Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Interplanetary Space”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Spectral evolution of the 5 March 1979 gamma burst

The spectral development of the intense gamma-ray burst observed on March 5, 1979 by nine spacecraft spaced on an interplanetary scale is discussed. As observed by the Pioneer Venus Orbiter detector, the hardness ratio of the burst, defined as the ratio between counts in the 100-1000 keV channels to those in the 50-100 keV channel, decreases during the very fast rise and subsequent 75 msec of the burst, consistent with a decrease in black-body temperature from 30 to 26 keV, and then increases during the shoulder on the gamma-ray burst light curve. Following the burst, the source was observed to exhibit many of the characteristics of a hard X-ray pulsar with a period of 8.0 sec and a hardness ratio varying in phase with the intensity. The observed characteristics of the pulsations are interpreted in terms of hot spots at the magnetic poles of a rotating neutron star, although it is shown that the simple cooling of residual hot spots does not completely explain the pulsations. Alternative explanations for the pulsation include accretion or an effect of beam geometry.

Fenimore, E. E.↗

Solar wind motion within 30 R solar masses - Spacecraft radio scintillation observations

New remote-sensing observations are reported of the solar wind motion within about 30 earth radii. Use is made of the interplanetary scintillation (IPS) spaced receiver technique with the radio source being a spacecraft signal (rather than a natural radio source as in previous spaced receiver studies). The spacecraft used are Helios A and B and the Viking orbiters. The purposes of the study are (1) to augment the scarce estimates of solar wind bulk flow speed near the sun and in the ecliptic with measurements made using spacecraft signals, and (2) to estimate random velocity components and identify the region where the random velocity is a significant fraction of the mean velocity. In addition, the radial evolution of speed and random velocity is compared with that of the plasma density fluctuation spectrum. Also reported are the first accurately normalized IPS scintillation index measurements using a monochromatic point source.

Armstrong, J. W.↗

Circulating transportation orbits between earth and Mars

This paper describes the basic characteristics of circulating (cyclical) orbit design as applied to round-trip transportation of crew and materials between earth and Mars in support of a sustained manned Mars Surface Base. The two main types of nonstopover circulating trajectories are the socalled VISIT orbits and the Up/Down Escalator orbits. Access to the large transportation facilities placed in these orbits is by way of taxi vehicles using hyperbolic rendezvous techniques during the successive encounters with earth and Mars. Specific examples of real trajectory data are presented in explanation of flight times, encounter frequency, hyperbolic velocities, closest approach distances, and Delta V maneuver requirements in both interplanetary and planetocentric space.

Friedlander, A. L.↗

Beyond the biosphere

The near-earth-space, planetary and interplanetary environments are described with emphasis on their biomedical significance. The characteristics of the microgravity field, low gravity and radiation conditions in earth orbit are described, noting the necessity of avoiding materials which can outgas toxic substances during long-term mission. Details of the atmospheres, global meteorology, and terrains of Venus, Mars, Jupiter, the Jovian satellites, and Saturn are reviewed. Finally, a brief discussion is provided of the life-support systems which will be required on interstellar voyages.

Nicogossian, A. E.↗

Physiological adaptation - Crew health in space

The experiments planned for the Spacelab Life Sciences-1 (SLS-1) Shuttle mission, which is dedicated to investigating biomedical issues pertinent to the man's presence in space, are discussed. The areas of research will include human and animal experiments concerned with the cardiovascular system, the vestibular apparatus, and metabolic experiments related to renal endocrine function, hematology, immune system, and muscle and bone/calcium metabolism, with particular attention given to the physiological complications resulting from short-duration space flight and subsequent return to the 1-G environment. The hardware systems to be used on the SLS-1 mission represent prototypes of systems to be developed for the medical and research facilities of the Space Station. The results of the experiments will be used to address issues related to long-duration space flight required for the Space Station and interplanetary travels.

Brand, Susan↗

A mobile transporter concept for EVA assembly of future spacecraft

This paper details the ground test program for the NASA Langley Research Center Mobile Transporter concept. The Mobile Transporter would assist EVA astronauts in the assembly of the Space Station Freedom. 1-g and simulated O-g (neutral buoyancy) tests were conducted to evaluate the use of the Mobile Transporter. A three-bay (44 struts) orthogonal tetrahedral truss configuration with a 15-foot-square cross section was repeatedly assembled by a single pair of pressure suited test subjects working from the Mobile Transporter astronaut positioning devices. The average unit assembly time was 28 seconds/strut. The results of these tests indicate that the use of a Mobile Transporter for EVA assembly of Space Station size structure is viable and practical. Additionally, the Mobile Transporter could be used to construct other spacecraft such as the submillimeter astronomical laboratory, space crane, and interplanetary (i.e., Mars and lunar) spacecraft.

Watson, Judith J.↗

Test facilities for high power electric propulsion

Electric propulsion has applications for orbit raising, maneuvering of large space systems, and interplanetary missions. These missions involve propulsion power levels from tenths to tens of megawatts, depending upon the application. General facility requirements for testing high power electric propulsion at the component and thrust systems level are defined. The characteristics and pumping capabilities of many large vacuum chambers in the United States are reviewed and compared with the requirements for high-power electric-propulsion testing.

Sovey, James S.↗

Test facilities for high power electric propulsion

Electric propulsion has applications for orbit raising, maneuvering of large space systems, and interplanetary missions. These missions involve propulsion power levels from tenths to tens of megawatts, depending upon the application. General facility requirements for testing high power electric propulsion at the component and thrust systems level are defined. The characteristics and pumping capabilities of many large vacuum chambers in the United States are reviewed and compared with the requirements for high power electric propulsion testing.

Sovey, James S.↗

Space engineering

Human productivity was studied for extravehicular tasks performed in microgravity, particularly including in-space assembly of truss structures and other large objects. Human factors research probed the anthropometric constraints imposed on microgravity task performance and the associated workstation design requirements. Anthropometric experiments included reach envelope tests conducted using the 3-D Acoustic Positioning System (3DAPS), which permitted measuring the range of reach possible for persons using foot restraints in neutral buoyancy, both with and without space suits. Much neutral buoyancy research was conducted using the support of water to simulate the weightlessness environment of space. It became clear over time that the anticipated EVA requirement associated with the Space Station and with in-space construction of interplanetary probes would heavily burden astronauts, and remotely operated robots (teleoperators) were increasingly considered to absorb the workload. Experience in human EVA productivity led naturally to teleoperation research into the remote performance of tasks through human controlled robots.

Alexander, Harold L.↗

Interplanetary Program to Optimize Simulated Trajectories (IPOST). Volume 2: Analytic manual

The Interplanetary Program to Optimize Space Trajectories (IPOST) is intended to support many analysis phases, from early interplanetary feasibility studies through spacecraft development and operations. The IPOST output provides information for sizing and understanding mission impacts related to propulsion, guidance, communications, sensor/actuators, payload, and other dynamic and geometric environments. IPOST models three degree of freedom trajectory events, such as launch/ascent, orbital coast, propulsive maneuvering (impulsive and finite burn), gravity assist, and atmospheric entry. Trajectory propagation is performed using a choice of Cowell, Encke, Multiconic, Onestep, or Conic methods. The user identifies a desired sequence of trajectory events, and selects which parameters are independent (controls) and dependent (targets), as well as other constraints and the cost function. Targeting and optimization is performed using the Stanford NPSOL algorithm. IPOST structure allows subproblems within a master optimization problem to aid in the general constrained parameter optimization solution. An alternate optimization method uses implicit simulation and collocation techniques.

Hong, P. E.↗

Derivation of particulate directional information from analysis of elliptical impact craters on LDEF

The Long Duration Exposure Facility provided a gravity gradient stabilized platform which allowed limited directional information to be derived from particle impact experiments. The morphology of impact craters on semi-infinite materials contains information which may be used to determine the direction of impact much more accurately. We demonstrate the applicability of this technique and present preliminary results of measurements from LDEF and modelling of interplanetary dust and space debris.

Newman, P. J.↗

Magnetospheric models for electron acceleration and transport in the heliosphere

Electron transport and acceleration processes in the earth's magnetosphere have correspondences to analogous processes affecting electrons in the solar magnetosphere (i.e., heliosphere). Energetic electrons in planetary magnetospheres and the heliosphere are test particles probing transport and acceleration dynamics with minimal effects on dominant magnetic field configurations. Parallels are discussed relating to electron entry into the magnetospheres from interplanetary and interstellar space, circulatory transport processes, and acceleration by electric fields in boundary regions including shocks and magnetotails.

Cooper, J. F.↗

High-Energy Space Propulsion Based on Magnetized Target Fusion

Magnetized target fusion is an approach in which a magnetized target plasma is compressed inertially by an imploding material wall. A high energy plasma liner may be used to produce the required implosion. The plasma liner is formed by the merging of a number of high momentum plasma jets converging towards the center of a sphere where two compact toroids have been introduced. Preliminary 3-D hydrodynamics modeling results using the SPHINX code of Los Alamos National Laboratory have been very encouraging and confirm earlier theoretical expectations. The concept appears ready for experimental exploration and plans for doing so are being pursued. In this talk, we explore conceptually how this innovative fusion approach could be packaged for space propulsion for interplanetary travel. We discuss the generally generic components of a baseline propulsion concept including the fusion engine, high velocity plasma accelerators, generators of compact toroids using conical theta pinches, magnetic nozzle, neutron absorption blanket, tritium reprocessing system, shock absorber, magnetohydrodynamic generator, capacitor pulsed power system, thermal management system, and micrometeorite shields.

Thio, Y. C. F.↗

Nutritional Support

Adequate nutritional status is critical for maintenance of crew health during extended- duration space flight and postflight rehabilitation. Nutrition issues relate to intake of required nutrients, physiological adaptation to weightlessness, psychological adaptation to extreme environments, and countermeasures to ameliorate the negative effects of space flight. Thus, defining the nutrient requirements for space flight and ensuring provision and intake of those nutrients are critical issues for crew health and mission success. Specialized nutritional requirements have only been considered for what are referred to here as extended- duration flights, i.e., those greater than 30 days in length. While adequate nutrition is important on the 1- to 3-week Shuttle flights, intakes of specific nutrients above or below space specific requirements for this period will not produce cause for concern. Thus, Shuttle flights have always used the recognized nutritional requirements for adult men and women. In this chapter, long-duration flights will be further differentiated into orbital missions (e.g., International Space Station) and interplanetary exploration missions.

Smith, Scott M.↗

Ultrasail

Ultrasail is a complete sail system for the launch, deployment, stabilization and control of very large solar sails enabling reduced mission times for interplanetary and deep space spacecraft. Ultrasail is an innovative, non-traditional approach to propulsion technology achieved by combining propulsion and control systems developed for formation-flying microsatellites with an innovative solar sail architecture to achieve sq km-class controllable sail areas, sail subsystem area densities of 1 gm per sq m, and thrust levels equivalent to 400 kW ion thruster systems used for comparable deep space missions. Ultrasail can conceivably even achieve outer planetary rendezvous, a deep space capability now reserved for high-mass nuclear and chemical systems. Ultrasail is a Delta IV-launched multi-blade spin-stabilized system with blade lengths as long as 50 km, reminiscent of the MacNeal Heliogyro. The primary innovation is the near-elimination of sail supporting structures by attaching the sail tip to a rigid formation-flying microsatellite truss which deploys the sail blade, and which then articulates the blade to provide attitude control, including spin stabilization and precession of the spin axis. These tip microsatellites are controlled by a solar-powered 3-axis microthruster system (electric or cold gas) to maintain proper sail film tension during deployment and spin-up. The satellite mass also provides a stabilizing centrifugal force on the blade while in rotation. Understanding the dynamics of individual blades is key to the overall dynamics of Ultrasail. Forces and torques that must be modeled include those due to solar pressure, those generated by the microsatellite at the blade tip and by torques applied at the blade root. Centrifugal forces also play a significant role in the deployment and maintenance of the sail configuration. To capture the dynamics of the overall system, the equations of motion for the blades have been derived. Using these differential equations, a control law will be derived to maneuver Ultrasail. This law involves the pitching of the individual blades thereby moving the distribution of the radiation pressure on each individual blade and inducing a resultant torque on the system. The direction of the angular momentum vector and its rate of precession can be controlled through the pitch angle of the blades. The Ultrasail trajectory is also being studied. Optimal or near-optimal trajectories are being generated to showcase Ultrasail performance. Various missions, e.g. outer planet and solar polar missions for observation of the Sun, are currently being investigated to demonstrate the performance enhancements generated by Ultrasail technology. Calculus-of-variations-based optimization software is used to produce optimal Ultrasail trajectories. The performance of these trajectories is being compared to optimal results generated with other propulsion models, including chemical propulsion, ion propulsion, and competing solar sail concepts. Results of these studies will quantify the performance of Ultrasail compared to existing solar sail concepts for high energy missions.

Burton, R.↗

Solar Wind and Interplanetary Disturbances

This report describes basic knowledge of solar wind and interplanetary disturbances first, and then it discussed recent results from new observations and theories. At the end it presented research activities to predict interplanetary disturbances for space weather forecast.

Watari, Shinichi↗

System Mass Variation and Entropy Generation in 100k We Closed-Brayton-Cycle Space Power Systems

State-of-the-art closed-Brayton-cycle (CBC) space power systems were modeled to study performance trends in a trade space characteristic of interplanetary orbiters. For working-fluid molar masses of 48.6, 39.9, and 11.9 kg/kmol, peak system pressures of 1.38 and 3.0 MPa and compressor pressure ratios ranging from 1.6 to 2.4, total system masses were estimated. System mass increased as peak operating pressure increased for all compressor pressure ratios and molar mass values examined. Minimum mass point comparison between 72 percent He at 1.38 MPa peak and 94 percent He at 3.0 MPa peak showed an increase in system mass of 14 percent. Converter flow loop entropy generation rates were calculated for 1.38 and 3.0 MPa peak pressure cases. Physical system behavior was approximated using a pedigreed NASA Glenn modeling code, Closed Cycle Engine Program (CCEP), which included realistic performance prediction for heat exchangers, radiators and turbomachinery.

Barrett, Michael J.↗