Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LANL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

SCALE Modeling of the Fast Spectrum Heat Pipe Reactor

As part of the severe accident analysis collaboration with Sandia National Laboratories (SNL) and the Nuclear Regulatory Commission (NRC), SCALE models were developed for a fast-spectrum heat pipe reactor. These models were based on the Idaho National Laboratory (INL) Design A concept, which is an alternative design to the Los Alamos National Laboratory (LANL) Special Purpose Reactor (SPR), also known as the Megapower reactor. The model contains 1,134 heat pipes, surrounded by hexagonal fuel elements, with a potassium working fluid; the fuel is UO 2 with 19.75 wt% 235 U enrichment. The model contains axial beryllium oxide (BeO) reflectors above and below the active fuel region along with a radial alumina reflector containing 12 B 4 C control drums. The center of the core is left unfueled to make room for two shutdown control rods, one annular and one solid. The active region of the core was discretized into twenty axial and five radial zones to analyze spatial variations in power and burnup. Infinite lattice unit cell sensitivity studies were used to perform verification between the SCALE and INL models. The eigenvalue results agreed well with the reported results to within roughly 50 percent mille (pcm). Full-core model verification was performed by analyzing system eigenvalues with differing configurations of control drum and shutdown rod positions. These full core results all had eigenvalue differences less than 310 pcm. Control drum and shutdown rod worths were also compared, with differences of 3.2% or less. Using the verified model, the isotopic inventory and decay heat, as well as temperature feedback coefficients, were calculated and provided to SNL as input to the MELCOR severe accident code to analyze potential releases from this class of reactor. The results of the MELCOR analysis are provided in a different report.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2022

Detection of Damage Inducing Impact Events in Vibration Test Fixtures Using Holder Exponents

The Shock and Vibration team within the Test Engineering group at Los Alamos National Laboratory (LANL) aids in the development and qualification of weapon systems for the United States Department of Energy (DOE). Performing tests that replicate shock and vibration environments representative of a weapon’s lifetime is critical in ensuring safety, survivability, and reliability. A key factor in shock and vibration testing is accurate representation of the weapon’s boundary conditions in its end use configuration. The boundary conditions representative of a reentry body in flight are particularly difficult to replicate on an electrodynamic shaker. When executing shock and vibration tests on a reentry body, two system axes are tested with the system in a cantilevered configuration. This cantilevered testing configuration results in a moment load being applied to the system while undergoing vibration environments. A special fixture, known as the Flex-Web, was developed to decouple this moment load from the reentry body in order to more accurately represent real world boundary conditions while replicating flight environments.

42 ENGINEERING↗
DOE OSTI2022

Fission Product Evaluation (Quarterly Report)

The LLNL team has developed a theoretical framework to compute the fission fragment charge and mass distributions of odd-mass nuclei, which can be formed in neutron-induced reactions on even-even nuclei. For example, n+ 238 U leads to the compound nucleus 239 U which has 147 neutrons. Odd-mass and odd-odd nuclei are spin-polarized: the spin of the nucleus is not equal to 0 as in even-even nuclei (a consequence of pairing correlations) but is in fact set by a single particle. In practice, that single particle can occupy different quantum-mechanical configurations, each with different spin. This affects the deformation properties of the nucleus and, as a result, the distribution of fission fragments. These distributions require two inputs for the calculation: a potential energy surface (= the total energy of the nucleus as a function of the deformation of the nuclear shape, often parametrized with 2 degrees of freedom) and the collective inertia tensor associated with each point of the PES. In an odd-mass or odd-odd nucleus, each quantity depends on the configuration of the single particle. We computed of the order of 20 to 30 different such configurations to extract the PES for spins K=1/2, 3/2, 5/2, 7/2, and 9/2 of 239 U. We then computed the primary yields for each such PES, as shown in Fig. 1 below. These yields were weighed with the spin distribution associated with the reaction 238 U+n and the resulting distribution used as input to FREYA to compute the independent yields shown in Fig. 2. These yields are then used as inputs to the FIER code to extract the cumulative yields and compare with LLNL-LANL measurements at TUNL.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

2022 Los Alamos National Laboratory Test and Analysis Abstracts

The abstracts included in this document are: Responsiveness, Modernization, and Radiography Test at the Centrifuge Test Facility; LANL Hostile Blast Testing Capability Development; Digital Image Correlation Measurement of B61 Center Case Fragmentation Test; and Collaborative Analysis Testing Techniques (CATT) Phase 1.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2022

Computational Physics Overview [Slides]

Computational physics is an important part of the overall investment in National Security Science at LANL. Computational physics is the study and implementation of numerical analysis to solve problems in physics for which a quantitative theory already exists. Historically, computational physics was the first application of modern computers in science. There are three key elements to computational physics: mathematical models of physical phenomena and conservation equations, computer codes that implement these models, and computer platforms that execute the code instructions and manipulate the data.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2022

Development of Carbon Molecular Sieves Hollow Fiber Membranes based on Polybenzimidazole Doped with Polyprotic Acids with Superior H 2 /CO 2 Separation Properties (Final Report)

The goal of this project was to develop a highly efficient membrane-based process to capture CO 2 from coal-derived syngas with 95% CO 2 purity, achieving the cost of electricity (COE) 30% below the baseline capture approaches (i.e., Selexol process) when coupled with the advancement in other areas of the power generation facility. Our core approach is based on high-permeance hollow fiber membranes (HFMs) with superior H 2 /CO 2 separation properties at the syngas process conditions, which can then be further utilized to design membrane reactors for process intensification of H 2 production and purification and CO 2 capture. Three organizations with complementary skills collaborated to achieve the goal, including the University at Buffalo (UB), Los Alamos National Laboratory (LANL), and Trimeric Corporation (Trimeric). We formulated logical steps to bring the membrane technology from Technology Readiness Level (TRL) 3 (Experimental proof of concept) to TRL 4 (Laboratory scale validation in relevant environment). During the budget period (BP) 1, we screened various polymeric materials and identified polybenzimidazole doped with inorganic polyprotic acids as the desirable platform. The acid doping increases the H 2 /CO 2 selectivity, and the sequential carbonization increases H 2 permeability while retaining the high selectivity. By manipulating the acid type and doping level and the carbonization temperature, we demonstrated advanced carbon molecular sieving (CMS) materials with H 2 permeability of above 200 Barrer (1 Barrer = 10 -10 cm 3 (STP) cm cm -2 s -2 cmHg -1 ) and H 2 /CO 2 selectivity of above 40 at 200-300°C with simulated syngas containing CO and water vapor. For example, the PBI-(H 3 PO 4 ) 0.11 carbonized at 700 °C exhibits H 2 permeability of 200 Barrer and H 2 /CO 2 selectivity of 60 at 200 °C, and H 2 permeability of 240 Barrer and H 2 /CO 2 selectivity of 54 at 225 °C, which meets the targeted properties and surpasses Robeson’s upper bound. During the BP2, we focused on the conversion of the advanced CMS materials to stable HFMs. Membranes with H 2 permeance of 1,090 GPU (1 GPU = 10 -6 cm 3 (STP) cm -2 s -2 cmHg -1 ) and H 2 /CO 2 selectivity of 57 at 300 °C were successfully fabricated. The effects of temperature, gas compositions, pressure, and time on the separation properties were systematically investigated. Pencil modules were continuously evaluated for 219 h (dry pure gas) and 669 h (dry simulated syngas) and showed initial decline in permeance and increased H 2 /CO 2 selectivity over time, ultimately achieving a steady state stable value, indicating that the ageing phenomena in the nanoporous structures of the membranes during the test. Membrane reactors were fabricated based on the CMS membranes and evaluated for water-gas shift (WGS) reaction. The use of membranes slightly improves the conversion of the CO. However, parametric tests of the membrane reactors at various temperatures and flow rates need to be conducted, as well as the membranes with improved separation performance. We performed a sensitivity analysis on the impact of H 2 /CO 2 selectivity on the COE based on a hybrid process of a membrane unit and cryogenic unit developed by Membrane Technology and Research, Inc. (MTR). Three H 2 /CO 2 selectivity (40, 60, and 15) cases were developed and compared with the baseline capture process (Case B5B) provided by the DOE report. Increasing the membrane H 2 /CO 2 selectivity reduces COE, but the rate of the decrease of COE also diminishes. The COE values for H 2 /CO 2 selectivities of 40 and 60 were nearly the same. As the H 2 /CO 2 selectivity increases, the inert recycling decreases, leading to smaller equipment, less auxiliary power requirements, and less heating, cooling, and refrigeration duty. The refrigeration system used to liquefy the CO 2 is the most expensive piece of equipment and consumes the most electricity within the CO 2 capture process. Increasing the CO 2 concentration in the recycle stream would improve the economics of the process by reducing the refrigeration duty requirement of the unit and also allow for higher liquefaction temperatures. The high H 2 -selective membrane developed by our team may be applicable in other separation processes where lower pressure H 2 retains value. Typically, hydrogen retains its pressure when it is separated from syngas components. Residual components may be used as low-quality fuel and then vented to the atmosphere. Applications might include control of H 2 /CO ratios or mitigation of the water gas shift reaction by CO 2 recycling to the feed of a gasifier or steam methane reformer. To summarize, we have developed industrial HFMs with the best H 2 /CO 2 separation performance reported in the literature. The membranes demonstrate stability with simulated syngas and show great potential for membrane reactors for WGS reactions, lowering the cost of blue H 2 production.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2021

Thermal Neutron Scattering Law (TNSL) Implementation and Testing in FUDGE

Thermal neutron scattering law processing capabilities have been recently implemented in the LLNL code FUDGE (For Updating Data and Generating Evaluations). FUDGE is now capable of producing processed TNSL data for use in Monte Carlo or deterministic transport. To test this new capability, LLNL scientists performed an extensive intercomparison between the Mercury, Ardra, COG and MCNP transport codes. This intercomparison helped probe differences between how TNSL data are handled by the transport codes and by two different processing codes (LLNL’s FUDGE and LANL’s NJOY). This report summarizes recent improvements in FUDGE TNSL capabilities as well as results from the code intercomparison.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Simulating physical and biogeochemical dynamics of the Arctic Ocean [Slides]

Ocean physics (currents, mixing, air-sea transfer of heat and gases) and biogeochemistry (carbon and oxygen cycles, ecosystem dynamics, nutrient distributions) are tightly coupled. We used the DOE-developed Energy Exascale Earth System Model (E3SM) to simulate physical and biogeochemical dynamics of the global ocean, with an emphasis on the western North Pacific. In particular, we used the grid refinement capability of E3SM’s ocean component (LANL-developed MPASOcean) to quantify the effect of model resolution on the carbon and oxygen cycles using a pair of century-long simulations that differ only in the western North Pacific grid. Regional grid refinement has a noticeable impact on biogeochemistry. Distribution of important nutrients (such as nitrate) changes the amount of photosynthesis by phytoplankton, which in turn affects air-sea transfer of CO2 and the local carbon cycle.

58 GEOSCIENCES↗
DOE OSTI2021

Correcting the PFNS for more consistent fission modeling

For FY20, we had a deliverable to write a report detailing efforts to simultaneously evaluate both the prompt neutron multiplicity, $\overline{ν}$, and the prompt neutron fission neutron spectrum, PFNS, using CGMF. CGMF is the LANL-developed fission fragment decay code that consistently evaporates prompt neutrons and γ rays using the Hauser-Feshbach statistical theory of compound reactions. The decay begins by constructing the initial conditions of the fission fragments, then decaying each one from the excited state by neutrons and γ rays, conserving energy, momentum, spin, and parity in each step of the emission. The initial conditions of the fragments, along with the multiplicity, energy, and direction of each emitted neutron or γ ray, are recorded, allowing for the full reconstruction of the fission event. These event histories allow us to reconstruct average quantities, as well as correlations between observables, that can be compared with experimental or evaluated data. In that initial report, although there was already a favorable comparison between $\overline{ν}$ from CGMF, experiment, and the current ENDF/B-VIII.0 evaluation, we showed that there was still significant work to be done to improve the PFNS from CGMF. Historically, the PFNS is calculated too soft by Hauser-Feshbach fission models, and CGMF is no exception. The incorrect shape presents a significant challenge in fission modeling, including for our understanding of the fission process and for our ability to consistently calculate and predict a variety of prompt fission observables (such as fission fragment initial conditions, neutron and γ-ray multiplicities and energies, and the correlations between all observables). In our companion report, we detail our success in using CGMF to evaluate $\overline{ν}$. Although not included in the optimization explicitly, we also keep the initial conditions of the fission fragments physical, along with reproducing reasonably well the neutron multiplicity distribution. As we would expect from the sensitivities calculations from, the average neutron energies change very little from the $\overline{ν}$ optimization along with the PFNS (as will be shown in Sec. 2.6). The conclusion was that the global and statistical models would have to be investigated instead of just the fission fragment initial conditions (as is sufficient for $\overline{ν}$). This report details those efforts.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

A Note on the Probability of Initiation Problem

The purpose of this note is to draw attention to Pál for his derivation of the Pál-Bell equation which is used by LLNL and LANL to model Probability of Initiation (POI) problems. Both laboratories credit the equation to Bell and Lee. Although the equation formulated by Bell and Lee and the equation derived by Pál appear to be the same, the equation by Bell and Lee is flawed. Scattering, which was absent in Bell’s original formulation of a POI problem, was later introduced by Bell and Lee by replacing a fission term with a scattering term. Such a replacement, however, leads to an incorrect average number $\overline{v}$ of neutrons that is produced in a fission event. By approaching a POI problem from probabilistic point of view, Pál formulates the problem as a branching process that i) describes the growth of a population of neutrons in a fissile medium, and ii) predicts $\overline{v}$ correctly. There are five reasons for writing this report. The first is to clarify the failing in Bell and Lee’s derivation. The second is to establish the origin of the equation used by the laboratories. The third is to elucidate the fixed point technique formulated by Mokhtar-Kharroubi to solve the Pál-Bell equation. The fourth is to derive the α eigenvalue that is associated with a super-critical situation. The fifth is to describe in the Appendix a second order positivity preserving technique that accelerates the convergence of the first order fixed point method developed by Mokhtar-Kharroubi.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

August @theBradbury

This content is for the LANL Discover website and a monthly email newsletter to members of the public.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

HR Recruitment banners Round 2 [Poster]

Series of banners designed for HR Office of Diversity and Strategic Staffing at LANL to be printed and used at recruitment events.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2022

Verification study of xRAGE’s multi-ion viscosity model

This report on the adequacy of the plasma viscosity model implemented in LANL’s ASC program code, xRAGE is organized as follows. Section I provides a brief introduction on the kinetic theory which underpins plasma viscosity, and Section II describes how plasma kinetic theory can be used to calculate plasma viscosity coefficients accurate within the hydrodynamic limit. Section III describes the existing model for calculating the plasma viscosity coefficient in xRAGE. Next, Section IV shows tests of the xRAGE viscosity model against established hydrodynamic theory in the case of binary and trinary plasma mixtures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Amendment to Programmatic Agreement among the U.S. Department of Energy, National Nuclear Security Administration, Los Alamos Field Office, the New Mexico State Historic Preservation Office and the Advisory Council on History Preservation Concerning Management of the Historic Properties of Los Alamos National Laboratory, Los Alamos, New Mexico (AGREEMENT)

The Field Office has a cultural resources program manager. The LANL Management and Operating Contractor has a staff of cultural resource specialists who meet the qualifications set forth in the Secretary of the Interior's Standards and Guidelines for Professional Qualifications (36 CFR Part 61), or work under the supervision of individuals who meet these qualifications. Any future Management and Operating Contractor will have a staff of Secretary of the Interior-qualified cultural resource specialists.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2022

Niowave Design and Analysis of a 200 kW Converter

LANL is providing support to Niowave Inc. on the design and analysis of a 200 kW converter. The current design of the 200 kW (40 MeV, 5 mA electron beam) converter consists of LBE flowing from the top to the bottom. When compared to the Mk.5 20 kW converter, which flowed LBE from the bottom, flowing over a divider plate to create a waterfall, the 200 kW converter eliminates the divider plate, which would otherwise have melted with the higher beam power. Because the LBE flows from the top to the bottom, alternate methods to the divider plate need to be utilized to ensure a stable flow that minimizes splashing at the bottom of the LBE waterfall, while maintaining a uniform LBE thickness at the beam, and steady LBE flow at the desired flow rate.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

An Overview of the EMRTC Complex-Terrain Dual-Tracer Experiment

LANL, in collaboration with LLNL, PNNL, Telops, University of Arizona, USARL, and EMRTC conducted exploratory atmospheric tracer experiments at EMRTC’s Field Laboratory in the nearby Socorro Mountains of New Mexico the first week of November, 2019.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Optimization of artificial viscosity in production codes based on Gaussian Regression surrogate models

To accurately model flows with shock waves using staggered-grid Lagrangian hydrodynamics, artificial viscosity has to be introduced to convert kinetic energy into internal energy, thereby increasing the entropy across shocks. Determining the appropriate strength of the artificial viscosity is an art and strongly depends on the particular problem and experience of the researcher. The objective of this study is to pose the problem of finding the appropriate strength of artificial viscosity as an optimization problem and solve this problem using machine learning (ML) tools, specifically using surrogate models based on Gaussian Process regression and Bayesian analysis. We describe the optimization method and discuss various practical details of its implementation. The shock-containing problems for which we apply this method all have been implemented in the LANL code FLAG. First, we apply ML to find optimal values to isolated shock problems of different strengths. Second, we apply ML to optimize viscosity for a 1D propagating detonation problem based on Zel’dovich-von Neumann-Doring (ZND) detonation theory using a reactive burn model. We compare results for default (currently used values in FLAG) and optimized values of artificial viscosity for these problems demonstrating the potential for significant improvement in the accuracy of computations.

42 ENGINEERING↗