SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Analytic procedure evaluates cost of combining absorption-cycle chiller with solar-energy system in residential or commercial application. Procedure assumes that solar-energy system already exists to heat building and that cooling system must be added. Decision is whether to cool building with conventional vapor-compression-cycle chiller or to use solar-energy system to provide heat input to absorption chiller.
The Solar Energy System was installed as a part of a new construction of a college building. The building will house classrooms and laboratories, administrative offices and three lecture halls. The Solar Energy System consists of 4,096 square feet (128 panels) Owens/Illinois Evacuated Glass Tube Collector Subsystem, and a 5,000 gallon steel tank below ground storage system. Hot water is circulated between the collectors and storage tank, passing through a water/lithium bromide absorption chiller to cool the building.
Despite their advantages, distributed energy resources (DERs) bring inherent uncertainty and variability into the landscape of modern power systems. As DER penetration grows, conventional generators like hydropower plants have to respond more often to arrest the imbalance in the net load. Hydropower turbines provide their best operational performance with minimal wear and tear when operating at regions of maximum efficiency. However, the current needs for hydropower plants require them to operate under varying load conditions and thus sub-optimal operating points leading to additional stress. To relieve the hydropower plants, this paper proposes a hybridization strategy where a hydropower unit is paired with an energy storage system (ESS) to increase operational flexibility and mitigate damage to the hydro plant. Models are developed to represent the operation of the hybrid system, quantify degradation, and assess economic benefits. Moreover, an innovative controller disaggregates the market dispatch signal into separate control setpoints for the ESS and hydropower unit. In case studies performed on a real-world hydropower facility, it was found that the ESS-based hybridization can extend the life of the hydropower plant by 5% on average. Notably, the economic benefits from reduced maintenance and deferred investment are estimated to be around $3.6 million.
While quantum computing (QC) is considered as a paradigm shift in our basic understanding of physical computation, effective implementation of QC in energy applications also depends on progress and development in the dimensions of both QC hardware and algorithms. To fully address the status and future challenges of QC applied within the energy sector, in this presentation, we firstly summarize recent advancements on the applications of QC to energy infrastructure and materials, complex energy system processes, advanced manufacturing, and energy system security. Then, we will demonstrate the results of QC performed both on a simulator and a quantum device targeting on energy-related applications.
A techno-economic study is performed to assess the feasibility of molten chloride salt thermal energy storage (TES) systems for next generation concentrating solar power. Refractory liners internally insulate tanks to allow tank shells to be constructed from carbon steel. The liner must not be wetted by salt to maintain predictable thermal properties and manageable heat loss out of the tank. The commercial scale tank liner is an anchored brick and mortar design with expansion joints to accommodate thermal expansion. Furthermore, finite element analysis is performed to optimize the thermal and mechanical profile of the tank. Equalizing the shell temperature between the water-cooled foundation and the shell wall is necessary to minimize differential thermomechanical stress and lower overall stress values below industrial allowable limits. The cost of the TES system is estimated to be $60/kWhth, which is four times greater than Department of Energy targets. Solutions to reduce system cost and overall risk are proposed.
Machine learning control (MLC) is a highly flexible and adaptable method that enables the design, modeling, tuning, and maintenance of building controllers to be more accurate, automated, flexible, and adaptable. The research topic of MLC in building energy systems is developing rapidly, but to our knowledge, no review has been published that specifically and systematically focuses on MLC for building energy systems. Here this paper provides a systematic review of MLC in building energy systems. We review technical papers in two major categories of applications of machine learning in building control: (1) building system and component modeling for control, and (2) control process learning. We identify MLC topics that have been well-studied and those that need further research in the field of building operation control. We also identify the gaps between the present and future application of MLC and predict future trends and opportunities.
Growing interest in quantum computing and simulations have created opportunities for its deployment to improve processes pertaining to energy production, distribution, and consumption. While quantum computing is considered as a paradigm shift in our basic understanding of physical computation, effective implementation of quantum computing in energy applications also depends on progress and development in the dimensions of both quantum computing hardware and quantum computing algorithms. To fully address the status and future challenges of quantum information science (QIS) applied within the energy sector, in this presentation, we firstly summarize recent advancements on the applications of quantum computing to energy infrastructure and materials, complex energy system processes, advanced manufacturing, and energy system security. Then, we will demonstrate the results of quantum computing both on a simulator and a quantum device accessing from OLCF. Our first example is to use the variational quantum eigensolver (VQE) with a unitary coupled cluster with singles and doubles (UCCSD) ansatz to simulate a series of LixHyq molecules (q=-1, 0, +1). The obtained results showed that the quantum computing VQE-UCCSD is comparable to classical CCSD for small systems like LiH with respect to full configuration interaction (FCI). Targeting on CO2 capture application, our second example is to use VQE to quantify molecular vibrational energies and reaction pathways between CO2 and a simplified amine-based solvent model—NH3 to form H2NCOOH. This research showcases quantum computing applications in the study of CO2 capture reactions.
Under the "Advanced Research on Integrated Energy Systems" (ARIES) initiative, hydrogen system capabilities including a MW-scale electrolyzer, storage system, and MW-scale fuel cell generator will be designed and commissioned at NREL's Flatirons Campus. This hydrogen infrastructure will support H2@Scale goals by enabling integrated systems R&D to study the science of scaling for hydrogen energy systems. The system is designed with flexibility to provide a testbed to demonstrate systems integration, grid services, energy storage, direct renewable hydrogen production, and innovative end use applications (e.g. HD transportation, natural gas blending, etc.).
Islanded microgrids are vulnerable to frequency fluctuations due to the presence of low-inertia distributed energy resources (DERs). Moreover, implementation of both synchronous-based and inverter-based DERs with a significant difference in inertia leads to a power imbalance between generation and consumption during transients. This results in frequency variations which might have severe consequences such as blackouts. This paper develops a control scheme for battery energy storage systems (BESSs) to enhance the dynamic response of islanded microgrids by mitigating the frequency fluctuations. A piecewise linear-elliptic (PLE) droop characteristic is proposed and employed in BESS to achieve a faster power balance between generation and consumption during transients, resulting in enhanced frequency responses. Different case studies are carried out to validate the viability of the proposed approach in improving the dynamics of islanded microgrids.
The authors describe recent progress in the development of a 500-Wh magnetically suspended flywheel stack energy storage system. The design of the system and a critical study of the noncontacting displacement transducers and their placement in the stack system are discussed. The storage system has been designed and constructed and is currently undergoing experimental analysis. The results acquired from the noncontacting displacement transducer study show that currently available transducers will not function as desired and that further research is essential.
While batteries of various chemistries have been responsible for powering everything from small electronics to cars to medical devices, the need for energy storage continues to increase. This increase is in both volume and in scale, as energy storage systems are increasingly being evaluated for inclusion into both larger and broader applications. An important factor to consider with batteries is the end application, as each chemistry and battery system has specific benefits as well as limitations. This necessitates development of a wide range of battery chemistries as well as substantive improvements to these chemistries and their integration on the material, electrode, and systems level. Herein, this work will present on a multi-scale level, different energy storage studies can that are geared to address the demands and needs of varying applications. To highlight the diversity and uniqueness of the required breadth of approaches, several systems are presented in combination with different characterization techniques and analysis relevant to the system. Highlights include proof of concept and development of a self - forming, rechargeable solid state battery, materials development for Lithium Sulfur (Li-S) batteries, electrochemical and characterization techniques to elucidate materials properties, and utilizing theoretical calculations to compliment experimental observations.
This paper presents a sustainable and innovative wave-energy-based water desalination system combined with an emerging supercritical water process for a zero-liquid-discharge technology. There is growing demand for producing clean water. Within desalination technologies, reverse osmosis, one of the most popular methods, uses a semipermeable membrane that separates fresh water from pressurized seawater. However, this technology produces brine, which is harmful to the environment. Supercritical water desalination is employed here as a means of using the brine to extract more fresh water and eliminate this environmentally toxic output. Wave energy is integrated with reverse osmosis to provide direct seawater pressurization for the first stage in the process. This wave energy converter converts the motion of waves into pressurized water through a power takeoff unit.
This poster describes efforts to analyze cycle performance of particle pumped thermal energy storage (PTES) system with concentrating solar power (CSP).
Molten salts have favorable material properties for use in high-temperature energy systems, including thermal energy storage systems, concentrating solar power plants, nuclear reactors, and various industrial manufacturing processes. Knowledge of chemical and thermophysical property data is essential for the design and optimization of these systems, yet data are often limited or uncertain for many candidate salts due to the difficulty of thermophysical property measurements at relevant temperatures (e.g., 500–900 °C). Here, the density of molten LiF-NaF-KF eutectic is reassessed through review of previous experimental data, new density measurements from 470 to 800 °C, and semiempirical modeling. Additionally, the density was measured using the displacement technique. Compositional and temperature-dependent density estimates were calculated with a multidimensional Redlich–Kister model. The results of the new experimental measurements agree within 2% of the modeled density of molten eutectic LiF-NaF-KF. The Redlich–Kister model’s prediction shows a near-ideal density behavior for the LiF-NaF-KF system and is promising for the estimation of off-eutectic LiF-NaK-KF densities. Finally, through review of the existing literature and comparison to new measurements, recommendations are made for the density of LiF-NaF-KF.
This paper presents the work performed to develop a multiring composite material flywheel and improvements of a magnetically suspended energy storage system. The flywheel is constructed of filament would graphite/epoxy and is interference assembled for better stress distribution to obtain higher speeds. The stationary stack in the center of the disk supports the flywheel with two magnetic bearings and provides power transfer to the flywheel with a motor/generator. The system operates under a 10(exp -4) torr environment and has been demonstrated to 20,000 rpm with a total stored energy of 15.9 Wh. When this flywheel cycles between its design speeds (45,000 to 90,000 rpm), it will deliver 242 Wh and have a usable specific energy density of 42.6 Wh/kg.
Contents - NASA Future Power Systems - DC Microgrid with Distributed Battery Energy Storage - A simplified gateway power system - Droop Control (Primary Control) - Distributed battery units, droop control, and load sharing characteristics - Simulation results - Three-Level Hierarchical Control of Distributed Battery Units During Eclipse - Secondary Control - Objective and definition of unit control error - Implementation of secondary control - Simulation results - Tertiary Control - Schedule BU current sharing with the objective of equal SoC - Simulation results•Conclusions
Almost all future energy systems (advanced nuclear reactors, fusion energy system, concentrating solar-thermal power (CSP), and wind technologies) are limited by degradation of key material systems exposed to multiple environmental stressors. The degradation during exposure to high temperatures, radiation, mechanical loading, and chemical attack is often dictated by mechanisms active at the microstructural level. The nature of these mechanisms and the associated variations between sequential and concurrent interplay can be explored if the transmission electron microscope (TEM) is utilized as a toolbox for exploration [1]. One such tool developed at Sandia National Laboratories to couple several of these environments is the In situ Ion Irradiation TEM (I3TEM) [2]. Several studies over the last decade utilizing this tool have shown that the scientific intuition developed over decades of sequential experiments is not always a good indicator of concurrent mechanisms or failure routes. This presentation will highlight the recent and planned additions into the I3TEM facility of a Waviks gas injection system and Raman system, respectively, as can be seen in Fig. 1, permitting environmental degradation from gas species leaked into the pole piece region during quantitative mechanical loading (indentation, monotonic loading, high temperature creep, irradiation induced creep, and high-cycle fatigue); multi-beam ion irradiation (energies ranging from 1 keV to 48 MeV and species from H to Au); laser exposure (20 W and 1064 nm), or various combinations thereof that are already possible [3]. This addition permits the facility to explore both sequential or concurrently the four axes of stressors: thermal, mechanical, radiation, and chemical. This information can be directly coupled to modeling, expediting the refinement and validation of both atomistic and mesoscale models.
This article describes a collaboration between the U.S. Department of Energy and the International District Energy Association (IDEA) to document best practices in district energy systems. The initiative focuses on analyzing real-world performance data and highlighting effective strategies for improving efficiency, integrating renewable energy, and supporting decarbonization efforts. It highlights case studies from the University of California, Davis, and Princeton University to show how long-term master planning, phased project implementation, and strong financial analysis can drive successful transitions to more sustainable energy systems. U.C. Davis emphasizes incremental, results-driven planning and pilot projects, while Princeton focuses on aligning climate goals with financially viable infrastructure investments and life-cycle cost analysis. Overall, the article demonstrates that combining strategic planning, data-driven decision-making, and financial accountability is essential for advancing sustainable district energy systems.