Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “redesign”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Structural analysis of the space shuttle solid rocket booster/external tank attach ring

An External Tank (ET) attach ring is used in the Space Shuttle System to transfer lateral loads between the ET and the Solid Rocket Booster (SRB). Following the Challenger (51-L) accident, the flight performance of the ET attach ring was reviewed, and negative margins of safety and failed bolts in the attach ring were subsequently identified. The analyses described in this report were performed in order to understand the existing ET attach ring structural response to motor case internal pressurization as well as to aid in an ET attach ring redesign effort undertaken by NASA LaRC. The finite element model as well as the results from linear and nonlinear static structural analyses are described.

Dorsey, John T.↗

It's time to reinvent the general aviation airplane

Current designs for general aviation airplanes have become obsolete, and avenues for major redesign must be considered. New designs should incorporate recent advances in electronics, aerodynamics, structures, materials, and propulsion. Future airplanes should be optimized to operate satisfactorily in a positive air traffic control environment, to afford safety and comfort for point-to-point transportation, and to take advantage of automated manufacturing techniques and high production rates. These requirements have broad implications for airplane design and flying qualities, leading to a concept for the Modern Equipment General Aviation (MEGA) airplane. Synergistic improvements in design, production, and operation can provide a much needed fresh start for the general aviation industry and the traveling public. In this investigation a small four place airplane is taken as the reference, although the proposed philosophy applies across the entire spectrum of general aviation.

Stengel, Robert F.↗

Kinematics of Hooke universal joint robot wrists

The singularity problem associated with wrist mechanisms commonly found on industrial manipulators can be alleviated by redesigning the wrist so that it functions as a three-axis gimbal system. This paper discussess the kinematics of gimbal robot wrists made of one and two Hooke universal joints. Derivations of the resolved rate motion control equations for the single and double Hooke universal joint wrists are presented using the three-axis gimbal system as a theoretical wrist model.

Mckinney, William S., Jr.↗

Assembly Test Article (ATA)

The assembly test article (ATA) consisted of two live loaded redesigned solid rocket motor (RSRM) segments which were assembled and disassembled to simulate the actual flight segment stacking process. The test assembly joint was flight RSRM design, which included the J-joint insulation design and metal capture feature. The ATA test was performed mid-November through 24 December 1987, at Kennedy Space Center (KSC), Florida. The purpose of the test was: certification that vertical RSRM segment mating and separation could be accomplished without any damage; verification and modification of the procedures in the segment stacking/destacking documents; and certification of various GSE to be used for flight assembly and inspection. The RSRM vertical segment assembly/disassembly is possible without any damage to the insulation, metal parts, or seals. The insulation J-joint contact area was very close to the predicted values. Numerous deviations and changes to the planning documents were made to ensure the flight segments are effectively and correctly stacked. Various GSE were also certified for use on flight segments, and are discussed in detail.

Ricks, Glen A.↗

An 8.4-GHz dual maser front end for Parkes reimplementation

An 8.4 GHz front-end system consisting of a feedhorn, a waveguide feed assembly, dual masers, and downconverters is being reimplemented at Parkes as part of the Parkes-Canberra Telemetry Array for the Voyager Neptune encounter. The front-end system was originally assembled by the European Space Agency on the Parkes antenna for the Giotto project. It was also used on a time-sharing basis by the DSN as part of the Parkes-Canberra Telemetry Array to enhance the data return from Voyager 2 at Uranus. At the conclusion of these projects in 1986, the front-end system was dismantled, packed, and shipped to Europe. Part of the system was then shipped to JPL on loan for reimplementation at Parkes for the Voyager Neptune encounter. The system is being redesigned and refurbished for operation at Parkes. Tasks include new microwave front-end control cabinets, a closed-cycle refrigeration data acquisition system, a new noise-adding radiometer system, a front-end controller assembly, and refurbishment of the dual 8.4 GHz traveling-wave masers (TWMs) and waveguide feed system.

Trowbridge, D. L.↗

Achieving real-time performance in FIESTA

The Fault Isolation Expert System for TDRSS Applications (FIESTA) is targeted for operation in a real-time online environment. Initial stages of the prototype development concentrated on acquisition and representation of the knowledge necessary to isolate faults in the TDRSS Network. Recent efforts focused on achieving real-time performance including: a discussion of the meaning of FIESTA real-time requirements, determination of performance levels (benchmarking) and techniques for optimization. Optimization techniques presented include redesign of critical relations, filtering of redundant data and optimization of patterns used in rules. Results are summarized.

Wilkinson, William↗

Launch Processing System operations with a future look to Operations Analyst (OPERA)

The Launch Processing System architecture and the ground support operations required to provide Shuttle System engineers with the capability to safely process and launch an Orbiter are described. The described ground operations are the culmination of eleven years of experience and redesign. Some of the 'lessons learned' are examined, and problem areas which ground support operations have identified over the years as the Shuttle and Launch Processing Systems continue to grow in complexity are discussed. The Operational Analyst for Distributed Systems (OPERA), a proposed set of expert systems for the Launch Processing System Operational assistance, is discussed along with its extensions to prospective future configurations and components for the Launch Processing System.

Heard, Astrid E.↗

U.S. Space Shuttle Solid Rocket Booster - Return to flight

The Space Shuttle Solid Rocket Booster (SRB) redesign program instituted in the wake of the Challenger accident encompassed a design requirements review, a failure modes effect analysis/critical items list determination, a hazards analysis, an operational maintenance and requirements specification study, the definition of operational maintenance instructions and launch commit criteria, and design certification and flight readiness reviews. Attention is presently given to the SRB's thrust vector control, separation, and recovery functions, as well as its electrical and instrumentation systems and its case assembly and hardware interfaces.

Coates, K. D.↗

A frequency-domain estimator for use in adaptive control systems

The paper presents a frequency-domain estimator which can identify both a nominal model of a plant as well as a frequency-domain bounding function on the modeling error associated with this nominal model. This estimator, which is called a robust estimator, can be used in conjunction with a robust control-law redesign algorithm to form a robust adaptive controller.

Lamaire, Richard O.↗

CSCM Navier-Stokes thermal/aerodynamic analysis of hypersonic nozzle flows with slot injection and wall cooling

The Conservative Supra-Characteristic Method (CSCM) Navier-Stokes solver is applied to ascertain the problems inherent in the design of a nominal Mach 14 nozzle for NASA-Ames' 3.5-ft Hypersonic Wind Tunnel; attention is given to the effects of boundary layer cooling systems on the aerodynamic redesign of the nozzle throat region. Complete nozzle flowfields are calculated with and without slot injection of either hot or cold fluid into the boundary layer just upstream of the throat, as well as with alternatively adiabatic and cold walls. The CSCM method is capable of resolving subtle differences in the flows.

Codding, William H.↗

A new gravitational model for the earth from satellite tracking data - GEM-T1

A computation of a terrestrial gravitational field model called the Goddard Earth Model GEM-T1 is discussed and compared to previous models, including the GEM-L2. The software tools were redesigned for the model, allowing for the optimization of the technique of relative data weighting and model estimation used in GEM solutions. The GEM-T1 model provides a simultaneous solution for a gravity model in spherical harmonics complete to degree and order 36, a subset of 66 ocean tidal coefficients for the long-wavelength components of 12 major tides, and 5-day averaged earth rotation and polar motion parameters for the 1980 period on. GEM-T1 was derived from satellite tracking data acquired on 17 different satellites whose inclinations ranged from 15 degrees to polar. A simulation of the TOPEX/POSEIDON orbit using the covariances of the GEM-T1 model was made. Estimated radial error for the simulation was reduced to less than 30 cm rms.

Marsh, J. G.↗

Stress analysis and life prediction of gas turbine blade

A stress analysis procedure is presented for a redesign of the Space Shuttle Main Engine high pressure fuel turbopump turbine blades. The analysis consists of the one-dimensional scoping analysis to support the design layout and the follow-on three-dimensional finite element analysis to confirm the blade design at operating loading conditions. Blade life is evaluated based on high-cycle fatigue and low-cycle fatigue.

Hsiung, H. C.↗

Lightweight structural design of a bolted case joint for the Space Shuttle Solid Rocket Motor

This paper presents the structural design of a bolted joint with a static face seal which can be used to join Space Shuttle Solid Rocket Motor (SRM) case segments. Results from numerous finite element parametric studies indicate that the bolted joint meets the design requirement of preventing joint opening at the O-ring locations during SRM pressurization. A final design recommended for further development has the following parameters: 180 1-inch-diameter studs, stud center line offset of .5 inches radially inward from the shell wall center line, flange thickness of 0.75 inches, bearing plate thickness of 0.25 inches, studs prestressed to 70 percent of ultimate load, and the intermediate alcove. The design has a mass penalty of 1096 lbm, which is 164 lbm greater than the currently proposed capture tang redesign.

Dorsey, John T.↗

Automating the parallel processing of fluid and structural dynamics calculations

The NASA Lewis Research Center is actively involved in the development of expert system technology to assist users in applying parallel processing to computational fluid and structural dynamic analysis. The goal of this effort is to eliminate the necessity for the physical scientist to become a computer scientist in order to effectively use the computer as a research tool. Programming and operating software utilities have previously been developed to solve systems of ordinary nonlinear differential equations on parallel scalar processors. Current efforts are aimed at extending these capabilties to systems of partial differential equations, that describe the complex behavior of fluids and structures within aerospace propulsion systems. This paper presents some important considerations in the redesign, in particular, the need for algorithms and software utilities that can automatically identify data flow patterns in the application program and partition and allocate calculations to the parallel processors. A library-oriented multiprocessing concept for integrating the hardware and software functions is described.

Arpasi, Dale J.↗

Improving turbine blade fatigue life

Turbine airfoil design, materials, and cooling system management are variables which, when optimized, can contribute to longer turbine component lives. These advancements have been identified as redesign techniques to improve the turbine fatigue life of the SSME High Pressure Fuel Turbopump. This paper discusses the general program approach toward improving turbine fatigue life.

Buddenbohm, H. W.↗

Capabilities of the cosmic background explorer

The cosmic background explorer, now being redesigned for a launch on a Delta rocket in 1989, will carry three instruments to measure the cosmic infrared and microwave background radiation and other diffuse sources from 1 micron to 1 cm wavelength. These instruments will be orders of magnitude more sensitive and accurate than previous equipment and will help determine the structure of the early universe. The instruments are (1) an absolute spectrophotometer, covering 100 microns to 1 cm, (2) an absolute infrared radiometer covering 1 to 300 microns, and (3) differential microwave radiometers at 32, 53, and 90 GHz. They will measure the large scale anisotropy and the spectrum of the 3 K cosmic background, and search for the extragalactic infrared background, to a sensitivity limited by the astrophysical environment. The first two instruments require liquid helium cooling, limiting their lifetime to about 14 months.

Mather, J. C.↗

Galileo Earth-Venus trajectory correction maneuver design

As a result of delays in the Space Shuttle program and a re-evaluation of safety concerns which resulted in cancellation of the Shuttle Centaur Upper Stage program, the Galileo mission to Jupiter has undergone a substantial redesign effort. Use of the Inertial Upper Stage (IUS) for injection has necessitated a complicated Venus-Earth-Earth gravity assist trajectory in order to reach Jupiter. One flyby of Venus and two flybys of Earth are required to compensate for the lower injection energy available from the IUS. As the spacecraft was not originally designed for the environment within 1 AU of the Sun, modifications to the spacecraft and operating procedures have been developed. This paper describes some of these changes and how they have affected the design and implementation of trajectory correction maneuvers on the Earth-Venus leg of the mission. A strategy of biasing the IUS target at injection to control the statistical velocity distribution of a subsequent trajectory correction maneuver is discussed.

Wilson, M. G.↗

Polymeric Electrolytic Hygrometer For Harsh Environments

Design of polymeric electrolytic hygrometer improved to meet need for reliable measurements of relative humidity in harsh environments of pulpmills and papermills. Redesigned sensor head features shorter, more-rigidly-held sensing element, less vulnerable than previous version to swell and loss of electrical contact. Useful for control of batch dryers in food and pharmaceutical industries.

Lawson, Daniel D.↗