SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
High resolution dynamic spectra of solar emissions in the range 80 to 20 MHz are discussed. The major features of observations described are (1) decametric storms, (2) type 3 bursts, and (3) time profile of type 3 bursts.
The exploration of the interplanetary medium and the magnetospheres of the outer planets requires the implementation of magnetic field measuring instrumentation with wide dynamic range, high stability, and reliability. The fluxgate magnetometers developed for the Pioneer 11 and Mariner-Jupiter-Saturn missions are presented. These instruments cover the range of .01 nT to 2 million nT with optimum performance characteristics and low power consumption.
A study program was undertaken to investigate various concepts and techniques for identifying and simulating both the steady-state and dynamic characteristics of electrical loads for use during integrated system test and evaluation. The development of hardware capable of providing the simulation capability is discussed. A general purpose simulator was developed with the capability of realizing a variety of models where element values were discretely variable. The different models, each corresponding to real spacecraft equipment, are set up manually for each case by suitable switching and patching. The models are capable of duplicating the dynamic and steady-state response of real loads at full power.
During the time period 1961-1972, 11 magnetometers were sent to the moon. The primary purpose of this paper is to review the results of lunar magnetometer data analysis, with emphasis on the lunar interior. Magnetic fields have been measured on the lunar surface at the Apollo 12, 14, 15, and 16 landing sites. The remanent field values at these sites are 38, 103 (maximum), 3, and 327 gammas (maximum), respectively. Simultaneous magnetic field and solar plasma pressure measurements show that the Apollo 12 and 16 remanent fields are compressed during times of high plasma dynamic pressure. Apollo 15 and 16 subsatellite magnetometers have mapped in detail the field above portions of the lunar surface and have placed an upper limit on the global permanent dipole moment. Satellite and surface measurements show strong evidence that the lunar crust is magnetized over much of the lunar globe. Magnetic fields are stronger in highland regions than in mare regions and stronger on the lunar far side than on the near side. The largest magnetic anomaly measured to date is between the craters Van de Graaff and Aitken on the lunar far side.
The potential effects of fly by wire and control configured vehicle concepts on flying qualities are considered. Failure mode probabilities and consequences, controllability, and dynamics of highly augmented aircraft are among the factors discussed in terms of design criteria.
A model is outlined in which the origin of Mercury's magnetic field is attributed to electromagnetic induction from the interplanetary magnetic field. Both transverse magnetic (TM) and transverse electric (TE) induction are considered. It is found that neither mode can produce a totally detached magnetopause, so the highly nonlinear dynamics of magnetopausal flux deflection is investigated as a potential inhibitor of the decaying tendency of linear induction. No mechanism is discovered which can account for the large distance of the magnetopause, its temporal stability, and the orientation of the magnetic field. It is shown that the stochastic trapped-field TE model comes close to fulfilling these requirements, but cannot explain the Mariner 10 observations of Mercury's field. Noting the potential difficulties of the convective magnetic dynamo model, it is concluded that the source of Mercury's field is still poorly understood.
The effect of operating parameters on the performance of the hyperfiltration membrane when operating on washwater was examined. The parameters were pressure, temperature, velocity, and concentration. Data taken included rejections of organic materials, ammonia, urea, and an assortment of ions. The membrane used was a dual layer, polyacrylic acid over zirconium oxide, deposited in situ on a porcelain ceramic substrate.
The paper examines the correlation between magnetospheric substorms as inferred from the AE(11) index and the occurrence of terrestrial kilometric radiation (TKR) as observed by the Goddard radio astronomy experiment on board the Imp 6 spacecraft. It is suggested that many TKR events begin at low altitudes and high frequencies (approximately 400 - 500 kHz) and spread to higher altitudes and lower frequencies as the substorm expands. AE and TKR are well correlated for observations in the 1500-300 MLT zone and poorly correlated for the complementary zone. High-resolution dynamic spectra obtained during periods of isolated substorms are described; the substorm expansion phase corresponds to a rapid intensification and bandwidth increase of TKR.
Analysis of the Dynamics Explorer high orbiter spacecraft showed that the proposed louver system, along with existing radiator heat rejection areas on the S/C surface were insufficient to safely control the S/C's thermal excursions caused by highly varying internal power levels and solar input angles. A variable conductance heat pipe system in conjunction with a conventional radial heat pipe system was designed, built, tested, and shown to resolve this problem. The conventional pipes, radial, spinning at 10 rpm were required to carry 35 watts each after experiencing despin from 80 rpm. The VCHPs attached to the radial pipes at the S/C perimeter distributed the excess energy via a finned radiator attached around the S/C's center.
Solid-state low-temperature elastic properties have been experimentally studied at the NBS Cryogenic Division for four years. Most studies were between room temperature and liquid-helium temperature; some were only to liquid-nitrogen temperature. Two dynamic (high-frequency) experimental methods were used, pulse-echo and resonance, resulting in adiabatic elastic constants. The present paper reviews these studies for 47 technological materials - metals, alloys, and composites. The elastic constants primarily discussed are Young's modulus, the shear modulus, the bulk modulus (reciprocal compressibility), and Poisson's ratio. A summary table is presented to show which base metals tend to exhibit regular, irregular, or anomalous behavior in their elastic constant/temperature curves.
A new treatment of the energetics of resistive magnetic tearing is presented. This instability is the only known field-reconnection mechanism which develops in time, and is thus a primary candidate for a number of astrophysical 'flare' processes occurring in stressed magnetic fields. The tearing process is elucidated by a subdivision into magnetic regions of different characteristics: first, as dominated by resistive or highly conductive dynamics, and then by function as a source or sink of the energy flux. Matching conditions between these zones provide a determination of the growth rate and its physical-parameter dependence. The observable plasma energy outputs, due mainly to two distinct magnetically driven acceleration mechanisms, are estimated and their directive spatial properties shown. Finally, the generality of resistive tearing is demonstrated by an application of the previous considerations to realistic sheared-field configurations, including the case of a solar coronal loop, for which flare-instability thresholds and energy-deposition sites are described.
Research on bearings, gears, seals, and rotor dynamics (specifically high speed balancing and dampers) is presented. The research pertains to problems in both aircraft turbine engines and helicopter transmissions.
A lambda matrix solution technique is being developed to perform an open loop frequency analysis of a high order dynamic system. The procedure evaluates the right and left latent vectors corresponding to the respective latent roots. The latent vectors are used to evaluate the partial fraction expansion formulation required to compute the flexible body open loop feedback gains for the Space Shuttle Digital Ascent Flight Control System. The algorithm is in the final stages of development and will be used to insure that the feedback gains meet the design specification.
An asymmetric rotor (19N; 4.3 lb), supported radially and axially by compliant bearings is subjected to severe excitation by rotating unbalance in the 'pitching' mode at speeds to 50,000 rpm. The resilient, air-lubricated bearings provide very effective damping, so that regions of resonance and instability can be traversed with amplitudes and limit-trajectories within acceptable bounds. A novel journal bearing is introduced, in which a resilient support is furnished by the outer turn of the coiled foil-element bent to form an open polygon. The experimental apparatus and procedure are described, and the response of the rotor and flexible support system are documented by oscilloscope records of motion.
The theory of geostrophic adjustment in which the adjustment process is critically dependent on the ratio of the scale size of the forcing to the Rossby radius of deformation, is applied to the qualitative explanation of certain features of the response of the high latitude thermosphere to inputs of energy and momentum. When the ratio is small, large wind speeds are efficiently generated by a momentum source, and when small, changes in the mass field associated with a heat source are more effectively produced. The Rossby radius variation with height explains the qualitatively different responses of the high latitude E and F regions during disturbed geomagnetic conditions as shown by both observations and numerical models. The present analytic solutions are in good agreement with model results concerning energy apportionment between divergent and rotational components of the wind field as a function of wavenumber.
This paper recounts the significant events which took place during the structural verification testing of two graphite/epoxy material, full-size vertical stabilizers. The ground test articles were tested to a high bending dynamic lateral gust condition. The first unit failed during static testing at 98 percent Design Ultimate Load. Failure began within the front spar cap. A detailed review of the failure was performed to identify all possible modes. This review resulted in a 'production line' type fix being designed for incorporation in the second ground test article prior to installation in the test fixture. The modified second unit sustained 106 percent of Design Ultimate Load without incident. One lifetime (36,000 flights) of damage tolerance testing was accomplished with the specimen purposely damaged at five locations. A fail-safe loading was performed successfully after simulating lightning strike damage to the fin box cover. A large area repair was substantiated by completing a second lifetime of spectrum loadings. The residual static strength was determined to be 119.7 percent of Design Ultimate Load.
A Differential Global Positioning System (DGPS) computer simulation was developed, to provide a versatile tool for assessing DGPS referenced civil helicopter navigation. The civil helicopter community will probably be an early user of the GPS capability because of the unique mission requirements which include offshore exploration and low altitude transport into remote areas not currently served by ground based Navaids. The Monte Carlo simulation provided a sufficiently high fidelity dynamic motion and propagation environment to enable accurate comparisons of alternative differential GPS implementations and navigation filter tradeoffs. The analyst has provided the capability to adjust most aspects of the system, the helicopter flight profile, the receiver Kalman filter, and the signal propagation environment to assess differential GPS performance and parameter sensitivities. Preliminary analysis was conducted to evaluate alternative implementations of the differential navigation algorithm in both the position and measurement domain. Results are presented to show that significant performance gains are achieved when compared with conventional GPS but that differences due to DGPS implementation techniques were small. System performance was relatively insensitive to the update rates of the error correction information.
A number of major challenges were faced in the design and development of the Orbiter Active Thermal Control Subsystem (ATCS). At the system level, the initial challenges were to define an approach that would interface dual Freon coolant loops with multiple coolant loops from other vehicle subsystems with the lowest weight penalty to the Orbiter; and to provide highly responsive vehicle heat rejection throughout all of the Orbiter mission phases. Optimized heat exchangers, representing an advance in the state-of-the-art in heat exchanger design, were developed to transfer heat between the orbiter Freon coolant loops and five other vehicle systems. Flash evaporation was selected as a highly efficient and responsive means for cooling the Orbiter Freon loops during ascent and entry. The Flash Evaporator Subsystem (FES) utilizes cyclic water spray cooling in a chamber maintained at or below the water triple point pressure. A summary of the basic heat transfer research conducted to identify the fundamental heat transfer processes involved in water spray cooling in support of the FES design is given. The high fidelity dynamic analytical model of the FES that was generated to aid in the design of control logic, evaluate performance and simulate ground test and flight anomalies is discussed. A description of the FES and Integrated ATCS testing conducted in the SESL chamber A at NASA-JSC is also presented.