Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Effect of Swirl on Turbulent Structures in Supersonic Jets

Direct Numerical Simulation (DNS) is used to study the mechanism of generation and evolution of turbulence structures in a temporally evolving supersonic swirling round jet and also to examine the resulting acoustic radiations. Fourier spectral expansions are used in the streamwise and azimuthal directions and a 1-D b-spline Galerkin representation is used in the radial direction. Spectral-like accuracy is achieved using this numerical scheme. Direct numerical simulations, using the b-spline spectral method, are carried out starting from mean flow initial conditions which are perturbed by the most unstable linear stability eigenfunctions. It is observed that the initial helical instability waves evolve into helical vortices which eventually breakdown into smaller scales of turbulence. 'Rib' structures similar to those seen in incompressible mixing layer flow of Rogers and Moserl are observed. The jet core breakdown stage exhibits increased acoustic radiations.

Rao, Ram Mohan↗
NASA NTRS1998

Effect of Swirl on Turbulent Structures in Supersonic Jets

Direct numerical simulation (DNS) is used to study the mechanism of generation and evolution of turbulence structures in a temporally evolving supersonic swirling round jet and also to examine the resulting acoustic radiations. Fourier spectral expansions are used in the streamwise and azimuthal directions and a 1-D b-spline Galerkin representation is used in the radial direction. Spectral-like accuracy is achieved using this numerical scheme. Direct numerical simulations, using the b-spline spectral method, are carried out starting from mean flow initial conditions which are perturbed by the most unstable linear stability eigenfunctions. It is observed that the initial.helical instability waves evolve into helical vortices which eventually breakdown into smaller scales of turbulence. 'Rib' structures similar to those seen in incompressible mixing layer flow of Rogers and Moser are observed. The jet core breakdown stage exhibits increased acoustic radiations.

Rao, Ram Mohan↗
NASA NTRS2022

Geodetic Investigations of the Mission Concept MAGIC to Reveal Callisto’s Internal Structure

Geodetic and geophysical investigations of the Galilean moon Callisto address fundamental questions regarding the formation and evolution of the Jovian system. Callisto's evolution and internal structure appear to significantly differ from the other Jovian satellites. Similarly-sized Ganymede is a highly evolved ice-rock moon with a differentiated interior, intrinsic magnetic field, and abundant surface evidence of internal activity. In contrast, Callisto's surface is ancient, and Galileo spacecraft data suggest its interior is only incompletely differentiated, despite the presumed presence of a sub-surface ocean. These properties make Callisto uniquely able to constrain the timing and nature of the Jovian system formation. The Magnetics, Altimetry, Gravity, and Imaging of Callisto (MAGIC) mission concept is conceived to fully characterize the properties of this enigmatic moon from its deep interior to the icy shell. Three main instruments are included as a scientific payload. Highly accurate measurements of Callisto's topography, magnetic field, and morphology are obtained by the onboard laser altimeter, magnetometer, and camera, respectively. The telecommunication system supports an additional gravity and radio science investigation. Long- and short-wavelength gravity anomalies afford powerful constraints on internal differentiation and the properties of the hydrosphere (water and ice). Comprehensive numerical simulations and covariance analyses of MAGIC mission scenarios presented in this paper show that the gravitational degree-2 normalized coefficients and the pole obliquity enable the determination of the moment of inertia with an accuracy better than 0.015%. The combination of gravity and altimetry measurements acquired by MAGIC are essential to the characterization of Callisto's interior if – as is likely – the degree-2 gravity includes non-hydrostatic terms. MAGIC's radio science data yield the estimation of Callisto's gravity field with spatial resolutions of <100 km. The combination of gravitational and deformation tides that are retrieved by the radio science and altimetry investigations, respectively, leads to the recovery of the rigid ice shell thickness to within ∼3 km. Together these datasets would resolve ambiguities inherent in Galileo flyby data, revealing Callisto's interior structure as well as the existence and properties of its postulated internal ocean.

Antonio Genova↗
DOE OSTI2025

Investigating the Effects of Copper Impurity Deposition on the Structure and Electrochemical Behavior of Hydrogen Evolution Electrocatalyst Materials

Electrolysis of impure water (such as seawater) has recently garnered research interest as it may enable hydrogen production at reduced costs. However, the tendency of impurity ions and other species to degrade electrocatalysts and membranes within an electrolyzer is a serious challenge. Here, we investigate the effects of copper impurities of varying concentrations on the hydrogen evolution reaction (HER) using platinum electrocatalysts. A decrease of current density is observed with an increasing copper concentration. By comparing the effect of ionic impurities on current density at different concentrations, we gain insight into how impurities can interfere with the HER at different potentials. Surface characterization of the electrodes reveals differences in the morphology and extent of copper deposition on HER-active platinum vs inactive gold electrodes. This enables an improved understanding of how copper nucleates and grows on the two types of electrodes under different electrochemical conditions while also confirming deposition in low-concentration cases, as present in seawater. The results indicate that copper electrodeposition competes with the HER, and the nature of copper electrodeposition varies depending on the electrocatalytic activity of the electrode. This study provides insight toward catalyst design that can withstand the effects of impurity-induced degradation over extended use.

08 HYDROGEN↗
DOE OSTI2026

Chemical and Structural Insights into Solid Electrolyte Interphase Evolution for Sodium Metal Electrodes

The solid electrolyte interphase (SEI) critically governs the reversibility of sodium metal batteries, through dynamically mediating ion transport and interfacial reactions. However, its kinetic evolution under operating conditions, and how it influences interfacial stability, remains poorly understood. Here, in this study, we reveal that the SEI undergoes coupled chemical and mechanical changes during sodium plating and stripping, leading to spatial and temporal heterogeneity that drives interfacial degradation. Synchrotron operando grazing-incidence wide-angle X-ray scattering and soft X-ray absorption spectroscopy capture the sequential formation and dissolution of inorganic SEI phases (NaF, NaH, NaOH, Na 2 PO 3 F), accompanied by depth-dependent alterations in organic SEI components. Mesoscale modeling connects this evolving SEI heterogeneity to localized current density fluctuations and stress accumulation at the Na interface, identifying pathways to electrically isolated sodium formation. These findings show that SEI instability fundamentally limits reversibility in sodium metal batteries, and that controlling SEI chemistry–mechanics coupling is essential to achieving its durability.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Mg and native defects in cubic silicon carbide from first principles

The diffusion of Mg defects in 3C-SiC is studied using the density functional theory. Mg has the highest burn-in rate as a transmutant in 3C-SiC when it is placed in high-energy neutron irradiation environment of a fusion reactor. The presence and evolution of transmutant defects impact thermal and mechanical properties of this important structural material. This study is focused on understanding the structure, stability, and evolution of Mg defects and the interaction of Mg with native defects in 3C-SiC. Our calculations of diffusion coefficients for different Mg defects suggest that Mg is likely to diffuse faster in pristine 3C-SiC than in the damaged one, in agreement with earlier experimental observations.

36 MATERIALS SCIENCE↗
NASA NTRS1982

VLA observations of the evolution of a solar burst source structure at 6 centimeter wavelength

Evolutionary changes in the total intensity and polarization structure of a 6 cm radio burst source have been observed with the VLA, over time scales ranging from 10 s to several minutes. This burst was associated with a 2B/M1 flare observed on 1980 May 14. The 6 cm burst consisted of a gradual phase of 30 minutes duration and a strong impulsive phase of duration less than two minutes. Synthesized maps of total intensity and polarization were obtained with spatial resolution of 2 x 3 arcsec and with temporal resolutions of five minutes during the gradual phase and 10 s during the impulsive phase. The sequence of polarization maps suggests a complex magnetic field structure undergoing rapid changes. Most importantly, they show the development of two bipolar regions or quadrupole structure just prior to the impulsive energy release.

Velusamy, T.↗
NASA NTRS1988

Evolution of large-sclae plasma structures in comets: Kinematics and physics

Disconnection Events are the dramatic part of the periodic morphology involving the separation of the entire plasma tail from the head region of the comet and the growth of a new plasma. The coordinated observations of Comet Halley recorded approximately 30 DEs during the 7 months of plasma activity; 19 of these are obvious. The plasma physics of these events were approached via a detailed, kinematic investigation of specific DEs and the solar-wind environment associated with it. As the detailed investigations are completed, researchers should be able to answer the question of a single or multiple mechanism(s) for DEs and determine which mechanism(s) are important. At present, the mechanism of sunward magnetic reconnection caused by interplanetary sector boundary crossing in consistent with the data available.

Brandt, John C.↗
NASA NTRS1991

Evolution on large-scale plasma structures in comets: Kinematics and physics

The disconnection event (DE) consists of the periodic loss of a comet's entire plasma tail and the growth of a new one. This spectacular phenomenon is not understood. The strategy was to assemble a data base of specific events studied in detail, determine the solar wind conditions responsible for DEs, and develop a consistent physical model. Analysis is complete for the sequence of DEs that took place during 13 to 18 April 1986. The first DE correlates well with a sector boundary crossing for the comet and a group of DEs that occurred approximately a day later could have produced by polarity reversals seen in the IMP-8 data. Thus, these DEs are consistent with the frontside, magnetic reconnection mechanism.

Brandt, John C.↗
NASA NTRS1992

Model of a rotating magnetic cloud

The possibility that magnetic clouds rotate while they propagate antisunward was investigated. Magnetic clouds are modeled as magnetic flux ropes which rotate rigidly about the axis of symmetry. An ideal magnetohydrodynamic model, in which the evolution of the magnetic structure is related to the time evolution of the angular frequency, is developed. A class of 'separable' magnetic fields is employed to reduce the problem to a nonlinear ordinary differential equation for the evolution function, and it is solved numerically. The corresponding effective potential gives rise to two modes of evolution--expansion and oscillation--depending on the energy and on the value of a dimensionless parameter, k. Parameter k depends on the gas pressure, the ratio of the magnetic field components, and the frequency of rotation. There is a critical value of k, k(sub c), above which the oscillatory regime disappears and the flux rope invariably expands, regardless of the energy. Below k(sub c) the energy determines whether the configuration is confined or unbounded. Rotation always helps expansion by lowering the potential barrier. A data example was studied and features which are interpreted as signatures of rotation are presented. The angular speed is comparable to the Alfven speed, and the core of the rotating cloud completes on average one full revolution every three days at 1 AU. The parameter k is calculated from observations, and it is found to be close to, but below, critical. Only three out of the nine clouds examined showed signatures of rotation. Theoretical analysis suggests that close to the Sun rotation effects may play a more important role in the evolution of magnetic clouds than 1 AU.

Farrugia, C. J.↗
NASA NTRS1993

Evolution of large-scale plasma structures in comets: Kinematics and physics

Cometary and solar wind data from December 1985 through April 1986 are presented for the purpose of determining the solar wind conditions associated with comet plasma tail disconnection events (DE's). The cometary data are from The International Halley Watch Atlas of Large-Scale Phenomena (Brandt, Niedner, and Rahe, 1992). In addition, we present the kinematic analysis of 4 DE's, those of Dec. 13.5 and 31.2, 1985, and Feb. 21.7 and 28.7, 1986. The circumstances of these DE's clearly illustrate the need to analyze DE's in groups. In situ solar wind measurements from IMP-8, ICE, and PVO were used to construct the variation of solar wind speed, density, and dynamic pressure during this interval. Data from these same spacecraft plus Vega-1 were used to determine the time of 48 current sheet crossings. These data were fitted to heliospheric current sheet curves extrapolated from the corona into the heliosphere in order to determine the best-fit source surface radius for each Carrington rotation. Comparison of the solar wind conditions and 16 DE's in Halley's comet (the four DE's discussed in this paper and 12 DE's in the literature) leaves little doubt that DE's are associated primarily with crossings of the heliospheric current sheet and apparently not with any other property of the solar wind. If we assume that there is a single or primary physical mechanism and that Halley's DE's are representative, efforts at simulation should concentrate on conditions at current sheet crossings. The mechanisms consistent with this result are sunward magnetic reconnection and tailward magnetic reconnection, if tailward reconnection can be triggered by the sector boundary crossing.

Brandt, John C.↗
DOE OSTI2020

3D Experimental Measurements of Evolution of Force Chains in Natural Silica Sand

The mechanisms of force transmission in granular materials is a classic physics problem that has been addressed since the 19th century, when Heinrich Rudolf Hertz investigated the interaction between two similar objects that were in contact under compression. However, the study of force transmission mechanisms in assemblies of more particles has proven to be a formidable problem due to the complex nature of granular materials. In recent years, synchrotron microcomputed tomography (SMT) and three-dimensional X-ray diffraction microscopy (3DXRD) have been employed to study the mechanics of granular materials experimentally. Combining SMT and 3DXRD offers unique three-dimensional (3D) experimental measurements of the internal structure, kinematics (such as rotation and translation), and lattice strains of individual sand particles. In this paper, in situ SMT and 3DXRD scans were acquired at multiple load steps for a specimen composed of 2,705 natural Ottawa sand particles that were subjected to one-dimensional (1D) confined compression. An algorithm was developed to combine SMT images and 3DXRD lattice strain measurements and used to characterize the constitutive behavior of sand particles. The results were used to identify the crystal structure and the evolution of the stresses and lattice strains of individual sand particles. Another algorithm was developed to characterize the force structures within the specimen. Force structures were identified, and their properties (such as length) and evolution through the experiment were examined. The contact number of particles is a particle-scale property that affects the mechanics of granular materials. The effect of the contact number of the sand particles on the onset and evolution of the force structures was also investigated and discussed.

3D x-ray diffraction microscopy↗
DOE OSTI2026

Electronic Structure of Compressively Strained Bilayer Nickelate Thin Film

The discovery of superconductivity in bulk bilayer nickelates under high pressure, and its subsequent stabilization in compressively strained thin films at ambient pressure, has established a new platform for exploring high-𝑇 c superconductivity beyond the cuprates. Central to this development is the prominent role of the 3⁢𝑑$^2_𝑧$ orbital in shaping the low-energy electronic structure, imposing constraints on microscopic theories and fueling debate over the superconducting mechanism. Here we report a systematic in situ angle-resolved photoemission spectroscopy study of compressively strained bilayer nickelate thin films spanning Ca doping, oxygen stoichiometry and film thickness. Despite variations in oxygen-vacancy disorder and surface termination, the electronic structure remains robust and exhibits a systematic strain-driven evolution consistent with an intermediate-correlation regime. In particular, we demonstrate a Ca-doping-induced electronic structure evolution that is consistent with Fermi-level crossing of the 𝛾 band and is decoupled from the presence of superconductivity, suggesting that, while important for the 𝛾 band to be near the Fermi level, the debated 𝛾 crossing and the resulting Fermi pocket may not be a prerequisite for superconductivity. Together, our results establish key spectroscopic constraints on the minimal fermiology and correlation strength relevant to superconductivity in bilayer nickelates, providing an experimental foundation for microscopic theories of their pairing mechanism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Temporal dynamics of large-scale structures for turbulent Rayleigh–Bénard convection in a moderate aspect-ratio cylinder

We investigate the spatial organization and temporal dynamics of large-scale, coherent structures in turbulent Rayleigh–Bénard convection via direct numerical simulation of a 6.3 aspect-ratio cylinder with Rayleigh and Prandtl numbers of 9.6×10 7 and 6.7, respectively. Fourier modal decomposition is performed to investigate the structural organization of the coherent turbulent motions by analysing the length scales, time scales and the underlying dynamical processes that are ultimately responsible for the large-scale structure formation and evolution. We observe a high level of rotational symmetry in the large-scale structure in this study and that the structure is well described by the first four azimuthal Fourier modes. Two different large-scale organizations are observed during the duration of the simulation and these patterns are dominated spatially and energetically by azimuthal Fourier modes with frequencies of 2 and 3. Studies of the transition between these two large-scale patterns, radial and vertical variations in the azimuthal energy spectra, as well as the spatial and modal variations in the system's correlation time are conducted. Rotational dynamics are observed for individual Fourier modes and the global structure with strong similarities to the dynamics that have been reported for unit aspect-ratio domains in prior works. It is shown that the large-scale structures have very long correlation time scales, on the order of hundreds to thousands of free-fall time units, and that they are the primary source for a horizontal inhomogeneity within the system that can be observed during a finite, but a very long-time simulation or experiment.

42 ENGINEERING↗
DOE OSTI2023

Formation of active sites on transition metals through reaction-driven migration of surface atoms

Adopting low-index single-crystal surfaces as models for metal nanoparticle catalysts has been questioned by the experimental findings of adsorbate-induced formation of subnanometer clusters on several single-crystal surfaces. Here we used density functional theory calculations to elucidate the conditions that lead to cluster formation and show how adatom formation energies enable efficient screening of the conditions required for adsorbate-induced cluster formation. We studied a combination of eight face-centered cubic transition metals and 18 common surface intermediates and identified systems relevant to catalytic reactions, such as carbon monoxide (CO) oxidation and ammonia (NH 3 ) oxidation. We used kinetic Monte Carlo simulations to elucidate the CO-induced cluster formation process on a copper surface. Scanning tunneling microscopy of CO on a nickel (111) surface that contains steps and dislocations points to the structure sensitivity of this phenomenon. Metal-metal bond breaking that leads to the evolution of catalyst structures under realistic reaction conditions occurs much more broadly than previously thought.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

TRACER-Coastal Urban Boundary-Layer Interactions with Convection (TRACER-CUBIC) Field Campaign Report

To better understand the complicated web of processes governing convective cloud life cycle and aerosol-convection interactions, the U.S. Department of Energy (DOE)’s Atmospheric Radiation Measurement (ARM) user facility supported deployment of a variety of advanced atmospheric measurement systems to the greater Houston, Texas, area from 1 October 2021 to 30 September 2022 as part of the Tracking Aerosol Convection Interactions Experiment (TRACER). Houston was selected as a study area because isolated convection and a variety of aerosol conditions are common in this region. This one-year ARM Mobile Facility (AMF) deployment featured a four-month intensive operational period (IOP) during summer 2022 (1 June–30 September). The ARM instrumentation was deployed at three sites along an east-west transect from La Porte, Texas to an ancillary site in a less-polluted rural region southwest of downtown Houston (Figure 1). At the La Porte Site, which is located near the Houston ship channel in an area that experiences significant pollution, the first ARM Mobile Facility (AMF1) was deployed. During the IOP, the ARM tethered balloon system (TBS) operated at the ancillary site. The second-generation C-Band Scanning ARM Precipitation Radar (CSAPR) operated near Pearland, Texas, roughly halfway between the Laporte and ancillary sites. As part of the TRACER- Coastal Urban Boundary-Layer Interactions with Convection (CUBIC) project, three boundary-layer profiling systems) were deployed along a north-south transect spanning from the University of Houston Coastal Center to the Aldine site north of downtown Houston (also blue dot in Figure 1) during the TRACER IOP. These systems included the National Oceanic and Atmospheric Administration (NOAA) National Severe Storms Laboratory CLAMPS2 (C2), which was deployed at the UHCC, the University of Wisconsin SPARC, which was deployed at the ARM CSAPR site near Pearland (orange diamond in middle of map in Figure 1), and the University of Oklahoma CLAMPS1 (C1), which was deployed at Aldine. These three systems have been successfully operated in various field campaigns, providing data sets that collectively offer new insights into atmospheric-boundary-layer (ABL) processes, sea-breeze (SB) circulations, and convection initiation (CI). For the TRACER IOP window, these systems ran continuously between 1 June and 26 September, 2022. Due to commitments to NOAA projects, the Doppler lidar at the UHCC site was not available until 24 June 2022. The CLAMPS and SPARC profiling systems are self-contained platforms that have benefited from several years of development and deployment. Instruments and data processing were maintained remotely, which made the 4-month deployment for the TRACER-CUBIC IOP period possible. The same basic instrument configuration comprises each system: a scanning Doppler wind lidar for flow characterization and passive profiler(s) for characterizing planetary-boundary-layer (PBL) thermodynamic properties. Each platform includes a Halo Streamline Doppler wind lidar, an Atmospheric Emitted Radiance Interferometer (AERI), and a surface meteorology station. CLAMPS1 and CLAMPS2 each also include a microwave radiometer (MWR, Figure 1d). The TRACER-CUBIC hypotheses included (i) Interactions of SB and urban circulations and how they affect the PBL structure in the Houston environment, causing spatially (horizontally and vertically) and temporally highly variable flow patterns, (ii) heat, moisture, and aerosol transport and mixing depend on these flow dynamics, and (iii) an improved understanding of the flow patterns and PBL structure are critical for investigating the processes leading to CI. To test these hypotheses, the project aimed at (i) characterizing SB circulations and their impacts on the diurnal evolution of the structure of the ABL, (ii) studying the evolution of Houston’s complex urban boundary layer, and (iii) identifying effects of urban-induced circulations on pre-convective environments. TRACER-CUBIC observations generally provide good coverage during the summer IOP. Initial screening of the data indicates a good number of cases with bay-breeze (BB) and/or SB signatures, local CI, and interesting boundary-layer features such as strong nocturnal low-level jets (LLJs, Table 1). The numbers listed in rows 3-5 in this table will be further updated as part of ongoing in-depth analyses and systematic identification of local circulations and CI events. More detailed information about the data availability and quality for each instrument is provided in the “readme” files that were submitted to the ARM Data Center along with each archived data sets. These “readme” files also provide instrument descriptions, information about the data collection and processing procedures, data formats, and any additional information relevant for further data analysis.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1988

Space Science in the Twenty-First Century: Imperatives for the Decades 1995 to 2015

A unified program is outlined for studying the Earth, from its deep interior to its fluid envelopes. A system is proposed for measuring devices involving both space-based and in-situ observations that can accommodate simultaneously a large range of scientific needs. The scientific objectices served by this integrated infrastructure are cased into a framework of four grand themes. In summary these are: to determine the composition, structure, dynamics, and evolution of the Earth's crust and deeper interior; to establish and understand the structure, dynamics, and chemistry of the oceans, atmosphere, and cryosphere, and their interaction with the solid Earth; to characterize the history and dynamics of living organisms and their interaction with the environment; and to monitor and understand the interaction of human activities with the natural environment. A focus on these grand themes will help to understand the origin and fate of the planet, and to place it in the context of the solar system.

Source record↗