Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GREEN FUNCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Photon-assisted tunneling through a topological superconductor with Majorana bound states

Employing the Keldysh Nonequilibrium Green’s function method, we investigate time-dependent transport through a topological superconductor with Majorana bound states in the presence of a high frequency microwave field. It is found that Majorana bound states driven by photon-assisted tunneling can absorb(emit) photons and the resulting photon-assisted tunneling side band peaks can split the Majorana bound state that then appears at non-zero bias. This splitting breaks from the current opinion that Majorana bound states appear only at zero bias and thus provides a new experimental method for detecting Majorana bound states in the Non-zero-energy mode. We not only demonstrate that the photon-assisted tunneling side band peaks are due to Non-zero-energy Majorana bound states, but also that the height of the photon-assisted tunneling side band peaks is related to the intensity of the microwave field. It is further shown that the time-varying conductance induced by the Majorana bound states shows negative values for a certain period of time, which corresponds to a manifestation of the phase coherent time-varying behavior in mesoscopic systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Controllable spin polarization and spin filtering in a zigzag silicene nanoribbon

Using non-equilibrium Green's function, we study the spin-dependent electron transport properties in a zigzag silicene nanoribbon. To produce and control spin polarization, it is assumed that two ferromagnetic strips are deposited on the both edges of the silicene nanoribbon and an electric field is perpendicularly applied to the nanoribbon plane. The spin polarization is studied for both parallel and anti-parallel configurations of exchange magnetic fields induced by the ferromagnetic strips. We find that complete spin polarization can take place in the presence of perpendicular electric field for anti-parallel configuration and the nanoribbon can work as a perfect spin filter. The spin direction of transmitted electrons can be easily changed from up to down and vice versa by reversing the electric field direction. For parallel configuration, perfect spin filtering can occur even in the absence of electric field. In this case, the spin direction can be changed by changing the electron energy. Finally, we investigate the effects of nonmagnetic Anderson disorder on spin dependent conductance and find that the perfect spin filtering properties of nanoribbon are destroyed by strong disorder, but the nanoribbon retains these properties in the presence of weak disorder.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of local field and inherent strain in reflectance anisotropy spectra of A{sup III}B{sup V} semiconductors with naturally oxidized surfaces

Reflectance anisotropy (RA) spectra of naturally oxidized (001) surfaces of GaAs and InAs crystals are measured for photon energies from 1.5 up to 5.5 eV. The differential high-accuracy RA spectra reveal features substantially different from those caused by either a reconstruction of clean surface or a built-in near-surface electric field. Models of atomic structure with anisotropic transition layers of excess arsenic atoms specific for GaAs(001)/oxide and InAs(001)/oxide interfaces are proposed. In conformity with these models, a general theory of reflectance anisotropy is developed for semiconductor/oxide interfaces within the Green's function technique. The theory takes into account the combined effect of local field due to interface dipoles and of intrinsic near-surface strain of the crystal. Measured RA spectra are analyzed in the model of valence-bond dipoles occupying a rectangular lattice in a multilayer medium. Comparing the measured and calculated spectra, we conclude that RA spectra of oxidized GaAs(001) and InAs(001) surfaces are simultaneously influenced by interface and near-surface anisotropies. The former is responsible for the broad-band spectral features which are associated with polarizability of the valence bonds attached to As atoms at the crystal/oxide interface. The near-surface anisotropy is due to inherent uniaxial straining the near-surface region of crystal. The effect of strain on RA spectra is experimentally and theoretically substantiated for GaAs crystal wafers undergone a uniaxial applied stress. Basically, this work results in the following. It establishes the physical nature of different levels of RA spectra observed in a majority of papers, but never analyzed. It demonstrates how the studied features of RA spectra could be applied for optical characterization of strained interfaces and atomic layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theoretical Study of Superconducting Gap Parameters, Density of States, and Condensation Energy of Two-Band Iron-Based Superconductor BaFe{sub 2}(As{sub 1−x}P{sub x}){sub 2}

This research work focuses on the theoretical study of superconducting gap parameters, density of states, and condensation energy of two-band iron-based superconductor BaFe{sub 2}(As{sub 1−x}P{sub x}){sub 2}. By developing a model Hamiltonian for the given system and by using the double time temperature-dependent Green’s function formalism, we obtained mathematical expressions for superconducting order parameters for the electron intra-band (Δ{sub e}), hole intra-band (Δ{sub h}), inter-band between the two bands (Δ{sub eh}) and superconducting transition temperature (T{sub C}). Furthermore, we obtained the density of states for each intra-band, N(ε) and condensation energy (E{sub c}) for BaFe{sub 2}(As{sub 1−x}P{sub x}){sub 2}. By using the experimental values and by considering some plausible approximations of the parameters in the obtained expressions, phase diagrams of superconducting order parameters for Δ{sub e}, Δ{sub h}, and Δ{sub eh} versus temperature and superconducting transition temperature (T{sub C}) versus the inter-band pairing potential (V{sub eh}) are plotted. We also plotted the density of states for the electron intra-band, N{sub e}(ε) and hole intra-band, N{sub h}(ε) versus excitation energy (ε) at T = 0K, and the variation of density of states with temperature. Similarly, phase diagrams of condensation energy (E{sub c}) versus temperature, inter-band pairing potential, and superconducting transition temperature are plotted for the material. Our results are in agreement with previous findings.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

GW and Bethe-Salpeter study of small water clusters

We study within the GW and Bethe-Salpeter many-body perturbation theories the electronic and optical properties of small (H{sub 2}O){sub n} water clusters (n = 1-6). Comparison with high-level CCSD(T) Coupled-Cluster at the Single Double (Triple) levels and ADC(3) Green’s function third order algebraic diagrammatic construction calculations indicates that the standard non-self-consistent G{sub 0}W{sub 0}@PBE or G{sub 0}W{sub 0}@PBE0 approaches significantly underestimate the ionization energy by about 1.1 eV and 0.5 eV, respectively. Consequently, the related Bethe-Salpeter lowest optical excitations are found to be located much too low in energy when building transitions from a non-self-consistent G{sub 0}W{sub 0} description of the quasiparticle spectrum. Simple self-consistent schemes, with update of the eigenvalues only, are shown to provide a weak dependence on the Kohn-Sham starting point and a much better agreement with reference calculations. The present findings rationalize the theory to experiment possible discrepancies observed in previous G{sub 0}W{sub 0} and Bethe-Salpeter studies of bulk water. The increase of the optical gap with increasing cluster size is consistent with the evolution from gas to dense ice or water phases and results from an enhanced screening of the electron-hole interaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantum calculations of the carrier mobility: Methodology, Matthiessen's rule, and comparison with semi-classical approaches

We discuss carrier mobilities in the quantum Non-Equilibrium Green's Functions (NEGF) framework. We introduce a method for the extraction of the mobility that is free from contact resistance contamination and with minimal needs for ensemble averages. We focus on silicon thin films as an illustration, although the method can be applied to various materials such as semiconductor nanowires or carbon nanostructures. We then introduce a new paradigm for the definition of the partial mobility μ{sub M} associated with a given elastic scattering mechanism “M,” taking phonons (PH) as a reference (μ{sub M}{sup −1}=μ{sub PH+M}{sup −1}−μ{sub PH}{sup −1}). We argue that this definition makes better sense in a quantum transport framework as it is free from long range interference effects that can appear in purely ballistic calculations. As a matter of fact, these mobilities satisfy Matthiessen's rule for three mechanisms [e.g., surface roughness (SR), remote Coulomb scattering (RCS) and phonons] much better than the usual, single mechanism calculations. We also discuss the problems raised by the long range spatial correlations in the RCS disorder. Finally, we compare semi-classical Kubo-Greenwood (KG) and quantum NEGF calculations. We show that KG and NEGF are in reasonable agreement for phonon and RCS, yet not for SR. We discuss the reasons for these discrepancies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum confinement in self-assembled two-dimensional nanoporous honeycomb networks at close-packed metal surfaces

Quantum confinement of a two-dimensional electron gas by supramolecular nanoporous networks is investigated using the boundary elements method based on Green’s functions for finite geometries and electron plane wave expansion for periodic systems. The “particle in a box” picture was analyzed for cases with selected symmetries that model previously reported architectures constructed from organic and metal-organic scattering centers confining surface state electrons of Ag(111) and Cu(111). First, by analyzing a series of cases with systematically defined parameters (scattering geometry, potentials, and effective broadening), we demonstrate how the scattering processes affect the properties of the confined electrons. For the features of the local density of states reported by scanning tunneling spectroscopy (STS), we disentangle the contributions of lifetime broadening and splitting of quantum well states due to coupling of neighboring quantum dots. For each system, we analyze the local electron density distribution and relate it to the corresponding band structure as calculated within the plane-wave expansion framework. Then, we address two experimental investigations, where in one case only STS data and in the other case mainly angle-resolved photoemission spectroscopy (ARPES) data were reported. In both cases, the experimental findings can be successfully simulated. Furthermore, the missing information can be complemented because our approach allows to correlate the information obtained by STS with that of ARPES. The combined analysis of several observations suggests that the scattering potentials created by the network originate primarily from the adsorbate-induced changes of the local surface dipole barrier.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Computational modeling and analysis of thermoelectric properties of nanoporous silicon

In this paper, thermoelectric properties of nanoporous silicon are modeled and studied by using a computational approach. The computational approach combines a quantum non-equilibrium Green's function (NEGF) coupled with the Poisson equation for electrical transport analysis, a phonon Boltzmann transport equation (BTE) for phonon thermal transport analysis and the Wiedemann-Franz law for calculating the electronic thermal conductivity. By solving the NEGF/Poisson equations self-consistently using a finite difference method, the electrical conductivity σ and Seebeck coefficient S of the material are numerically computed. The BTE is solved by using a finite volume method to obtain the phonon thermal conductivity k{sub p} and the Wiedemann-Franz law is used to obtain the electronic thermal conductivity k{sub e}. The figure of merit of nanoporous silicon is calculated by ZT=S{sup 2}σT/(k{sub p}+k{sub e}). The effects of doping density, porosity, temperature, and nanopore size on thermoelectric properties of nanoporous silicon are investigated. It is confirmed that nanoporous silicon has significantly higher thermoelectric energy conversion efficiency than its nonporous counterpart. Specifically, this study shows that, with a n-type doping density of 10{sup 20} cm{sup –3}, a porosity of 36% and nanopore size of 3 nm × 3 nm, the figure of merit ZT can reach 0.32 at 600 K. The results also show that the degradation of electrical conductivity of nanoporous Si due to the inclusion of nanopores is compensated by the large reduction in the phonon thermal conductivity and increase of absolute value of the Seebeck coefficient, resulting in a significantly improved ZT.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomistic modeling of energy band alignment in CdSeTe surfaces

Atomistic modeling based on Desnity Functional Theory (DFT)- 1/2 method coupled with surface Green’s function has been employed to investigate the energy band alignment results in cadmium selenium telluride (CdSeTe) surfaces. The structural and electronic properties of the bulk ternary alloy were established before cleaving the CdSeTe low index surface facets. The dependency of atomic-scale electronic features on different plane orientations was explored by studying the energy band alignment diagrams in the unreconstructed and reconstructed surfaces. While the low index CdSeTe surface geometry reconstructions replicate the CdTe surface geometries, the energy band alignment features of the unreconstructed and reconstructed CdSeTe surfaces differ from those observed in CdTe low index surfaces. The structurally relaxed reconstructed CdSeTe surface results in purely flat bands as opposed to an internal cusp feature observed in CdTe surfaces. The presence of an internal energy cusp in CdTe(111) surfaces is expected to play a key role in enhancing the hole charge transport towards the back of CdTe-only solar cell device and the absence of such feature in CdSeTe surface may explain one of the reason for the lower performance of CdSeTe-only solar cell seen experimentally.

36 MATERIALS SCIENCE↗

A linear response framework for quantum simulation of bosonic and fermionic correlation functions

Response functions are a fundamental aspect of physics; they represent the link between experimental observations and the underlying quantum many-body state. However, this link is often under-appreciated, as the Lehmann formalism for obtaining response functions in linear response has no direct link to experiment. Within the context of quantum computing, and via a linear response framework, we restore this link by making the experiment an inextricable part of the quantum simulation. This method can be frequency- and momentum-selective, avoids limitations on operators that can be directly measured, and can be more efficient than competing methods. As prototypical examples of response functions, we demonstrate that both bosonic and fermionic Green’s functions can be obtained, and apply these ideas to the study of a charge-density-wave material on the ibm_auckland superconducting quantum computer. The linear response method provides a robust framework for using quantum computers to study systems in physics and chemistry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Selective sensing of ethylene and glucose using carbon-nanotube-based sensors: an ab initio investigation

Functionalized carbon nanotubes have great potential for nanoscale sensing applications, yet many aspects of their sensing mechanisms are not understood. Here, two paradigmatic sensor configurations for detection of biologically important molecules are investigated through ab initio calculations: a non-covalently functionalized nanotube for glucose detection and a covalently functionalized nanotube for ethylene detection. Glucose and ethylene control key life processes of humans and plants, respectively, despite of their structural and chemical simplicity. The sensors’ electrical conductance and transmission coefficients are evaluated at the full density-functional theory level via the non-equilibrium Green's function method. We also investigate the effects of the density of the receptors, the band gaps of the nanotubes, the source–drain voltages, and the atomic modification of the receptor on detection sensitivities. A clear atomistic picture emerges about the mechanisms involved in glucose and ethylene sensing. While semiconducting nanotubes exhibit good sensitivities in both cases, the current through metallic nanotubes is only weakly affected by analyte attachment. These quantitative results could guide the design of improved sensors.

Chemistry↗

New insights on non-perturbative Yang-Mills

In this talk we review some recent results on the infrared properties of the gluon and ghost propagators in pure Yang-Mills theories. These results are obtained from the corresponding Schwinger-Dyson equation formulated in a special truncation scheme, which preserves gauge invariance. The presence of massless poles in the three gluon vertex triggers the generation of a dynamical gluon mass (Schwinger mechanism in d = 4), which gives rise to an infrared finite gluon propagator and ghost dressing function. As a byproduct of this analysis we calculate the Kugo-Ojima function, required for the definition of the non-perturbative QCD effective charge within the pinch technique framework. We show that the numerical solutions of these non-perturbative equations are in very good agreement with the results of SU(3) lattice simulations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Origin of the performances degradation of two-dimensional-based metal-oxide-semiconductor field effect transistors in the sub-10 nm regime: A first-principles study

The impact of the scaling of the channel length on the performances of metal-oxide-semiconductor field effect transistors, based on two-dimensional (2D) channel materials, is theoretically investigated, using density functional theory combined with the non-equilibrium Green's function method. It is found that the scaling of the channel length below 10 nm leads to strong device performance degradations. Our simulations reveal that this degradation is essentially due to the tunneling current flowing between the source and the drain in these aggressively scaled devices. It is shown that this electron tunneling process is modulated by the effective mass of the 2D channel material, and sets the limit of the scaling in future transistor designs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

TURBOMOLE: Modular program suite for ab initio quantum-chemical and condensed-matter simulations

TURBOMOLE is a collaborative, multi-national software development project aiming to provide highly efficient and stable computational tools for quantum chemical simulations of molecules, clusters, periodic systems, and solutions. The TURBOMOLE software suite is optimized for widely available, inexpensive, and resource-efficient hardware such as multi-core workstations and small computer clusters. TURBOMOLE specializes in electronic structure methods with outstanding accuracy–cost ratio, such as density functional theory including local hybrids and the random phase approximation (RPA), GW-Bethe–Salpeter methods, second-order Møller–Plesset theory, and explicitly correlated coupled-cluster methods. TURBOMOLE is based on Gaussian basis sets and has been pivotal for the development of many fast and low-scaling algorithms in the past three decades, such as integral-direct methods, fast multipole methods, the resolution-of-the-identity approximation, imaginary frequency integration, Laplace transform, and pair natural orbital methods. This review focuses on recent additions to TURBOMOLE’s functionality, including excited-state methods, RPA and Green’s function methods, relativistic approaches, high-order molecular properties, solvation effects, and periodic systems. A variety of illustrative applications along with accuracy and timing data are discussed. Moreover, available interfaces to users as well as other software are summarized. TURBOMOLE’s current licensing, distribution, and support model are discussed, and an overview of TURBOMOLE’s development workflow is provided. Challenges such as communication and outreach, software infrastructure, and funding are highlighted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrode-molecule energy level offsets in a gold-benzene diamine-gold single molecule tunnel junction

One means for describing electron transport across single molecule tunnel junctions (MTJs) is to use density functional theory (DFT) in conjunction with a nonequilibrium Green’s function formalism. This description relies on interpreting solutions to the Kohn–Sham (KS) equations used to solve the DFT problem as quasiparticle (QP) states. Many practical DFT implementations suffer from electron self-interaction errors and an inability to treat charge image potentials for molecules near metal surfaces. For MTJs, the overall effect of these errors is typically manifested as an overestimation of electronic currents. Correcting KS energies for self-interaction and image potential errors results in MTJ current–voltage characteristics in close agreement with measured currents. An alternative transport approach foregoes a QP picture and solves for a many-electron wavefunction on the MTJ subject to open system boundary conditions. It is demonstrated that this many-electron method provides similar results to the corrected QP picture for electronic current. The analysis of these two distinct approaches is related through corrections to a junction’s electronic structure beyond the KS energies for the case of a benzene diamine molecule bonded between two gold electrodes.

Szepieniec, Mark S.↗

Molecular junction by tunneling in 1D and quasi-1D systems

We have investigated electron tunneling through two one-dimensional (1D) molecular junctions based on first-principles simulations using the density functional theory combined with the non-equilibrium Green's functions methodology. The first junction, composed of left and right carbyne wire electrodes with a sodium atom in between, is atomically thin. The second one is quasi-one-dimensional (quasi-1D) and consists of two single-wall carbon nanotube electrodes, closed on the tips and again a sodium atom in the scattering region. Although the bridging atom bonds weakly to the electrodes in both systems, it strongly affects the electronic transport properties, such as electron transmission, current–voltage relation, differential conductance, density of states and eigenchannels. This is demonstrated by comparing with the results obtained from the corresponding systems for both the 1D and the quasi-1D junctions in the absence of the central sodium atom. The revealed transport properties are sensitive to the molecular geometry. This helps future molecular electronic device design.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-consistency in GWΓ formalism leading to quasiparticle-quasiparticle couplings

Within many-body perturbation theory, Hedin's formalism offers a systematic way to iteratively compute the self-energy Σ of any dynamically correlated interacting system, provided one can evaluate the interaction vertex Γ exactly. This is, however, impossible, in general, for it involves the functional derivative of Σ with respect to the Green's function. Here, we analyze the structure of this derivative, splitting it into four contributions and outlining the type of quasiparticle interactions that each of them generate. Moreover, we show how, in the implementation of self-consistency, the action of these contributions can be classified into two: A quantitative renormalization of previously included interaction terms and the inclusion of qualitatively distinct interaction terms through successive functional derivatives of Γ itself. Implementing this latter type of self-consistency can extend the validity of perturbative approximations based on Hedin's equations toward the high interaction limit, as we show in the example of the Hubbard dimer. Furthermore, our analysis also provides a unifying perspective on the perturbation theory landscape, showing how the T-matrix approach is completely contained in Hedin's formalism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗