Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hydride”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Nuclear Brayton turboalternator-compressor (TAC) conceptual design study

A comprehensive analysis and conceptual design study of the turboalternator-compressor components was performed using HeXe as the working fluid. Individual turbine, alternator, compressor, and bearing and seal designs were evaluated. Six turboalternator-compressor TAC configurations were completed. One TAC configuration was evaluated to calculate its performance when operating under new cycle conditions,namely, one higher and one lower turbine inlet temperature and one case with krypton as the working fluid. Based on the results, a TAC configuration that incorporated a radial compressor, a radial turbine, a Lundell Alternator, and gas bearings was selected. A new layout of the TAC was prepared that reflects the cycle state points necessary to accommodate a zirconium hydride moderated reactor and a 400 Hz alternator. The final TAC design rotates at 24,000 rpm and produces 160 kWe, 480V, 3-phase, 400 hertz power.

Mock, E. A.↗
NASA NTRS1972

Optimal speed sharing characteristics of a series-hybrid bearing

A series-hybrid bearing assembly consisting of a conical hydrostatic fluid-film bearing and a ball bearing is described. Computer studies are used to predict friction torque and life characteristics of a 150-millimeter ball bearing. A conical hydrostatic fluid-film bearing is designed for minimum friction and maximum speed reduction of the ball-bearing component of the series-hydrid bearing. At a thrust load of 4000 pounds and speeds corresponding to DN (bearing bore in millimeters times shaft speed in rpm) values of 3 and 4 million, ball-bearing speed may be reduced by 30 percent. This speed reduction corresponds to ball-bearing fatigue life improvement factors of 3.4 at 3 million DN and 5.9 at 4 million DN. An oil flow rate of 18.2 pounds per minute is required to maintain a fluid-film thickness of 0.001 inch in the hydrostatic bearing.

Nypan, L. J.↗
NASA NTRS1972

A discussion of CO and O on Venus and Mars

The absorption of solar ultraviolet radiation in the wavelength range 2000 to 2200 A by CO2 strongly reduces the dissociation rate of HCl on Venus. The Cl catalytic reaction for the rapid recombination of O and CO and the yellow coloration of the Venus haze by OCl(-) and Cl3(-) appears to be unlikely. At the time of the Martian dust storm, the dissociation of H2O in the vicinity of the surface may vanish. The increase of dissociation at high altitudes, however, can be the source of H atoms in the upper atmosphere. The H atoms from the dissociation of hydrides may catalyze the recombination of CO and O in the lower atmospheres of these planets according to the following scheme: H + CO + M yields HCO + M, and HCO + O yields H + CO2. In the case of Venus, there may be other kinds of sinks for the photodissociation products, and its chemical environment might be more complex than that of Mars.

Shimizu, M.↗
NASA NTRS1972

The formation of interstellar diatomic molecules

Reactions between atoms and ions of the interstellar medium and vibrationally excited molecular hydrogen are shown to produce a specific set of molecules. Molecules such as CO and CN can readily be produced in abundances greater than those of corresponding hydrides. When quantified in a simple manner the equilibrium density of molecules compares well with the observed values for the star Oph.

Stecher, T. P.↗
NASA NTRS1972

Manned space flight nuclear system safety. Volume 1: Executive summary. Part 2: Space shuttle nuclear system safety

The nuclear safety integration and operational aspects of transporting nuclear payloads to and from an earth orbiting space base by space shuttle are discussed. The representative payloads considered were: (1) zirconium hydride-Brayton power module, (2) isotope-Brayton power module, and (3) small isotope power systems or heat sources. Areas of investigation also include nuclear safety related integration and packaging as well as operational requirements for the shuttle and payload systems for all phases of the mission.

Source record↗
NASA NTRS1972

A small, 1400 K, reactor for Brayton space power systems.

An investigation was conducted to determine minimum dimensions and minimum weight obtainable in a design for a reactor using uranium-233 nitride or plutonium-239 nitride as fuel. Such a reactor had been considered by Krasner et al. (1971). Present space power status is discussed, together with questions of reactor design and power distribution in the reactor. The characteristics of various reactor types are compared, giving attention also to a zirconium hydride reactor.

Lantz, E.↗
NASA NTRS1972

Gaseous hydrogen-induced cracking of Ti-5Al-2.5Sn.

Study of the kinetics of hydrogen-induced cracking in the Ti-5Al-2.5Sn titanium alloy, which has a structure of acicular alpha platelets in a beta matrix. The crack-growth rate at low stress-intensity levels was found to be exponentially dependent on stress intensity but essentially independent of temperature. The crack-growth rate at intermediate stress-intensity levels was found to be independent of stress intensity but dependent on temperature in such a way that crack-growth rate was controlled by a thermally activated mechanism having an activation energy of 5500 cal/mole and varied as the square root of the hydrogen pressure. The crack-growth rate at stress-intensity levels very near the fracture toughness is presumed to be independent of environment. The results are interpreted to suggest that crack growth at high stress intensities is controlled by normal, bulk failure mechanisms such as void coalescence and the like. At intermediate stress-intensity levels the transport of hydrogen to some interaction site along the alpha-beta boundary is the rate-controlling mechanism. The crack-growth behavior at low stress intensities suggests that the hydrogen interacts at this site to produce a strain-induced hydride which, in turn, induces crack growth by restricting plastic flow at the crack tip.

Williams, D. P.↗
NASA NTRS1972

Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 1: Reference Design Document (RDD)

The Reference Design Document, of the Preliminary Safety Analysis Report (PSAR) - Reactor System provides the basic design and operations data used in the nuclear safety analysis of the Rector Power Module as applied to a Space Base program. A description of the power module systems, facilities, launch vehicle and mission operations, as defined in NASA Phase A Space Base studies is included. Each of two Zirconium Hydride Reactor Brayton power modules provides 50 kWe for the nominal 50 man Space Base. The INT-21 is the prime launch vehicle. Resupply to the 500 km orbit over the ten year mission is provided by the Space Shuttle. At the end of the power module lifetime (nominally five years), a reactor disposal system is deployed for boost into a 990 km high altitude (long decay time) earth orbit.

Source record↗
NASA NTRS1972

Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 2: Accident Model Document (AMD)

The Accident Model Document is one of three documents of the Preliminary Safety Analysis Report (PSAR) - Reactor System as applied to a Space Base Program. Potential terrestrial nuclear hazards involving the zirconium hydride reactor-Brayton power module are identified for all phases of the Space Base program. The accidents/events that give rise to the hazards are defined and abort sequence trees are developed to determine the sequence of events leading to the hazard and the associated probabilities of occurence. Source terms are calculated to determine the magnitude of the hazards. The above data is used in the mission accident analysis to determine the most probable and significant accidents/events in each mission phase. The only significant hazards during the prelaunch and launch ascent phases of the mission are those which arise form criticality accidents. Fission product inventories during this time period were found to be very low due to very limited low power acceptance testing.

Source record↗
NASA NTRS1972

Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 2A: Accident model document, appendix

The detailed abort sequence trees for the reference zirconium hydride (ZrH) reactor power module that have been generated for each phase of the reference Space Base program mission are presented. The trees are graphical representations of causal sequences. Each tree begins with the phase identification and the dichotomy between success and failure. The success branch shows the mission phase objective as being achieved. The failure branch is subdivided, as conditions require, into various primary initiating abort conditions.

Source record↗
NASA NTRS1972

Manned space flight nuclear system safety. Volume 4: Space shuttle nuclear system transportation. Part 1: Space shuttle nuclear safety

An analysis of the nuclear safety aspects (design and operational considerations) in the transport of nuclear payloads to and from earth orbit by the space shuttle is presented. Three representative nuclear payloads used in the study were: (1) the zirconium hydride reactor Brayton power module, (2) the large isotope Brayton power system and (3) small isotopic heat sources which can be a part of an upper stage or part of a logistics module. Reference data on the space shuttle and nuclear payloads are presented in an appendix. Safety oriented design and operational requirements were identified to integrate the nuclear payloads in the shuttle mission. Contingency situations were discussed and operations and design features were recommended to minimize the nuclear hazards. The study indicates the safety, design and operational advantages in the use of a nuclear payload transfer module. The transfer module can provide many of the safety related support functions (blast and fragmentation protection, environmental control, payload ejection) minimizing the direct impact on the shuttle.

Source record↗
NASA NTRS1973

S8DR shield examination

The SNAP 8 developmental reactor lithium hydride shield was examined after being irradiated for over 7000 hours at relatively low temperature. A crack was located in the seam weld of the containment vessel, probably the result of hot short cracking under thermal stress. The LiH was visually examined at two locations and its appearance was typical of low temperature irradiated LiH. The adherence of the chrome oxide emittance coating was found to be excellent.

Mason, D. G.↗
NASA NTRS1973

Feasibility of an on-line fission-gas-leak detection system

Calculations were made to determine if a cladding failure could be detected in a 100-kW zirconium hydride reactor primary system by monitoring the highly radioactive NaK coolant for the presence of I-131. The system is to be completely sealed. A leak of 0.01 percent from a single fuel pin was postulated. The 0.364-MeV gamma of I-131 could be monitored on an almost continuous basis, while its presence could be varified by using a longer counting time for the 0.638-MeV gamma. A lithium-drifted germanium detector would eliminate radioactive corrosion product interference that could occur with a sodium iodide scintillation detector.

Lustig, P. H.↗
NASA NTRS1972

Preliminary design of reactor power systems for the manned space base.

The results of design integration studies of uranium-zirconium hydride (UZr-Hx) reactor power systems for the NASA space base study program are presented. The power conversion systems investigated include the Brayton cycle, the organic Rankine cycle, the SNAP-8 mercury Rankine cycle, and thermoelectric (PbTe). The proposed space base has a 10-year life and requires 100 kWe of power. Two 50-kWe power systems with a nominal replacement life of 5 years are utilized. Parametric design data such as life, weight, radiator area, reactor outlet-temperature, reactor thermal power, and power conversion system efficiency are presented and used for the design and integration of the system with the space base.

Mckhann, G. G.↗
NASA NTRS1974

Testing for hydrogen environment embrittlement - Primary and secondary influences

A somewhat phenomological overview of the hydrogen embrittlement process, both internal as well as external, is presented in a effort to make more clear the type of parameters which must be considered in the selection of a test method and test procedure so that the resulting data may be meaningfully applied to real engineering structures. What are believed to be the three primary influences on the embrittlement process are considered - the original location and form of the hydrogen, the transport reactions involved in the transport of hydrogen from its origin to some point it can interact with the metal to cause embrittlement, and the embrittlement interaction itself. Additionally, a few of the large number of secondary influences on the embrittlement process are discussed, for example, the influence of impurity species in the environment, surface hydride films, and surface oxide films.

Nelson, H. G.↗
NASA NTRS1973

Molecule formation by inverse predissociation

The general theory of inverse predissociation is described, and is applied to specific molecules. The list of molecules which can be formed by radiative association will be lengthened considerably by considering this phenomenon. Typical rate constants for diatoms will lie in the range 10 to the minus 16th power to 10 to the minus 20th power cu cm/sec/molecule, with the heavy atom molecules such as CN, CO, or NO generally having larger rates than the hydrides. An attempt is made to point out what molecular characteristics determine the radiative association rate and also to make estimates of what rates may be expected for various interstellar molecules. The formal theory is developed, and the molecular properties are discussed which determine the inverse predissociation rate. The details of the theory as applied to specific interstellar molecules are studied.

Julienne, P. S.↗
NASA NTRS1975

A film-rupture model of hydrogen-induced, slow crack growth in alpha-beta titanium

The appearance of the terrace like fracture morphology of gaseous hydrogen induced crack growth in acicular alpha-beta titanium alloys is discussed as a function of specimen configuration, magnitude of applied stress intensity, test temperature, and hydrogen pressure. Although the overall appearance of the terrace structure remained essentially unchanged, a distinguishable variation is found in the size of the individual terrace steps, and step size is found to be inversely dependent upon the rate of hydrogen induced slow crack growth. Additionally, this inverse relationship is independent of all the variables investigated. These observations are quantitatively discussed in terms of the formation and growth of a thin hydride film along the alpha-beta boundaries and a qualitative model for hydrogen induced slow crack growth is presented, based on the film-rupture model of stress corrosion cracking.

Nelson, H. G.↗
NASA NTRS1975

Spectroradiometric calibration techniques in the far ultraviolet - A stable emission source for the Lyman bands of molecular hydrogen

The problems associated with making accurate spectroradiometric measurements in the far UV region are sketched briefly. The equipment and methods that were developed for providing absolute sensitivity calibration of an Apollo 17 far UV spectrometer are described. The absolute reference standards were photoelectric diodes calibrated at the National Bureau of Standards. A complete vacuum optical facility, which included a premonochromator and stable UV light sources, was developed to calibrate the Apollo 17 instrument, and it has been used for a number of other tasks. Absolute radiometric calibrations between about 1200 and 1700 A were performed with an absolute accuracy of + or - 10%. The light source, which was designed to provide a very stable light output, is a low-pressure molecular hydrogen lamp in which the pressure is stabilized by thermal control of uranium hydride powder.-

Fastie, W. G.↗