Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HYPOTHESIS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Dynamic and single cell characterization of a CRISPR-interference toolset in Pseudomonas putida KT2440 for β-ketoadipate production from p -coumarate

We report Pseudomonas putida KT2440 is a well-studied bacterium for the conversion of lignin-derived aromatic compounds to bioproducts. The development of advanced genetic tools in P. putida has reduced the turnaround time for hypothesis testing and enabled the construction of strains capable of producing various products of interest. Here, we evaluate an inducible CRISPR-interference (CRISPRi) toolset on fluorescent, essential, and metabolic targets. Nuclease-deficient Cas9 (dCas9) expressed with the arabinose (8K)-inducible promoter was shown to be tightly regulated across various media conditions and when targeting essential genes. In addition to bulk growth data, single cell time lapse microscopy was conducted, which revealed intrinsic heterogeneity in knockdown rate within an isoclonal population. The dynamics of knockdown were studied across genomic targets in exponentially-growing cells, revealing a universal 1.75 ± 0.38 hour quiescent phase after induction where 1.5 ± 0.35 doublings occur before a phenotypic response is observed. To demonstrate application of this CRISPRi toolset, β-ketoadipate, a monomer for performance-advantaged nylon, was produced at a 4.39 ± 0.5 g/L and yield of 0.76 ± 0.10 mol/mol from p-coumarate, a hydroxycinnamic acid that can be derived from grasses. These cultivation metrics were achieved by using the higher strength IPTG (1K)-inducible promoter to knockdown the pcaIJ operon in the βKA pathway during early exponential phase. This allowed the majority of the carbon to be shunted into the desired product while eliminating the need for a supplemental carbon and energy source to support growth and maintenance.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Inactivation of multiple human pathogens by Fathhome's dry sanitizer device: Rapid and eco-friendly ozone-based disinfection

SARS-CoV-2 spread rapidly, causing millions of deaths across the globe. As a result, demand for medical supplies and personal protective equipment (PPE) surged and supplies dwindled. Separate entirely, hospital-acquired infections have become commonplace and challenging to treat. To explore the potential of novel sterilization techniques, this study evaluated the disinfection efficacy of Fathhome's ozone-based, dry-sanitizing device by dose and time response. Inactivation of human pathogens was tested on non-porous (plastic) surfaces. 95.42-100% inactivation was observed across all types of vegetative microorganisms and 27.36% inactivation of bacterial endospores tested, with no residual ozone detectable after completion. These results strongly support the hypothesis that Fathhome's commercial implementation of gas-based disinfection is suitable for rapid decontamination of a wide variety of pathogens on PPE and other industrially relevant materials.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Influence of elevated temperature and oxygen on the capture of radioactive iodine by silver functionalized silica aerogel

Reprocessing is considered a competent strategy for spent nuclear fuel management, yet radioiodine ( 129 I) is emitted in reprocessing off-gas as a hazardous byproduct. Silver functionalized silica aerogel (Ag 0 -aerogel), a promising iodine capture material, experiences a reduction in its capacity after prolonged exposure to off-gas components at elevated temperatures, a phenomenon termed as aging. To fully understand this process, we isolated the contribution of each aging factor, exposing Ag 0 -aerogel samples to N 2 and dry air gas streams, respectively, at 150 °C for different time periods. Aged samples were loaded with I 2 to examine the capacity change and comprehensively characterized to investigate the evolution of their properties. Results show that temperature alone did not alter Ag 0 -aerogel's capacity but triggered Ag 0 nanoparticles sintering and generated organic sulfur species. The presence of O 2 reduced the capacity by ~20 %, causing (i) formation of silver sulfide (Ag 2 S) crystals and (ii) oxidation of Ag-thiolate (Ag-S-r) to Ag sulfonate (Ag-SO 3 -r). Given that Ag 2 S readily adsorbs I 2 , the formation of Ag-SO 3 -r is the major inhibitor for iodine adsorption. This hypothesis was supported by density functional theory (DFT) simulations. These findings unraveled key mechanisms of Ag 0 -aerogel aging, which are useful in the development of materials that withstand realistic spent-nuclear-fuel-reprocessing off-gas conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

The apparent reversal of the Law of Mass Action in concentrated multicomponent aqueous solutions

Although it is well known that aqueous electrolyte solutions behave non-ideally, few are so non-ideal that adding an electrolyte to a saturated solution with a common ion enhances rather than depresses solubility. Nonetheless, this apparent reversal of the Law of Mass Action (LMA) has been observed in simple nitrate solutions at high concentrations. A leading hypothesis is that ion clusters are formed and stabilized by ions having different charge densities. We report the present study examines this concept, in part by reviewing relevant data from multicomponent aqueous solutions containing sodium nitrate (NaNO 3 ), sodium nitrite (NaNO 2 ), sodium hydroxide (NaOH), and sodium aluminate (NaAl(OH) 4 ) - the major constituents in alkaline nuclear waste. Here, NaOH and NaAl(OH) 4 did not enhance the solubility of NaNO 3 or NaNO 2 , whereas NaNO 2 and NaNO 3 enhanced rather than depressed the solubility of each other despite each having the sodium cation (Na + ) in common. Solutions evaluated in this study have more than 20 molal total Na + concentration, and most have less than one mole of water per mole of ion. Thus, this reversal of the LMA occurs in solutions where there is not enough water to fully hydrate the ions, pointing to the importance of ion cluster formation. Within the composition range of the solutions analyzed here, this reversal of the LMA occurs regardless of NaAl(OH) 4 and NaOH concentrations. Elevated temperatures also result in the reversal of the LMA in the subsystems NaNO 2 -NaNO 3 -H 2 O and NaOH-NaNO 3 -H 2 O, consistent with spectroscopic and computational studies showing enhanced interactions at higher temperatures. Although speciation in these highly concentrated electrolyte solutions is not well understood, the stabilization of ion clusters by: (i) optimizing charge density around the ions through different combinations of mixed cations and anions in solution; and (ii) high temperatures where ions experience prolonged contact, offers important clues for future research into how these species control solubility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Measurement of G-phase volume fraction and number density in duplex stainless steels using transmission electron microscopy

Duplex stainless steels (DSS) have a high toughness and strength due the presence of both austenitic and ferritic phases. These alloys have had limited use in power production applications due to thermal embrittlement caused by spinodal decomposition and development of G-phase precipitates in the ferrite. Lean grade DSS alloys (e.g., 2101, 2003) may offer improved thermal stability due to the reduction of Cr- and Ni-equivalent elements when compared to standard grade compositions (e.g., 2205, 2209). The abundance of the G-phase was measured in five duplex stainless steels, three wrought alloys (2101, 2003, 2205) and their matching filler metals (2101-w, 2209-w), after aging at 427 °C for 1000 h and 10,000 h. The G-phase volume fraction, number density, size, and precipitate spacing were found using quantitative analysis of transmission electron microscopy dark field images and the composition of G-phase precipitates on other clusters were characterized with atom probe tomography (APT). In the welded alloys, the G-phase was found to develop rapidly, relative to the wrought material. A positive correlation was found between the nickel equivalent composition of the alloy and the G-phase volume fraction. The alloys 2205, 2209, and 2101-w, which are higher in Cr and Ni, all showed significant G-phase precipitation, further strengthening the hypothesis that lean grade DSS alloys are more thermally stable against precipitation in the ferrite. Electron diffraction showed a secondary phase present in the 2101 wrought alloy at 10,000 h, but it was not crystallographically consistent with the G-phase; APT showed the presence of nanoclusters rich in both nickel and copper for this alloy. In conclusion, no secondary phases or clusters were found in 2003 after 10,000 h of aging, so it may be a candidate alloy for applications that require long-life times at high operating temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Accelerated radiation tolerance testing of Ti-based MAX phases

MAX phases have recently attracted significant attention for potential nuclear applications due to their novel properties such as unique hexagonal-compact nanolayered crystal structure, high-machinability due to lower hardness levels compared to conventional ceramics, and high-chemical inertness. In order for MAX phases to be used in nuclear reactors, two aspects deserve detailed investigations: (i) their phase stability at high-temperatures and (ii) microstructural defect formation and recovery induced by energetic particle irradiation. To date, degradation mechanisms of MAX phases at high-temperatures and following irradiation are largely unexplored fields of research. This work focuses on the evaluation of two Ti-based MAX phases – Ti 2 AlC and Ti 3 SiC 2 – within the context of extreme environments. To accomplish this, a one-of-a-kind comparison between neutron irradiations, performed over a decade of research at the High Flux Isotope Reactor (HFIR), and heavy-ion irradiations, carried out in situ in a Transmission Electron Microscope (TEM) at the MIAMI-2 facility, has been conducted. The results show Ti-based MAX phases are prone to accelerated decomposition under the conditions investigated. This questions the hypothesis that MAX phases exhibit high phase stability, especially when used in future nuclear energy systems where energetic particle irradiation is a dominating degradation mechanism.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Assessing the influence of microstructure on uranium hydride size distributions via small angle neutron scattering

Here, the effect of microstructure on the internal hydriding behavior of both cast (1 mm grain size) and rolled (25 μm grain size) uranium containing hydrogen concentrations between 0 and 1.8 wppm were evaluated via small angle neutron scattering (SANS). Increasing hydrogen content up to 1.8 wppm in the cast uranium only weakly affected the average uranium hydride (UH 3 ) precipitate size, calculated from the SANS data. Conversely, the UH 3 phase fraction was found to strongly depend on the hydrogen content in the same cast samples. A substantially reduced UH 3 particle size distribution was observed in the rolled uranium relative to cast uranium containing the same nominal hydrogen content. It is hypothesized that the suppression of UH 3 formation in the rolled uranium is driven by increased hydrogen trapping at grain boundaries, and theoretical calculations that account for trap density, potency, and hydrogen diffusion kinetics support this hypothesis.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effect of Sn oxides on the thermal conductivity of polycrystalline SnSe

SnSe is a promising thermoelectric material, with intrinsically low lattice thermal conductivity, κL. Surprisingly, in several reports, polycrystalline samples are found to have a higher thermal conductivity than single crystals. This disparity has been attributed to trace amounts of thermally conductive Sn oxides at the grain boundaries of polycrystalline samples. The same culprit was recently proposed to explain the reduction of κL in purified, oxide-free, SnSe polycrystals. Here, we test this hypothesis by: (i) tuning the type of oxide in SnSe by exploiting thermodynamic stability regions, since Sn-rich or Sn-poor compositions favour the formation of SnO or SnO 2 , respectively; and (ii) varying the quantity of SnO 2 by intentionally oxidizing SnSe powder before consolidation, to obtain samples with quantifiable amounts - up to 15% - of SnO 2 . We find that the κL of SnSe is impervious to changes in the type or the amount of Sn oxide present in the samples. Our results show that a simple “rule of mixtures” cannot be used to estimate the effect of grain boundary oxides on the thermal conductivity of SnSe. These results call for an improved understanding of the intriguing thermal transport mechanisms in SnSe and numerous other systems where a two-phase transport is presumed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Humidity sensitivity of large area silicon sensors: Study and implications

The production of large area sensors is one of the main challenges that the ATLAS collaboration faces for the new Inner-Tracker full-silicon detector. During the prototype fabrication phase for the High Luminosity Large Hadron Collider upgrade, several ATLAS institutes observed indications of humidity sensitivity of large area sensors, even at relative humidities well below the dew point. Specifically, prototype Barrel and End-Cap silicon strip sensors fabricated in 6-inch wafers manifest a prompt decrease of the breakdown voltage when operating under high relative humidity, adversely affecting the performance of the sensors. In addition to the investigation of these prototype sensors, a specific fabrication batch with special passivation is also studied, allowing for a deeper understanding of the responsible mechanisms. Here we present an extensive study of this behaviour on large area sensors. The locations of the hotspots at the breakdown voltage at high humidity are revealed using different infrared thermography techniques. Several palliative treatments are attempted, proving the influence of sensor cleaning methods, as well as baking, on the device performance, but no improvement on the humidity sensitivity was achieved. Furthermore, a study of the incidence of the sensitivity in different batches is also presented, introducing a hypothesis of the origins of the humidity sensitivity associated to the sensor edge design, together with passivation thickness and conformity. Several actions to be taken during sensor production and assembly are extracted from this study, in order to minimize the impact of humidity sensitivity on the performance of large area silicon sensors for High Energy Physics experiments.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Net lithium deposition and dominant self-sputtering in lithium tokamak experiment-β with a liquid lithium wall

We observed enhanced net lithium deposition and lithium erosion, possibly dominated by physical sputtering of lithium by lithium-ion bombardment, on the outer plasma-facing surface in the Lithium Tokamak eXperiment-β (LTX-β) during liquid lithium wall operations. Silicon crystal samples with micro-trenches (30 μm × 30 μm × 2–7 μm deep) were exposed to hydrogen plasmas in LTX-β for solid and liquid lithium wall operations. Post-mortem analysis using X-ray photoelectron spectroscopy combined with argon ion sputtering measured net lithium deposition of 8.2 or 21 nm on the silicon crystal surface exposed for ~ 50 repeated shots of ~ 50-ms hydrogen plasma discharges during the liquid lithium wall operations at a vessel temperature of 475 K. Energy dispersive X-ray spectroscopy measured oxygen concentration patterns on the micro-trench floors, which were due to oxidized lithium deposition. Using the inhomogeneous oxygen concentration pattern caused by an ion-shadowing effect associated with the micro-trench’s geometric structure, we determined a polar incident ion direction of 68.4 ± 1.6° referenced to the surface normal direction. This observation was well-explained by the hypothesis that self-sputtering of Li was a dominant lithium erosion source in addition to lithium sputtering by hydrogen bombardment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

One hundred years into the study of ecotypes, new advances are being made through large-scale field experiments in perennial plant systems

A hundred years after Turesson first clearly described how locally adaptive variation is distributed within species, plant biologists are making major breakthroughs in our understanding of mechanisms underlying adaptation from local populations to the scale of continents. Although the genetics of local adaptation has typically been studied in smaller reciprocal transplant experiments, here it is being evaluated with whole genomes in large-scale networks of common garden experiments with perennial switchgrass and poplar trees. These studies support the hypothesis that a complex combination of loci, both with and without adaptive trade-offs, underlies local adaptation and that hybridization and adaptive introgression play a key role in the evolution of these species. Future studies incorporating high-throughput phenotyping, gene expression, and modeling will be used to predict responses of these species to climate change.

Trade-off↗
DOE OSTI2020

Time-series learning of latent-space dynamics for reduced-order model closure

In this work, we study the performance of long short-term memory networks (LSTMs) and neural ordinary differential equations (NODEs) in learning latent-space representations of dynamical equations for an advection-dominated problem given by the viscous Burgers equation. Our formulation is devised in a nonintrusive manner with an equation-free evolution of dynamics in a reduced space with the latter being obtained through a proper orthogonal decomposition. In addition, we leverage the sequential nature of learning for both LSTMs and NODEs to demonstrate their capability for closure in systems that are not completely resolved in the reduced space. We assess our hypothesis for two advection-dominated problems given by the viscous Burgers equation. We observe that both LSTMs and NODEs are able to reproduce the effects of the absent scales for our test cases more effectively than does intrusive dynamics evolution through a Galerkin projection. This result empirically suggests that time-series learning techniques implicitly leverage a memory kernel for coarse-grained system closure as is suggested through the Mori–Zwanzig formalism.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Observation of photon-induced W+W- production in pp collisions at s = 13 TeV using the ATLAS detector

This letter reports the observation of photon-induced production of W -boson pairs, γγ → W W . The analysis uses 139 fb -1 of LHC proton–proton collision data taken at s = 13 TeV TeV recorded by the ATLAS experiment during the years 2015–2018. The measurement is performed selecting one electron and one muon, corresponding to the decay of the diboson system as W W → e ± νμ ∓ ν final state. The background-only hypothesis is rejected with a significance of well above 5 standard deviations consistent with the expectation from Monte Carlo simulation. A cross section for the γγ → W W process of 3.13 ± 0.31(stat.)±0.28(syst.) fb is measured in a fiducial volume close to the acceptance of the detector, by requiring an electron and a muon of opposite signs with large dilepton transverse momentum and exactly zero additional charged particles. This is found to be in agreement with the Standard Model prediction.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Evidence for Higgs boson decays to a low-mass dilepton system and a photon in pp collisions at $\sqrt{s}$ =13 TeV with the ATLAS detector

A search for the Higgs boson decaying into a photon and a pair of electrons or muons with an invariant mass mℓℓ < 30 GeV is presented. The analysis is performed using 139 fb -1 of proton–proton collision data, produced by the LHC at a centre-of-mass energy of 13 TeV and collected by the ATLAS experiment. Evidence for the H → ℓℓγ process is found with a significance of 3.2 over the background-only hypothesis, compared to an expected significance of 2.1 for the Standard Model prediction. The best-fit value of the signal-strength parameter, defined as the ratio of the observed signal yield to the one expected in the Standard Model, is μ=1.5±0.5. The Higgs boson production cross-section times the H → ℓℓγ branching ratio for mℓℓ < 30 GeV is determined to be $8.7_{-2.7}^{+2.8}$ fb.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Observation of electroweak W + W – pair production in association with two jets in proton-proton collisions at √s = 13 TeV

An observation is reported of the electroweak production of a W + W – pair in association with two jets, with both W bosons decaying leptonically. The data sample corresponds to an integrated luminosity of 138 fb –1 of proton-proton collisions at √s = 13 TeV, collected by the CMS detector at the CERN LHC. Events are selected by requiring exactly two opposite-sign leptons (electrons or muons) and two jets with large pseudorapidity separation and high dijet invariant mass. Events are categorized based on the flavor of the final-state leptons. A signal is observed with a significance of 5.6 standard deviations (5.2 expected) with respect to the background-only hypothesis. The measured fiducial cross section is 10.2 ± 2.0 fb and this value is consistent with the standard model prediction of 9.1 ± 0.6 fb.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Evidence of off-shell Higgs boson production from ZZ leptonic decay channels and constraints on its total width with the ATLAS detector

This Letter reports on a search for off-shell production of the Higgs boson using 139 fb —1 of $pp$ collision data at $\sqrt{s}$ = 13 TeV collected by the ATLAS detector at the Large Hadron Collider. The signature is a pair of $\overline{Z}$ bosons, with contributions from both the production and subsequent decay of a virtual Higgs boson and the interference of that process with other processes. The two observable final states are $\overline{Z}$ $\overline{Z}$ → 4$\ell$ and $\overline{Z}$ $\overline{Z}$ → 2$\ell$2$ν$ with $\ell$ = $e$ or $μ$. In the $\overline{Z}$ $\overline{Z}$ → 4$\ell$ final state, a dense Neural Network is used to enhance analysis sensitivity with respect to matrix element-based discrimination. The backgroundonly hypothesis is rejected with an observed (expected) significance of 3.3 (2.2) standard deviations, representing experimental evidence for off-shell Higgs boson production. Assuming that no new particles enter the production of the virtual Higgs boson, its total width can be deduced from the measurement of its off-shell production cross-section. The measured total width of the Higgs boson is ${4.5}_{—2.5}^{+3.3}$ MeV, and the observed (expected) upper limit on the total width is found to be 10.5 (10.9) MeV at 95% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Observation of four top quark production in proton-proton collisions at s = 13 TeV

The observation of the production of four top quarks in proton-proton collisions is reported, based on a data sample collected by the CMS experiment at a center-of-mass energy of 13 TeV in 2016–2018 at the CERN LHC and corresponding to an integrated luminosity of 138 fb − 1 . Events with two same-sign, three, or four charged leptons (electrons and muons) and additional jets are analyzed. Compared to previous results in these channels, updated identification techniques for charged leptons and jets originating from the hadronization of b quarks, as well as a revised multivariate analysis strategy to distinguish the signal process from the main backgrounds, lead to an improved expected signal significance of 4.9 standard deviations above the background-only hypothesis. Four top quark production is observed with a significance of 5.6 standard deviations, and its cross section is measured to be 17.7 − 3.5 + 3.7 (stat) − 1.9 + 2.3 (syst) fb , in agreement with the available standard model predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Observation of $Wγγ$ triboson production in proton-proton collisions at s = 13 TeV with the ATLAS detector

This letter reports the observation of W(ℓν)γγ production in proton-proton collisions. This measurement uses the full Run 2 sample of events recorded at a center-of-mass energy of $\sqrt{s}$ = 13 TeV by the ATLAS detector at the LHC, corresponding to an integrated luminosity of 140 fb -1 . Events with a leptonically-decaying W boson and at least two photons are considered. The background-only hypothesis is rejected with an observed and expected significance of 5.6 standard deviations. The inclusive fiducial production cross section of W(eν)γγ and W(μν)γγ events is measured to be σ fid = 13.8 ± 1.1(stat) $^{+2.1}_{-2.0}$(syst) ± 0.1(lumi) fb, in agreement with the Standard Model prediction.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗