Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMPETENCY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Techno-economic analysis of biodiesel and ethanol co-production from lipid-producing sugarcane: Biodiesel and Ethanol Co-Production from Lipid-Producing Sugarcane

Biodiesel production from vegetable oils has progressively increased over the past two decades. However, due to the low amounts of oil produced per hectare from temperate oilseed crops (e.g. soybean), the opportunities for further increasing biodiesel production are limited. Genetically modified lipid-producing sugarcane (lipid-cane) possesses great potential for producing biodiesel as an alternative feedstock because of sugarcane’s much higher productivity compared with soybean. In this study, techno-economic models were developed for biodiesel and ethanol coproduction from lipid-cane, assuming 2, 5, 10, or 20% lipid concentration in the harvested stem (dry mass basis). The models were compared with a conventional soybean biodiesel process model to assess lipid-cane’s competiveness. In the lipid-cane process model, the extracted lipids were used to produce biodiesel by transesterifi cation, and the remaining sugar was used to produce ethanol by fermentation. The results showed that the biodiesel production cost from lipid-cane decreased from $0.89/L to $0.59 /L as the lipid content increased from 2 to 20%; this cost was lower than that obtained for soybeans ($1.08/L). The ethanol production costs from lipid-cane were between $0.40/L and $0.46/L. The internal rate of return (IRR) for the soybean biodiesel process was 15.0%, and the IRR for the lipid-cane process went from 13.7 to 24.0% as the lipid content increased from 2 to 20%. Because of its high productivity, lipid-cane with 20% lipid content can produce 6700 L of biodiesel from each hectare of land, whereas soybean can only produce approximately 500 L of biodiesel from each hectare of land. This would indicate that continued efforts to achieve lipid-producing sugarcane could make large-scale replacement of fossil-fuel-derived diesel without unrealistic demands on land area.

09 BIOMASS FUELS↗

Economic comparative advantage of willow biomass in the Northeast USA

We evaluate the potential economic availability of willow ( Salix spp.) short-rotation woody crops in the Northeast USA. Based on results from a 20-year agronomic simulation, the Northeast USA could potentially provide between 2.1 and 9.7 million dry Mg year -1 , depending on farmgate price and competition with other energy crops. In a diversified biomass energy-crop scenario, willow outperforms other lignocellulosic energy crops in planted area and production at 91% of supply and 83% of planted area in a low-price scenario in the Northeast USA. In a high-price scenario, willow also outperforms competing energy crops at 47% of production and 51% of planted area. In contrast with the rest of the USA, willow comprises the greatest portion of energy crop potential in the Northeast. Furthermore, these results suggest that willow has an agronomic comparative advantage in this region as compared to herbaceous energy crops, with great potential to increase production given adequate market prices.

09 BIOMASS FUELS↗

Cost and profit impacts of modifying stover harvest operations to improve feedstock quality

Biomass quality attributes, and the potential tractability of those attributes, are key to a successful biomass feedstock supply chain, in addition to quantity and price. Modifying harvest operations is one potential approach to managing biomass feedstock quality for corn stover. For example, eliminating raking from stover harvest operations is proposed as an approach to reduce ash content. However, changes in the stover harvest configuration cause changes in per acre profits, per ton costs, and available supply at specified prices. Here we evaluate sensitivity of profit, cost, and supply to conversion from a three–pass to a two–pass stover harvesting configuration as a means to reduce ash content. For all simulated yields, harvest costs are 2–3 per ton cheaper for three–pass versus two–pass systems wherever residue retention coefficients are less than 0.5, and per ton costs for both systems increase dramatically where residue retention coefficients are greater than 0.7. Per acre net returns are greater under all simulated yields wherever residue sustainability retention coefficients are less than 0.6. Under these conditions, farmers lose between 13 and 49 per acre by harvesting with a two–pass rather than a three–pass system. Where competing with stover markets with less stringent quality specifications, meeting ash targets by harvesting with a two–pass system may require higher grower payments of the order of 9–25 per ton to make up for the per acre lost revenue. Here, when solving for the least–cost supply, agronomic simulations suggest about 2/3 of stover is harvested with a three–pass system.

09 BIOMASS FUELS↗

Simulating competition in the US bioeconomy to produce hard‐to‐electrify transportation fuels using limited biomass resources

This study presents a novel bioeconomy optimization framework, BiOpt, designed to address critical questions regarding the strategic use of limited US biomass resources for biofuel production. By integrating detailed techno-economic analyses, life cycle assessments, and resource assessment data, BiOpt optimizes resource distributions across competing technologies to maximize economic performance and/or minimize greenhouse gas emissions. Using feedstock scenarios from the 2023 Billion Ton Study, the analysis explores optimal biomass allocations across sustainable aviation fuel, diesel, and marine biofuel conversion pathways given varying production targets and policy incentives. Results demonstrate distinct feedstock preferences and pathway utilizations when prioritizing economic returns vs. emissions reductions. For instance, fats, oils, and greases were highly favored in cost-optimized scenarios, while low-carbon feedstocks such as wet waste dominated greenhouse gas-minimized strategies. The findings underscore the pivotal role of policy incentives and technological advances in shaping biofuel supply chains and provide actionable insights for scaling sustainable biofuel production to decarbonize hard-to-electrify sectors. This framework offers a robust tool for policymakers and stakeholders to evaluate biofuel strategies that balance energy output, economic viability, and environmental impact.

09 BIOMASS FUELS↗

Cell-free metabolic engineering: Biomanufacturing beyond the cell

Industrial biotechnology and microbial metabolic engineering are poised to help meet the growing demand for sustainable, low-cost commodity chemicals and natural products, yet the fraction of biochemicals amenable to commercial production remains limited. Common problems afflicting the current state-of-the-art include low volumetric productivities, build-up of toxic intermediates or products, and byproduct losses via competing pathways. To overcome these limitations, cell-free metabolic engineering (CFME) is expanding the scope of the traditional bioengineering model by using in vitro ensembles of catalytic proteins prepared from purified enzymes or crude lysates of cells for the production of target products. In recent years, the unprecedented level of control and freedom of design, relative to in vivo systems, has inspired the development of engineering foundations for cell-free systems. These efforts have led to activation of long enzymatic pathways (>8 enzymes), near theoretical conversion yields, productivities greater than 100 mg L-1 h(-1), reaction scales of >100 L, and new directions in protein purification, spatial organization, and enzyme stability. In the coming years, CFME will offer exciting opportunities to: (i) debug and optimize biosynthetic pathways; (ii) carry out design-build-test iterations without re-engineering organisms; and (iii) perform molecular transformations when bioconversion yields, productivities, or cellular toxicity limit commercial feasibility.

Dudley, QM↗

New era of molecular structure and dynamics from solution scattering experiments

Six contributions in this special issue of Biopolymers are devoted to the application of small angle scattering (SAS) to biological macromolecules. Biological applications of SAS have undergone a resurgence in the last 15 years. Although SAS cannot compete with the atomic level information provided by crystallographic and NMR-based methods, nonetheless SAS has advantages that make it an extremely useful component in the structural biologist's tool box. An obvious reason for the renewed popularity of scattering experiments is the increased access to SAS beamlines at synchrotron X-ray sources. These high intensity sources greatly reduce the sample requirements and accelerate data acquisition. However, improved access only partially explains the resurgence of SAS. As highlighted in the six papers in this special issue, creative applications of SAS are opening up new avenues for studying biological macromolecules which are not readily investigated using other structural methods. SAS excels at characterizing the global dimensions and shape of individual molecules, molecular complexes and even disordered states, particularly as a function of solvent condition and time, and can do so in a high throughput manner. In addition, SAS can provide information about the dynamics of molecular complexes in solution. These capabilities are highlighted in this special issue which illustrates how SAS is both a versatile technique in its own right and, when combined with other methods, capable of producing a more complete description of the conformational changes and dynamics of complicated biological processes.

36 MATERIALS SCIENCE↗

Bioprocessing analysis of Pyrococcus furiosus strains engineered for CO 2 -based 3-hydroxypropionate production

In this paper, metabolically engineered strains of the hyperthermophile Pyrococcus furiosus (T opt 95–100°C), designed to produce 3-hydroxypropionate (3HP) from maltose and CO 2 using enzymes from the Metallosphaera sedula (T opt 73°C) carbon fixation cycle, were examined with respect to the impact of heterologous gene expression on metabolic activity, fitness at optimal and sub-optimal temperatures, gas-liquid mass transfer in gas-intensive bioreactors, and potential bottlenecks arising from product formation. Transcriptomic comparisons of wild-type P. furiosus , a genetically-tractable, naturally-competent mutant (COM1), and COM1-based strains engineered for 3HP production revealed numerous differences after being shifted from 95°C to 72°C, where product formation catalyzed by the heterologously-produced M. sedula enzymes occurred. At 72°C, significantly higher levels of metabolic activity and a stress response were evident in 3HP-forming strains compared to the non-producing parent strain (COM1). Gas–liquid mass transfer limitations were apparent, given that 3HP titers and volumetric productivity in stirred bioreactors could be increased over 10-fold by increased agitation and higher CO 2 sparging rates, from 18 mg/L to 276 mg/L and from 0.7 mg/L/h to 11 mg/L/h, respectively. 3HP formation triggered transcription of genes for protein stabilization and turnover, RNA degradation, and reactive oxygen species detoxification. Lastly, the results here support the prospects of using thermally diverse sources of pathways and enzymes in metabolically engineered strains designed for product formation at sub-optimal growth temperatures.

3-hydroxypropionate↗

Cloning and characterization of a panel of mitochondrial targeting sequences for compartmentalization engineering in Saccharomyces cerevisiae

Mitochondrion is generally considered as the most promising subcellular organelle for compartmentalization engineering. Much progress has been made in reconstituting whole metabolic pathways in the mitochondria of yeast to harness the precursor pools (i.e., pyruvate and acetyl-CoA), bypass competing pathways, and minimize transportation limitations. However, only a few mitochondrial targeting sequences (MTSs) have been characterized (i.e., MTS of COX4), limiting the application of compartmentalization engineering for multigene biosynthetic pathways in the mitochondria of yeast. In the present study, based on the mitochondrial proteome, a total of 20 MTSs were cloned and the efficiency of these MTSs in targeting heterologous proteins, including the Escherichia coli FabI and enhanced green fluorescence protein (EGFP) into the mitochondria was evaluated by growth complementation and confocal microscopy. After systematic characterization, six of the well!performed MTSs were chosen for the colocalization of complete biosynthetic pathways into the mitochondria. As proof of concept, the full alpha-santalene biosynthetic pathway consisting of 10 expression cassettes capable of converting acety coA to alpha-santalene was compartmentalized into the mitochondria, leading to a 3.7 fold improvement in the production of alpha-santalene. Furthermore, the newly characterized MTSs should contribute to the expanded metabolic engineering and synthetic biology toolbox for yeast mitochondrial compartmentalization engineering.

59 BASIC BIOLOGICAL SCIENCES↗

Metabolic engineering of oleaginous yeast Rhodotorula toruloides for overproduction of triacetic acid lactone

Abstract The plant‐sourced polyketide triacetic acid lactone (TAL) has been recognized as a promising platform chemical for the biorefinery industry. However, its practical application was rather limited due to low natural abundance and inefficient cell factories for biosynthesis. Here, we report the metabolic engineering of oleaginous yeast Rhodotorula toruloides for TAL overproduction. We first introduced a 2‐pyrone synthase gene from Gerbera hybrida ( GhPS ) into R. toruloides and investigated the effects of different carbon sources on TAL production. We then systematically employed a variety of metabolic engineering strategies to increase the flux of acetyl‐CoA by enhancing its biosynthetic pathways and disrupting its competing pathways. We found that overexpression of ATP‐citrate lyase (ACL1) improved TAL production by 45% compared to the GhPS overexpressing strain, and additional overexpression of acetyl‐CoA carboxylase (ACC1) further increased TAL production by 29%. Finally, we characterized the resulting strain I12‐ ACL1‐ACC1 using fed‐batch bioreactor fermentation in glucose or oilcane juice medium with acetate supplementation and achieved a titer of 28 or 23 g/L TAL, respectively. This study demonstrates that R. toruloides is a promising host for the production of TAL and other acetyl‐CoA‐derived polyketides from low‐cost carbon sources.

2‐pyrone synthase↗

An idea to explore: How an interdisciplinary undergraduate course exploring a global health challenge in molecular detail enabled science communication and collaboration in diverse audiences

Abstract Communication and collaboration are key science competencies that support sharing of scientific knowledge with experts and non‐experts alike. On the one hand, they facilitate interdisciplinary conversations between students, educators, and researchers, while on the other they improve public awareness, enable informed choices, and impact policy decisions. Herein, we describe an interdisciplinary undergraduate course focused on using data from various bioinformatics data resources to explore the molecular underpinnings of diabetes mellitus (Types 1 and 2) and introducing students to science communication. Building on course materials and original student‐generated artifacts, a series of collaborative activities engaged students, educators, researchers, healthcare professionals and community members in exploring, learning about, and discussing the molecular bases of diabetes. These collaborations generated novel educational materials and approaches to learning and presenting complex ideas about major global health challenges in formats accessible to diverse audiences.

59 BASIC BIOLOGICAL SCIENCES↗

Integrative teaching of metabolic modeling and flux analysis with interactive python modules

Abstract The modeling of rates of biochemical reactions—fluxes—in metabolic networks is widely used for both basic biological research and biotechnological applications. A number of different modeling methods have been developed to estimate and predict fluxes, including kinetic and constraint‐based (Metabolic Flux Analysis and flux balance analysis) approaches. Although different resources exist for teaching these methods individually, to‐date no resources have been developed to teach these approaches in an integrative way that equips learners with an understanding of each modeling paradigm, how they relate to one another, and the information that can be gleaned from each. We have developed a series of modeling simulations in Python to teach kinetic modeling, metabolic control analysis, 13C‐metabolic flux analysis, and flux balance analysis. These simulations are presented in a series of interactive notebooks with guided lesson plans and associated lecture notes. Learners assimilate key principles using models of simple metabolic networks by running simulations, generating and using data, and making and validating predictions about the effects of modifying model parameters. We used these simulations as the hands‐on computer laboratory component of a four‐day metabolic modeling workshop and participant survey results showed improvements in learners' self‐assessed competence and confidence in understanding and applying metabolic modeling techniques after having attended the workshop. The resources provided can be incorporated in their entirety or individually into courses and workshops on bioengineering and metabolic modeling at the undergraduate, graduate, or postgraduate level.

Kaste, Joshua A. M.↗

Single-step Conversion of Methyl Ethyl Ketone to Olefins over Zn x Zr y O z Catalysts in Water

In this study we investigated the conversion of aqueous methyl-ethyl-ketone (MEK) to olefin fuel precursors over Zn x Zr y O z mixed oxide catalysts. Experiments were carried out in water as MEK is intended to be produced from the dehydration of 2,3-butanediol in fermentation broth which is highly diluted in water. We demonstrated that Zn x Zr y O z catalysts are highly effective for converting aqueous MEK to C 4 -C 5 olefins. High selectivity to olefins equal to 85% was reached at 92% per pass conversion when under H 2 atmosphere. Catalyst stability was demonstrated for 60 hours' time on stream, highlighting the potential for upgrading 2,3-butanediol contained in fermentation broth without the need for energy-intensive water separation. Increased concentration of MEK in the aqueous feed results in increased activity towards olefin production. However, water inhibits catalyst deactivation from coking. A mechanistic investigation revealed the impact of the reaction environment (inert or reducing atmosphere) on the reaction pathways. In an inert environment, the mechanism involves consecutive aldol condensation of MEK and 3-pentanone intermediate. Under reducing conditions two reaction pathways compete with each other as MEK hydrogenation to butenes occurs concurrently with the aldol condensation/decomposition.

09 BIOMASS FUELS↗

Origin of the High CO Oxidation Activity on CeO 2 Supported Pt Nanoparticles: Weaker Binding of CO or Facile Oxygen Transfer from the Support?

Pt clusters supported on CeO 2 are highly active for low temperature CO oxidation. The enhanced reactivity could be caused by weakening of the CO binding on Pt, allowing adsorbed oxygen to more effectively compete for sites. An alternative explanation is that interfacial sites allow adsorbed CO on Pt to react with lattice oxygen in the ceria. Here we explore the origins of enhanced CO oxidation reactivity on Pt/CeO 2 using in-situ/operando infrared and x-ray spectroscopies, microcalorimetry, and reaction kinetics. Iin this work we show that CO adsorbs strongly (~110–120 kJ/mol) on Pt clusters (~1.5 nm) and Pt is almost fully covered by CO during reaction, indicating that the high activity can be related to reactive interfacial O* species. Using in-situ infrared spectroscopy we show that when the reaction mixture of CO and O 2 stops flowing over the catalyst, the adsorbed CO on Pt is lost since it reacts with interfacial O*, but if this O* is depleted, the CO band does not disappear. The role of CeO 2 is not to alter the binding of CO, but rather to enhance the reactivity of the interfacial metal-support lattice oxygens. The reaction mechanism involving the interfacial Pt–CeO 2 sites (two-site mechanism) is further confirmed by kinetic measurements which show near zero order dependence on CO and O 2 partial pressures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rhodium Single–Atom Catalysts on Titania for Reverse Water Gas Shift Reaction Explored by First Principles Mechanistic Analysis and Compared to Nanoclusters

The thermocatalytic reduction of CO2 by H2 often proceeds via two competing reaction mechanisms—the reverse water gas shift reaction (rWGSR, CO2 + H2 ⇌ CO + H2O) and methanation (CO2 + 4H2 ⇌ CH4 + 2H2O). Atomically dispersed Rh1 catalysts on TiO2 show high selectivity toward the rWGSR compared with larger Rh nanoclusters, but the origin of this size-dependent selectivity has not been fully explained. Here we report density functional theory (DFT) calculations and microkinetic simulations that clarify the Rh1 active sites and rWGSR pathway on anatase TiO2(101), as well as the high rWGSR selectivity of Rh1 compared with supported Rhx (x = 2–8 atoms) nanoclusters. DFT-computed formation energies, vibrational frequency analysis, and microkinetic modeling suggest three plausible active sites: Rh1 on titania (Rh1/TiO2(101)), Rh1 with a nearby hydroxyl group (Rh1OH/TiO2(101)), and Rh1 near an oxygen vacancy at a three-fold coordinated site (Rh1 near O3cvac). Predicted turnover frequencies and apparent activation barriers for Rh1 indicate a faster reaction involving CO2 dissociation assisted by a support oxygen vacancy via Rh1 near O3cvac, as well as slower reactions involving Rh1OH/TiO2(101) or Rh1/TiO2(101) through a COOH intermediate. Furthermore, these Rh1 sites are selective toward CO rather than CH4 because of the weak adsorption of CO, large barrier for C-O bond dissociation, and the lack of nearby metal sites for H2 dissociation, in contrast to Rhx nanoclusters, including Rh2 dimers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring the influence of interfacial solvation on electrochemical CO 2 reduction using plasmon‐enhanced vibrational sum frequency generation spectroscopy

Although interfacial solvation plays an important role in determining carbon dioxide reduction (CO 2 R) kinetics, present understanding of the potential dependent properties of the electrochemical double layer under conditions relevant for CO 2 R remains limited. This article summarizes the development and recent applications of plasmon-enhanced vibrational sum frequency generation (VSFG) spectroscopy to study the effects of cation hydration and interfacial solvation on CO 2 R using CO as a vibrational Stark reporter. Results show that electrolyte cations retain their entire solvation shell upon adsorption to inactive sites, while active sites retain only a single water layer between the gold surface and the cation. Measurements also show that the total interfacial electric field can be separated into two contributions: one from the electrochemical double layer (Stern field) and another from the polar solvation environment (Onsager field). Surprisingly, correlating VSFG spectra with reaction kinetics reveals that it is the solvation-mediated Onsager field that governs the chemical reactivity at the electrode/electrolyte interface. Measuring the interfacial water spectra during electrocatalysis also provides evidence for the proton source during H2 evolution, which competes with CO 2 R in aqueous electrolyte. These findings highlight the importance of directly probing cation hydration and interfacial solvation, which mediates reaction kinetics at electrochemical interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ternary PtRuPd/C catalyst for high-performance, low-temperature direct dimethyl ether fuel cells

Here, dimethyl ether (DME) is a promising alternative fuel option for direct-feed low-temperature fuel cells. Until recently, DME had not received the same attention as alcohol fuels, such as methanol or ethanol, despite its notable advantages. These advantages include a high theoretical open-cell voltage (1.18 V at 25 °C) that is similar to that of methanol (1.21 V), much lower toxicity than methanol, and no need for the carbon–carbon bond scission that is needed in ethanol oxidation. DME is biodegradable, has a higher energy content than methanol (8.2 vs. 6.1 kWh kg –1 ), and, like methanol, can be synthesized from recycled carbon dioxide. Although the performance of direct DME fuel cells (DDMEFCs) has progressed over the past few years, DDMEFCs have not been viewed as fully viable. In this work, we report much improved performance from the ternary Pt 55 Ru 35 Pd 10 /C anode catalyst, allowing DDMEFCs to compete directly with direct methanol fuel cells (DMFCs). We also report results involving binary Pt alloys as reference catalysts and an in situ infrared electrochemical study to better understand the mechanism of DME electro-oxidation on ternary PtRuPd/C catalysts.

30 DIRECT ENERGY CONVERSION↗