Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Accessing (Ba 1-x Sr x )Al 2 Si 2 O 8 :Eu Phosphors for Solid State White Lighting via Microwave-assisted Preparation: Tuning Emission Color by Coordination Environment

The preparation of Eu 2+ -substituted barium aluminum silicates is achieved using a rapid microwave-assisted preparation. The phase evolution of two BaAl 2 Si 2 O 8 :Eu 2+ polymorphs, the higher temperature hexagonal phase (hexacelsian), and the lower temperature monoclinic phase (celsian), is explored by varying the ramp time and soak time. This preparation method significantly reduces the reaction time needed to form these phases compared to conventional solid state routes. The luminescent properties of the two phases are identified under UV excitation with the hexagonal phase emitting in the UV region (λ em = 372 nm) and the monoclinic phase emitting in the blue region (λ em = 438 nm). The differences in optical properties of the two polymorphs are correlated to the coordination number and arrangement of the alkali earth site. The optical properties of the monoclinic phase can be further tuned through the substitution of Sr 2+ , forming the solid solution (Ba 1–x Sr x )Al 2 Si 2 O 8 :Eu 2+ . Changes in the crystal structure due to Sr 2+ substitution produce a surprising blue-shift in the emission spectrum, which is explained by a greater dispersion of bond lengths in the (Ba/Sr)–O polyhedra. The entire monoclinic solid solution exhibits excellent quantum yields of nearly 90 %, owing to the structural rigidity provided by the highly connected tetrahedral network.

Brgoch, Jakoah↗

Evidence of ordering in Cu-Ni alloys from experimental electronic entropy measurements

Phase diagrams exhibiting extended solid-solution and lenslike melting are often reproduced using ideal solutions, where ideal mixing considers a fully random configurational entropy of mixing. In the field of irreversible thermodynamics, experimental measurements of the composition variation of high-temperature electronic transport and molten-state properties suggest, however, a strong role for short-range atomic ordering in these systems. Herein, measurements of the thermopower and resistivity are reported for Cu-Ni solid solutions as a function of temperature and composition. The electronic transport properties were interpreted with an irreversible thermodynamic framework, revealing a large electronic contribution to the entropy of mixing. By considering a cluster model for the configurational entropy that uses the electronic contribution to inform the existence of ordered associates, we rationalize such a contribution of the electronic entropy with the ideal entropy of mixing commonly used to model such systems. In conclusion, these results suggest that the short-range order of the atoms plays a significant role in both solid and liquid states, even when there are no dominant intermetallic compounds in these alloys.

36 MATERIALS SCIENCE↗

Seebeck and Figure of Merit Enhancement by Rare Earth Doping in Yb14-xRExZnSb11 (x = 0.5)

Yb14ZnSb11 has been of interest for its intermediate valency and possible Kondo designation. It is one of the few transition metal compounds of the Ca14AlSb11 structure type that show metallic behavior. While the solid solution of Yb14Mn1-xZnxSb11 shows an improvement in the high temperature figure of merit of about 10% over Yb14MnSb11, there has been no investigation of optimization of the Zn containing phase. In an effort to expand the possible high temperature p-type thermoelectric materials with this structure type, the rare earth (RE) containing solid solution Yb14-xRExZnSb11 (RE = Y, La) was investigated. The substitution of a small amount of 3+ rare earth (RE) for Yb2+ was employed as a means of optimizing Yb14MnSb11 for use as a thermoelectric material. Yb14ZnSb11 is considered an intermediate valence Kondo system where some percentage of the Yb is formally 3+ and undergoes a reduction to 2+ at ~85 K. The substitution of a 3+ RE element could either replace the Yb3+ or add to the total amount of 3+ RE and provides changes to the electronic states. RE = Y, La were chosen as they represent the two extremes in size as substitutions for Yb: a similar and much larger size RE, respectively, compared with Yb3+. The composition x = 0.5 was chosen as that is the typical amount of RE element that can be substituted into Yb14MnSb11. These two new RE containing compositions show a significant improvement in Seebeck while decreasing thermal conductivity. The addition of RE increases the melting point of Yb14ZnSb11 so that the transport data from 300 K to 1275 K can be collected. The figure of merit is increased five times over that of Yb14ZnSb11 and provides a zT ~0.7 at 1275 K.

Kunz Wille, Elizabeth L. (ORCID:0000000228062663)↗

Two modes of screw dislocation glide in fcc single-phase concentrated alloys

Concentrated solid solution alloys (CSSAs), including medium- and high-entropy alloys, are currently being considered as prospective materials in many applications. The behavior of CSSAs under different conditions, including mechanical loading, differs from that of conventional alloys and has been the subject of intensive study by different techniques. In many cases, their behavior is treated by modifying solid solution hardening models, which, in principle, does not reflect many important features of CSSAs where the distinction between solute and solvent atoms is not clear. In this work, we report the results of an atomic-scale study of ½<110>{111} screw dislocation motion in an fcc equiatomic Ni-Fe alloy. Molecular dynamics simulations demonstrate that the dislocation has two distinctive modes for glide. At lower stress, dislocations move in a very rough manner that cannot be described as continuous glide but rather as jerky motion through a set of obstacles. At high stress, they glide in a manner similar to lattice friction-controlled conditions in single component systems. The stress for the transition between modes depends on the dislocation segment length and temperature. As a result, at 300 K, the flow stress saturates at ~130 MPa for lengths above ~140 |b| (b is the Burgers vector).

36 MATERIALS SCIENCE↗

Rare-earth high entropy alloys with hexagonal close-packed structure

The formation of octonary DyErGdHoLuScTbY and senary DyGdHoLaTbY and ErGdHoLaTbY high-entropy alloys (HEAs) with the hexagonal close-packed (HCP) structure was reported in this study. Experiments using scanning electron microscopy and x-ray diffraction confirmed the single HCP solid solution in the as-cast state for these three HEAs if the presence of minor rare-earth oxides due to contamination from processing is ignored. The measured compressive yield stress values for these HEAs at room temperature are 245, 205, and 360 MPa for the ErGdHoLaTbY, DyGdHoLaTbY, and DyErGdHoLuScTbY HEAs, respectively. As a result, the corresponding solid solution strengthening contributions for these HEAs were estimated using a simple elastic model, and the resulting contributions were 28 MPa, 27 MPa, and 42 MPa for the three aforementioned HEAs.

36 MATERIALS SCIENCE↗

Revisiting the SGTE lattice stability of bcc aluminum

The CALPHAD framework rests on the ability to assign well-defined free energies to all phases, including mechanically unstable ones. Given the experimental difficulties associated with the latter, researchers have turned to computational methods to obtain a theoretically justified definition of the free energy of mechanically unstable phases. Recently, a method called “inflection detection” has been shown to yield free energies that are broadly consistent with the current SGTE (Scientific Group Thermodata Europe) standard for pure elements, which were obtained through an extrapolation of stable solid solutions free energies towards unstable end members. Despite this general agreement, apparent failures for a few elements stand out, notably for the bcc–fcc enthalpy difference for the common element Al. Furthermore we revisit the definition of the bcc Al enthalpy and show that a careful CALPHAD-based analysis of enthalpy trends in five different mechanically stable binary solid solutions in fact does agree very well with the inflection-detection approach.

36 MATERIALS SCIENCE↗

Stabilization of Polar Nanoregions in Pb-free Ferroelectrics

In this study, the formation of polar nanoregions through solid-solution additions is known to enhance significantly the functional properties of ferroelectric materials. Despite considerable progress in characterizing the microscopic behavior of polar nanoregions (PNR), understanding their real-space atomic structure and dynamics of their formation remains a considerable challenge. Here, using the method of dynamic pair distribution function, we provide direct insights into the role of solid-solution additions towards the stabilization of polar nanoregions in the Pb-free ferroelectric of Ba(Zr,Ti)O 3 . It is shown that for an optimum level of substitution of Ti by larger Zr ions, the dynamics of atomic displacements for ferroelectric polarization are slowed sufficiently below THz frequencies, which leads to increased local correlation among dipoles within PNRs. The dynamic pair distribution function technique demonstrates a unique capability to obtain insights into locally correlated atomic dynamics in disordered materials, including new Pb-free ferroelectrics, which is necessary to understand and control their functional properties.

36 MATERIALS SCIENCE↗

Wetting Behavior of Calcium Ferrite Slags on Cristobalite Substrates

Calcium ferrite (CF) is a significant intermediate adhesive phase in high-basicity sinters. The wettability between calcium ferrite (CF) and gangue plays an important role in the assimilation process. The wettability of CF-based slags, in which a constant amount (2 mass pct.) of Al{sub 2}O{sub 3}, MgO, SiO{sub 2}, and TiO{sub 2} was added, on solid SiO{sub 2} (cristobalite) substrates at 1523 K (1250 °C) was investigated. The interfacial microstructure and spreading mechanisms were discussed for each sample. All the tested slag samples exhibited good wettability on the SiO{sub 2} substrate. The initial apparent contact angles were in the range of 20 to 50 deg, while the final apparent contact angles were ~ 5 deg. The wetting process could be divided into three stages on the basis of the change in diameter, namely the “linear spreading” stage, “spreading rate reduction” stage, and “wetting equilibrium” stage. It was found that the CF-SiO{sub 2} wetting system exhibits dissolutive wetting and the dissolution of SiO{sub 2} into slag influences its spreading process. The spreading rate increases with a decrease in the ratio of viscosity to interfacial tension, which is a result of the addition of Al{sub 2}O{sub 3}, MgO, SiO{sub 2}, and TiO{sub 2}. After cooling, a deep corrosion pit was formed in the substrate and a diffusion layer was generated in front of the residual slag zone; further, some SiO{sub 2} and Fe{sub 2}O{sub 3} solid solutions precipitated in the slag.

36 MATERIALS SCIENCE↗

A combined calorimetric and computational study of the energetics of rare earth substituted UO 2 systems

The energetics of rare earth substituted UO 2 solid solutions (U 1-x Ln x O 2-0.5x+y , where Ln = La, Y, and Nd) are explored employing a combination of calorimetric measurements and density functional theory based computations. Calculated and measured formation enthalpies agree within 10 kJ/mol for stoichiometric oxygen/metal compositions. To better understand the factors governing the stability and defect binding in rare earth substituted urania solid solutions, systematic trends in the energetics are investigated based on the present results and previous computational and experimental thermochemical studies of rare earth substituted fluorite oxides (A 1-x Ln x O 2-0.5x , where A = Hf, Zr, Ce, and Th). A consistent trend towards increased energetic stability with larger size mismatch between the smaller host tetravalent cation and the larger rare earth trivalent cation is found for both actinide and non-actinide fluorite oxide systems where aliovalent substitution of Ln cations is compensated by oxygen vacancies. Yet, the large exothermic oxidation enthalpy in the UO 2 based systems favors oxygen rich compositions where charge compensation occurs through the formation of uranium cations with higher oxidation states.

36 MATERIALS SCIENCE↗

Structural and spectroscopic properties of high temperature prepared ZrO₂–TiO₂ mixed oxides

ZrO₂-TiO₂ mixed oxides of various composition, with the molar fraction of TiO₂ ranging from 0.1% to 15%, have been prepared via sol-gel synthesis and then calcined at 1273 K to check both their thermal stability and physicochemical properties. These solids are usually employed in photocatalytic processes and as active phase supports in heterogeneous catalysis. As indicated by X-ray diffraction and Raman spectroscopy, solid solutions based on Ti ions diluted in the ZrO₂ matrix are formed in the whole range of Ti molar fraction examined. Materials with low Ti loading (0.1%–1%) are basically constituted by the monoclinic phase of ZrO₂ while the tetragonal phase becomes prevalent at 15% of TiO₂ molar fraction. The presence of Ti ions modify the electronic structure of the solid as revealed by investigation of the optical properties. The typical band gap transition of ZrO₂ undergoes, in fact, a red shift roughly proportional to the Ti loading which reach the remarkable value of 1.6 eV for the sample with 10% of molar Ti concentration. Comparing chemical analysis of the solids with XPS data it has been put into evidence that the titanium ions distribution into the solid is not uniform and the concentration of Ti⁴⁺ tend to be higher in subsurface layers than in the crystal bulk. The introduction of titanium ions in the structure increases the reducibility of the solid. Annealing under vacuum at various temperatures causes oxygen depletion with consequent reduction of the solid which shows up mainly in terms of formation of Ti³⁺ reduced centres which are characterized by a typical EPR signal. Ti³⁺ defects forms, as also forecast by theoretical modelling of the solid, as their energy is lower than that of other possible reduced defective centers. The reduced solids are able to transfer electrons to adsorbed oxygen molecules in mild condition resulting in the formation of surface superoxide anions (O₂⁻) which are stabilized on surface Zr⁴⁺ or, alternatively, on Ti⁴⁺ ions according to the sample composition. - Graphical abstract: The presence of Ti in ZrO₂ modifies UV–vis and electronic properties of mixed oxides. Highlights: • ZrO₂–TiO₂ mixed oxides have been prepared via sol–gel synthesis. • Solids with low Ti loading are constituted by the monoclinic phase of ZrO₂. • The presence of Ti ions modify the electronic structure of the solid. • The introduction of titanium ions increases the reducibility of the solid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Order-disorder phase transformations in quaternary pyrochlore oxide system: Investigated by X-ray diffraction, transmission electron microscopy and Raman spectroscopic techniques

Order-disorder transformations in a quaternary pyrochlore oxide system, Ca-Y-Zr-Ta-O, were studied by powder X-ray diffraction (XRD) method, transmission electron microscope (TEM) and FT-NIR Raman spectroscopic techniques. The solid solutions in different ratios, 4:1, 2:1, 1:1, 1:2, 1:4, 1:6, of CaTaO{sub 3.5} and YZrO{sub 3.5} were prepared by the conventional high temperature ceramic route. The XRD results and Rietveld analysis revealed that the crystal structure changed from an ordered pyrochlore structure to a disordered defect fluorite structure as the ratios of the solid solutions of CaTaO{sub 3.5} and YZrO{sub 3.5} were changed from 4:1 to 1:4. This structural transformation in the present system is attributed to the lowering of the average cation radius ratio, r{sub A}/r{sub B} as a result of progressive and simultaneous substitution of larger cation Ca{sup 2+} for Y{sup 3+} at A sites and smaller cation Ta{sup 5+} for Zr{sup 4+} at B sites. Raman spectroscopy and TEM analysis corroborated the XRD results. - Graphical abstract: Selected area electron diffraction (SAED) patterns showed highly ordered diffraction maxima with characteristic superlattice weak diffraction spots of the pyrochlore structure for (a) Ca{sub 0.6}7Y{sub 1.33}Zr{sub 1.33}Ta{sub 0.33}O{sub 7} (C2YZT2) and bright diffraction maxima arranged in a ring pattern of the fluorite structure for (b) Ca{sub 0.29}7Y{sub 1.71}Zr{sub 1.71}Ta{sub 0.29}O{sub 7} (CY6Z6T).

36 MATERIALS SCIENCE↗

Phonon scattering mechanisms dictating the thermal conductivity of lead zirconate titanate (PbZr 1- x Ti x O 3 ) thin films across the compositional phase diagram

This paper represents a thorough investigation of the thermal conductivity (κ) in both thin film and bulk PbZr 1–x Ti x O 3 (PZT) across the compositional phase diagram. Given the technological importance of PZT as a superb piezoelectric and ferroelectric material in devices and systems impacting a wide array of industries, this research serves to fill the gap in knowledge regarding the thermal properties. The thermal conductivities of both thin film and bulk PZT are found to vary by a considerable margin as a function of composition x. Additionally, we observe a discontinuity in κ in the vicinity of the morphotropic phase boundary (MPB, x = 0.48) where there is a 20%–25% decrease in κ in our thin film data, similar to that found in literature data for bulk PZT. The comparison between bulk and thin film materials highlights the sensitivity of κ to size effects such as film thickness and grain size even in disordered alloy/solid-solution materials. A model for the thermal conductivity of PZT as a function of composition (κ(x)) is presented, which enables the application of the virtual crystal approximation for alloy-type material systems with very different crystals structures, resulting in differing temperature trends for κ. We show that in the case of crystalline solid-solutions where the thermal conductivity of one of the parent materials exhibits glass-like temperature trends the compositional dependence of thermal conductivity is relatively constant for most values of x. Finally, this is in stark contrast with the typical trends of thermal conductivity with x in alloys, where the thermal conductivity increases dramatically as the composition of the alloy or solid-solution approaches that of a pure parent materials (i.e., as x = 0 or 1).

36 MATERIALS SCIENCE↗

Tunable Optical Properties and Increased Thermal Quenching in the Blue-Emitting Phosphor Series: Ba 2 (Y 1– x Lu x ) 5 B 5 O 17 :Ce 3+ ( x = 0–1)

The preparation of cerium-substituted barium lutetium borate, Ba2Lu5B5O17:Ce3+, is achieved using high temperature solid state synthesis. This compound crystallizes in the Ba2Y5B5O17-type structure and shows an efficient blue emission (λmax = 447 nm) when excited by UV-light (λex = 340 nm) with a photoluminescent quantum yield near 90%, a fast luminescence decay time (<40 ns), and a thermal quenching temperature of 452 K. Further, preparing a solid solution following Ba2(Y1–xLux)5B5O17:Ce3+ (x = 0, 0.25, 0.50, 0.75, 1) confirms that all compounds are isostructural and follow Vegard’s law. Substituting Y3+ for Lu3+ yields a nearly constant emission spectrum that blue-shifts by only 9 nm and has a consistent luminescence lifetime across the range prepared. The photoluminescent quantum yield (PLQY) and thermal quenching (T50) of the solid solution, however, are dramatically impacted by the composition, with the PLQY decreasing to ≈70% and the T50 dropping 49 K going from x = 1 to x = 0. These significant changes in the optical properties likely stem from enhanced structural rigidity as the larger, more polarizable Y3+ is substituted for the smaller, harder Lu3+ cation. These results highlight the importance of optimizing chemical bonding to improve a phosphor’s optical properties.

36 MATERIALS SCIENCE↗

Compressional behavior and spin state of δ-(Al,Fe)OOH at high pressures

Hydrogen transport from the surface to the deep interior and distribution in the mantle are important in the evolution and dynamics of the Earth. An aluminum oxy-hydroxide, δ-AlOOH, might influence hydrogen transport in the deep mantle because of its high stability extending to lower mantle conditions. The compressional behavior and spin states of δ-(Al,Fe 3+ )OOH phases were investigated with synchrotron X-ray diffraction and Mössbauer spectroscopy under high pressure and room temperature. Pressure-volume (P-V) profiles of the δ-(Al 0.908(9) 57 Fe 0.045(1) )OOH 1.14(3) [Fe/(Al+Fe) = 0.047(10), δ-Fe5] and the δ-(Al 0.832(5) 57 Fe 0.117(1) )OOH 1.15(3) [Fe/(Al+Fe) = 0.123(2), δ-Fe12] show that these hydrous phases undergo two distinct structural transitions involving changes in hydrogen bonding environments and a high- to low-spin crossover in Fe 3+ . A change of axial compressibility accompanied by a transition from an ordered ( P 2 1 nm ) to disordered hydrogen bond ( Pnnm ) occurs near 10 GPa for both δ-Fe5 and δ-Fe12 samples. Through this transition, the crystallographic a and b axes become stiffer, whereas the c axis does not show such a change, as observed in pure δ-AlOOH. A volume collapse due to a transition from high- to low-spin states in the Fe 3+ ions is complete below 32–40 GPa in δ-Fe5 and δ-Fe12, which i ~10 GPa lower than that reported for pure ε-FeOOH. Evaluation of the Mössbauer spectra of δ-(Al 0.824(10) 57 Fe 0.126(4) )OOH 1.15(4) [Fe/(Al+Fe) = 0.133(3), δ-Fe13] also indicate a spin transition between 32–45 GPa. Phases in the δ-(Al,Fe)OOH solid solution with similar iron concentrations as those studied here could cause an anomalously high ρ/ν Φ ratio (bulk sound velocity, defined as √K/ρ at depths corresponding to the spin crossover region (~900 to ~1000 km depth), whereas outside the spin crossover region a low ρ/ν Φ anomaly would be expected. Here, these results suggest that the δ-(Al,Fe)OOH solid solution may play an important role in understanding the heterogeneous structure of the deep Earth.

58 GEOSCIENCES↗

Short-range order and its impact on the CrCoNi medium-entropy alloy

Traditional metallic alloys are mixtures of elements in which the atoms of minority species tend to be distributed randomly if they are below their solubility limit, or to form secondary phases if they are above it. The concept of multiple-principal-element alloys has recently expanded this view, as these materials are single-phase solid solutions of generally equiatomic mixtures of metallic elements. This group of materials has received much interest owing to their enhanced mechanical properties 1,2,3,4,5 . They are usually called medium-entropy alloys in ternary systems and high-entropy alloys in quaternary or quinary systems, alluding to their high degree of configurational entropy. However, the question has remained as to how random these solid solutions actually are, with the influence of short-range order being suggested in computational simulations but not seen experimentally 6,7 . In this paper we report the observation, using energy-filtered transmission electron microscopy, of structural features attributable to short-range order in the CrCoNi medium-entropy alloy. Increasing amounts of such order give rise to both higher stacking-fault energy and hardness. These findings suggest that the degree of local ordering at the nanometre scale can be tailored through thermomechanical processing, providing a new avenue for tuning the mechanical properties of medium- and high-entropy alloys.

36 MATERIALS SCIENCE↗

Phase stability and elastic properties of Cr-V alloys

V is the only element in the periodic table that forms a complete solid solution with Cr and thus is particularly important in alloying strategy to ductilize Cr. This study combines first-principles density functional theory calculations and experiments to investigate the phase stability and elastic properties of Cr–V binary alloys. The cluster expansion study reveals the formation of various ordered compounds at low temperatures that were not previously known. These compounds become unstable due to the configurational entropy of bcc solid solution as the temperature is increased. The elastic constants of ordered and disordered compounds are calculated at both T = 0 K and finite temperatures. The overall trends in elastic properties are in agreement with measurements using the resonant ultrasound spectroscopy method. The calculations predict that addition of V to Cr decreases both the bulk modulus and the shear modulus, and enhances the Poisson’s ratio, in agreement with experiments. Decrease in the bulk modulus is correlated to decrease in the valence electron density and increase in the lattice constant. An enhanced Poisson’s ratio for bcc Cr–V alloys (compared to pure Cr) is associated with an increased density of states at the Fermi level. Furthermore, the difference charge density in the bonding region in the (110) slip plane is highest for pure Cr and decreases gradually as V is added. The present calculation also predicts a negative Cauchy pressure for pure Cr, and it becomes positive upon alloying with V. The intrinsic ductilizing effect from V may contribute, at least partially, to the experimentally observed ductilizing phenomenon in the literature.

36 MATERIALS SCIENCE↗

First-principles insights into chromium-induced oxide phases in NiO

The high-temperature oxidation of Ni–Cr alloys leads to complex oxide scales comprising Ni(Cr)O solid solutions, NiCr 2 O 4 spinel, and Cr 2 O 3 corundum within the NiO matrix. Understanding the atomic-scale mechanisms of Cr segregation and precipitate formation is crucial for enhancing oxidation resistance. Here, we employ density functional theory calculations to investigate Cr behavior on NiO(100), (110), and (111) surfaces and in the bulk. Our results reveal that isolated Cr atoms preferentially segregate to the surfaces, stabilizing Ni(Cr)O solid solutions via strong Cr–O bonding, whereas Cr pairs and clusters favor subsurface migration and bulk aggregation, promoting nucleation of NiCr 2 O 4 and Cr 2 O 3 phases. These findings elucidate a size-dependent segregation mechanism linking Cr coordination environments to oxide phase evolution. This atomic-scale insight informs strategies to tailor oxide microstructures and enhance the high-temperature oxidation resistance of Ni–Cr alloys.

Chromium Segregation↗

On the P2-Na x Co 1– y (Mn 2/3 Ni 1/3 ) y O 2 Cathode Materials for Sodium-Ion Batteries: Synthesis, Electrochemical Performance, and Redox Processes Occurring during the Electrochemical Cycling

P2-type NaMO 2 sodiated layered oxides with mixed transition metals are receiving considerable attention for use as cathodes in sodium-ion batteries. A study on solid solution (1 – y)P2-Na x CoO 2 –( y )P2-Na x Mn 2/3 Ni 1/3 O 2 ( y = 0, 1/3, 1/2, 2/3, 1) reveals that changing the composition of the transition metals affects the resulting structure and the stability of pure P2 phases at various temperatures of calcination. For 0 ≤ y ≤ 1.0, the P2-Na x Co (1– y ) Mn 2 y /3 Ni y /3 O 2 solid-solution compounds deliver good electrochemical performance when cycled between 2.0 and 4.2 V versus Na + /Na with improved capacity stability in long-term cycling, especially for electrode materials with lower Co content ( y = 1/2 and 2/3), despite lower discharge capacities being observed. The (1/2)P2-Na x CoO 2 –(1/2)P2-Na x Mn 2/3 Ni 1/3 O 2 composition delivers a discharge capacity of 101.04 mAh g –1 with a capacity loss of only 3% after 100 cycles and a Coulombic efficiency exceeding 99.2%. Cycling this material to a higher cutoff voltage of 4.5 V versus Na + /Na increases the specific discharge capacity to ≈140 mAh g –1 due to the appearance of a well-defined high-voltage plateau, but after only 20 cycles, capacity retention declines to 88% and Coulombic efficiency drops to around 97%. In situ X-ray absorption near-edge structure measurements conducted on composition Na x Co 1/2 Mn 1/3 Ni 1/6 O 2 ( y = 1/2) in the two potential windows studied help elucidate the operating potential of each transition metal redox couple. As a result, it also reveals that at the high-voltage plateau, all of the transition metals are stable, raising the suspicion of possible contribution of oxygen ions in the high-voltage plateau.

25 ENERGY STORAGE↗