. As input for GREET, we developed new or updated data for the cathode material and the following materials that are included in its supply chain: soda ash, lime, petroleum-derived ethanol, lithium brine, and lithium carbonate. Also as input to GREET, we calculated new emission factors for equipment (kilns, dryers, and calciners) that were not previously included in the model and developed new material and energy flows for the battery electrolyte, binder, and binder solvent. Finally, we revised the data included in GREET for graphite (the anode active material), battery electronics, and battery assembly. For the first time, we incorporated energy and material flows for battery recycling into GREET, considering four battery recycling processes: pyrometallurgical, hydrometallurgical, intermediate physical, and direct physical. Opportunities for future research include considering alternative battery chemistries and battery packaging. As battery assembly and recycling technologies develop, staying up to date with them will be critical to understanding the energy, materials, and emissions burdens associated with batteries.

25 ENERGY STORAGE↗

Biomass Direct Liquefaction Options: TechnoEconomic and Life Cycle Assessment

The purpose of this work was to assess the competitiveness of two biomass to transportation fuel processing routes, which were under development in Finland, the U.S. and elsewhere. Concepts included fast pyrolysis (FP), and hydrothermal liquefaction (HTL), both followed by hydrodeoxygenation, and final product refining. This work was carried out as a collaboration between VTT (Finland), and PNNL (USA). The public funding agents for the work were Tekes in Finland and the Bioenergy Technologies Office of the U.S. Department of Energy. The effort was proposed as an update of the earlier comparative technoeconomic assessment performed by the IEA Bioenergy Direct Biomass Liquefaction Task in the 1980s. New developments in HTL and the upgrading of the HTL biocrude product triggered the interest in reinvestigating this comparison of these biomass liquefaction processes. In addition, developments in FP bio-oil upgrading had provided additional definition of this process option, which could provide an interesting comparison.

09 BIOMASS FUELS↗

Life-cycle Analysis of Bioproducts and Their Conventional Counterparts in GREET

To further expand upon the literature in this field and to develop a platform for bioproduct LCA, we developed LCA results for ten bioproducts produced either from algal glycerol or from corn stover-derived sugars. We used Argonne National Laboratory’s Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREETTM) model as the platform for this study. The data and calculations reported herein are available to GREET users in a bioproducts module included in the fall 2015 GREET release. This report documents our approach to this analysis and the results. In Chapter 2, we review the process we underwent to select the bioproducts for analysis based on market and technology readiness criteria. In Chapter 3, we review key parameters for production of the two feedstocks we considered: corn stover and algae. Given the lack of publicly available information about the production of bioproducts, which is caused in large part by the emerging nature of the industry, we developed Aspen Plus® simulations of the processes that could be used to produce each bioproduct. From these simulations, we extracted the energy and material flows of these processes, which were important inputs to the GREET bioproducts module. Chapter 4 provides the details of these Aspen Plus simulations. It is important to compare the LCA results for bioproducts to those for their petroleum counterparts. We therefore also developed material and energy flow data for conventional products based mostly on the literature. These data are described in Chapter 5 and are also included in the GREET bioproducts module. In Chapter 6, we present results from this analysis and examine areas for refinement and future research.

59 BASIC BIOLOGICAL SCIENCES↗

Life Cycle Greenhouse Gas Emissions of By-product Hydrogen from Chlor-Alkali Plants

Current hydrogen production capacity in the U.S. is about 15.8 million tonne (or metric ton) per year (Brown 2016). Some of the hydrogen (2 million tonne) is combusted for its heating energy value, which makes total annual net production 13.8 million tonne (Table 1). If captive by-product hydrogen (3.3 million tonne) from catalytic reforming at oil refineries is excluded (Brown 2016; EIA 2008), approximately 11 million tonne is available from the conventional captive and merchant hydrogen market (DOE 2013). Captive hydrogen (owned by the refiner) is produced and consumed on site (e.g., process input at refineries), whereas merchant hydrogen is produced and sold as a commodity to external consumers. Whether it is merchant or captive, most hydrogen produced in the U.S. is on-purpose (not by-product)— around 10 million tonne/year.

08 HYDROGEN↗

Power Systems Life Cycle Analysis Tool (Power LCAT) Technical Guide

Power LCAT is a high-level dynamic model that calculates production costs and tracks environmental performance for a range of electricity generation technologies. This report summarizes key assumptions and results for version 2.0 of Power LCAT. This report has three goals: to explain the basic methodology used to calculate production costs and to estimate environmental performance; to provide a general overview of the model operation and initial results; and to demonstrate the wide range of options for conducting sensitivity analysis.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Multifunctional, Self-Healing Polyelectrolyte Gels for Long-Cycle-Life, High-Capacity Sulfur Cathodes in Li-S Batteries (FY2020 Final Report)

The project aims to develop polyelectrolyte gels consisting of partially crosslinked ionomer, interpenetrated with self-healing/polysulfide-trapping chains and swelled with a mixture of room temperature ionic liquid (RTIL) and lithium salt. To our knowledge, no other sulfur-based cathode design has combined self-healing behavior, polysulfide containment, and lithium dendrite suppression into a single design. We have demonstrated the benefits of multifunctional ionomer gel polyelectrolytes / gel cathodes with self-healing properties, as well as chemical modification of mesoporous carbons for S/C composite cathodes. Success of the proposed program of study would have wide ranging impact on the electric vehicle industry and society as a whole. A Li-S battery system with the capability of doubling lithium-ion energy density would enable the production of lighter, longer range electric vehicles at a cost that is affordable to the average U.S. household. The availability of such vehicles should lead to wide-ranging adoption over the coming years which, in combination with increased renewable electricity generation, will drastically decrease carbon emissions across the country and reduce U.S. dependency on fossil fuel sources.

25 ENERGY STORAGE↗

Life Cycle Inventories for Palladium on Niobium Phosphate (Pd/NbOPO 4 ) and Zirconium Oxide (ZrO 2 ) Catalysts

We report the cradle-to-gate GHG emissions, fossil fuel consumption, and water consumption for Nb 2 O 5 , KNbO 3 , NbOPO 4 , Pd, Pd/NbOPO 4 , ZrSiO 4 , and ZrO 2 . Notably, the net GHG emissions impact of the Pd/NbOPO 4 catalyst is 8.5 kg CO 2 e/kg catalyst, which is comparable to other catalysts in GREET, while the net GHG emissions of the ZrO 2 catalyst is considerably lower at 1.8 kg CO 2 e/kg catalyst. We also identify the primary contributors to each catalyst’s cradle-to-gate environmental burden. For the Pd/NbOPO 4 catalyst, Pd metal is the main driver of GHG emissions and fossil fuel consumption, while Pd and NbOPO 4 contribute almost equally to water consumption. For the ZrO 2 catalyst, sodium hydroxide (NaOH) is the principal driver of GHG emissions and fossil fuel consumption, while ZrSiO 4 is the main consumer of water. The Pd/NbOPO 4 and ZrO 2 catalysts, as well as Nb 2 O 5 , KNbO 3 , NbOPO 4 , and ZrSiO 4 , are implemented in the GREET catalyst module, and Pd has been implemented in GREET2 (Kingsbury and Benavides 2021). The material and energy flows for these new materials will be useful to future LCAs, particularly those involving biofuel production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon Dioxide Utilization Life Cycle Analysis Guidance for the U.S. DOE Office of Fossil Energy and Carbon Management (Version 2.0)

Capturing carbon dioxide (CO 2 ) and placing it in permanent storage in geologic formations is an option for reducing CO 2 emissions, but it may not be a viable one for all CO 2 emitters. For some, the added cost of capture may be too high to implement, or the geology near the source may not be suitable for storage. In these circumstances, other options will be needed. Carbon use and reuse, or CO 2 utilization (CO2U), is an alternative approach that seeks beneficial uses for captured CO 2 , such as using it as a feedstock in the production of fuels, chemicals, and building materials. These uses would give CO 2 value that could be used by suppliers (emitters) to offset capture costs. One of the principal features and challenges associated with CO2U is that the products derived from CO 2 must have lower carbon footprints than their conventional counterparts. Previous assessments of CO2U alternatives have focused on the carbon content of utilization products as an indicator of CO 2 equivalent (CO 2 e) emissions reduction potential. However, embodied emissions are—at best—only weakly correlated with the amount of carbon contained in any physical product. Therefore, the most attractive CO2U options will both displace the carbon in an existing product and improve the overall carbon efficiency of the manufacturing process. Research to overcome barriers will include identifying existing co-feeds and available low-carbon energy sources to enable the conversion of CO 2 to value-added products under favorable processing conditions. New discoveries in the fields of nano- and bio-technology will be applied to efficiently utilize CO 2 in new applications. Development of advanced materials and processes, integrating CO 2 capture with utilization processes (e.g., algae), exploring a diverse slate of products from CO 2 to effectively offset capture costs and developing processes based on waste energy are means to overcome these barriers. The research will lead to the development of advanced catalysts, materials, and equipment that can be used to convert CO 2 into useful products. The result will be multiple flexible and adaptable technology platforms that can be used to produce suites of products spanning multiple utilization pathways.

54 ENVIRONMENTAL SCIENCES↗

Life-cycle Analysis of Conversion of Post-Use Plastic via Pyrolysis with the GREET Model

In this report, we present an updated LCA of the PTF pathway developed at Argonne. Benavides et al. (2017) analyzed the environmental impact of producing ultra-low sulfur (ULS) diesel fuel from PUP via pyrolysis (the most common PTF technology). We used the Greenhouse gases, Regulated Emissions, and Energy use in Technologies (GREET®) model and collected data from eight PTF companies to assess the potential energy and environmental benefits associated with this technology (Argonne, 2020). We conducted a survey and aggregated the dataset based on the different responses, which included plant capacity, process yields, feedstock composition, material and energy inputs, and outputs, and other parameters. We calculated the energy, greenhouse gas (GHG) emissions, and water consumption of its intermediate product pyrolysis oil and final product PUP-derived ULS diesel and compared the results to those metrics for their conventional counterparts (crude naphtha and petroleum ULS diesel fuel).

10 SYNTHETIC FUELS↗