Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELASTICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Elasticity of davemaoite as a primary contributor to lower-mantle heterogeneities

Geophysical detection of subducted mid–ocean ridge basalt (MORB) in the lower mantle is hindered by uncertainties in the elasticity of Fe,Al,Mg,Ti–bearing davemaoite, a key MORB component. Using Brillouin spectroscopy and x-ray diffraction, we determined the elasticity of a Ca 0.906(1) Fe 2+ 0.027(1) Fe 3+ 0.042(1) Mg 0.033(1) Al 0.072(1) Ti 0.020(1) Si 0.912(1) O 3 davemaoite up to 113 gigapascals and 2294 K. Here, we found that it exhibited a shear wave velocity 10 to 20% slower than end-member davemaoite, making it the slowest phase among major lower-mantle minerals. Our models show that MORB, containing 20 to 25 volume percent davemaoite, potentially contributes to large low-shear-velocity provinces (LLSVPs), whereas a cumulate layer enriched in davemaoite crystallized from basal magma ocean may comprise ultralow-velocity zones (ULVZs). Davemaoite’s ability to host incompatible and heat-producing elements possibly links LLSVPs and ULVZs to mantle plume initiation and geochemical signatures of ocean island basalts.

Zhou, Wen-Yi [Texas A & M Univ., College Station, ↗

Difference in the behavior of the limiting elastic moduli in high-viscosity fluids with different molecular anisotropies

The experimentally detected difference in the behavior of the high- and low-frequency limiting elastic moduli in high-viscosity fluids that have almost spherical (isotropic) and elongated (anisotropic) molecules and can easily be supercooled and vitrified is discussed. This difference is shown to be related to anisotropy-tensor fluctuations. The observed characteristic temperature dependence of the relaxation time of the anisotropy tensor is explained, and the cause of the linear temperature dependence of the limiting elastic moduli in such fluids is revealed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mechanism of elastic and inelastic proton scattering on a {sup 15}C nucleus in diffraction theory

The amplitudes for elastic and inelastic proton scattering on the neutron-rich nucleus {sup 15}C (to its J{sup {pi}} = 5/2{sup +} level in the latter case) in inverse kinematics were calculated within Glauber diffraction theory. First- and second-order terms were taken into account in the multiple-scattering operator. The {sup 15}C wave function in the multiparticle shell model was used. This made it possible to calculate not only respective differential cross sections but also the contribution of proton scattering on nucleons occurring in different shells. The differential cross sections for elastic and inelastic scattering were calculated at the energies of 0.2, 0.6, and 1 GeV per nucleon.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effect of the tensor part of Skyrme interaction on the description of elastic nucleon-nucleus scattering on the basis of the optical model

A microscopic optical nucleon-nucleus potential constructed on the basis of calculating the mass operator for the single-particle Green's function with Skyrme nucleon-nucleon forces was used to study the effect of the tensor part of Skyrme forces on describing differential cross sections for elastic nucleon-nucleus scattering and the structure of nuclei within a self-consistent approach. It was shown that an increase in the tensor terms of nucleon-nucleon forces impaired the description of nucleon-nucleus scattering within the model being considered. The parameters of Skyrme forces were optimized on the basis of an analysis of cross sections for neutron-nucleus scattering, the properties of nuclear matter and the structure of nuclei being tested in doing this. This optimization led to nucleon-nucleon force versions where the tensor part was small or zero and which described satisfactorily the structure of nuclei and cross sections for elastic neutron and proton scattering on nuclei over a broad range of target mass numbers.

74 ATOMIC AND MOLECULAR PHYSICS↗

The least number of pairs of layers needed for observation of satellite-structured X-ray diffraction in superlattices. Measurements and calculations of elastic stresses in alternate layers of superlattices

The Al{sub x}Ga{sub 1-x}As/GaAs.../GaAs(001) superlattices with the period T{>=}100 nm are studied by X-ray diffractometry and topography. It is shown that, to observe satellite peaks essential for identification and measurements of the parameters for superlattices on single-crystal substrates in the X-ray diffraction spectra, it is sufficient to grow only two pairs of alternate Al{sub x}Ga{sub 1-x}As/GaAs layers. The X-ray diffraction technique allows for the observation and measurements of the parameters for elastically and plastically strained superlattices. The theoretical basis is presented, and the elastic stresses in the alternate layers of the Al{sub x}Ga{sub 1-x}As/GaAs.../GaAs(001) superlattices are calculated. The results are as follows: for N{sub 1} = 10 pairs of layers, the stresses are {sigma}{sub 2N} = 4.37 x 10{sup 5} Pa and {sigma}{sub 2N-1} = -4.37 x 10{sup 7} Pa; for N{sub 2} = 2 pairs of layers, 2{sigma}{sub 2N} = 6.16 x 10{sup 6} Pa and {sigma}{sub 2N-1} = -2.8 x 10{sup 7} Pa. The stress {sigma}{sub 2N-1} = -4.37 x 10{sup 7} Pa induces plastic deformation in the allo layers of the superlattice with the number of pairs of layers N{sub 1} = 10.

36 MATERIALS SCIENCE↗

Ab initio studies of structural, electronic, optical, elastic and thermal properties of CuGaTe{sub 2}

We have performed ab initio calculations for the structural, electronic, optical, elastic and thermal properties of CuGaTe{sub 2}. In this study, we used an accurate full potential linearized augmented plane wave (FP-LAPW) method to find the equilibrium structural parameters and to compute the full elastic tensors. We report electronic and optical properties with the recently developed density functional of Tran and Blaha. Furthermore, optical features such as dielectric functions, refractive indices, extinction coefficient, optical reflectivity, absorption coefficients, optical conductivities, were calculated for photon energies up to 30 eV. The thermodynamical properties such as Debye temperature, entropy and Gruneisen parameter, bulk modulus and hardness were calculated employing the quasi-harmonic Debye model at different temperatures (0–1000 K) and pressures (0–8 GPa) and the silent results were interpreted. Most of the investigated parameters are reported for the first time.

36 MATERIALS SCIENCE↗

McCurdy’s Effects in the Thermal Conductivity of Elastically Anisotropic Crystals in the Mode of Knudsen Phonon-Gas Flow

The influence of phonon focusing on phonon transport in semiconductor and dielectric crystals with different types of elastic-energy anisotropy at low temperatures is investigated. McCurdy’s effects in the thermal conductivity of elastically anisotropic crystals in the mode of Knudsen phonon gas flow are calculated. The influence of phonon focusing on the propagation and boundary scattering of phonons in samples with square and rectangular cross sections is analyzed, and a physical explanation of McCurdy’s effects is given.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analytical Expression for the Distribution of Elastic Strain Created by a Polyhedral Inclusion with Arbitrary Eigenstrain

Analytical expressions for the displacement vector, stain tensor, and Eshelby tensor have been obtained in the case where an inclusion in an elastically isotropic infinite medium has a polyhedral shape. The eigenstrain (e.g., the lattice mismatch) is assumed to be constant inside the inclusion but not obligatorily hydrostatic. The obtained expressions describe the strain both inside the inclusion and in its environment. It has been shown that a complex three-dimensional configuration of the elastic strain field (as well as of the displacement vector field) is reduced to a combination of simple functions having an illustrative physical and geometrical interpretation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radiative corrections beyond the ultra relativistic limit in unpolarized ep elastic and Møller scatterings for the PRad Experiment at Jefferson Laboratory

The clear 7σ discrepancy between measurements of the proton charge radius from muonic hydrogen Lamb shifts and those from hydrogen Lamb shift and electron scattering lead to both intense theoretical and experimental efforts to understand and explain this difference. In this regard, a new experiment (PRad) based on unpolarized ep elastic scattering cross section measurements normalized to Møller scattering is underway at Jefferson Laboratory to extract the proton charge radius based on new proton electric form factor down to values of momentum transfer squared Q 2 , as low as 10 -4 GeV/c) -2 . Reaching the precision of the experiment in such a small Q 2 region requires reliable knowledge of radiative corrections. In this paper, we present a complete calculation of radiative corrections for unpolarized elastic ep and Møller scatterings performed within a covariant formalism resulting in the set of explicit formulas beyond the ultra relativistic approximation (m e 2 ≪ Q 2 ), and numerical results for the kinematics of the PRad experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Spin-dependent Pomeron and Odderon in elastic proton–proton scattering

We introduce a new model of near-forward elastic proton-(anti)proton scattering at high energy based on the modern formulation of Pomeron and Odderon in terms of Wilson lines and generalized TMDs (GTMDs). We compute the helicity-dependent elastic amplitudes $\phi$1,2,3,4,5 in this model and study their energy dependence from the nonlinear small-x evolution equations. While both Pomeron and Odderon contribute to helicity-flip processes in general, in the forward limit t = 0 only the double helicity-flip amplitude $\phi$2, dominated by the spin-dependent Odderon, survives. This may effect the extraction of the ρ parameter as well as the total cross section in the LHC energy domain and beyond

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Direct comparison of elastic incoherent neutron scattering experiments with molecular dynamics simulations of DMPC phase transitions

Neutron scattering techniques have been employed to investigate 1,2-dimyristoyl-sn-glycero-3- phosphocholine (DMPC) membranes in the form of multilamellar vesicles (MLVs) and deposited, stacked multilamellar-bilayers (MLBs), covering transitions from the gel to the liquid phase. Neutron diffraction was used to characterise the samples in terms of transition temperatures, whereas elastic incoherent neutron scattering (EINS) demonstrates that the dynamics on the sub-macromolecular length-scale and pico- to nano-second time-scale are correlated with the structural transitions through a discontinuity in the observed elastic intensities and the derived mean square displacements. Molecular dynamics simulations have been performed in parallel focussing on the length-, time- and temperature-scales of the neutron experiments. They correctly reproduce the structural features of the main gel-liquid phase transition. Particular emphasis is placed on the dynamical amplitudes derived from experiment and simulations. Two methods are used to analyse the experimental data and mean square displacements. They agree within a factor of 2 irrespective of the probed time-scale, i.e. the instrument utilized. Mean square displacements computed from simulations show a comparable level of agreement with the experimental values, albeit, the best match with the two methods varies for the two instruments. Consequently, experiments and simulations together give a consistent picture of the structural and dynamical aspects of the main lipid transition and provide a basis for future, theoretical modelling of dynamics and phase behaviour in membranes. The need for more detailed analytical models is pointed out by the remaining variation of the dynamical amplitudes derived in two different ways from experiments on the one hand and simulations on the other.

Aoun, Bachir↗

Reversible simulations of elastic collisions

Consider a system of N identical hard spherical particles moving in a d-dimensional box and undergoing elastic, possibly multi-particle, collisions. We develop a new algorithm that recovers the pre-collision state from the post-collision state of the system, across a series of consecutive collisions, \textit{with essentially no memory overhead}. The challenge in achieving reversibility for an n-particle collision (where, in general, n<< N) arises from the presence of nd-d-1 degrees of freedom (arbitrary angles) during each collision, as well as from the complex geometrical constraints placed on the colliding particles. To reverse the collisions in a traditional simulation setting, all of the particular realizations of these degrees of freedom (angles) during the forward simulation must be tracked. This requires memory proportional to the number of collisions, which grows very fast with N and d, thereby severely limiting the \textit{de facto} applicability of the scheme. This limitation is addressed here by first performing a pseudo-randomization of angles, which ensures determinism in the reverse path for any values of n and d. To address the more difficult problem of geometrical and dynamic constraints, a new approach is developed which correctly samples the constrained phase space. Upon combining the pseudo-randomization with correct phase space sampling, perfect reversibility of collisions is achieved, as illustrated for n<=3, d=2, and n=2, d=3. This result enables, for the first time, reversible simulations of elastic collisions with essentially zero memory accumulation. In principle, the approach presented here could be generalized to larger values of n, which would be of definite interest for molecular dynamics simulations at high densities.

Perumalla, Kalyan S.↗

Elastic Stacker

Stacker is a library and command-line tool for interacting with components of the Elastic Stack remotely using their APIs. For example, Stacker allows the user to persist API resources to disk and re-create them using the same APIs, potentially allowing configuration to be kept in sync across multiple Elastic Stack instances.

Taliaferro, JamesP.↗

Characterization of elastic mechanical properties of Tuscaloosa Marine Shale from well logs using the vertical transversely isotropic model

To avoid steep declines in the Tuscaloosa Marine Shale (TMS) production, wells are fracture-stimulated to release the hydrocarbons trapped in the matrix of the formation. An accurate estimation of Young’s modulus and Poisson’s ratio is essential for hydraulic fracture propagation. In addition, ignoring the highly heterogeneous and anisotropic character of TMS can lead to erroneous stress values, which subsequently affect hydraulic fracture width estimates and the overall hydraulic fracturing process. We have developed an empirical 1D geomechanical model that takes into account VTI anisotropy, and it is used to characterize the elastic mechanical properties of TMS in two wells. In the analyzed formation, the vertical Poisson’s ratio is less than the horizontal Poisson’s ratio, which suggests the necessity of an alternative to the ANNIE equations. The stiffness coefficients [Formula: see text] and [Formula: see text] were estimated using the relationships developed from the ultrasonic core data available for the two TMS. Further, correlations between the static and dynamic properties from laboratory tests were used to improve the minimum horizontal stress calculation. We compare VTI Young’s moduli, Poisson’s ratios, and minimum horizontal stress with the isotropic solution. VTI modeling improves the estimation of the elastic mechanical properties. The isotropic solution underestimates the minimum horizontal stress in the formation. Moreover, it was shown that the 20 ft shale interval below the TMS base is characterized by a low Young’s modulus (the vertical Young’s modulus is equal to 20 GPa, whereas the horizontal Young’s modulus is equal to 40 GPa) and may be a frac barrier.

Geochemistry & Geophysics↗

Elastic properties of type-I clathrate K 8 Zn 4 Sn 42 determined by inelastic X-ray scattering

We measured the phonon dispersion at ambient conditions in single-crystal type-I clathrate K8Zn4Sn42, a material with promising thermoelectric properties that has only recently been synthesized, using the high-energy resolution inelastic X-ray scattering (IXS) technique. From the sound velocities along high-symmetry directions, we extracted the elastic constants (C 11, C 12, C 44 = 63.2, 19.1, 21.9 GPa, respectively). Experimental results agree with the predictions from first-principles calculations on the hypothetical, "guest-free", type-I clathrate Sn46. The size of the crystal investigated was several orders of magnitude smaller than what is required for neutron and ultrasonic measurements. Due to this essential property, together with the high-energy resolution, high-momentum-transfer resolution, and the access to the strongest Bragg reflections, IXS is the technique of choice for measuring the full elastic constant tensor for microcrystals.

Leu, Bogdan M.↗

Identifying Supply and Demand Elasticities of Agricultural Commodities: Implications for the US Ethanol Mandate

We present a new framework to identify supply elasticities of storable commodities where past shocks are used as exogenous price shifters. In the agricultural context, past yield shocks change inventory levels and futures prices of agricultural commodities. We use our estimated elasticities to evaluate the impact of the 2009 Renewable Fuel Standard on commodity prices, quantities, and food consumers' surplus for the four basic staples: corn, rice, soybeans, and wheat. Prices increase 20 percent if one-third of commodities used to produce ethanol are recycled as feedstock, with a positively skewed 95 percent confidence interval that ranges from 14 to 35 percent.

54 ENVIRONMENTAL SCIENCES↗

3D X-ray Microprobe Investigation of Local Dislocation Densities and Elastic Strain Gradients in a NiAl-Mo Composite and Exposed Mo Micropillars as a Function of Pre-strain

3D spatially-resolved polychromatic microdiffraction was used to nondestructively probe the depth-dependent dislocation density and elastic strain gradients in separate phases of a NiAl Mo composite. Dislocation density and strain gradients are investigated before and after compressive strain. After plastic deformation important changes in the local stress state are found compared to the as grown composite. In as grown composites, due to the thermal expansion mismatch, the Mo phase is under compression and the NiAl phase is in tension. After compressive strain, the Mo phase is in tension and NiAl matrix is under compression. This result can be understood from the mismatch in yield strain of the composite material and from the elastic constraints during unloading. The dislocation density in both phases is found to grow with increased straining. These measurements provide quantitative dislocation information to guide recent directional solidified Mo micro-pillar testing. They also guide models of interface dynamics in composite materials.

36 MATERIALS SCIENCE↗

FRIEDA: Flexible Robust Intelligent Elastic Data Management Framework

Scientific applications are increasingly using cloud resources for their data analysis workflows. However, managing data effectively and efficiently over these cloud resources is challenging due to the myriad storage choices with different performance, cost trade-offs, complex application choices and complexity associated with elasticity, failure rates in these environments. The different data access patterns for data-intensive scientific applications require a more flexible and robust data management solution than the ones currently in existence. FRIEDA is a Flexible Robust Intelligent Elastic Data Management framework that employs a range of data management strategies in cloud environments. FRIEDA can manage storage and data lifecycle of applications in cloud environments. There are four different stages in the data management lifecycle of FRIEDA – (i) storage planning, (ii) provisioning and preparation, (iii) data placement, and (iv) execution. FRIEDA defines a data control plane and an execution plane. The data control plane defines the data partition and distribution strategy, whereas the execution plane manages the execution of the application using a master-worker paradigm. FRIEDA also provides different data management strategies, either to partition the data in real-time, or predetermine the data partitions prior to application execution.

97 MATHEMATICS AND COMPUTING↗