Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “General Physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Nanoscale lubrication of ionic surfaces controlled via a strong electric field

Frictional forces arise whenever objects around us are set in motion. Controlling them in a rational manner means gaining leverage over mechanical energy losses and wear. This paper presents a way of manipulating nanoscale friction by means of in situ lubrication and interfacial electrochemistry. Water lubricant is directionally condensed from the vapor phase at a moving metal-ionic crystal interface by a strong confined electric field, thereby allowing friction to be tuned up or down via an applied bias. The electric potential polarity and ionic solid solubility are shown to strongly influence friction between the atomic force microscope (AFM) tip and salt surface. An increase in friction is associated with the AFM tip digging into the surface, whereas reducing friction does not influence its topography. No current flows during friction variation, which excludes Joule heating and associated electrical energy losses. Lastly, the demonstrated novel effect can be of significant technological importance for controlling friction in nano- and micro-electromechanical systems.

36 MATERIALS SCIENCE↗

Non-blinking single-photon emitters in silica

Samples for single-emitter spectroscopy are usually prepared by spin-coating a dilute solution of emitters on a microscope cover slip of silicate based glass (such as quartz). Here, we show that both borosilicate glass and quartz contain intrinsic defect colour centres that fluoresce when excited at 532 nm. In a microscope image the defect emission is indistinguishable from spin-coated emitters. The emission spectrum is characterised by multiple peaks with the main peak between 2.05 and 2.20 eV, most likely due to coupling to a silica vibration with an energy that varies between 160 and 180 meV. The defects are single-photon emitters, do not blink, and have photoluminescence lifetimes of a few nanoseconds. Furthermore, photoluminescence from such defects may previously have been misinterpreted as originating from single nanocrystal quantum dots.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic theory of the plasmoelectric effect

Resonant metal nanostructures exhibit an optically induced electrostatic potential when illuminated with monochromatic light under off-resonant conditions. This plasmoelectric effect is thermodynamically driven by the increase in entropy that occurs when the plasmonic structure aligns its resonant absorption spectrum with incident illumination by varying charge density. As a result, the elevated steady-state temperature of the nanostructure induced by plasmonic absorption is further increased by a small amount. Here, we study in detail the thermodynamic theory underlying the plasmoelectric effect by analyzing a simplified model system consisting of a single silver nanoparticle. We find that surface potentials as large as 473 mV are induced under 100 W/m2 monochromatic illumination, as a result of a 11 mK increases in the steady-state temperature of the nanoparticle. Hence, we discuss the applicability of this analysis for realistic experimental geometries, and show that this effect is generic for optical structures in which the resonance is linked to the charge density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamic compression of dense oxide (Gd 3 Ga 5 O 12 ) from 0.4 to 2.6 TPa: Universal Hugoniot of fluid metals

Materials at high pressures and temperatures are of great current interest for warm dense matter physics, planetary sciences, and inertial fusion energy research. Shock-compression equation-of-state data and optical reflectivities of the fluid dense oxide, Gd 3 Ga 5 O 12 (GGG), were measured at extremely high pressures up to 2.6 TPa (26 Mbar) generated by high-power laser irradiation and magnetically-driven hypervelocity impacts. Above 0.75 TPa, the GGG Hugoniot data approach/reach a universal linear line of fluid metals, and the optical reflectivity most likely reaches a constant value indicating that GGG undergoes a crossover from fluid semiconductor to poor metal with minimum metallic conductivity (MMC). These results suggest that most fluid compounds, e.g., strong planetary oxides, reach a common state on the universal Hugoniot of fluid metals (UHFM) with MMC at sufficiently extreme pressures and temperatures. Lastly, the systematic behaviors of warm dense fluid would be useful benchmarks for developing theoretical equation-of-state and transport models in the warm dense matter regime in determining computational predictions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion spatial distributions at the liquid-vapor interface of aqueous potassium fluoride solutions

X-ray photoemission spectroscopy operating under ambient pressure conditions is used to probe ion distributions throughout the interfacial region of a free-flowing aqueous liquid micro-jet of 6 M potassium fluoride. Varying the energy of the ejected photoelectrons by carrying out experiments as a function of x-ray wavelength measures the composition of the aqueous-vapor interfacial region at various depths. The F{sup -} to K{sup +} atomic ratio is equal to unity throughout the interfacial region to a depth of 2 nm. The experimental ion profiles are compared with the results of a classical molecular dynamics simulation of a 6 M aqueous KF solution employing polarizable potentials. The experimental results are in qualitative agreement with the simulations when integrated over an exponentially decaying probe depth characteristic of an APPES experiment. First principles molecular dynamics simulations have been used to calculate the potential of mean force for moving a fluoride anion across the air-water interface. The results show that the fluoride anion is repelled from the interface, and this is consistent with the depletion of F{sup -} at the interface revealed by the APPES experiment and polarizable force field-based molecular dynamics simulation. Together, the APPES and MD simulation data provide a detailed description of the aqueous-vapor interface of alkali fluoride systems. This work offers the first direct observation of the ion distribution at a potassium fluoride aqueous solution interface. The current experimental results are compared to those previously obtained for saturated solutions of KBr and KI to underscore the strong difference in surface propensity between soft/large and hard/small halide ions in aqueous solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Towards enhanced ligand-centred photoluminescence in inorganic-organic frameworks for solid state lighting

Three novel inorganic-organic framework compounds containing the organic chromophore ligand 9-fluorenone-2,7-dicarboxylic acid (abbreviated H2FDC) and barium (BaFDC), cadmium (CdFDC) and manganese (MnFDC), respectively, have been synthesized and evaluated for their use as phosphor materials for solid state lighting and other applications. The results are compared with two earlier reported structures containing the same ligand with calcium (CaFDC) and strontium (SrFDC). The barium- and cadmium-containing compounds both show blue excited, yellow photoluminescence, while the manganese structure does not. The trends in luminescent efficiency for the Ba, Cd, Ca, and Sr derivatives are discussed in relation to crystallographic, optical, and low-temperature specific heat considerations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Light Induced Water Oxidation on Cobalt-Phosphate (Co-Pi) Catalyst Modified Semi-Transparent, Porous SiO2-BiVO4 Electrodes

A facile and simple procedure for the synthesis of semi-transparent and porous SiO{sub 2}-BiVO{sub 4} electrodes is reported. The method involves a surfactant assisted metal-organic decomposition at 500 C. An earth abundant oxygen evolution catalyst (OEC), cobalt phosphate (Co-Pi), has been used to modify the SiO{sub 2}-BiVO{sub 4} electrode by electrodeposition (ED) and photoassisted electrodeposition (PED) methods. Modified electrodes by these two methods have been examined for light induced water oxidation and compared to the unmodified SiO{sub 2}-BiVO{sub 4} electrodes by various photoelectrochemical techniques. The PED method was a more effective method of OEC preparation than the ED method as evidenced by an increased photocurrent magnitude during photocurrent-potential (I-V) characterizations. Electrode surfaces catalyzed by PED exhibited a very large cathodic shift (420 mV) in the onset potential for water oxidation. The chopped-light I-V measurements performed at different intervals over 24-hour extended testing under illumination and applied bias conditions show a fair photostability for PED Co-Pi modified SiO{sub 2}-BiVO{sub 4}.

14 SOLAR ENERGY↗

Three-Dimensional Complex-Shaped Photopolymerized Microparticles at Liquid Crystal Interfaces

Microparticles of arbitrary shapes immersed in the bulk of nematic fluids are known to produce dipolar or quadrupolar elastic distortions that can mediate long-range colloidal interactions. We use two-photon photopolymerization to obtain complex-shaped surface-bound microparticles that are then embedded into a nematic liquid crystal host with a uniform far-field director. By means of three-dimensional imaging with multi-photon excitation fluorescence polarizing microscopy, we demonstrate low-symmetry, long-range elastic distortions induced by the particles in the liquid crystal director field. These director distortions may provide a means for controlling elastic interactions in liquid crystals between custom-designed photopolymerized microparticles attached to confining solid substrates and nematic fluid-borne colloids, thus enabling elasticity-mediated templated self-assembly.

36 MATERIALS SCIENCE↗

Simulations of singlet exciton diffusion in organic semiconductors: a review

Our review describes the various aspects of simulation strategies for exciton diffusion in condensed phase thin films of organic semiconductors. Several methods for calculating energy transfer rate constants are discussed along with procedures for how to account for energetic disorder. Exciton diffusion can be modelled by using kinetic Monte-Carlo methods or master equations. Recent literature on simulation efforts for estimating exciton diffusion lengths of various conjugated polymers and small molecules are introduced. Moreover, these studies are discussed in the context of the effects of morphology on exciton diffusion and the necessity of accurate treatment of disorder for comparison of simulation results with those of experiment.

14 SOLAR ENERGY↗

Non-adiabatic excited state molecular dynamics of phenylene ethynylene dendrimer using a multiconfigurational Ehrenfest approach

Photoinduced dynamics of electronic and vibrational unidirectional energy transfer between meta-linked building blocks in a phenylene ethynylene dendrimer is simulated using a multiconfigurational Ehrenfest in time-dependent diabatic basis (MCE-TDDB) method, a new variant of the MCE approach developed by us for dynamics involving multiple electronic states with numerous abrupt crossings. Excited-state energies, gradients and non-adiabatic coupling terms needed for dynamics simulation are calculated on-the-fly using the Collective Electron Oscillator (CEO) approach. In conclusion, a comparative analysis of our results obtained using MCE-TDDB, the conventional Ehrenfest method and the surface-hopping approach with and without decoherence corrections is presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The stability, electronic structure, and optical absorption of boron-nitride diamondoids predicted with first-principles calculations

Although diamondoids are broadly studied for their fundamental properties and applications, boron-nitride-based diamondoids are scarcely explored.In this report we predict the stability, electronic structure, and optical absorption spectra of six boron-nitride (BN) diamondoids with first-principles methods based on pseudopotential density functional theory and many-body perturbation methods implemented with a real-space formalism. We find that four of them are thermodynamically stable at room temperature, while B10N8H24 and B6N4H16 show thermodynamic instability in molecular dynamics simulations. With the GW approximation, we predicted the ionization energies and electron affinities of BN-diamondoids and find that the evolution of the electronic structure with size does not follow the same trend as diamondoids, owing to the unbalanced numbers of boron and nitrogen atoms. We show strong photoabsorption of BN-triamantane and BN-adamantane in the infrared and visible ranges and analyze the features of low-energy absorption by examining the characteristics of related orbitals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low-temperature activation of methane on doped single atoms: descriptor and prediction

Catalytic transformation of methane under mild conditions remains a grand challenge. Fundamental understanding of C–H activation of methane is crucial for designing a catalyst for the utilization of methane at low temperature. Recent experiments show that strong methane chemisorption on oxides of precious metals leads to facile C–H activation. However, only a very few such oxides are capable (for example, IrO 2 and PdO). Here we show for the first time that strong methane chemisorption and facile C–H activation can be accomplished by single transition-metal atoms on TiO 2 , some of which are even better than IrO 2 . Using methane adsorption energy as a descriptor, we screened over 30 transition-metal single atoms doped on TiO 2 for the chemisorption of methane by replacing a surface Ti atom with a single atom of another transition metal. It is found that the adsorption energies of methane on a single atom of Pd, Rh, Os, Ir, and Pt doped on rutile TiO 2 (110) are greater than or similar to those on rutile IrO 2 (110), a benchmark for the chemisorption of methane on transition oxides. Electronic structure analysis uncovered orbital overlap and mixing between methane and the single atom, as well as significant localization of the charge between the molecule and the surface, demonstrating chemical bonding of CH 4 to doped single atoms. Facile C–H dissociation has been found on the single-atom sites with the transition state energies lower than desorption energies. We report our computational studies predict that Pd, Rh, Os, Ir, and Pt single atoms on rutile TiO 2 (110) can activate C–H of methane at a temperature lower than 25 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning core–shell interactions in tungsten carbide–Pt nanoparticles for the hydrogen evolution reaction

Platinum (Pt) is among the best electrocatalysts for the hydrogen evolution reaction (HER), a potentially fossil-free route for hydrogen production. Reduction in Pt loading and overall catalyst cost, without sacrificing catalytic activity, can be achieved by the synthesis of stable core–shell nanoparticles of transition-metal carbides and Pt. Here we employ density-functional theory (DFT) calculations to study and contrast the suitability of the α and β phases of tungsten carbide (WC) as support (core) materials for Pt shells. We examine the thermodynamic stability of 1–2 layers of Pt on α- and β-WC surfaces, carefully accounting for the delicate balance between epitaxial mismatch strains and chemical bonding between cores and shells. We also study the effects of alloying β-WC with Ti to modulate the stability and electronic structure of the core–shell structures. We compare the electronic structures of Pt overlayers supported on α-WC and β-Ti x W 1-x C surfaces and compare their activities for HER using the hydrogen binding energy as a descriptor of catalytic activity. Our studies reveal that moderate Ti doping of the metastable β-WC phase significantly improves its stability and, with merely two layers of Pt loading, HER activity comparable or superior to Pt(111) can be attained. Overall, our results provide detailed insight into experimental observations of the excellent stability and high catalytic activity of β-Ti x W 1-x C@Pt core–shell nanoparticles.

density functional theory↗