Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cross Section”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Electron-He(+) P-wave Elastic Scattering and Photoabsorption in Two-electron Systems

In a previous paper [Bhatia, Phys. Rev. A 69,032714 (2004)], electron-hydrogen P-wave scattering phase shifts were calculated using the optical potential approach based on the Feshbach projection operator formalism. This method is now extended to the singlet and triplet electron-He(+) P-wave scattering in the elastic region. Phase shifts are calculated using Hylleraas-type correlation functions with up to 220 terms. Results are rigorous lower bounds to the exact phase shifts and they are compared to phase shifts obtained from the method of polarized orbitals and close-coupling calculations. The continuum functions calculated here are used to calculate photoabsorption cross sections. Photoionization cross sections of He and photodetachment cross sections of H(-) are calculated in the elastic region, i.e. leaving He(+) and H in their respective ground states, and compared with previous calculations. Radiative attachment rates are also calculated.

Bhatia, A. K.↗
NASA NTRS2006

T-Shaped Emitter Metal Structures for HBTs

Metal emitter structures in a class of developmental InP-based high-speed heterojunction bipolar transistors (HBTs) have been redesigned to have T-shaped cross sections. T-cross-section metal features have been widely used in Schottky diodes and high-electron-mobility transistors, but not in HBTs. As explained, the purpose served by the present T cross-sectional shapes is to increase fabrication yields beyond those achievable with the prior cross-sectional shapes.

Fung, King Man↗
NASA NTRS1974

Radiation and scattering by thin-wire structures in the complex frequency domain

Piecewise-sinusoidal expansion functions and Galerkin's method are employed to formulate a solution for an arbitrary thin-wire configuration in a homogeneous conducting medium. The analysis is performed in the real or complex frequency domain. In antenna problems, the solution determines the current distribution, impedance, radiation efficiency, gain and far-field patterns. In scattering problems, the solution determines the absorption cross section, scattering cross section and the polarization scattering matrix. The electromagnetic theory is presented for thin wires and the forward-scattering theorem is developed for an arbitrary target in a homogeneous conducting medium.

Richmond, J. H.↗
NASA NTRS1974

Computer program for thin-wire structures in a homogeneous conducting medium

A computer program is presented for thin-wire antennas and scatters in a homogeneous conducting medium. The anaylsis is performed in the real or complex frequency domain. The program handles insulated and bare wires with finite conductivity and lumped loads. The output data includes the current distribution, impedance, radiation efficiency, gain, absorption cross section, scattering cross section, echo area and the polarization scattering matrix. The program uses sinusoidal bases and Galerkin's method.

Richmond, J. H.↗
NASA NTRS1983

High spectral resolution lidar to measure optical scattering properties of atmospheric aerosols. I - Theory and instrumentation

A high spectral resolution lidar technique to measure optical scattering properties of atmospheric aerosols is described. Light backscattered by the atmosphere from a narrowband optically pumped oscillator-amplifier dye laser is separated into its Doppler broadened molecular and elastically scattered aerosol components by a two-channel Fabry-Perot polyetalon interferometer. Aerosol optical properties, such as the backscatter ratio, optical depth, extinction cross section, scattering cross section, and the backscatter phase function, are derived from the two-channel measurements.

Shipley, S. T.↗
NASA NTRS1989

Observational results using the microwave temperature profiler during the Airborne Antarctic Ozone Experiment

The Microwave Temperature Profiler (MTP) measures profiles of air temperature versus altitude. The altitude coverage is about 5 km at a flight altitude of 20 km (66,000 feet), and the profiles are obtained every 14 s. The MTP instrument is installed on NASA's ER-2 aircraft, which flew 13 missions over Antarctica during the Airborne Antarctic Ozone Experiment. Altitude temperature profiles were used to derive potential temperature cross sections. These cross sections have been useful in detecting atmospheric waves. Many wave encounters have been identified as 'mountain waves'. The mountain waves are found to extend from the lowest altitudes measured to the highest (about 24 km). The southern part of the Palmer Peninsula was found to be associated with mountain waves more than half the time. Altitude temperature profiles were also used to measure the lapse rate along the flight track. Lapse rate versus latitude plots do not show significant changes at the ozone hole boundary.

Gary, Bruce L.↗
NASA NTRS1995

The Schwinger Variational Method

Variational methods have proven invaluable in theoretical physics and chemistry, both for bound state problems and for the study of collision phenomena. The application of the Schwinger variational (SV) method to e-molecule collisions and molecular photoionization has been reviewed previously. The present chapter discusses the implementation of the SV method as applied to e-molecule collisions. Since this is not a review of cross section data, cross sections are presented only to server as illustrative examples. In the SV method, the correct boundary condition is automatically incorporated through the use of Green's function. Thus SV calculations can employ basis functions with arbitrary boundary conditions. The iterative Schwinger method has been used extensively to study molecular photoionization. For e-molecule collisions, it is used at the static exchange level to study elastic scattering and coupled with the distorted wave approximation to study electronically inelastic scattering.

Huo, Winifred M.↗
NASA NTRS1997

The Systematic Interpretation of Cosmic Ray Data (The Transport Project)

The Transport project's primary goals were to: (1) Provide measurements of critical fragmentation cross sections; (2) Study the cross section systematics; (3) Improve the galactic cosmic ray propagation methodology; and (4) Use the new cross section measurements to improve the interpretation of cosmic ray data. To accomplish these goals a collaboration was formed consisting of researchers in the US at Louisiana State University (LSU), Lawrence Berkeley Laboratory (LBL), Goddard Space Flight Center (GSFC), the University of Minnesota (UM), New Mexico State University (NMSU), in France at the Centre d'Etudes de Saclay and in Italy at the Universita di Catania. The US institutions, lead by LSU, were responsible for measuring new cross sections using the LBL HISS facility, analysis of these measurements and their application to interpreting cosmic ray data. France developed a liquid hydrogen target that was used in the HISS experiment and participated in the data interpretation. Italy developed a Multifunctional Neutron Spectrometer (MUFFINS) for the HISS runs to measure the energy spectra, angular distributions and multiplicities of neutrons emitted during the high energy interactions. The Transport Project was originally proposed to NASA during Summer, 1988 and funding began January, 1989. Transport was renewed twice (1991, 1994) and finally concluded at LSU on September, 30, 1997. During the more than 8 years of effort we had two major experiment runs at LBL, obtained data on the interaction of twenty different beams with a liquid hydrogen target, completed the analysis of fifteen of these datasets obtaining 590 new cross section measurements, published nine journal articles as well as eighteen conference proceedings papers, and presented more than thirty conference talks.

Guzik, T. Gregory↗
NASA NTRS1945

Calculation of Centrally Loaded Thin-Walled Columns Above the Buckling Limit

When thin-walled columns formed from flanged sheet, such as used in airplane construction, are subjected to axial load, their behavior at failure varies according to the slenderness ratio. On long columns the axis deflects laterally while the cross section form is maintained; buckling results. The respective breaking load in the elastic range is computed by Euler's formula and for the plastic range by the Engesser- Karman formula. Its magnitude is essentially dependent upon the length. On intermediate length columns, especially where open sections are concerned, the cross section is distorted while the cross section form is preserved; twisting failure results. The buckling load in twisting is calculated according to Wagner and Kappus. On short columns the straight walls of low-bending resistance that form the column are deflected at the same time that the cross section form changes - buckling occurs without immediate failure. Then the buckling load of the total section computable from the buckling loads of the section walls is not the ultimate load; quite often, especially on thin-walled sections, it lies considerably higher and is secured by tests. Both loads, the buckling and the ultimate load are only in a small measure dependent upon length. The present report is an attempt to theoretically investigate the behavior of such short, thin-walled columns above the buckling load with the conventional calculating methods.

Reinitzhuber, F.↗
NASA NTRS1977

On the factorization and fitting of molecular scattering information

The reported analysis is based on the factored IOS T-matrix. It is shown that line shape measurements may be used over a range of temperatures to evaluate inelastic scattering cross sections. Basic factorization or parameterization relations are derived by considering the wavefunction equations. The parameterization of cross sections is considered, taking into account the differential scattering amplitude and cross section, integral cross sections, phenomenological cross sections for general relaxation processes, and viscosity and diffusion cross sections. Thermal averages and rates are discussed, giving attention to integral cross sections and rates, and general phenomenological cross sections. The results of computational studies are also presented.

Goldflam, R.↗
NASA NTRS1989

Evolution of wide binary millisecond pulsars in globular clusters

The evolution of a binary radio pulsar in a wide orbit about a low-mass degenerate dwarf companion in a globular cluster environment is investigated. An extensive series of numerical scattering experiments is used to study encounters between such a pulsar and passing cluster field stars. A wide range of initial orbital periods from 3 to 1000 days is considered with a corresponding range of masses for the degenerate dwarf companions. The calculative results are summarized in the form of scattering cross sections. In particular, cross sections are presented for three final 'channels' in which the end product of the encounter is an isolated neutron star. Cross sections for inducing various orbital eccentricities into initially circular orbits are also derived. The implications of the results for the formation of the single millisecond pulsars in M28 and M15 and for the nearly circular obit of the M4 binary radio pulsar are discussed.

Rappaport, S.↗
NASA NTRS1996

A Systematic Solution Approach for Neutron Transport Problems in Diffuse Regimes

A systematic solution approach for the neutron transport equation, based on a least-squares finite-element discretization, is presented. This approach includes the theory for the existence and uniqueness of the analytical as well as of the discrete solution, bounds for the discretization error, and guidance for the development of an efficient multigrid solver for the resulting discrete problem. To guarantee the accuracy of the discrete solution for diffusive regimes, a scaling transformation is applied to the transport operator prior to the discretization. The key result is the proof of the V-ellipticity and continuity of the scaled least-squares bilinear form with constants that are independent of the total cross section and the absorption cross section. For a variety of least-squares finite-element discretizations this leads to error bounds that remain valid in diffusive regimes. Moreover, for problems in slab geometry a full multigrid solver is presented with V(1, 1)-cycle convergence rates approximately equal to 0.1, independent of the size of the total cross section and the absorption cross section.

Manteuffel, T. A.↗
NASA NTRS1997

A SPDS Node to Support the Systematic Interpretation of Cosmic Ray Data

The purpose of this project was to establish and maintain a Space Physics Data System (SPDS) node that supports the analysis and interpretation of current and future galactic cosmic ray (GCR) measurements by (1) providing on-line databases relevant to GCR propagation studies; (2) providing other on-line services, such as anonymous FTP access, mail list service and pointers to e-mail address books, to support the cosmic ray community; (3) providing a mechanism for those in the community who might wish to submit similar contributions for public access; (4) maintaining the node to assure that the databases remain current; and (5) investigating other possibilities, such as CD-ROM, for public dissemination of the data products. Shortly after the original grant to support these activities was established at Louisiana State University a detailed study of alternate choices for the node hardware was initiated. The chosen hardware was an Apple Workgroup Server 9150/120 consisting of a 120 MHz PowerPC 601 processor, 32 MB of memory, two I GB disks and one 2 GB disk. This hardware was ordered and installed and has been operating reliably ever since. A preliminary version of the database server was available during the first year effort and was used as part of the very successful SPDS demonstration during the Rome, Italy International Cosmic Ray Conference. For this server version we were able to establish the html and anonymous FTP server software, develop a Web page structure which can be easily modified to include new items, provide an on-line database of charge changing total cross sections, include the cross section prediction software of Silberberg & Tsao as well as Webber, Kish and Schrier for download access, and provide an on-line bibliography of the cross section measurement references by the Transport Collaboration. The preliminary version of this SPDS Cosmic Ray node was examined by members of the C&H SPDS committee and returned comments were used to refine the implementation.

Source record↗