Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Experimental Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Optical resonant ultrasound spectroscopy for spherical target characterization

A new non-contact resonant ultrasound spectroscopic technique is employed to determine the response characteristics of spherical fusion targets, with particular emphasis on both the displacement sensitivity and frequency response of the technique. The optical experimental method is based on photorefractive optical lock-in detection scheme with narrow bandwidth amplification to measure phase variations in light scattered from optically rough, continuously vibrating surfaces with very high, linear sensitivity and a noise level on the order of 10.6 nanometers RMS. This high sensitivity is needed to determine the vibrational modes of the gas inside an spherical target separately from the elastic modes of the containment shell. These measurements can be used to calculate the pressure and density of the internal gas. This approach is also used to discriminate between nearly-degenerate resonant modes characteristic of the frequency spectrum when the target fabrication is inadequate (non-uniform shell thickness, misalignment of hemispheres) or when the Deuteriumrrritium solid fuel inside the target is not symmetrically distributed at cryogenic temperatures. Asymmetries in the fuel layering and geometric perturbations disturb the target implosion process creating deleterious effects in fusion energy generation. The technique is applied to determine the modal characteristics of a target sphere with known response from 100 KHz to 450 KHz. The results demonstrate the unique capabilities of the optical lock-in detection method to measure very small resonant ultrasonic signals.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

LASER WAKEFIELD ACCELERATION BEYOND 1 GeV USING IONIZATION INDUCED INJECTION*

A series of laser wake field accelerator experiments leading to electron energy exceeding 1 GeV are described. Theoretical concepts and experimental methods developed while conducting experiments using the 10 TW Ti:Sapphire laser at UCLA were implemented and transferred successfully to the 100 TW Callisto Laser System at the Jupiter Laser Facility at LLNL. To reach electron energies greater than 1 GeV with current laser systems, it is necessary to inject and trap electrons into the wake and to guide the laser for more than 1 cm of plasma. Using the 10 TW laser, the physics of self-guiding and the limitations in regards to pump depletion over cm-scale plasmas were demonstrated. Furthermore, a novel injection mechanism was explored which allows injection by ionization at conditions necessary for generating electron energies greater than a GeV. The 10 TW results were followed by self-guiding at the 100 TW scale over cm plasma lengths. The energy of the self-injected electrons, at 3 x 10{sup 18} cm{sup -3} plasma density, was limited by dephasing to 720 MeV. Implementation of ionization injection allowed extending the acceleration well beyond a centimeter and 1.4 GeV electrons were measured.

42 ENGINEERING↗

In the Shoes of a Researcher [Conférence "Dans la peau d'un chercheur"]

In Geneva, 10,000 physicists from CERN investigate.They pursue research on elementary particles so tiny and fleeting that they cannot be directly studied. A few kilometers from CERN, at the University of Geneva, other physicists explore mysterious phenomena. What do they do? "In the shoes of a researcher" proposes to elementary teachers and their students to experience an investigation similar to what the physicists do. Each class will receive mysterious boxes which are impossible to open. The classes must perform an investigation in order to understand what is within the boxes by proposing hypotheses followed by experiments. The 33 participating classes will be in contact with scientists to help in confronting their ideas and their trials and errors and to ask questions on a website. The classes will then go meet the physicists to compare their experimental methods with those shown at CERN or at the University of Geneva. The project will end with a conference with these researchers in the making, done in the style of scientists. The students will present their results at the conference. In this video, researchers from CERN speak with the students about what they discovered, and help the students to think scientifically and understand how science works. There are also video clips of the students performing the experiments.

99 GENERAL AND MISCELLANEOUS↗

A Terrestrial Search for Dark Contents of the Vacuum, Such as Dark Energy, Using Atom Interferometry

We describe the theory and first experimental work on our concept for searching on earth for the presence of dark contents of the vacuum (DCV) using atom interferometry. Specifically, we have in mind any DCV that has not yet been detected on a laboratory scale, but which might manifest itself as dark energy on the cosmological scale. The experimental method uses two atom interferometers to cancel the effect of earth's gravity and diverse noise sources. It depends upon two assumptions: first, that the DCV possesses some space inhomogeneity in density, and second that it exerts a sufficiently strong nongravitational force on matter. The motion of the apparatus through the DCV should then lead to an irregular variation in the detected matter-wave phase shift. We discuss the nature of this signal and note the problem of distinguishing it from instrumental noise. We also discuss the relation of our experiment to what might be learned by studying the noise in gravitational wave detectors such as LIGO. The paper concludes with a projection that a future search of this nature might be carried out using an atom interferometer in an orbiting satellite. The laboratory apparatus is now being constructed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of Charge Transport Mechanisms in ZnO-ZnTe Nanojunctions

Improved carrier transport is crucial for enhancing the performance of semiconductor devices such as radiation detectors. Conventionally, semiconductor devices employ planar p-n junctions in which carrier loss occurs mostly in the p-type and n-type diffusion regions. In a nanoscale three-dimensional (3-D) junction, the carriers can be efficiently collected cross the nanostructure by electric field distribution without trapping in the p-n regions. In addition, a nanocone junction should further improve carrier transport properties because this structure can be tailored to be completely depleted. In this work, we studied carrier transport mechanisms in nanojunctions made of vertically aligned ZnO nanostructures and ZnTe matrix using theoretical and experimental methods.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Study on Electro-Polishing Process by Niobium-Plate Sample With Artificial Pits

The Electro-polishing (EP) process is the best candidate of final surface-treatment for the production of ILC cavities. Nevertheless, the development of defects on the inner-surface of the Superconducting RF cavity during EP process has not been studied by experimental method. We made artificial pits on the surface of a Nb-plate sample and observed the development of the pit-shapes after each step of 30um-EP process where 120um was removed by EP in total. This article describes the results of this EP-test of Nb-sample with artificial pits.

36 MATERIALS SCIENCE↗

Aberration-corrected X-ray spectrum imaging and Fresnel contrast to differentiate nanoclusters and cavities in helium-irradiated alloy 14YWT

Helium accumulation negatively impacts structural materials used in neutron-irradiated environments, such as fission and fusion reactors. Next-generation fission and fusion reactors will require structural materials, such as steels, resistant to large neutron doses yet see service temperatures in the range most affected by helium embrittlement. Previous work has indicated the difficulty of experimentally differentiating nanometer-sized helium bubbles from the Ti-Y-O rich nanoclustsers (NCs) in radiation-tolerant nanostructured ferritic alloys (NFAs). Because the NCs are expected to sequester helium away from grain boundaries and reduce embrittlement, experimental methods to study simultaneously the NC and bubble populations are needed. In this study, aberration-corrected scanning transmission electron microscopy (STEM) results combining high-collection-efficiency X-ray spectrum images (SIs), multivariate statistical analysis (MVSA), and Fresnel-contrast bright-field STEM imaging have been used for such a purpose. Results indicate that Fresnel-contrast imaging, with careful attention to TEM-STEM reciprocity, differentiates bubbles from NCs, and MVSA of X-ray SIs unambiguously identifies NCs. Therefore, combined Fresnel-contrast STEM and X-ray SI is an effective STEM-based method to characterize helium-bearing NFAs.

Miller, Michael K↗

Experimental Evaluation of Actinide Transport in a Fractured Granodiorite

The objective of this study was to demonstrate and evaluate new experimental methods for quantifying the potential for actinide transport in deep fractured crystalline rock formations. We selected a fractured granodiorite at the Grimsel Test Site (GTS) in Switzerland as a model system because field experiments have already been conducted with uranium and additional field experiments using other actinides are planned at the site. Thus, working on this system provides a unique opportunity to compare lab experiment results with fieldscale observations. Rock cores drilled from the GTS were shipped to Los Alamos National Laboratory, characterized by x-ray diffraction and microscopy, and used in batch sorption and column breakthrough experiments. Solutions with pH 6.8 and 8.8 were tested. Solutions were switched to radionuclide-free synthetic Grimsel groundwater after near-steady actinide/colloid breakthrough occurred in column experiments. We are currently evaluating actinide adsorption/desorption rates as a function of water chemistry (initial focus on pH), with future testing planned to evaluate the influence of carbonate concentrations, flow rates, and mineralogy in solutions and suspensions with bentonite colloids. (auth)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

ROLE OF SCALE FACTOR DURING TENSILE TESTING OF SMALL SPECIMENS

The influence of scale factor (tensile specimen geometry and dimensions) on mechanical test results was investigated for different widely used types of small specimens (SS-1, SS-2, SS-3, and SS-J3) and a set of materials. It was found that the effect of scale factor on the accurate determination of yield stress, ultimate tensile stress, and uniform elongation values was weak; however, clear systematic differences were observed and should be accounted for during interpretation of results. In contrast, total elongation values were strongly sensitive to variations in specimen geometry. Modern experimental methods like digital image correlation allow the impact of scale factor to be reduced. Using these techniques, it was shown that true stress true strain curves describing strain-hardening behavior were very close for different specimen types. The limits of miniaturization are discussed, and an ultra-miniature specimen concept was suggested and evaluated. This type of specimen, as expected, may be suitable for SEM and TEM in situ testing.

Gussev, Maxim N↗

Free Energy and Heat Capacity

Free energy and heat capacity of actinide elements and compounds are important properties for the evaluation of the safety and reliable performance of nuclear fuel. They are essential inputs for models that describe complex phenomena that govern the behaviour of actinide compounds during nuclear fuel fabrication and irradiation. This chapter introduces various experimental methods to measure free energy and heat capacity to serve as inputs for models and to validate computer simulations. This is followed by a discussion of computer simulation of these properties, and recent simulations of thermophysical properties of nuclear fuel are briefly reviewed.

free energy↗

Phase-Space Analysis using Tomography for the Muon g-2 Experiment at Fermilab

In the next decade the Fermilab Muon Campus will host two world class experiments dedicated to the search for signals of new physics. The Muon g-2 experiment will determine with unprecedented precision the anomalous magnetic moment of the muon. The Mu2e experiment will improve by four orders of magnitude the sensitivity on the search for the as-yet unobserved Charged Lepton Flavor Violation process of a neutrinoless conversion of a muon to an electron. Maintaining and preserving a high density of particles in phase-space is an important requirement for both experiments. This paper presents a new experimental method for mapping the transverse phase space of a particle beam based on tomographic principles. We simulate our technique using a GEANT4 based tracking code, to ascertain accuracy of the reconstruction. Then we apply the technique to a series of proof-of-principle simulation tests to study injection and transport of muon beams for the Fermilab Muon Campus.

43 PARTICLE ACCELERATORS↗

Capturing Nucleation at 4D Atomic Resolution

Nucleation plays a critical role in many physical and biological phenomena ranging from crystallization, melting and evaporation to the formation of clouds and the initiation of neurodegenerative diseases. However, nucleation is a challenging process to study especially in the early stage when several atoms/molecules start to form a new phase from its parent phase. Here, we advance atomic electron tomography to study early stage nucleation at 4D atomic resolution. Using FePt nanoparticles as a model system, we reveal that early stage nuclei are irregularly shaped, each has a core of a maximum order parameter, and an order parameter gradient points from the core to the boundary of the nucleus. We capture the structure and dynamics of the same nuclei undergoing growth, fluctuation, dissolution, merging and/or division, which are regulated by the distribution of the order parameter and its gradient. These experimental results differ from classical nucleation theory (CNT) and to explain them we propose an order parameter gradient model, which is more general and thermodynamically more favourable than CNT. We further corroborate this model using molecular dynamics simulations of heterogeneous and homogeneous nucleation in the liquid-solid phase transition of Pt. Here, we anticipate that the order parameter gradient model is applicable to different kinds of nucleation processes and our experimental method opens the door to study the structure and dynamics of materials with 4D atomic resolution.

74 ATOMIC AND MOLECULAR PHYSICS↗

The Majorana Demonstrator Status and Initial Results

The Majorana Collaboration is using an array of high-purity Ge detectors to search for neutrinoless double-beta decays in 76Ge. Searches for neutrinoless double-beta decay are understood to be the only viable experimental method for testing the Majorana nature of the neutrino. Observation of this decay would imply violation of lepton number, that neutrinos are Majorana in nature, and could provide information on the neutrino mass. The Majorana Demonstrator comprises 44.1 kg of p-type point-contact Ge detectors (29.7 kg enriched in 76Ge) surrounded by a low-background shield system. The experiment achieved a high efficiency of converting raw Ge material to detectors, and an unprecedented detector energy resolution of 2.5 keV FWHM at Qßß. The Majorana collaboration began taking physics data in 2016. This paper summarizes key construction aspects of the Demonstrator and shows preliminary results from initial data.

Yu, Chang-Hong↗

Materials Engineering & Manufacturing Research

The Department of Energy’s (DOE) National Energy Technology Laboratory’s (NETL) Materials Engineering and Manufacturing (MEM) Core Competency Directorate delivers functional and structural materials solutions to enable advanced energy systems and technologies. NETL is internationally recognized for its leadership and ability to design and develop materials for extreme environment applications. NETL uses a one-of-a-kind suite of computational and experimental methods for translating new material-science concepts into practical technologies, and boasts advanced tools and unique facilities, across all materials classes.<p><br></p>

Albenze, Erik↗

Snowmass2021 Cosmic Frontier White Paper: Dark Matter Physics from Halo Measurements

The non-linear process of cosmic structure formation produces gravitationally bound overdensities of dark matter known as halos. The abundances, density profiles, ellipticities, and spins of these halos can be tied to the underlying fundamental particle physics that governs dark matter at microscopic scales. Thus, macroscopic measurements of dark matter halos offer a unique opportunity to determine the underlying properties of dark matter across the vast landscape of dark matter theories. This white paper summarizes the ongoing rapid development of theoretical and experimental methods, as well as new opportunities, to use dark matter halo measurements as a pillar of dark matter physics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

HEAT TRANSFER ASPECTS OF TWO PISTON SPLAT QUENCHING

This thesis investigates the heat transfer aspects of the two-piston splat quench system by modifying surface roughness and by using copper and stainless steel platens. In additive manufacturing, specifically selective laser melting (SLM), metal is subjected to a very rapid heating and cooling that produces cooling rates in the range from 105-106 °C/s. This rapid solidification produces microstructures that deviate far from equilibrium. Splat quenching is an experimental method that produces rapidly solidified structures under cooling rates that are comparable to those found in additive manufacturing. The splat quenching approach allows for more efficient testing of the rapid solidification behavior of a wide variety of alloys. In this thesis, two platen characteristics, surface roughness and material thermal conductivity, were examined to determine their role in controlling the heat transfer and the subsequent cooling rate during splat quenching of austenitic stainless steel 316L. To that objective, 5 surface finishes were produced using metallographic techniques, from 7046-203 Å Rms. Copper and 316L stainless steel platen material were used to reach different levels of thermal conductance. The combination of these 2 variables created 10 scenarios, which were examined using, backscatter imaging, secondary imaging, and electron back scatter diffraction. Cooling rates were estimated using cell sizing obtained through electrolytic etching and secondary imaging. This thesis determined that both surface modification and changes in material type had a statistically significant impact on the cell sizes observed. Where material type far outweighed surface roughness in its effect on cell size.

Roze, Jonathan↗

Overview of Parity Violation and Fundamental Symmetries

The fields of nuclear and particle physics have undertaken extensive programs of research to search for evidence of new phenomena via the precision measurement of observables that are well predicted within the standard model of electroweak interaction. The standard model is known to be incomplete as it does not include gravity and dark matter/energy and therefore likely the low energy approximation of a more complex theory. This talk will be an overview of the motivation, experimental method and status of some of these efforts (past and future) related to precision in-direct searches that are complementary to the direct searches currently underway at the Large Hadron Collider.

Carlini, Roger↗