Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AROMATICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Isotopic and molecular analyses of hydrocarbons and monocarboxylic acids of the Murchison meteorite

The monocarboxylic acids and hydrocarbons of the Murchison meteorite (CM2) were isolated for isotropic analysis. The nonvolatile hydrocarbons were analyzed as crude methanol and benzene-methanol extracts and also after separation by silica gel chromatography into predominantly aliphatic, aromatic, and polar hydrocarbon fractions. The volatile hydrocarbons were obtained after progressive decomposition of the meteorite matrix by freeze-thaw, hot water, and acid treatment. Molecular analyses of the aromatic hydrocarbons showed them to comprise a complex suite of compounds in which pyrene, fluoranthene, phenanthrene, and acenaphthene were the most abundant components, a result similar to earlier analyses. The polar hydrocarbons also comprise a very complex mixture in which aromatic ketones, nitrogen, and sulfur heterocycles were identified. The monocarboxylic acids, aliphatic, aromatic, and polar hydrocarbons, and the indigenous volatile hydrocarbons were found to be D-rich. The deuterium enrichment observed in these compounds is suggestive. In two separate analyses, the delta-D values of the nonvolatile hydrocarbons were observed to increase in the following order: aliphatic-aromatic-polar. This finding is consistent with an early solar system or parent body conversion of aromatic to aliphatic compounds as well as the suggestion of pyrolytic formation of aromatic from aliphatic compounds.

Krishnamurthy, R. V.↗
NASA NTRS2003

Research to Significantly Enhance Composites Survivability at 550 F in Oxidative Environments

Methylene dianiline (MDA) and its derivatives have been used in the synthesis of polyimides to yield polymers with characteristic low-density, high tensile strength, improved solubility in organic solvents, low-melt viscosities and high thermal stability (greater than 550 F) in air. Polyimides with such properties are desirable for use in aerospace systems, e.g., jet engines, airframe, missiles, and rockets where weight is critical. Recent research at Prairie View A&M University is focused on developing monomers to generate polyimides with enhanced performance over that of NASA s PMR-15. The objective of this work is to synthesize three ring aromatic diamines which are non-toxic and when reacted with the appropriate dianhydrides will yield polyimides with lower viscosity, improve processability, good retention of mechanical properties, and oxidative stability at high environmental temperatures. Modifications of the three ring aromatic diamines include replacing the methylene linkages with aromatic ethers by nucleophilic aromatic substitution reactions and incorporating mono- and di-substituents to the center aromatic ring. An update of current reactions involved in synthesis efforts to generate three ring aromatic monomers for polyimides with methylene, carbonyl, and ether linkages separating the aromatic moieties will be displayed.

Meador, Michael A.↗
NASA NTRS2012

Hydrocarbons on Saturns Satellites: Relationship to Interstellar Dust and the Solar Nebula

To understand the origin and evolution of our Solar System, and the basic components that led to life on Earth, we study interstellar and planetary spectroscopic signatures. The possible relationship of organic material detected in carbonaceous meteorites, interplanetary dust particles (IDPs), comets and the interstellar medium have been the source of speculation over the years as the composition and processes that governed the early solar nebula have been explored to understand the extent to which primitive material survived or became processed. The Cassini VIMS has provided new data relevant to this problem. Three of Saturn's satellites, Phoebe, Iapetus, and Hyperion, are found to have aromatic and aliphatic hydrocarbons on their surfaces. The aromatic hydrocarbon signature (C-H stretching mode at 3.28 micrometers) is proportionally significantly stronger (relative to the aliphatic bands) than that seen in other Solar System bodies (e.g., comets) and materials (Stardust samples, IDPs, meteorites) and the distinctive sub-features of the 3.4 micrometer aliphatic band (CH2 and CH3 groups) are reminiscent of those widely detected throughout the diffuse ISM. Phoebe may be a captured object that originated in the region beyond the present orbit of Neptune, where the solar nebula contained a large fraction of original interstellar ice and dust that was less processed than material closer to the Sun. Debris from Phoebe now resident on Iapetus and Hyperion, as well as o Phoebe itself, thus presents a unique blend of hydrocarbons, amenable to comparisons with interstellar hydrocarbons and other Solar System materials. The dust ring surrounding Saturn, in which Phoebe is embedded, probably originated from a collision with Phoebe. Dust ring particles are the likely source of the organic-bearing materials, and perhaps the recently identified small particles of Fe detected on Saturn's satellites. Lab measurements of the absolute band strengths of representative aliphatic and aromatic molecules, together with measurements from the VIMS data, allow us to calculate the number of C atoms to find the relative abundances of C atoms in the two kinds of organic molecules. The strength of the prominent aromatic C-H stretch band relative to the aliphatic band complex in Phoebe and Iapetus indicates that the relative abundance of aromatic to aliphatic carbon is very large (greater than 200). In contract, the aromatic band is nearly imperceptible in spectra of interplanetary dust particles (IDP), returned samples from comet 91P/Wild 2, insoluable carbonaceous material in most meteorites, and the diffuse interstellar dust (DISM) (although aromatics are known in all these materials-here we consider only the spectroscopic signature)

Cruikshank, D. P.↗
DOE OSTI2026

Catabolism of lignin-related methoxylated compounds in white-rot fungi utilizes non-canonical oxidoreductases

White-rot fungi (WRF) are the most effective lignin-degrading organisms in nature, making them essential to Earth’s carbon cycle. Lignin is a highly methoxylated, heterogeneous biopolymer derived from plants. However, the pathways WRF use to metabolize methoxylated aromatic monomericcompounds as carbon sources remain unidentified. Here, we employ a systems biology approach to elucidate the intracellular catabolism of vanillate – a monomethoxylated aromatic compound – in two white-rot fungi (WRF), Gelatoporia subvermispora and Trametes versicolor. We identified and biochemically validated a four-enzyme pathway that converts vanillate into ß-ketoadipate – a metabolite that enters central carbon metabolism. This pathway deviates from typical bacterial pathways, where vanillate is initially demethylated and ring-cleaved by intradiol dioxygenases; instead, oxidative decarboxylation occurs prior to ring cleavage by extradiol dioxygenases. Thus, we conducted an in-depth investigation of ring cleavage and further downstream catabolism by the identified fungal enzymes using biochemical and structural approaches. This revealed non-canonical enzymes, including a highly substrate-specific extradiol dioxygenase and a metal-free, promiscuous reductase, the latter capable of acting on catabolic intermediates derived from both methoxylated and non-methoxylated aromatic compounds. This work emphasizes the potential of WRF and their enzymes to advance lignin valorization and enhance our understanding of their role during wood decay.

dioxygenase↗
DOE OSTI2023

Gas-Phase Synthesis of Coronene through Stepwise Directed Ring Annulation

Molecular beam experiments together with electronic structure calculations provide the first evidence of a complex network of elementary gas-phase reactions culminating in the bottom-up preparation of the 24π aromatic coronene (C 24 H 12 ) molecule–a representative peri-fused polycyclic aromatic hydrocarbon (PAH) central to the complex chemistry of combustion systems and circumstellar envelopes of carbon stars. The gas-phase synthesis of coronene proceeds via aryl radical-mediated ring annulations through benzo[e]pyrene (C 20 H 12 ) and benzo[ghi]perylene (C 22 H 12 ) involving armchair-, zigzag-, and arm-zig-edged aromatic intermediates, highlighting the chemical diversity of molecular mass growth processes to polycyclic aromatic hydrocarbons. Furthermore, the isomer-selective identification of five- to six-ringed aromatics culminating with the detection of coronene is accomplished through photoionization and is based upon photoionization efficiency curves along with photoion mass-selected threshold photoelectron spectra, providing a versatile concept of molecular mass growth processes via aromatic and resonantly stabilized free radical intermediates to two-dimensional carbonaceous nanostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Enabling microbial syringol conversion through structure-guided protein engineering

Microbial conversion of aromatic compounds is an emerging and promising strategy for valorization of the plant biopolymer lignin. A critical and often rate-limiting reaction in aromatic catabolism is O -aryl-demethylation of the abundant aromatic methoxy groups in lignin to form diols, which enables subsequent oxidative aromatic ring-opening. Recently, a cytochrome P450 system, GcoAB, was discovered to demethylate guaiacol (2-methoxyphenol), which can be produced from coniferyl alcohol-derived lignin, to form catechol. However, native GcoAB has minimal ability to demethylate syringol (2,6-dimethoxyphenol), the analogous compound that can be produced from sinapyl alcohol-derived lignin. Despite the abundance of sinapyl alcohol-based lignin in plants, no pathway for syringol catabolism has been reported to date. Here we used structure-guided protein engineering to enable microbial syringol utilization with GcoAB. Specifically, a phenylalanine residue (GcoA-F169) interferes with the binding of syringol in the active site, and on mutation to smaller amino acids, efficient syringol O -demethylation is achieved. Crystallography indicates that syringol adopts a productive binding pose in the variant, which molecular dynamics simulations trace to the elimination of steric clash between the highly flexible side chain of GcoA-F169 and the additional methoxy group of syringol. Finally, we demonstrate in vivo syringol turnover in Pseudomonas putida KT2440 with the GcoA-F169A variant. Taken together, our findings highlight the significant potential and plasticity of cytochrome P450 aromatic O -demethylases in the biological conversion of lignin-derived aromatic compounds.

09 BIOMASS FUELS↗
DOE OSTI2022

Corynebacterium glutamicum as an Efficient Omnivorous Microbial Host for the Bioconversion of Lignocellulosic Biomass

Corynebacterium glutamicum has been successfully employed for the industrial production of amino acids and other bioproducts, partially due to its native ability to utilize a wide range of carbon substrates. We demonstrated C. glutamicum as an efficient microbial host for utilizing diverse carbon substrates present in biomass hydrolysates, such as glucose, arabinose, and xylose, in addition to its natural ability to assimilate lignin-derived aromatics. As a case study to demonstrate its bioproduction capabilities, L-lactate was chosen as the primary fermentation end product along with acetate and succinate. C. glutamicum was found to grow well in different aromatics (benzoic acid, cinnamic acid, vanillic acid, and p-coumaric acid) up to a concentration of 40 mM. Besides, 13 C-fingerprinting confirmed that carbon from aromatics enter the primary metabolism via TCA cycle confirming the presence of β-ketoadipate pathway in C. glutamicum . 13 C-fingerprinting in the presence of both glucose and aromatics also revealed coumarate to be the most preferred aromatic by C. glutamicum contributing 74 and 59% of its carbon for the synthesis of glutamate and aspartate respectively. 13 C-fingerprinting also confirmed the activity of ortho-cleavage pathway, anaplerotic pathway, and cataplerotic pathways. Finally, the engineered C. glutamicum strain grew well in biomass hydrolysate containing pentose and hexose sugars and produced L-lactate at a concentration of 47.9 g/L and a yield of 0.639 g/g from sugars with simultaneous utilization of aromatics. Succinate and acetate co-products were produced at concentrations of 8.9 g/L and 3.2 g/L, respectively. Our findings open the door to valorize all the major carbon components of biomass hydrolysate by using C. glutamicum as a microbial host for biomanufacturing.

13C-fingerprinting↗
DOE OSTI2017

On the Origin of the 3.3 μ m Unidentified Infrared Emission Feature

The 3.3 μ m unidentified infrared emission feature is commonly attributed to the C–H stretching band of aromatic molecules. Astronomical observations have shown that this feature is composed of two separate bands at 3.28 and 3.30 μ m, and the origin of these two bands is unclear. In this paper, we perform vibrational analyses based on quantum mechanical calculations of 153 organic molecules, including both pure aromatic molecules and molecules with mixed aromatic/olefinic/aliphatic hydridizations. We find that many of the C–H stretching vibrational modes in polycyclic aromatic hydrocarbon (PAH) molecules are coupled. Even considering the uncoupled modes only, the correlation between the band intensity ratios and the structure of the PAH molecule is not observed, and the 3.28 and 3.30 μ m features cannot be directly interpreted in the PAH model. Based on these results, the possible aromatic, olefinic, and aliphatic origins of the 3.3 μ m feature are discussed. We suggest that the 3.28 μ m feature is assigned to aromatic C–H stretch whereas the 3.30 μ m feature is olefinic. From the ratio of these two features, the relative olefinic to aromatic content of the carrier can be determined.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2018

Electrocatalytic Hydrogenation of Oxygenated Compounds in Aqueous Phase

Electrocatalytic hydrogenation is a fascinating strategy to hydrogenate biogenic compounds at ambient conditions by replacing the thermal and H2 inputs by cathodic potential. This work compares the performance of this approach (in aqueous phase at room temperature) for a variety of model oxygenated compounds reacted over a series of metals. The target functionalities were carbonyl groups, aromatic rings, and ether bonds. All metals explored (Pt, Rh, Pd, Cu) are active for the reduction of carbonyl compounds to alcohols. For instance, conversion rates of benzaldehyde increased as a function of metal as: Pt < Rh < Pd (Cu was tested at different conditions). In contrast, only Rh and Pt were found active for hydrogenation of aromatic rings (Rh was more active than Pt). Comparing among the target functionalities, carbonyl groups are more reactive than aromatic rings and ether bonds in phenolic compounds and di-aryl ethers on all explore metals. This carbonyl reactivity, however, is enabled by the aromaticity of the molecule. Hence, the reactivity trend of the examined molecules is: butyraldehyde < furfural < acetophenone < benzaldehyde. For phenolic compounds, phenol is more reactive than cresol and methoxy phenol. Thus, the presence of substituting groups at the functionality being converted (either carbonyl or aromatic ring) decreases conversion rates. Ether bonds are cleaved under electrocatalytic conditions, which opens two main pathways for the conversion of aryl ethers: hydrogenation of the aromatic ring and hydrogenolysis of the ether bonds, whereas hydrolysis occurs as a minor pathway. Electrocatalytic hydrogenation competes with the H2 evolution reaction at the conditions of the tests, therefore Faradaic efficiency (fraction of current utilized in hydrogenation) and hydrogenation rates are correlated. That is, within the potential range explored, increasing hydrogenation rates lead to higher Faradaic efficiencies. The slope of this correlation, however, depends on the potential and on the functionality being hydrogenated. Keywords: Hydrogenation, electrocatalysis, metal catalysis, aqueous phase hydrogenation, biomass conversion. Acknowledgements The authors would like to thank Yang Song, Prof. Johannes Lercher, and the group of Prof. Hubert A. Gasteiger at the Technische Universität München for advice and support. The authors are grateful to Donald M. Camaioni, Nirala Singh, and Juan Herranz for fruitful discussions. The research described in this paper is part of the Chemical Transformation Initiative at Pacific Northwest National Laboratory (PNNL), conducted under the Laboratory Directed Research and Development Program at PNNL, a multi-program national laboratory operated by Battelle for the U.S. Department of Energy.

Hydrogenation, electrocatalysis, metal catalysis, ↗
DOE OSTI2018

Role of Biopolymers in the Deactivation of ZSM-5 during Catalytic Fast Pyrolysis of Biomass

Rapid coking and catalyst deactivation are significant problems during catalytic fast pyrolysis of biomass. Cellulose and lignin were found to coke via different mechanisms, resulting in two distinct types of catalyst deactivation. Lignin pyrolysis vapors cause coke formation mainly by external surface coking without limiting access to the active acid sites in the microchannels. Lignin deactivates the surface cracking capability of ZSM-5, resulting in unreacted primary vapors passing through while maintaining aromatization reactions. Cellulose pyrolysis vapors generate coke mainly as an extension of the aromatization reactions on the acid sites, which leads to occlusion of the internal acid sites. This deactivates the upgrading reactions, resulting in decreased aromatics formation, generating oxygenated intermediates and increased alkylation of one-ring aromatics and reduced multi-ring aromatics selectivity. Furthermore, the results indicate that the decrease in aromatics formation observed during catalytic pyrolysis of biomass is primarily caused by the coke generated from the polysaccharide components.

09 BIOMASS FUELS↗
DOE OSTI2024

Catalytic carbon–carbon bond cleavage in lignin via manganese–zirconium-mediated autoxidation

Abstract Efforts to produce aromatic monomers through catalytic lignin depolymerization have historically focused on aryl–ether bond cleavage. A large fraction of aromatic monomers in lignin, however, are linked by various carbon–carbon (C–C) bonds that are more challenging to cleave and limit the yields of aromatic monomers from lignin depolymerization. Here, we report a catalytic autoxidation method to cleave C–C bonds in lignin-derived dimers and oligomers from pine and poplar. The method uses manganese and zirconium salts as catalysts in acetic acid and produces aromatic carboxylic acids as primary products. The mixtures of the oxygenated monomers are efficiently converted to cis,cis -muconic acid in an engineered strain of Pseudomonas putida KT2440 that conducts aromatic O -demethylation reactions at the 4-position. This work demonstrates that autoxidation of lignin with Mn and Zr offers a catalytic strategy to increase the yield of valuable aromatic monomers from lignin.

09 BIOMASS FUELS↗
DOE OSTI2016

Lignin depolymerization by fungal secretomes and a microbial sink

In Nature, powerful oxidative enzymes secreted by white rot fungi and some bacteria catalyze lignin depolymerization and some microbes are able to catabolize the resulting aromatic compounds as carbon and energy sources. Taken together, these two processes offer a potential route for microbial valorization of lignin. However, many challenges remain in realizing this concept, including that oxidative enzymes responsible for lignin depolymerization also catalyze polymerization of low molecular weight (LMW) lignin. Here, multiple basidiomycete secretomes were screened for ligninolytic enzyme activities in the presence of a residual lignin solid stream from a corn stover biorefinery, dubbed DMR-EH (Deacetylation, Mechanical Refining, and Enzymatic Hydrolysis) lignin. Two selected fungal secretomes, with high levels of laccases and peroxidases, were utilized for DMR-EH lignin depolymerization assays. The secretome from Pleurotus eryngii, which exhibited the highest laccase activity, reduced the lignin average molecular weight by 63% and 75% at pH 7 compared to the Mw of the control treated at the same conditions and the initial DMR-EH lignin, respectively, and was applied in further depolymerization assays as a function of time. As repolymerization was observed after 3 days of incubation, an aromatic-catabolic microbe (Pseudomonas putida KT2440) was incubated with the fungal secretome and DMR-EH lignin. These experiments demonstrated that the presence of the bacterium enhances lignin depolymerization, likely due to bacterial catabolism of LMW lignin, which may partially prevent repolymerization. In addition, proteomics was also applied to the P. eryngii secretome to identify the enzymes present in the fungal cocktail utilized for the depolymerization assays, which highlighted a significant number of glucose/ methanol/choline (GMC) oxidoreductases and laccases. Overall, this study demonstrates that ligninolytic enzymes can be used to partially depolymerize a solid, high lignin content biorefinery stream and that the presence of an aromatic-catabolic bacterium as a “microbial sink” improves the extent of enzymatic lignin depolymerization.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

In Vitro Enzymatic Depolymerization of Lignin with Release of Syringyl, Guaiacyl, and Tricin Units

ABSTRACT New environmentally sound technologies are needed to derive valuable compounds from renewable resources. Lignin, an abundant polymer in terrestrial plants comprised predominantly of guaiacyl and syringyl monoaromatic phenylpropanoid units, is a potential natural source of aromatic compounds. In addition, the plant secondary metabolite tricin is a recently discovered and moderately abundant flavonoid in grasses. The most prevalent interunit linkage between guaiacyl, syringyl, and tricin units is the β-ether linkage. Previous studies have shown that bacterial β-etherase pathway enzymes catalyze glutathione-dependent cleavage of β-ether bonds in dimeric β-ether lignin model compounds. To date, however, it remains unclear whether the known β-etherase enzymes are active on lignin polymers. Here we report on enzymes that catalyze β-ether cleavage from bona fide lignin, under conditions that recycle the cosubstrates NAD + and glutathione. Guaiacyl, syringyl, and tricin derivatives were identified as reaction products when different model compounds or lignin fractions were used as substrates. These results demonstrate an in vitro enzymatic system that can recycle cosubstrates while releasing aromatic monomers from model compounds as well as natural and engineered lignin oligomers. These findings can improve the ability to produce valuable aromatic compounds from a renewable resource like lignin. Many bacteria are predicted to contain enzymes that could convert renewable carbon sources into substitutes for compounds that are derived from petroleum. The β-etherase pathway present in sphingomonad bacteria could cleave the abundant β–O–4-aryl ether bonds in plant lignin, releasing a biobased source of aromatic compounds for the chemical industry. However, the activity of these enzymes on the complex aromatic oligomers found in plant lignin is unknown. Furthermore we demonstrate biodegradation of lignin polymers using a minimal set of β-etherase pathway enzymes, the ability to recycle needed cofactors (glutathione and NAD + ) in vitro , and the release of guaiacyl, syringyl, and tricin as depolymerized products from lignin. These observations provide critical evidence for the use and future optimization of these bacterial β-etherase pathway enzymes for industrial-level biotechnological applications designed to derive high-value monomeric aromatic compounds from lignin.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

Metabolic engineering of the shikimate pathway

The present disclosure relates to engineered microorganisms that produce amino acids and amino acid intermediates. In particular, the disclosure relates to recombinant nucleic acids encoding operons that increase production of aromatic amino acids and the aromatic amino acid intermediate shikimate; microorganisms with increased production of aromatic amino acids and the aromatic amino acid intermediate shikimate; and methods related to the production of aromatic amino acids, the aromatic amino acid intermediate shikimate, and commodity chemicals derived therefrom.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

Role of Pt during hydrodeoxygenation of biomass pyrolysis vapors over Pt/HBEA

1.3 wt% Pt/HBEA and HBEA were studied as catalysts for the hydrodeoxygenation of pine pyrolysis vapors at 500 °C. Both catalysts showed high initial conversion of oxygenated pyrolysis products into aromatic hydrocarbons, while Pt/HBEA showed higher stability in terms of hydrocarbon productivity and deferred breakthrough of oxygenated compounds. Among 1-, 2- and 3-ring aromatic hydrocarbons, Pt/HBEA had a significantly higher selectivity than HBEA towards unalkylated aromatics (e.g., benzene) as compared to the corresponding alkylated aromatics (e.g., toluene and xylene). Additionally, Pt addition to HBEA decreased coke deposition and improved resistance to pore and acid site blockage as determined by TPO, N 2 physisorption, and NH 3 TPD. The ability of Pt to promote cleavage and hydrogenation of methoxy and methyl groups was observed by increased methane production over Pt/HBEA relative to HBEA. A progressive decrease in the methane production over Pt/HBEA correlated with deactivation in terms of reduced benzene formation, breakthrough of oxygenated products, and increased formation of polynuclear aromatics and their degree of substitution, which indicate coke formation. In conclusion, the increased methane yield and suppressed coke formation with the addition of Pt is attributed to hydrogen spillover, through which hydrogen activated on Pt can subsequently migrate to the HBEA support to reverse the coke-forming hydrogen abstraction reaction.

09 BIOMASS FUELS↗
DOE OSTI2026

Lignin to adipic acid in a high-yield chemical and biological redox process

Viable manufacturing pathways to produce bio-based chemicals from renewable feedstocks, such as lignin derived from plant biomass, are needed to decarbonize the chemicals manufacturing sector. Converting the recalcitrant lignin polymer to valuable bioproducts remains a longstanding challenge in biorefining, with the highest reported single-product yield from lignin currently around 20 wt%. Most existing lignin depolymerization strategies target aryl–ether bond cleavage, which can produce aromatic monomers in yields of only about 30 wt%, and still as complex mixtures with C–C-linked dimers and oligomers. The recalcitrance of these C–C linkages between aromatic moieties fundamentally limits single-product yields from lignin, prompting the development of strategies to efficiently cleave these C–C bonds. Here, in this study, we show how reductive processing of lignin from poplar accesses a hydrocarbon mixture of alkyl-aromatic monomers and oligomers that is privileged for oxidative conversion to monomeric aromatic carboxylic acids, comprising mostly benzoic acid and phthalic acid isomers in up to 73 wt% monomer yields, using a Co/Mn/Br catalyst. The soil bacterium Pseudomonas putida KT2440 was engineered to convert this mixture of aromatic carboxylic acids to muconolactone, a precursor to bio-based nylons, enabling final adipic acid yields up to 26 wt% (gram adipic acid per gram lignin) with a maximum theoretical yield of 57 wt%. This pairing of reductive and oxidative steps with lignin resembles processes in petrochemical refining and shows how lignin may be converted into a single, valuable bioproduct in high yields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

An unprecedented quinoid–donor–acceptor strategy to boost the carrier mobilities of semiconducting polymers for organic field-effect transistors

Quinoidal–aromatic conjugated polymers hold great application potential in organic field-effect transistors (OFETs). However, the development of high mobility quinoidal–aromatic conjugated polymers still lags behind the more popular donor–acceptor (D–A) conjugated polymers, mainly owing to the lack of a rational design strategy and efficient building block. Herein, a novel quinoid–donor–acceptor (Q–D–A) strategy is demonstrated to modulate the energy-level and boost the charge carrier transport mobility of conjugated polymers as opposed to the D–A system. On the basis of this strategy, a quinoidal–aromatic conjugated polymer, namely PAQM-BT, is designed and synthesized. With the combined use of quinoid, donor and acceptor units in the backbone, the resulting Q–D–A polymer PAQM-BT displays the narrowest bandgap with the deepest-lying lowest unoccupied molecular orbital (LUMO) energy level, highest backbone coplanarity, enhanced thin-film crystallinity and smallest effective hole mass ($m^*_h$) in comparison with the corresponding D–A polymer PT3B1 and quinoid–donor (Q–D) polymer PAQM-3T. Benefitting from the more effective intra- and inter-chain charge transport, as corroborated by experiment and theoretical calculations, OFET devices based on PAQM-BT exhibit a highly boosted hole mobility of up to 5.10 cm 2 V -1 s -1 , which is one and four orders of magnitude higher than that of PAQM-3T and PT3B1, respectively, and is among the highest for quinoidal–aromatic conjugated polymers. Finally, the potent Q–D–A strategy not only allows the energy level to be modulated but also leads to effective charge carrier transport, opening up possibilities to the development of high mobility quinoidal–aromatic conjugated polymers based on a variety of quinoids, donors, and acceptors.

36 MATERIALS SCIENCE↗
DOE OSTI2013

THE CARRIERS OF THE INTERSTELLAR UNIDENTIFIED INFRARED EMISSION FEATURES: CONSTRAINTS FROM THE INTERSTELLAR C-H STRETCHING FEATURES AT 3.2-3.5 μm

The unidentified infrared emission (UIE) features at 3.3, 6.2, 7.7, 8.6, and 11.3 μm, commonly attributed to polycyclic aromatic hydrocarbon (PAH) molecules, have recently been ascribed to mixed aromatic/aliphatic organic nanoparticles. More recently, an upper limit of <9% was placed on the aliphatic fraction (i.e., the fraction of carbon atoms in aliphatic form) of the UIE carriers based on the observed intensities of the 3.4 μm and 3.3 μm emission features by attributing them to aliphatic and aromatic C-H stretching modes, respectively, and assuming A{sub 3.4}/A{sub 3.3} ≈ 0.68 derived from a small set of aliphatic and aromatic compounds, where A{sub 3.4} and A{sub 3.3} are, respectively, the band strengths of the 3.4 μm aliphatic and 3.3 μm aromatic C-H bonds. To improve the estimate of the aliphatic fraction of the UIE carriers, here we analyze 35 UIE sources exhibiting both the 3.3 μm and 3.4 μm C-H features and determine I{sub 3.4}/I{sub 3.3}, the ratio of the power emitted from the 3.4 μm feature to that from the 3.3 μm feature. We derive the median ratio to be (I{sub 3.4}/I{sub 3.3}) ≈ 0.12. We employ density functional theory to compute A{sub 3.4}/A{sub 3.3} for a range of methyl-substituted PAHs. The resulting A{sub 3.4}/A{sub 3.3} ratio well exceeds ∼1.4, with an average ratio of A{sub 3.4}/A{sub 3.3} ≈ 1.76. By attributing the 3.4 μm feature exclusively to aliphatic C-H stretch (i.e., neglecting anharmonicity and superhydrogenation), we derive the fraction of C atoms in aliphatic form from I{sub 3.4}/I{sub 3.3} ≈ 0.12 and A{sub 3.4}/A{sub 3.3} ≈ 1.76 to be ∼2%. We therefore conclude that the UIE emitters are predominantly aromatic.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗