Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Collective modes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

First results with charmless two-body B-decays at LHCb, and future prospects

LHCb is an experiment which is designed to perform flavour physics measurements at the LHC. Charged two-body charmless B decays (e.g. B^0 -> Kpi, pipi, B_s->KK, etc) receive significant contributions from loop diagrams and are thus sensitive probes of New Physics. Study of these modes is therefore an important physics goal of LHCb. First results will be presented, using around 37 pb^{-1} of data collected at \sqrt{s}=7 TeV in 2010. These results illustrate the power of the LHCb trigger system and particle identification capabilities of the RICH detectors in isolating clean samples of each final state, and include preliminary measurements of direct CP-violation in certain key modes. The prospects for these measurements in the coming run will be presented. A brief survey will also be given of results and prospect in other areas of the LHCb physics programme.

B-DECAY↗

Setup for optimized grazing incidence x-ray absorption experiments on thin films on substrates

We present a state-of-the-art experimental apparatus and a proper setup to perform x-ray absorption spectroscopy (XAS) experiments in grazing incidence mode. This geometry is appropriate for doped thin films or interfaces buried at moderate depth in a thick matrix, whenever the scattering and/or fluorescence from the matrix has to be strongly attenuated. Both the calculation and the experimental data demonstrate that the specific setup that consists in a grazing incidence and grazing collection geometry is extremely advantageous. In fact, with respect to the standard geometry used to perform XAS experiments in fluorescence mode, the present setup allows an enhancement in the interesting fluorescence signal from the surface layer without a corresponding increase in the elastic scattering contribution from the matrix. The sample holder especially designed for this kind of experiment can work in vacuum and at low temperature. An easy and quick automatic sample alignment procedure is detailed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Instability of wave modes in a free-electron laser with a helical wiggler and ion-channel guiding

The dispersion relation for a free-electron laser (FEL) with a one-dimensional helical wiggler and an ion channel, in the collective regime, is found with all relativistic effects on the space-charge wave and radiation included. This dispersion relation is solved numerically to study the unstable interaction among all wave modes. In group I orbits, coupling between the positive-energy space-charge wave and the left circularly polarized electromagnetic wave is found. This instability and the coupling between the negative and positive-energy space-charge wave are found in the group II orbits in the negative mass regime. In group II orbits, there is a coupling between the right and left circularly polarized electromagnetic waves, in the positive mass regime. These instabilities are found to be distinct from the main FEL resonance. Contrary to the main FEL resonance, the additional instabilities have a nonrelativistic nature and are made of strongly coupled modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spatiotemporal synchronization of drift waves in a magnetron sputtering plasma

A feedforward scheme is applied for drift waves control in a magnetized magnetron sputtering plasma. A system of driven electrodes collecting electron current in a limited region of the explored plasma is used to interact with unstable drift waves. Drift waves actually appear as electrostatic modes characterized by discrete wavelengths of the order of few centimeters and frequencies of about 100 kHz. The effect of external quasi-periodic, both in time and space, travelling perturbations is studied. Particular emphasis is given to the role played by the phase relation between the natural and the imposed fluctuations. It is observed that it is possible by means of localized electrodes, collecting currents which are negligible with respect to those flowing in the plasma, to transfer energy to one single mode and to reduce that associated to the others. Due to the weakness of the external action, only partial control has been achieved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Final Technical Report: Supporting Wind Turbine Research and Testing - Gearbox Durability Study

The combination of premature failure of wind turbine gearboxes and the downtime caused by those failures leads to an increase in the cost of electricity produced by the wind. There is a need for guidance to asset managers regarding how to maximize the longevity of their gearboxes in order to help keep the cost of wind energy as low as possible. A low cost of energy supports the US Department of Energy's goal of achieving 20% of the electricity in the United States produced by wind by the year 2030. DNV KEMA has leveraged our unique position in the industry as an independent third party engineering organization to study the problem of gearbox health management and develop guidance to project operators. This report describes the study. The study was conducted in four tasks. In Task 1, data that may be related to gearbox health and are normally available to wind project operators were collected for analysis. Task 2 took a more in-depth look at a small number of gearboxes to gain insight in to relevant failure modes. Task 3 brought together the previous tasks by evaluating the available data in an effort to identify data that could provide early indications of impending gearbox failure. Last, the observations from the work were collected to develop recommendations regarding gearbox health management.

17 WIND ENERGY↗

Influence of dynamic inflow on the helicopter vertical response

A study was conducted to investigate the effects of dynamic inflow on rotor-blade flapping and vertical motion of the helicopter in hover. Linearized versions of two dynamic inflow models, one developed by Carpenter and Fridovich and the other by Pitt and Peters, were incorporated in simplified rotor-body models and were compared for variations in thrust coefficient and the blade Lock number. In addition, a comparison was made between the results of the linear analysis, and the transient and frequency responses measured in flight on the CH-47B variable-stability helicopter. Results indicate that the correlations are good, considering the simplified model used. The linear analysis also shows that dynamic inflow plays a key role in destabilizing the flapping mode. The destabilized flapping mode, along with the inflow mode that the dynamic inflow introduces, results in a large initial overshoot in the vertical acceleration response to an abrupt input in the collective pitch. This overshoot becomes more pronounced as either the thrust coefficient or the blade Lock number is reduced. Compared with Carpenter's inflow model, Pitt's model tends to produce more oscillatory responses because of the less stable flapping mode predicted by it.

Chen, Robert T. N.↗

Influence of dynamic inflow on the helicopter vertical response

A study has been conducted to investigate the effects of dynamic inflow on rotor-blade flapping and vertical motion of the helicopter in hover. Linearized versions of two dynamic inflow models, one developed by Carpenter and Fridovich and the other by Pitt and Peters, were incorporated in simplified rotor-body models and were compared for variations in thrust coefficient and the blade Lock number. In addition, a comparison was made between the results of the linear analysis, and the transient and frequency responses measured in flight on the CH-47B variable-stability helicopter. Results indicate that the correlations are good, considering the simplified model used. The linear analysis also shows that dynamic inflow plays a key role in destabilizing the flapping mode. The destabilized flapping mode, along with the inflow mode that the dynamic inflow introduces, results in a large initial overshoot in the vertical acceleration response to an abrupt input in the collective pitch. This overshoot becomes more pronounced as either the thrust coefficient or the blade Lock number is reduced. Compared with Carpenter's inflow model, Pitt's model tends to produce more oscillatory responses because of the less stable flapping mode predicted by it.

Chen, Robert T. N.↗

Collective structure of the N=40 isotones

The structure of even-even N=40 isotones is studied from drip line to drip line through the systematic investigation of their quadrupole modes of excitation. Calculations are performed within the Hartree-Fock-Bogoliubov approach using the Gogny D1S effective interaction. Where relevant, these calculations are extended beyond mean field within a generator-coordinate-based method. An overall good agreement with available experimental data is reported, showing that collectivity increases from the neutron to the proton drip line. Whereas {sup 60}Ca and {sup 68}Ni display a calculated spherical shape in their ground states, all other isotones show a prolate-deformed ground-state band and a quasi-{gamma} band. Coexistence features are predicted in the neutron-deficient N=40 isotones above {sup 74}Se.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Long-term variability in immersion-mode marine ice-nucleating particles from climate model simulations and observations

Abstract. Ice-nucleating particles (INPs) in the Southern Ocean (SO) atmosphere have significant impacts on cloud radiative and microphysical properties. Yet, INP prediction skill in climate models remains poorly understood, in part because of the lack of long-term measurements. Here we show, for the first time, how model-simulated INP concentrations compare with year-round INP measurements during the Macquarie Island Cloud Radiation Experiment (MICRE) campaign from 2017–2018. We simulate immersion-mode INP concentrations using the Energy Exascale Earth System Model version 1 (E3SMv1) by combining simulated aerosols with recently developed deterministic INP parameterizations and the native classical nucleation theory (CNT) for mineral dust in E3SMv1. Because MICRE did not collect aerosol measurements of super-micron particles, which are more effective ice nucleators, we evaluate the model's aerosol fields at other high-latitude sites using long-term in situ observations of dust and sea spray aerosol. We find that the model underestimates dust and overestimates sea spray aerosol concentrations by 1 to 2 orders of magnitude for most of the high-latitude sites in the Southern Hemisphere. We next compare predicted INP concentrations with concentrations of INPs collected on filter samples (typically for 2 or 3 d) and processed offline using the Colorado State University ice spectrometer (IS) in immersion freezing mode. We find that when deterministic parameterizations for both dust and sea spray INPs are used, simulated INPs are within a factor of 10 of observed INPs more than 60 % of the time during summer. Our results also indicate that the E3SM's current treatment of mineral dust immersion freezing in the SO is impacted by compensating biases – an underprediction of dust amount was compensated by an overprediction of its effectiveness as INPs. We also perform idealized droplet freezing experiments to quantify the implications of the time-dependent behavior assumed by the E3SM's CNT-parameterization and compare with the ice spectrometer observations. We find that the E3SM CNT 10 s diagnostic used in this study is a reasonable approximation of the exact formulation of CNT, when applied to ice spectrometer measurements in low-INP conditions similar to Macquarie Island. However, the linearized 10 s diagnostic underestimates the exact formula by an order of magnitude or more in places with high-INP conditions like the Sahara. Overall, our findings suggest that it is important to correct the biases in E3SM's simulated dust life cycle and update E3SM's INP parameterizations. INP prediction errors of 2 to 3 orders of magnitude can have considerable impacts on the simulated cloud and radiative properties in global climate models. On comparing INP concentrations during MICRE against ship-based campaigns, Measurements of Aerosols, Radiation, and Clouds over the Southern Ocean (MARCUS) and Antarctic Circumnavigation Expedition (ACE), we find that INPs from the latter are significantly higher only in regions closer to Macquarie Island. This alludes to the fact that physical, chemical and biological processes affecting INP concentrations as stimulated by the island could be partly responsible for the high INP concentrations observed at Macquarie Island during the MICRE campaign. Therefore, improvements to both aerosol simulation and INP parameterizations are required to adequately simulate INPs and their cloud impacts in E3SM. It will be helpful to include a parallel measurement of the size-resolved aerosol composition and explore opportunities for long-term measurement platforms in future field campaigns studying INP sources in remote marine regions.

54 ENVIRONMENTAL SCIENCES↗

Induced fission of Pu 240 within a real-time microscopic framework

Here, we describe the fissioning dynamics of 240 Pu from a configuration in the proximity of the outer fission barrier to full scission and the formation of the fragments within an implementation of density functional theory extended to superfluid systems and real-time dynamics. The fission fragments emerge with properties similar to those determined experimentally, while the fission dynamics appears to be quite complex, with many excited shape and pairing modes. The evolution is found to be much slower than previously expected, and the ultimate role of the collective inertia is found to be negligible in this fully nonadiabatic treatment of nuclear dynamics, where all collective degrees of freedom (CDOF) are included (unlike adiabatic treatments with a small number of CDOF).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Modified Adaptive Control for Region 3 Operation in the Presence of Wind Turbine Structural Modes

Many challenges exist for the operation of wind turbines in an efficient manner that is reliable and avoids component fatigue and failure. Turbines operate in highly turbulent environments resulting in aerodynamic loads that can easily excite turbine structural modes, possibly causing component fatigue and failure. Wind turbine manufacturers are highly motivated to reduce component fatigue and failure that can lead to loss of revenue due to turbine down time and maintenance costs. The trend in wind turbine design is toward larger, more flexible turbines that are ideally suited to adaptive control methods due to the complexity and expense required to create accurate models of their dynamic characteristics. In this paper, we design an adaptive collective pitch controller for a high-fidelity simulation of a utility-scale, variable-speed horizontal axis wind turbine operating in Region 3. The objective of the adaptive pitch controller is to regulate generator speed, accommodate wind gusts, and reduce the excitation of structural modes in the wind turbine. The control objective is accomplished by collectively pitching the turbine blades. The adaptive collective pitch controller for Region 3 was compared in simulations with a baseline classical Proportional Integrator (PI) collective pitch controller. The adaptive controller will demonstrate the ability to regulate generator speed in Region 3, while accommodating gusts, and reducing the excitation of certain structural modes in the wind turbine.

Frost, Susan Alane↗

Active, Programmable Elastomeric Surfaces with Tunable Adhesion for Deterministic Assembly by Transfer Printing

Active, programmable control of interfacial adhesion is an important, desired feature of many existing and envisioned systems, including medical tapes, releasable joints, and stamps for transfer printing. Here a design for an elastomeric surface that offers switchable adhesion strength through a combination of peel-rate dependent effects and actuation of sub-surface fluid chambers is presented. Microchannels and open reservoirs positioned under a thin surface membrane can be pressurized in a controlled manner to induce various levels of surface deformation via inflation. These pressurized structures demonstrate utility in controllably decreasing the strength of adhesion of flat, solid objects to the elastomeric surface, particularly in the limit of low peel-rates. Experimental and theoretical studies of these systems reveal the key mechanisms, and guide optimized geometries for broad control over adhesion, in a programmable and reversible manner. Implementing these concepts in stamps for transfer printing enables new modes for deterministic assembly of micro- and nanoscale materials onto diverse types of substrates. Furthermore, collections of silicon plates delivered onto plastic, paper and other surfaces with single or multiply addressable stamps illustrate some of the capabilities.

36 MATERIALS SCIENCE↗

Searches for 25 rare and forbidden decays of D + and ${D}_s^{+}$ mesons

A search is performed for rare and forbidden charm decays of the form ${D}_{(s)}^{+}\to {h}^{\pm }{\mathrm{\ell}}^{+}{\mathrm{\ell}}^{\left(\prime \right)\mp } $, where h ± is a pion or kaon and ℓ (')± is an electron or muon. The measurements are performed using proton-proton collision data, corresponding to an integrated luminosity of 1.6 fb –1 , collected by the LHCb experiment in 2016. No evidence is observed for the 25 decay modes that are investigated and 90 % confidence level limits on the branching fractions are set between 1.4 × 10 –8 and 6.4 × 10 –6 . In most cases, these results represent an improvement on existing limits by one to two orders of magnitude.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of the pp → W ± γγ and pp → Zγγ cross sections at $ \sqrt{\mathrm{s}} $ = 13 TeV and limits on anomalous quartic gauge couplings

The cross section for W or Z boson production in association with two photons is measured in proton-proton collisions at a centre-of-mass energy of 13 TeV. The data set corresponds to an integrated luminosity of 137 fb -1 collected by the CMS experiment at the LHC. The W → ℓν and Z → ℓℓ decay modes (where ℓ = e, μ) are used to extract the Wγγ and Zγγ cross sections in a phase space defined by electron (muon) with transverse momentum larger than 30 GeV and photon transverse momentum larger than 20 GeV. All leptons and photons are required to have absolute pseudorapidity smaller than 2.5. The measured cross sections in this phase space are σ(Wγγ) = ${13.6}_{-1.9}^{+1.9}{\left(\mathrm{stat}\right)}_{-4.0}^{+4.0}$ (syst) ± 0.08 (PDF + scale) fb and σ(Zγγ) = ${5.41}_{-0.55}^{+0.58}{\left(\mathrm{stat}\right)}_{-.070}^{+0.64}$(syst) ± 0.06 (PDF + scale) fb. Limits on anomalous quartic gauge couplings are set in the framework of an effective field theory with dimension-8 operators.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A method for the assessment of changes in environmental perception during an EIA process

Changes in environmental perception during an EIA process among the general population (the public) and employees of the Port of Koper were measured. The method of measurement addresses the statistical significance of the influence of the content, form, mode, providers of environmental information, institutional constraint and other factors. Opinions about environmental issues were collected in both groups prior to and after the provision of information in the EIA process. The difference formed the basis for an assessment of how environmental information provided during an EIA process contributes to environmental perception. The results show that difference in opinions about the impact of the Port between the two groups became smaller when comparing the first and second survey. In relation to the opinions of the employees, institutional constraint was recognised.

54 ENVIRONMENTAL SCIENCES↗

Thermal radiation in systems of many dipoles

Systems of many nanoparticles or volume-discretized bodies exhibit collective radiative properties that could be used for enhanced, guided, or tunable thermal radiation. These are commonly treated as assemblies of point dipoles with interactions described by Maxwell's equations and thermal fluctuations correlated by the fluctuation-dissipation theorem. Here, we demonstrate the equivalence of different theories for these systems and provide a complete derivation of many-dipole thermal radiation, showing that the correct use of the fluctuation-dissipation theorem depends on the definitions of fluctuating and induced dipole moments. We formulate a method to calculate the diffusive radiative thermal conductivity of arbitrary collections of nanoparticles; this allows the comparison of thermal radiation to other heat-transfer modes and across different material systems. We calculate the radiative thermal conductivity of ordered and disordered arrays of SiC and SiO 2 nanoparticles and show that thermal radiation can significantly contribute to thermal transport in these systems, because packed nanoparticles have low phonon thermal conductivity. Finally, we demonstrate that the radiative heat transfer strongly depends on the materials and geometrical arrangement of the nanoparticle array, and we verify our calculations by comparison to the exact solution for a one-dimensional particle chain.

42 ENGINEERING↗

Observation of the Ξ b − → ψ ( 2 S ) Ξ − decay and studies of the Ξ b ( 5945 ) 0 baryon in proton-proton collisions at s = 13 TeV

The first observation of the decay Ξ b − → ψ ( 2 S ) Ξ − and measurement of the branching ratio of Ξ b − → ψ ( 2 S ) Ξ − to Ξ b − → J / ψ Ξ − are presented. The J / ψ and ψ ( 2 S ) mesons are reconstructed using their dimuon decay modes. The results are based on proton-proton colliding beam data from the LHC collected by the CMS experiment at s = 13 TeV in 2016–2018, corresponding to an integrated luminosity of 140 fb − 1 . The branching fraction ratio is measured to be B ( Ξ b − → ψ ( 2 S ) Ξ − ) / B ( Ξ b − → J / ψ Ξ − ) = 0.8 4 − 0.19 + 0.21 ( stat ) ± 0.10 ( syst ) ± 0.02 ( B ) , where the last uncertainty comes from the uncertainties in the branching fractions of the charmonium states. New measurements of the Ξ b ( 5945 ) 0 baryon mass and natural width are also presented, using the Ξ b − π + final state, where the Ξ b − baryon is reconstructed through the decays J / ψ Ξ − , ψ ( 2 S ) Ξ − , J / ψ Λ K − , and J / ψ Σ 0 K − . Finally, the fraction of Ξ b − baryons produced from Ξ b ( 5945 ) 0 decays is determined. © 2024 CERN, for the CMS Collaboration 2024 CERN

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗