Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FIGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Methods for Detection and Correction of Sudden Pixel Sensitivity Drops

PDC 8.0 includes implementation of a new algorithm to detect and correct step discontinuities appearing in roughly one of every twenty stellar light curves during a given quarter. An example of such a discontinuity in an actual light curve is shown in fig. 1. The majority of such discontinuities are believed to result from high-energy particles (either cosmic or solar in origin) striking the photometer and causing permanent local changes (typically -0.5% in summed apertures) in quantum efficiency, though a partial exponential recovery is often observed. Since these features, dubbed sudden pixel sensitivity dropouts (SPSDs), are uncorrelated across targets they cannot be properly accounted for by the current detrending algorithm. PDC de-trending is based on the assumption that features in flux time series are due either to intrinsic stellar phenomena or to systematic errors and that systematics will exhibit measurable correlations across targets. SPSD events violate these assumptions and their successful removal not only rectifies the flux values of affected targets, but demonstrably improves the overall performance of PDC de-trending.

Kolodziejczak, Jeffery↗

Feeding Ten Billion People Is Possible Within Four Terrestrial Planetary Boundaries

Global agriculture puts heavy pressure on planetary boundaries, posing the challenge to achieve future food security without compromising Earth system resilience. On the basis of process-detailed, spatially explicit representation of four interlinked planetary boundaries (biosphere integrity, land-system change, freshwater use, nitrogen flows) and agricultural systems in an internally consistent model framework, we here show that almost half of current global food production depends on planetary boundary transgressions. Hotspot regions, mainly in Asia, even face simultaneous transgression of multiple underlying local boundaries. If these boundaries were strictly respected, the present food system could provide a balanced diet (2,355 kcal per capita per day) for 3.4 billion people only. However, as we also demonstrate, transformation towards more sustainable production and consumption patterns could support 10.2 billion people within the planetary boundaries analysed. Key prerequisites are spatially redistributed cropland, improved water–nutrient management, food waste reduction and dietary changes. Adoption of the Sustainable Development Goals by all nations in 2015 is the first ever commitment to a world development path that safeguards the stability of the Earth system as a prerequisite for meeting universal human standards1. The longstanding challenge of achieving food security through sustainable agriculture is particularly acute in this context as world agriculture is a leading cause for the current transgressions of multiple planetary boundaries (PBs) globally and regionally2–5. The PB framework is a comprehensive scientific attempt to synoptically define our planet’s biogeophysical limits to anthropogenic interference. It suggests bounds to nine interacting processes that together delineate a Holocene-like Earth system state. The Holocene is chosen as the reference state as it is the only period known to provide a safe operating space for a world population of several billion people, and according to a precautionary principle, the PBs are set in sufficient distance from processes that may critically undermine Earth system resilience and global sustainability. A challenging question, thus, is whether human development goals such as food security can be met while maintaining multiple PBs along with their subglobal manifestations. Further PB transgressions could jeopardize the chances of providing sufficient food for a world population projected to be wealthier and reach >9 billion by 2050. This conundrum portrays a tradeoff between Earth’s biophysical carrying capacity and humankind’s rising food demand, calling in response for radical rethinking of food production and consumption patterns6–9. Yield gap closures, avoidance of excessive input use, shifts towards less resource-demanding diets, food waste reductions and efficient international trade are crucial options for sustainably increasing the food supply10–15. For example, enhancing water-use efficiency on irrigated and rain-fed farms can triple or quadruple crop yields in low-performing systems, suggesting possible global gains of >20% (ref. 16). Even higher gains appear feasible through globally optimized configurations of the land-use pattern17, and cutting food losses by half could generate food for another billion people18. Thus, collective large-scale implementation of such options could sustain food for a further growing world population19. Yet achieving this within a safe operating space as defined by PBs requires not only a halt to but actually a reversal of existing PB transgressions. Previous studies suggest that such a reconciliation might be possible, but these were based on aggregate representations of PBs (not accounting for the spatial patterns of limits, transgressions and interactions) or considered only one boundary in isolation17,20–23. Here, we systematically quantify to what extent current food production depends on local to global transgressions of the PBs for biosphere integrity, land-system change, freshwater use and nitrogen (N) flows, along with the potential of a range of solutions to avoid these transgressions and still increase food supply (Table 1). To this end, we configured an internally consistent process-based model of the terrestrial biosphere including agriculture (LPJmL) with multiple spatially distributed PBs and their interactions. LPJmL is among the longest-established and best-evaluated biosphere models, showing robust performance regarding simulation of, for example, carbon, water and crop yield dynamics (Supplementary Figs. 1 and 2 and Supplementary Table 1; see ref. 24 for a comprehensive benchmarking and Supplementary Methods for more detail on model evaluations). In principle following established definitions4, we refine the computation of some PBs with respect to their regional patterns and interactions (Methods), providing globally gridded precautionary limits to human interference with the Earth system at a level of great detail. In particular, we account for the evidence that many PBs need to be represented spatially explicitly4 to cover their

Gerten, Dieter↗

Building a Robust Commercial Microgravity Economy in Earth's Orbit: Economic Readiness Considerations

The reduced gravity environment of space provides a unique opportunity to further our understanding of various materials phenomena involving the molten, fluidic and gaseous states as well as life science applications where, contrary to earlier beliefs, microgravity induces changes in single cells and simple organisms; not only in large organisms with a complex overall response to gravity (or lack thereof). The potential breadth of commercial opportunities in microgravity thus spans over many verticals of the private sector with applications ranging from fiber optics, high-resolution crystals, microencapsulation, 3D organs to perfume and color dyes. Overall, products manufactured in microgravity hold the promise to have key properties surpassing their best terrestrial counterparts. Commercialization, also known as taking a new technology to market, is a journey in itself where the business, economic, market and technological components must align to generate a successful outcome. A business perspective is very different than technology maturation. In order for a technology to be ready for commercialization, it must not only be mature, but it must also have a compelling business case, and the means to scale up production must be identified and practical. Creating a robust economy in Earths orbit (Fig 1) is especially challenging because of the complexity (high risks, lack of standardization) involved in predicting future growth. This complexity can easily overwhelm the fact that many of the products have an attractive touch of space which aids with branding and marketing.This paper reviews the types of added value that can be extracted from space, with an emphasis on the microgravity environment. In addition, lessons learned from past commercialization efforts will be reviewed. While past efforts have yielded some point successes, they have as a whole failed to precipitate a sustainable LEO based market

Cozmuta, Ioana↗

Lunar Glovebox Balance with Wireless Technology

The most important equipment required for processing lunar samples is a high-quality mass balance for maintaining accurate weight inventory, security, and scientific study. After careful review, a Curation Office memo by Michael Duke in 1978 chose the Mettler PL200 to be used for sample weight measurements inside the gloveboxes (Fig. 3). These commercial off-the-shelf (COTS) balances did not meet the strict accepted material requirements in the Lunar lab. As a result, each balance housing, weighing pan, and wiring was custom retrofitted to meet Lunar Operating Procedure (LOP) 54 requirements [for material construction restrictions]. The original design drawings for the custom housings, readout support stands, and wiring were done by the JSC engineering directorate. The 1977- 1978 schematics, drawings, and files are now housed in the curation Data Center. Per the design specifications, the housing was fabricated from aluminum grade 6061 T6, seamless welds, and anodized per MIL-A-8625 type I, class I. The balance feet were TFE Teflon and any required joints were sealed with Viton A gaskets. The readout display and support stands outside the glovebox were fabricated from 300 series stainless steel with #4 finish and mounted to the glovebox with welded bolts. Wire harnesses that linked the balance with the outside display and power were encapsulated with TFE Teflon and transported through custom Deutsch wire bulk head pass-through systems from inside to outside the glovebox. These Deutsch connectors were custom fabricated with 316L stainless steel bodies, Viton A O-rings, aluminum 6061 with electroless nickel plating, Teflon (replacing the silicone), and gold crimp connectors (no soldering). Many of the Deutsch connectors may have been used in the Apollo program high vacuum complex in building 37 and date to about 1968 to 1970.

Zeigler, Ryan A.↗

Hot Rocks! Near-Infrared Reflectances (and Emissivities) or Rocks at Venus Surface Temperatures

Venus’ surface can be viewed in emission through a few near-infrared (NIR) spectral ‘windows’ (1 µm) in its relatively opaque atmosphere [1]. Venus’ surface shows NIR emissivities that correlate with surface geology [2-4], and these emissivity variations are interpreted as differences in surface rock type (mafic vs. silicic) and/or extent of weathering (Fe2+ silicates vs. Fe3+-oxide-coated). To understand and quantify the observed variations in NIR emissivity, high-temperature (T) emissivity can be measured directly [5,6]. For example, emissivities of basalts in the wavelength range 0.85 – 1.2 µm are ~0.95 [5-8]. This can be tested by measureing reflectance, because Kirchoff’s Law holds that emissivity (e) = 1 – reflectance (r). The r of basalt in the NIR is ~0.05 [o] consistent with a NIR e of ~0.95 [5-8]. High-T NIR e’s of silicic igneous rocks (granitic, rhyolite) have been reported to be 0.8-0.9 [5,6], which is inconsistent with r values of 0.3-0.8 of such rocks at 25°C [9,10]. However, these measurements have been updated [7,8] and are consistent with the results here (see below and Fig. 3).

Treiman, A. H.↗

Genesis Mission Bulk Metallic Glass Solar Wind Collector: Characterization of Return Samples Available for Re-Allocation

The Genesis mission collected solar wind atoms for 28 months with a variety of collectors mounted on a spacecraft. A total of fifteen pure materials were selected as collectors based on engineering and science requirements. One of the materials was the bulk metallic glass (BMG). It was intended for collecting noble gases and solar energetic particles (SEP). This material is an amorphous metal which was custom made by C.C. Hays at the California Institute of Technology. The final glass composition is Zr58.5Nb2.8Cu15.6Ni12.8Al10.3 (in atom percent). The BMG was located on top of the wafer array mechanism and was exposed for the entire time the science canister was open (~28 months). Fortunately, the BMG did not suffer any serious damage and was intact after the Genesis canister’s “hard-landing” into the Utah desert (Fig. 1).

Gonzalez, C. P.↗

Subsampling of the Hamburg Meteorite: A Study in Cold Curation Techniques

The Hamburg meteorite is an H4 chondrite which was collected from the surface of a frozen lake in Michigan shortly after its observed fall on 16 Jan 2018 [1]. During and after collection, the meteorite was stored under clean, cold conditions, thereby minimizing any alteration to the sample. The meteorite was transported to the Johnson Space Center (JSC) where it was stored in a freezer until it was subsampled at the University of Alberta’s Sub-zero Facility for the Curation of Astromaterials (Fig. 1) [2]. Subsampling divided the meteorite into predefined target masses for preliminary examination and display purposes. This abstract summarizes the transport and subsampling process, which occurred in October 2019.

Mitchell, J. L.↗

Sediment Sorting and Rounding in a Basaltic Glacio-Fluvio-Aeolian Environment: Ϸhórisjökull Glacier, Iceland

Sediments and sedimentary rocks preserve a rich history of environment and climate. Identifying these signals requires an understanding of the physical and chemical processes that have affected sedimentary deposits [1]. Such processes include sorting and rounding during transport and chemical alteration through weathering and diagenesis. Although these processes have long been studied in quartz-dominated sedimentary systems [2], a lack of studies of basaltic sedimentary systems limits our interpretations of the environment and climate where mafic source rocks dominate, such as on Mars [3,4]. As part of the SAND-E: Semi-Autonomous Navigation for Detrital Environments project [5], which uses robotic operations to examine physical and chemical changes to sediments in basaltic glacio-fluvialaeolian environments, this research studies changes in sorting and rounding of fluvial-aeolian sediments along a glacier-proximal-to-glacier-distal transect in the outwash-plain of the Ϸόrisjökull glacier in SW Iceland (Fig. 1)

Mason, K. G.↗

NASA's Space Launch System Progress Toward the Launch Pad

NASA’s Space Launch System (SLS) took a substantial step toward the launch site in2020 with the move of the Artemis I core stage from the manufacturing site to the test stand as the program plans for a 2021 launch. (Fig. 1) SLS is NASA’s evolvable super-heavy-lift launch vehicle to support deep space exploration. It is based on evolutionary improvement to existing proven propulsion systems. Its twin solid rocket boosters employ a five-segment motor based on the four-segment space shuttle motor. Its four RS-25 main engines will operate at thrust levels higher than those in the space shuttle program. The core stage is anew design that will support propellant tanks for the engines and serve as the attach point for the boosters. Modern streamlined manufacturing processes and materials have been incorporated into the initial configuration with planned onramps for improved performance and/or affordability in subsequent versions. The primary role of SLS is to anchor the transportation for NASA’s Artemis Program to return humans to the Moon and build on the exploration that began during the Apollo Program. This paper will discuss progress to date for the SLS Program and look ahead to important milestones in 2020 and beyond.

John H Honeycutt↗

Developing a Customized Composite Drought Index for Pakistan

This study aims to identify historical agricultural droughts between 2004-2019 using 10 geophysical variables (Table 1) and determine what variables have little importance in this identification. Satellite data products or model outputs are used for all input variables. Understanding the interactions between the data will provide information on temporal and spatial patterns of how drought is presented in irrigated and rainfed areas (Fig. 2). This knowledge will assist in creating a Customized Composite Drought Index in future work

Drought↗

Boundary layer transition measured by DIT on the PSP rotor in forward flight

A well-defined reference set of data for CFD and comprehensive code validation for a scaled helicopter main rotor with boundary layer transition in forward flight is presented (Fig. 1). The boundary layer transition was measured using differential infrared thermography (DIT) on the top (suction) side of the three-bladed NASA/Army “PSP rotor”, in the NASA Langley 14- by 22-Foot Subsonic Tunnel at an advance ratio of 0.3 (115kt).

Boundary layer transistion↗

Retrieving DSD Moments from GPM-DPR: A Simulation Study Based on the Full DSD Spectra Characterized by the Generalized Gamma Model

Recently, a method to retrieve rain drop size distribution (DSD) moments from X-band dual polarization radar measurements has been developed using copolar reflectivity, differential reflectivity and specific attenuation. Two reference moments are retrieved first, followed by reconstructing the DSDs and calculating other moments using a generalized gamma model to represent the underlying shape, h(x), corresponding to the pair of chosen reference moments. Here we explore a similar approach but the retrieval method in this study uses dual-frequency radar measurements. In the case of GPM-DPR, the two frequencies are 13.8and 35 GHz, and their products include attenuation corrected reflecivities at both frequencies (Z and Z) and the specific attenuation (k, k, if available). Our approach is to use these products to determine two reference moments, namely M3 andM6 representing the third and the sixth moments respectively. Then, as with the polarimetric radar retrievals, we use the most probable h(x) to reconstruct the full DSD spectra, from which other moments are calculated. The best two DPR products for estimating M3 and M6 appear to be A and Z. Figure 1 shows the retrievals versus the ‘true’ moments. 2930 three-minute DSDs were used for the (T-matrix) scattering calculations at Ku and Ka bands but only cases with A > 0.5 dB/km were chosen. For the retrieved moments, the integration was performed only up to 6 mm drop diameter. The [1:1] line is included in Fig. 1. Even with just two DPR products as input the results seem promising, although the lower order moments show somewhat more scatter, especially the zeroth moment, M0. We will quantify the retrieval errors, and additionally examine the stability of h(x). For the latter, data from (i) Greeley, Colorado, (ii) Huntsville, Alabama, and (iii)Wallops, Virginia, will be used. Finally, a GPM overpass case over Huntsville, during a widespread rain event on 11 April 2016, will be considered as an initial test case.

precipitation↗

Retrospective Observations of the Solar System Planets with Interstellar Probe

Retrospective Observations of the Solar System Planets with Interstellar Probe The Interstellar Probe (ISP) mission concept could simultaneously explore a number of long-standing solar system and exoplanetary science objectives. ISP’s long mission lifetime, in combination with the large separations from the solar system objects it could observe (Fig. 1), affords a truly unique dataset. This data could be leveraged to validate models of solar system and extrasolar planets and would be directly analogous to observations we can expect to make for exoplanets. Taken together, these opportunities suggest that ISP’s mission is a critical and necessary component for future planetary science endeavors. This abstract aims to address some of the clear synergies between ISP’s mission profile and the gaps in solar system science that are necessarily gaps in our ability to wholly bound our expectations for exoplanet observations (partly discussed in several white papers, including Zemcov et al., 2019; Harman et al., 2020). Notably, no single platform has yet returned near-complete phase curves for the majority of solar system planets. This is partly due to observational constraints (e.g., ground-based observatories can observe a maximum phase angle of Jupiter, Saturn, Uranus, and Neptune of 12º, 6º, 3º, and 2º, respectively; Mallama and Hilton, 2018), but also because of the sparse nature of observations captured by spacecraft over the last 40 years (e.g., Pollack et al., 1986). Additionally, these observations come from disparate instruments that have their own biases and limitations, whereas observations by ISP’s instrumentation would provide almost uniform measurements of nearly every solar system object, removing much of the uncertainty when it comes to data intercomparisons. The biggest hurdles for making these measurements from ISP are likely to be the tight mass and energy limitations, as well as the technical challenge of looking as close as possible to the Sun without peering directly at it. This is potentially complicated by the nature of the larger astrophysical mission requirements, including whether the spacecraft is spinning, but integrating observations on board before returning them to Earth serves to both partly mitigate both the possibility of a spinning spacecraft and the downlink volumes for lookback data (although it may make data disaggregation more technically challenging). Ultimately, ISP could return truly innovative observational data of our solar system, in furtherance of a number of planetary and solar system science goals.

Sonny Harman↗

Structural Mode Identification of Galileo Spacecraft from Flight Data

The Galileo spacecraft was launched in 1989 and is on its way to explore Jupiter. The dual-spin configured spacecraft will orbit Jupiter to conduct scientific investigation of the planet and its satellites. A probe will be released prior to Jupiter orbit insertion and will follow an impact trajectory for atmospheric investigation. A sketch of the Galileo spacecraft is shown in Fig. 1. The scan platform of the Galileo spacecraft is attached to a flexible stator structure that is in turn attached to the rotor (spinning portion) of the spacecraft.

Glenn A. Macala↗

MarCO: Interplanetary Mission Development on a CubeSat Scale

Shortly after JPL’s Interior Exploration using Seismic Investigations, Geodesy and Heat Transport (InSight) mission launches, separates, and commences its cruise phase, two CubeSats will deploy from the launch vehicle’s upper stage and begin independent flight to Mars (Fig. 1). During InSight’s entry, descent, and landing (EDL) sequence, these twin Mars Cube One (MarCO) spacecraft will fly 3,500 km above the Martian surface, recording and relaying InSight UHF radio data to the Deep Space Network (DSN) on Earth1. MarCO is a twin CubeSat mission developed by the NASA Jet Propulsion Laboratory (JPL) to accompany the InSight (Interior Exploration using Seismic Investigations, Geodesy and Heat Transport) Mars mission lander. MarCO's primary mission objective is to launch with InSight and independently fly to Mars to serve as a communications relay during InSight's entry, descent, and landing (EDL) phase. MarCO represents a new type of deep space mission: CubeSats at Mars. Building on the development of JPL's first interplanetary CubeSat project, the Interplanetary Nano-Spacecraft Pathfinder in Relevant Environment (INSPIRE), MarCO further refined the approach to hardware, software, and ground architecture development to solve the challenges of quickly building low-budget spacecraft to fly to Mars. The greatest constraint, beyond others typical of CubeSat missions, was time. The duration between MarCO's conception to completion of spacecraft assembly was less than two years - an unprecedented schedule for any planetary mission to date. Through necessity, MarCO has built on previous experience, procedures, systems, and development methodologies, defining a new niche for supporting larger primary missions. The MarCO spacecraft are poised to write a new chapter in deep space exploration. Originally slated to launch and reach Mars in 2016, the InSight mission schedule subsequently slipped to 2018. During the original landing of InSight, Earth would not be in view, and no orbiter around Mars would have been in position to both receive UHF EDL data and simultaneously relay it back to Earth. It was from this obstacle that MarCO was conceived. Regardless of any changes to InSight’s 2018 EDL configuration geometry, MarCO is still expected to fly and serve in the same capacity as originally designed: the first CubeSat mission to Mars. CubeSats have historically been firmly in the domain of universities and small companies. As first conceived, they served as a platform upon which to teach all aspects of the space mission lifecycle. JPL took on this mission type with Interplanetary Nano-Spacecraft Pathfinder in Relevant Environment2 (INSPIRE), moving the concept into a new domain: deep space. Building from the INSPIRE platform and lessons learned, MarCO addressed new challenges in the domain of planetary missions: independent interplanetary flight and navigation, integration with a large-scale mission, long-distance and long-delay communication, short development time, and a small development team. Of these, the greatest constraint was schedule: only 18 months passed from conception of mission concept until delivery of fully assembled and tested flight hardware. Careful selection of mission team, along with extensive use of off-the-shelf equipment, and streamlining automated processes, was essential. This achievement represents the next step in the evolution of CubeSats beyond low-Earth orbit.

Werne, Thomas↗

Deciphering Extreme Mineral Records; Microstructural Phase Heritage of Shocked Materials

High-pressure minerals such as coesite, stishovite, and reidite are often used as indicators of shock metamorphism. However, high-pressure and high-temperature phases are metastable at ambient conditions and, therefore, often revert to a more energetically favorable phase. During solid-state transformations, the crystallographic orientations of the stable polymorph are controlled by the transformation pathway from the parent. Microstructural orientation analysis using electron backscatter diffraction (EBSD) of the stable phase can reveal systematic intercrystalline orientation relationships (OR) diagnostic of solid-state transformations from these high-pressure or high-temperature polymorph phases (Cayron et al., 2006). Knowledge of polymorph stability fields for a given system can thus be used to infer minimum shock P and/or T conditions that rocks have experienced, which are otherwise unavailable using traditional thermobarometers such as element partition coefficients. Using orientation relationships to infer the former presence of mineral phases has been termed microstructural “phase heritage”, and has successfully been used to probe for evidence of extreme pressures and temperatures resulting from hypervelocity impacts. The reconstruction of polymorphs of ZrSiO4 (zircon, reidite) and ZrO2 (baddeleyite) have further elucidated the behavior of these phases under hypervelocity impact conditions (Timms et al., 2017a; White et al., 2018), and OR analysis of shocked monazite has identified a previously unrecognized tetragonal high-P polymorph (Erickson et al., 2019). Zircon will convert to the low tetragonal polymorph reidite at shock stresses above ~21 GPa. However, upon decompression at temperatures above 1200 °C reidite will revert to zircon (Kusaba et al., 1985). Recrystallized zircon neoblasts encased in impact melt often show systematic misorientation relationships of 90° about <110> indicative of reversion from the reidite (Fig. 1), and preserving cryptic evidence of the high-P history that is often erased by the post shock thermal spike (Cavosie et al., 2016). Microstructural OR analysis of a dissociated zircon corona composed of baddeleyite (monoclinic-ZrO2) has identified the former presence of cubic zirconia within impact melt glass from the Mistastin Lake impact structure, Labrador, CA. Based on stability fields in the ZrO2-SiO2 binary phase diagram, cubic zirconia records thermal conditions in excess of 2370 °C at ambient P, indicating that the Mistastin impact melt is the hottest rock identified on Earth’s surface (Timms et al., 2017b). Shock-deformed monazite (monoclinic La,Ce,ThPO4) containing lamellae comprised of interlocking laths has been identified from the Haughton Dome impact structure, Nunavut, Canada and Nördlinger-Ries Crater, southern Germany. The lath-structured lamellae are composed of four systematic orientation variants, which OR analyses indicate originate from a tetragonal parent whereby the [010]monoclinic aligns with either [100] or [010]tetragonal (Erickson et al., 2019). These results highlight utility of microstructural phase heritage analyses for the identification of unstable high-P or high-T polymorphs that uniquely record the extremely transient shock conditions produced by hypervelocity impacts.

Timmons Erickson↗

Overview of the Dragonfly Entry Aerosciences Measurements (DrEAM) Suite

NASA Ames and Langley arepartnering with DLR to propose acomprehensive instrumentation suite known as the Dragonfly Entry Aerosciences Meas-urements (DrEAM). DrEAM being the first competed mission to fly EDL instrumentation as part of NASA’s Engineering Science Investigation (ESI).DrEAM will provide key aerothermodynamicdata and performance analysisfor Dragonfly’s forebody and backshell therma lprotection system (TPS),and also includes a DLR-provided Data Acquisition System(DAS).Titan’s atmosphere predominantly consists of nitro-gen (~98% by mole) with small amounts of methane(~2% by mole)and other trace gases. CN is a strong ra-diator and is found in nonequilibriumconcentrationsfor Titan entry. The accurate modeling of nonequilibrium CN radiation has proven to be a difficult task. Prompted by the Huygensmission, many experimental campaigns and analyses were performed to better understand the aerothermal environments experience by the probe dur-ing Titan entry[1].However, the Huygens probe carried no heatshieldinstrumentation. Therefore,the DrEAM instrumentation suite will significantly advance the state-of-the-art not only by documenting theenviron-ment and performance of Dragonfly’sentry system but also by making keymeasurements in Titan’s atmos-phere for thefirst time, thus providing new benchmark dataapplicable to entry science more generally. Current Measurement Goals: Aerothermal envi-ronments and TPS responsewill be measured using sen-sors similarto the Mars Entry, Descent, and Landing In-strumentation2 (MEDLI2) Integrated Sensor Plug(MISP) and the COMbined Aerothermaland Radiome-ter Sensor (COMARS)suite[2], with the latter supplied by DLR.For MEDLI2, MISP usedembedded thermo-couples (TCs) todirectly measure in-depth temperature of theTPS at several locations,which can also be used to infer surface environmentsvia inverse analysis. For DrEAM, the MISPstyle plugswill be known as Drag-onfly Sensors for Aero-Thermal Reconstruction (Drag-STR)plugs. On Schiaparelli, the COMARSsuite in-cludedthree total surface-mounted heatflux sensors, three pressure sensors, and one radiometer. For DrEAM, the COMARS package will be known as COmbined Sensor System for Titan Atmosphere (COSSTA). Atmospheric density measurements and capsuleaerodynamic data will be obtained throughthe onboard Inertial Measurement Unit (IMU),supple-mented by pressure transducers similar tothose used by the MEDLI Mars Entry AtmosphericData System (MEADS).The DrEAM pressure sensors will be known as Dragonfly Atmospheric Flight Transducers(DrAFT) Both DragSTR and DrAFThave flight heritagefrom MISP and MEADS on the MSLand Mars 2020mis-sions, and the COMARS suite successfullyflew on the ESA Schiaparelli EDMlander. A preliminary layout of the sensors is shown in Fig. 1. Because Dragonflyuses the same aeroshell provider (i.e., LockheedMartin) and materials for the TPS,with what are expected to be sim-ilar thicknesses as MSL and Mars 2020on both the heat shield and backshell, theDrEAMinstrumentation will look to utilize the same techniques and processes as de-veloped byMEDLI and MEDLI2for vehicle integra-tion. This commonality alsoenables DrEAMto lever-age the extensiveground test qualifications performed forMEDLI and MEDLI2 and claim substantial heritagefor this system.

A Brandis↗

DC Modeling of 4H-SiC JFET Gate Length Reduction at 500°C

The development of robust, high-performance integrated circuits (ICs) will enable numerous potential NASA missions of current interest, including long-duration robotic missions exploring the 460 °C surface of Venus. Currently, NASA is looking towards SiC-based devices to provide such a solution. However, the current NASA silicon carbide (SiC) JFET device with a channel length of 6μm (for recently fabricated Gen. 11 ICs) limits on mission relevant circuit capabilities [1]. In this study, we combined experiments with simulations to explore two straightforward fabrication strategies to reduce the SiC JFET channel length while maintaining turn-off behavior (Fig. 1a) needed to realize 500 °C circuit operation. The first fabrication strategy uses a shallow self-align nitrogen implant (Figure 1b) along the device's top surface but not below the gate combined with a high-dose phosphorous implant directly below the source and drain contacts. For the second fabrication strategy (Figure 1c), the high-dose phosphorous implants extended from below the contacts all the way up to the gate edges. Simulations guided gate length reductions without significant degradation in the turn-off performance. In total 12 SiC JFET variants implementing using the different fabrication strategies, gate lengths, and n-channel epilayer thickness were implemented in our simulation framework implemented in COMSOL. Since the COMSOL database does not have the material properties for 4H-SiC, these parameters were taken from the literature and implemented in COMSOL. The empirical models [2] for incomplete ionization, Auger recombination, low field mobility, and Shockley-Read-Hall recombination were implemented to account for material-specific device behavior.

4H-SiC JFET↗