Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMPRESSORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Femtosecond Compression Dynamics and Timing Jitter Suppression in a THz-driven Electron Bunch Compressor

Herein we present the first demonstration of THz driven bunch compression and timing stabilization of a relativistic electron beam. Quasi-single-cycle strong field THz radiation is used in a shorted parallel-plate structure to compress a few-fC beam with 2.5 MeV kinetic energy by a factor of 2.7, producing a 39 fs rms bunch length and a reduction in timing jitter by more than a factor of 2 to 31 fs rms. This THz driven technique offers a significant improvement to beam performance for applications like ultrafast electron diffraction, providing a critical step towards unprecedented timing resolution in ultrafast sciences, and other accelerator applications using femtosecond-scale electron beams.

43 PARTICLE ACCELERATORS↗

PCA -BASED COMPRESSOR HARDWARE DESIGN GENERATOR IN CHISEL

SF-25-077 This repository includes a hardware generator written in Chisel that generates lossy compression hardware designs based on principal component analysis (PCA), along with a flexible testbench. It also includes a Python tool for evaluating the accuracy loss of integer quantization.

Kazutomo, Yoshi [Argonne National Laboratory (ANL)↗

Compact Ultraintense Femtosecond Laser via Raman Amplifier and Compressor in Plasma

The main objective of this project was to conduct experimental and theoretical research to find conditions leading to higher, than previously obtained efficiency η of transfer the pump energy into the short seed beam in plasma of Stimulated Raman Back-Scattering (SRBS). We have demonstrated very large amplification and compression in our earlier SRBS plasma. However, the efficiency η was much too low to reach very high intensity of the output beam in the focal spot. Recently, by solving a very difficult technical SRBS’ problem, namely, the creation of very reproducible and much larger diameter plasma channels than in our earlier research, we propose a new approach to obtain higher efficiency η. The crucial new result was a very reproducible, low noise amplified seed in the larger diameter of the plasma channel leading to the higher efficiency. Using this new setup and very encouraging results about increase efficiency continuing this approach in the future the efficiency is expect to reach the range of η ≈15 - 20 % required to develop practical SRBS plasma laser. Intellectual Merit: The model for the present project was created by our earlier SRBS experiments. The main objective of those experiments was to amplify and compress the seed pulses in a plasma . The experiments demonstrated an unprecedented large pulse intensity amplification of 20,000 in system of 2-passes in ~2mm long plasma, and the seed pulse compression from 550fsec down to ~50fsec. The pump and seed beams in the present project have diameters of ~0.2–0.25mm each, propagating in ~0.35 - 0.45mm diameter and ~2-2.5mm long plasma channels (optimal length for our SRBS experiment) with input pump and seed intensities of 2x1014 and 3x1013 W/cm2, respectively. Such an SRBS system design was “prescribed” by computer simulations, which predict elimination of the SRBS “ saturation” for a such relatively short plasma channel. Plasma channels has been created by combining shorter (200psec) and longer (5nsec) laser pulses using an axicon lens for shorter pulse and spherical lens for longer pulse, a unique procedure we have developed for SRBS experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterization of Methane Emissions from Gathering Compressor Stations (Final Report)

This document is the final report to the U.S. Department of Energy (DOE) for contract DE- FE0029068 awarded to Colorado State University (CSU). CSU and subcontractor AECOM partnered with nine U.S. midstream operators to characterize emissions from natural gas gathering and boosting stations ("gathering stations") – a sector of the natural gas supply chain where few measurements have been made and little data are available for component emissions. Although there is overlap in the classes of equipment on gathering stations with those on production sites or transmission stations that have been measured recently, emissions are likely to differ for functional and operational reasons.

03 NATURAL GAS↗

Natural Gas Compressors, Assembly

This unit process identifies the proportion of each type of natural gas compression utilized for the extraction of natural gas, as relevant to each of the natural gas extraction pathways considered. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=7C428989-F1B3-4E29-9A0A-F3D48178FBB0

03 NATURAL GAS↗

Compressor, Single-Stage Centrifugal, Operation

This unit process calculates the electricity required to compress a given fluid and the fugitive emissions associated with operation. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=7FED0BBB-1D38-4F16-8BD9-B53F9E5EC6E5

42 ENGINEERING↗

Compressor Station Differential Risk Assessment for Hydrogen and Natural Gas Blends

Blending hydrogen into existing natural gas pipelines is a current initiative for large-scale hydrogen deployment in the United States. Understanding changes in hazards and risk for fuel blends can help inform regulations. A differential risk assessment was conducted to understand how the safety profile of fires and unignited flammable plumes of leaking fuel would change based on blend composition. The area affected by harmful heat fluxes from jet fires was found to be larger for blends with more natural gas in them, while the distance affected by unignited flammable fuel concentrations was found to be larger for blends with more hydrogen in them. Component leak frequencies and ignition probabilities greatly impact both heat flux risk and the flammable plume risk. The collection of additional blend-specific industry data could help understand which assumptions are most valid to make when calculating risk.

08 HYDROGEN↗

Compressor is A Sensor (Final Report)

The performance of the heat pump system varies greatly depending on the refrigerant charge amount. Improving the refrigerant charge fault detection and diagnostics (FDD) method of vapor compression systems have the potential for increasing energy efficiency and reducing service cost. Previous studies to predict refrigerant charge amount are mostly empirical methods which require significant amount of experimental data for high accuracy. The primary goal of this research is to develop a charge fault detection method which requires only a few experimental data with high prediction accuracy.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗