Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “39”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,207 records · Page 67

Once More on the Lattice of Subvarieties of the Wreath Product of the Variety of Semilattices and the Variety of Semigroups with Zero Multiplication

It is known that the monoid wreath product of any two semigroup varieties that are atoms in the lattice of all semigroup varieties may have a finite as well as an infinite lattice of subvarieties. If this lattice is finite, then as a rule it has at most eleven elements. This was proved in a paper of the author in 2007. The exclusion is the monoid wreath product Sl w N{sub 2} of the variety of semilattices and the variety of semigroups with zero multiplication. The number of elements of the lattice L(Sl w N{sub 2}) of subvarieties of Sl w N{sub 2} is still unknown. In a previous paper, we have shown that the lattice L(Sl w N{sub 2}) contains a sublattice having 33 elements. In the present paper, it is proved that the lattice under consideration has exactly three maximal subvarieties. As a first application of the obtained results we calculate the finite basis of the lattice union of the variety of all semilattices and the largest variety among subvarieties of our lattice having at least one heterotypic identity. As a second application we show that the considered lattice of subvarieties has at least 39 elements.

97 MATHEMATICS AND COMPUTING↗

Production of 37Ar in The University of Texas TRIGA reactor facility

The detection of {sup 37}Ar is important for on-site inspections for the Comprehensive Nuclear-Test-Ban Treaty monitoring. In an underground nuclear explosion this radionuclide is produced by {sup 40}Ca(n,{alpha}){sup 37}Ar reaction in surrounding soil and rock. With a half-life of 35 days, {sup 37}Ar provides a signal useful for confirming the location of an underground nuclear event. An ultra-low-background proportional counter developed by Pacific Northwest National Laboratory is used to detect {sup 37}Ar, which decays via electron capture. The irradiation of Ar gas at natural enrichment in the 3L facility within the Mark II TRIGA reactor facility at The University of Texas at Austin provides a source of {sup 37}Ar for the calibration of the detector. The {sup 41}Ar activity is measured by the gamma activity using an HPGe detector after the sample is removed from the core. Using the {sup 41}Ar/{sup 37}Ar production ratio and the {sup 41}Ar activity, the amount of {sup 37}Ar created is calculated. The {sup 41}Ar decays quickly (half-life of 109.34 minutes) leaving a radioactive sample of high purity {sup 37}Ar and only trace levels of {sup 39}Ar.

37Ar, CTBT, On-Site Inspections, Radioargon↗

Uncovering Uranium Isotopic Heterogeneity of Fuel Pellets from the Fifth Collaborative Materials Exercise of the Nuclear Forensics International Technical Working Group

In 2017, the Nuclear Forensics International Technical Working Group (ITWG) organized their fifth 37 Collaborative Materials Exercise (CMX-5). The exercise samples were two uranium dioxide fuel pellets 38 manufactured from the same starting materials by different processes to have similar bulk isotopic 39 composition, but different spatial uranium isotopic distributions. Sets of identical materials were sent to 40 all participating laboratories, who then utilized their existing nuclear forensic capabilities to 41 independently analyse fuel pellets and identify similarities and differences of the materials’ 42 characteristics. The analytical methods used to probe the fuel pellets included ex situ, such as sectioning 43 or breaking up the pellets and analyzing dissolved pieces using inductively coupled plasma mass 44 spectrometry (ICP-MS), analyzing particles collected from intact or fragmented pellets by secondary ion 45 mass spectrometry (SIMS), as well as in situ methods, such as laser ablation coupled with ICP-MS, 46 autoradiography and nanoSIMS. In this paper we present the results of these independent analyses and 47 compare the capabilities of those nuclear forensic analytical methods to uncover details of the isotopic 48 heterogeneity of uranium fuel pellets.

Nuclear Forensic Analysis of Uranium Fuel Pellets,↗

Photonuclear production of 225 Ac from 226 Ra targets

Herein we report proof of principal production of 225 Ac via 226 Ra(γ , n) 225 Ra $\overset{^-β}{\rightarrow}$ 225 Ac and subsequent chemical separation via extraction chromatography using BDGA and Ln resins. Irradiation of 0.35 µg 226 Ra with 39 MeV bremsstrahlung end-point energy photons produced 225 Ra and 224 Ra at a rate of 754 and 2215 kBq/g 226 Ra/mA/h, respectively. The production rate of 225 Ac determined at its peak radioactivity was 335 kBq/g 226 Ra/mA/h. Radiochemically pure 225 Ac was isolated with a minimum separation factor of 125,000 for 225 Ac: 226 Ra. In conclusion, these results are promising and lay the foundation for future studies to scale-up production for preclinical quantities of high purity 225 Ac using the 226 Ra(γ , n) 225 Ra $\overset{^-β}{\rightarrow}$ 225 Ac approach.

38 - RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCL↗

Substituent Effects in the Pyridinium Catalyzed Reduction of CO 2 to Methanol: Further Mechanistic Insights

A series of substituted pyridiniums were examined for their catalytic ability to electrochemically reduce carbon dioxide to methanol. It is found that in general increased basicity of the nitrogen of the amine and higher LUMO energy of the pyridinium correlate with enhanced carbon dioxide reduction. The highest faradaic yield for methanol production at a platinum electrode was 39 ± 4 % for 4-aminopyridine compared to 22 ± 2 % for pyridine. However, 4-tertbutyl and 4-dimethylamino pyridine showed decreased catalytic behavior, contrary to the enhanced activity associated with the increased basicity and LUMO energy, and suggesting that steric effects also play a significant role in the behavior of pyridinium electrocatalysts. As a result, mechanistic models for the the reaction of the pyridinium with carbon dioxide are considered.

14 SOLAR ENERGY↗

Coefficient of ultrasound transmission from liquid helium to aluminum in the intermediate state at T {approx} 0.1 K

The coefficient {alpha}({theta}) of ultrasound transmission from liquid {sup 4}He to an aluminum single crystal in intermediate, superconducting, and normal states at a temperature T {approx} 0.1 K is measured as a function of the polar angle {theta} at the azimuthal angle {phi} = 0. The experimental technique is based on the measurement of the Kapitza temperature jump at the interface between two media. The dependences of the transmission coefficient for the Rayleigh modes on the sound frequency (in the range 13-194 MHz) and the magnetic field strength are determined. It is demonstrated that the integrated transmission coefficient of the aluminum single crystal in the intermediate state at an angle {theta}{sub R} larger than the critical value increases with an increase in the magnetic field strength. The integrals of the transmission coefficient in magnetic fields close to the field H{sub c} are independent of the frequency. In the vicinity of H = 0, the transmission coefficient at {nu} > 39 MHz increases only slightly with increasing frequency. At the lowest frequencies, the transmission coefficient increases anomalously as the frequency decreases. The experimental data are compared with the results obtained in the framework of the Andreev theory. Numerical calculations are performed and the dependences {alpha}({theta}, {phi}) for bulk modes in the range corresponding to angles smaller than the critical value are constructed for the three principal planes of the crystal, i.e., the (001), (011), and (111) planes. The dependence {alpha}({theta}) is obtained for the azimuthal angle {phi} = 0. The width of the Rayleigh peak is estimated.

36 MATERIALS SCIENCE↗

Crystal Plasticity Model Validation Using Combined High-Energy Diffraction Microscopy Data for a Ti-7Al Specimen

High-Energy Diffraction Microscopy (HEDM) is a 3-d x-ray characterization method that is uniquely suited to measuring the evolving micromechanical state and microstructure of polycrystalline materials during in situ processing. The near-field and far-field configurations provide complementary information; orientation maps computed from the near-field measurements provide grain morphologies, while the high angular resolution of the far-field measurements provide intergranular strain tensors. The ability to measure these data during deformation in situ makes HEDM an ideal tool for validating micro-mechanical deformation models that make their predictions at the scale of individual grains. Crystal Plasticity Finite Element Models (CPFEM) are one such class of micro-mechanical models. While there have been extensive studies validating homogenized CPFEM response at a macroscopic level, a lack of detailed data measured at the level of the microstructure has hindered more stringent model validation efforts. Here, we utilize an HEDM dataset from an alphatitanium alloy (Ti-7Al), collected at the Advanced Photon Source, Argonne National Laboratory, under in situ tensile deformation. The initial microstructure of the central slab of the gage section, measured via near-field HEDM, is used to inform a CPFEM model. The predicted intergranular stresses for 39 internal grains are then directly compared to data from 4 far-field measurements taken between ~4% and ~80% of the macroscopic yield strength. In conclusion, the intergranular stresses from the CPFEM model and far-field HEDM measurements up to incipient yield are shown to be in good agreement, and implications for application of such an integrated computational/experimental approach to phenomena such as fatigue and crack propagation is discussed.

36 MATERIALS SCIENCE↗

Solving Recent Challenges for Wrought Ni-Base Superalloys

This paper reviews the status of technology in design and manufacture of new wrought 21 polycrystalline Ni-base superalloys for critical engineering applications. There is a strong 22 motivation to develop new alloys that are capable of operating at higher temperatures to 23 realise improvements in thermal efficiency, which are necessary to achieve environmental 24 targets for reduced emissions of harmful green-house gases. From the aerospace sector, 25 the development of new powder metallurgy and ingot metallurgy alloys are discussed for 26 disk rotor and static applications. New compositions for powder metallurgy contain about 27 50-55% of gamma prime (γ') strengthening precipitates to ensure components operate 28 successfully at temperatures up to 788°C (1450°F). In contrast, new compositions for ingot 29 metallurgy aim to occupy a design space in temperature capability between Alloy 718 and 30 current powder alloys that are in-service, and show levels of γ' of about 30-44%. The focus 31 in developing these alloys was design for manufacturability. To complement the aerospace 32 developments, a review of work to understand the suitability of candidate alloys for multiple 33 applications in Advanced-Ultra Supercritical (AUSC) power plants has been undertaken by 34 Detrois, Jablonski and Hawk from the National Energy Technology Laboratory. In these 35 power plants, steam temperatures are required to reach 700-760°C. The common thread is 36 to develop alloys that demonstrate a combination of high temperature properties, which are 37 reliant on both the alloy composition and microstructure and can be produced readily at the 38 right price. For the AUSC applications, the emphasis is on high temperature strength, long 39 term creep life, phase stability, oxidation resistance and robust welding for fabrications. 40 Whereas for powder disk rotors in aircraft engines, the priority is enhanced resistance to 41 time dependent crack growth, phase stability and resistance to environmental damage, while 42 extending the current strength levels, which are shown by existing alloys, to higher 43 temperatures.

36 MATERIALS SCIENCE↗

Improving the Strength of the ZrC-SiC and TC4 Brazed Joint Through Fabricating Graded Double-Layered Composite Structure on TC4 Surface

In order to improve the ZrC-SiC ceramic and TC4 brazed joint property, graded double-layered SiC particles (SiCp)-reinforced TC4-based composite structure (named as GLS for convenience) was designed to relieve the residual stress in the joint. The GLS was successfully fabricated on TC4 substrate by double-layered laser deposition technology before the brazing process. The investigation of the GLS shows that the volume fraction of SiCp in the two composite layers was graded (20 and 39 vol pct, respectively). Ti{sub 5}Si{sub 3} and TiC phases formed in the GLS due to the reaction of SiCp and TC4. The laser power-II (the laser power for the second deposition layer) affected the microstructure of the GLS significantly. Increasing the laser power-II would promote the reaction between the SiCp and TC4. But the high laser power-II made the layer I remelt completely and the two layers became homogeneous rather than graded structure. In the ZrC-SiC and TC4 brazed joint, the CTE (coefficient of thermal expansion) was graded from the TC4 to the ZrC-SiC due to the GLS, and the strength of the joint with the GLS (91 MPa) was higher than that without the GLS (43 MPa).

36 MATERIALS SCIENCE↗

Solidification and Liquation Cracking Behavior of Dual-Phase Steel DP600

In this work, the solidification and liquation cracking behavior of a dual-phase steel DP600 was examined using longitudinal Varestraint testing and hot ductility testing. Varestraint tests showed only limited cracking even at 4 pct augmented strain. Hot ductility tests showed that the nil-strength temperature of the steel was 1459 °C, while the nil-ductility and the ductility-recovery temperatures were 1435 °C and 1420 °C, respectively. The brittleness temperature range was found to be 39 °C, and the DP600 steel was highly resistant to both weld metal solidification cracking and heat-affected zone liquation cracking. The reasons for the high hot cracking resistance of dual-phase steel DP600 are discussed.

36 MATERIALS SCIENCE↗

Weldability and Impact Energy Properties of High-Hardness Armor Steel

In this study, the weldability of high-hardness armor steel by the gas metal arc welding method has been investigated. The study was aimed at determining the weakness points of manual welding compared to automated welding through microhardness testing, the cooling rate, tensile characteristics and nondestructive analysis. Detailed studies were performed for automated welding on the impact energy and microhardness in the fusion line, as the most sensitive zone of the armor steel weld joint. It was demonstrated that the selection of the preheating and interpass temperature is important in terms of the cooling rate and quantity of diffusible and retained hydrogen in the weld joint. The tensile strength was higher than 800 MPa. The width of the heat-affected zone did not exceed 15.9 mm, measured from the weld centerline, while the impact energy results were 74 and 39 J at 20 and – 40 °C, respectively.

36 MATERIALS SCIENCE↗

Microstructure and Friction-Wear Behavior of Multi-arc Ion Plating TiAlNC Ceramic Coating on WC-6%Co Substrate

Nanocomposite coating could be used for machining tools, which can be used for cutting, drilling, milling, whetting, profiling, honing and superfinishing of various materials with high productivity. In this work, the TiAlNC ceramic coating was prepared by multi-arc ion plating method on WC-6%Co substrate. The microstructure and morphology of the coating were observed by scanning electron microscopy and transmission electron microscopy. The phase and chemical composition of the coating were determined by x-ray diffraction and x-ray energy-dispersive spectroscopy, respectively. The adhesive force of the coating was measured by a scratch tester, at the same time the friction-wear behavior of the coating was studied. The results show that there were TiN and (Ti,Al)(N,C) two phases, and there was the coexistence of amorphous and nanocrystalline in the coating. The chemical composition of the coating was composed of 20 ± 9 at.% Ti, 16 ± 5 at.% Al, 39 ± 5 at.% N and 25 ± 10 at.% C. The thickness of the coating was about 4.5 μm. The average root mean square value of the surface roughness was 225 ± 16 nm. A critical force for coating failure in scratch testing was about 25 N. The friction coefficients of the substrate and the coating were 0.55 and 0.35, respectively. The ceramic coating could improve the wear resistance of the substrate.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Effect of Weld Metal Composition on Microstructural and Mechanical Properties of Dissimilar Welds Between Monel 400 and Inconel 600

The current work was carried out to characterize welding of Inconel 600 superalloy and Monel 400. In the present study, gas tungsten arc welding (GTAW) with four types of filler metals (ENiCu, ENiCu-7, ENiCr-3 and ENiCrFe-3) was utilized. The filler metals were categorized into two groups based on the presence of Cr and Nb in their chemical composition. This paper describes the selection and application of welding consumables in manufacturing dissimilar metal combinations. It was found that (Nb/Cr) ratio and Fe content can affect on the size and amount of carbides. During solidification of ENiCr-3 and ENiCrFe-3 filler metals, Nb leaves dendritic cores and is rejected to inter-dendritic regions because of its high tendency for segregation. However, No brittle Laves phase was detected in the welds. The interface between weld metal and base metal and gradual changes in alloying elements were also investigated by scanning electron microscopy. EDX analysis was also applied for different samples. Microhardness measurements and tensile test were performed on the joints. The average hardness value in the weld metal obtained from ENiCrFe-3 is higher than the other welds. ENiCu-7 weld exhibited the highest tensile strength of 540 MPa and percent elongation of 53% in contrast to ENiCrFe-3 weld with the lowest tensile strength (518 MPa) and percent elongation (39%).

36 MATERIALS SCIENCE↗

Improved Stress Tolerance of Saccharomyces cerevisiae by CRISPR-Cas-Mediated Genome Evolution

In bioprocesses, a microorganism with high tolerance to various stresses would be advantageous for efficient bio-based chemical production. Yeast Saccharomyces cerevisiae has long been used in the food industry because of its safety and convenience, and genetically engineered S. cerevisiae strains have been constructed and used for the production of various bio-based chemicals. In this study, we developed a novel genome shuffling method for S. cerevisiae using CRISPR-Cas. By using this, the thermotolerant mutant strain T8-292, which can grow well at 39 °C, was successfully created. The strain also showed higher cell viability in low pH and high ethanol concentration. In addition, the differences in genome structure between mutant and parent strains were suggested by random amplified polymorphic DNA PCR method. Our genome shuffling method could be a promising strategy for improvement of various stress tolerance in S. cerevisiae.

60 APPLIED LIFE SCIENCES↗

Outcomes in patients ≥ 80 years with a diagnosis of a hepatopancreaticobiliary (HPB) malignancy

Older patients are underrepresented in oncological clinical trials. The incidence of hepatopancreaticobiliary (HPB) malignancies is higher in older patients, but data on outcomes are lacking. This study assessed patient outcomes in those < 80 and ≥ 80 years with a HPB malignancy seen at a tertiary referral centre, The Christie NHS Foundation Trust. Data on patients with a HPB malignancy were collected retrospectively between 2012 and 2017 via on-line case-note review. Survival was calculated using the Kaplan–Meier method and prognostic factors using log-rank analysis. Of 1421 patients, 10% were ≥ 80 years. Of patients < 80 and ≥ 80 years, 56% and 57% had pancreas cancer, 39% and 36% biliary tract cancer, and 5% and 7% had hepatocellular carcinoma, respectively. Amongst patients ≥ 80 years, 75% had an Eastern Cooperative Oncology Group performance status (ECOG PS) 0–2. Patients ≥ 80 years had higher rates of comorbidity; 28% received systemic anti-cancer therapy (SACT), compared with 62% of patients < 80 years. Best supportive care (BSC) was instituted in 44% of older patients, compared with 13% in those < 80 years. Of patients ≥ 80 years who received SACT, 82% received monotherapy. Median overall survival (OS) for patients receiving palliative SACT was 10.07 months (95% CI 8.89–11.08) and 10.10 months (95% CI 6.30–12.30) in patients < 80 and ≥ 80 years, respectively, p 0.41; ECOG PS (p < 0.001) was prognostic for OS in older patients but Adult Comorbidity Evaluation-27 comorbidity score (p = 0.07, when comparing groups of ACE score ≤ 1 and > 1) was not. Baseline factors were similar in both age cohorts, but more comorbidities were present in older patients. Older patients were less likely to receive SACT, but when they did, they had an equivalent benefit in OS to younger patients.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Impact of cardiac reverse remodeling after cardiac resynchronization therapy assessed by myocardial perfusion imaging on ventricular arrhythmia

Background: Although cardiac resynchronization therapy (CRT) has been a useful treatment of heart failure, patients with CRT are still in risk of sudden cardiac death due to ventricular arrhythmia. The aim of this study was to investigate the impact of cardiac reverse remodeling after CRT on the prevalence of ventricular tachycardia or fibrillation (VT/VF). Methods and Results: Forty-one heart failure patients (26 men, age 66 ± 10 years), who were implanted with CRT for at least 12 months, were enrolled. All patients received myocardial perfusion imaging (MPI) under CRT pacing to evaluate left ventricle (LV) function, dyssynchrony, and scar. VT/VF episodes during the follow-up period after MPI were recorded by the CRT devices. Sixteen patients (N = 16/41, 39%) were found to have VT/VF. Multivariate Cox regression analysis and receiver operating characteristic curve analysis showed that five risk factors were significant predictors of VT/VF, including increased left ventricle ejection fraction (LVEF) by ≤7% after CRT, low LVEF after CRT (≤30%), change of intrinsic QRS duration (iQRSd) by ≤7 ms, wide iQRSd after CRT (≥121 ms), and high systolic dyssynchrony after CRT (phase standard deviation ≥45.6°). For those patients with all of the 5 risk factors, 85.7% or more developed VT/VF. Conclusions: The characteristics of cardiac reverse remodeling after CRT as assessed by MPI are associated with the prevalence of ventricular arrhythmia.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Accuracy of 99mTc-Hydroxymethylene diphosphonate scintigraphy for diagnosis of transthyretin cardiac amyloidosis

Background and Aim: Either 99mTechnetium diphosphonate (Tc-DPD) or pyrophosphate (Tc-PYP) scintigraphy plays a relevant role in diagnosing transthyretin cardiac amyloidosis (CA), and labeled radiotracers have been extensively studied in diagnosing CA. Few studies have analyzed and validated 99mTc-Hydroxymethylene diphosphonate (Tc-HMDP). Our aim was to validate the diagnostic accuracy of Tc-HMDP total-body scintigraphy in a cohort of patients with biopsy-proven transthyretin CA. Methods and Results: We retrospectively evaluated all patients undergoing 99mTc-HMDP total-body scintigraphy, in adjunct to a comprehensive diagnostic work-up for suspected CA. Sixty-five patients were finally diagnosed with CA, while it was excluded in 20 subjects with left ventricular hypertrophy of various etiologies. Twenty-six patients had AL-CA, 39 had TTR CA (16 TTRm, 23 TTRwt). At Tc-HMDP scintigraphy, 2 AL patients showed a Perugini score grade 1 heart uptake, while 24 showed no uptake. All TTR patients showed Tc-HMDP uptake, with three patients showing a Perugini score grade 1, 16 grade 2, and 20 grade 3, respectively. No uptake was observed in patients with left ventricular hypertrophy. A positive Tc-HMDP scintigraphy showed a 100% sensitivity and a 96% specificity for TTR CA identification. Conclusions: Tc-HMDP scintigraphy is as accurate as Tc-DPD or Tc-PYP, and may therefore de facto be considered a valuable tool for the diagnosis of TTR CA.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Corrected coronary opacification decrease from coronary computed tomography angiography: Validation with quantitative 13N-ammonia positron emission tomography

Background: To assess the functional relevance of a coronary artery stenosis, corrected coronary opacification (CCO) decrease derived from coronary computed tomography angiography (CCTA) has been proposed. The present study aims at validating CCO decrease with quantitative 13N-ammonia positron emission tomography (PET) myocardial perfusion imaging (MPI). Methods and Results: This retrospective study consists of 39 patients who underwent hybrid CCTA/PET-MPI. From CCTA, attenuation in the coronary lumen was measured before and after a stenosis and corrected to the aorta to calculate CCO and its decrease. Relative flow reserve (RFR) was calculated by dividing the stress myocardial blood flow (MBF) of a vessel territory subtended by a stenotic coronary by the stress MBF of the reference territories without stenoses. RFR was abnormal in 11 vessel territories (27%). CCO decrease yielded a sensitivity, specificity, negative predictive value, positive predictive value, and accuracy for prediction of an abnormal RFR of 73%, 70%, 88%, 47%, and 70%, respectively. Conclusions: CCTA-derived CCO decrease has moderate diagnostic accuracy to predict an abnormal RFR in PET-MPI. However, its high negative predictive value to rule out functional relevance of a given lesion may confer clinical implications in the diagnostic work-up of patients with a coronary stenosis.

62 RADIOLOGY AND NUCLEAR MEDICINE↗