Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “polymer characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Benchmarking Bicontinuous Nanospheres against Polymersomes for in Vivo Biodistribution and Dual Intracellular Delivery of Lipophilic and Water-Soluble Payloads

Bicontinuous nanospheres (BCNs) are polymeric analogs to lipid cubosomes, possessing cubic liquid crystalline phases with high internal surface area, aqueous channels for loading hydrophilic molecules, and high hydrophobic volume for lipophilic payloads. Primarily due to difficulties in scalable and consistent fabrication, neither controlled delivery of payloads via BCNs nor their organ or cellular biodistributions following in vivo administration have been demonstrated or characterized. We have recently validated flash nanoprecipitation as a rapid method of assembling uniform monodisperse 200–300 nm diameter BCNs from poly(ethylene glycol)-$b$-poly(propylene sulfide) (PEG-$b$-PPS) co-polymers. In this work, we compare these BCNs both in vitro and in vivo to 100 nm PEG-$b$-PPS polymersomes (PSs), which have been well characterized as nanocarriers for controlled delivery applications. Using a small molecule fluorophore and a fluorescently tagged protein as respective lipophilic and water-soluble model cargos, we demonstrate that BCNs can achieve significantly higher encapsulation efficiencies for both payloads on a per unit mass basis. At time points of 4 and 24 h after intravenous administration to mice, we found significant differences in organ-level uptake between BCNs and PSs, with BCNs showing reduced accumulation in the liver and increased uptake in the spleen. Despite these organ-level differences, BCNs and PSs displayed strikingly similar uptake profiles by immune cell populations in vitro and in the liver, spleen, and blood, as assayed by flow cytometry. In conclusion, we have found PEG-$b$-PPS BCNs to be well suited for dual loading and delivery of molecular payloads, with a favorable organ biodistribution and high cell uptake by therapeutically relevant immune cell populations.

36 MATERIALS SCIENCE↗

Characterization of Novel and Efficient Poly-3-hydroxybutyrate (PHB) Producing Bacteria Isolated from Rhizospheric Soils

Polyhydroxybutyrate (PHB) is an eco-friendly, biodegradable plastic which exhibits properties very similar to the conventional plastic, thus, having high potential for replacing non-degradable conventional polypropylene plastic that is responsible for several environmental problems at global level. The present study focuses on the isolation and characterization of potential novel PHB producers. A total of 194 PHB producing bacteria were isolated from rhizospheric soils of three different crops; and subjected to microscopic, biochemical and molecular characterization studies. Quantification of PHB production exhibited significant amount of PHB accumulation (120–132 mg/ml) by a few isolates (KW-4, MS-6, RoW-1, AW-1 and RoS-4). Fourier transform infrared spectroscopy (FTIR) analysis of PHB extracted from the isolates was found to be comparable to the spectra of standard PHB, thus, establishing the chemical nature of the extracted polymer. Detection of PHB granules by transmission electron microscopy (TEM) confirmed the isolates to be efficient PHB producers. For molecular characterization of the isolates, phbC gene amplification studies were undertaken, which resulted into an amplification product of 1089 bp, representing the complete PHB synthase gene. Using 16S rRNA gene amplification and sequencing, the selected isolates were identified as belonging to four major genera, viz., Bacillus, Lysinibacillus, Clostridium and Klebsiella; however, Bacillus being the predominant genera. Analysis of 16S rDNA sequences showed that a few isolates exhibited significant differences from their nearest neighbours (similarity level ranging between 93 and 99%), thus, strongly suggesting that they might represent novel strains. Some of these probable novel high PHB producers reported in the present study hold high potential to be exploited for further industrial-scale mass production of biodegradable polymer.

36 MATERIALS SCIENCE↗

Glassy carbon formation from pyrolysis of polymeric coatings on fiber-optic sensors

Deploying fiber-optic sensors in nuclear reactors requires a detailed understanding of radiation effects on the fiber materials and the transmitted signals. Previous work has shown large wavelength shifts in the reflected spectra obtained from polymer-coated fiber-optic temperature sensors exposed to high neutron fluences. The sensor drift resulting from these wavelength shifts cannot be explained by radiation effects on fused silica glass. These shifts are hypothesized to be caused by the conversion of the polymeric fiber coating to a glassy carbon via radiolysis and/or pyrolysis and subsequent radiation-induced compaction. Here, thermal degradation of these polymeric coatings was studied to provide insight into the potential origins of the sensor drift phenomenon. Acrylate- and polyimide-coated fibers were heated under various temperatures (250–1300 °C) and environments (oxidative and inert), and the resulting coating products were characterized via mass-loss data, scanning electron microscope imaging, and Raman spectroscopy. Results suggest that the polymer decomposition product of both coating types, at least under inert conditions, is indeed a glassy carbon. Analytical models that account for radiation-induced glassy carbon coating compaction show significant compressive fiber strains and predicted wavelength shifts that agree well with experimental measurements, providing additional evidence that supports the hypothesized origins of the sensor drift.

36 MATERIALS SCIENCE↗

A new carboxyl-copper-organic framework and its excellent selective absorbability for proteins

One-pot solvothermal treatments of CuCl{sub 2}·2H{sub 2}O, H{sub 2}L (5-(3-methyl-5-(pyridin-4-yl)-4H-1,2,4-triazol-4-yl) isophthalic acid) and Sm(NO{sub 3}){sub 3}·6H{sub 2}O in water yielded a rare carboxyl-copper-organic framework, [Cu(HL)]{sub n}·nH{sub 2}O (1). The existence of carboxyl groups in compound 1 may be due to the interference of Sm(NO{sub 3}){sub 3}·6H{sub 2}O at the relatively high temperature and autogenous pressure of the reaction. Compound 1 has been characterized by single-crystal X-ray diffraction, PXRD, IR, and elemental analysis. Compound 1 is a 3D coordination polymer, and an xfe-4-Fddd, (4{sup 2}.6.8{sup 3}) topology in 1 is created. In addition, the optical properties have been investigated. Rhodamine B dyeing experiments exhibited that there were residual carboxyl groups on the surface of compound 1. UV–vis results showed that more lysozyme was adsorbed onto the surface of compound 1 than BSA at pH 7.4. At the same time, XPS spectra were also investigated to verify the results. - Graphical abstract: One-pot solvothermal treatments of CuCl{sub 2}·2H{sub 2}O, H2L (5-(3-methyl-5-(pyridin-4-yl)-4H-1, 2, 4-triazol-4-yl) isophthalic acid) and Sm(NO{sub 3}){sub 3}·6H{sub 2}O in water yielded a rare carboxyl-copper-organic framework, [Cu(HL)]n·nH{sub 2}O (1). The existence of carboxyl groups in compound 1 may be due to the interference of Sm(NO{sub 3}){sub 3}·6H{sub 2}O at the relatively high temperature and autogenous pressure of the reaction. Compound 1 has been characterized by single-crystal X-ray diffraction, XRPD, IR, and elemental analysis. Compound 1 is a 3D coordination polymer, and an xfe-4-Fddd, (4{sup 2}.6.8{sup 3}) topology in 1 is created. In addition, the optical properties have been investigated. Rhodamine B dyeing experiments exhibited that there were residual carboxyl groups on the surface of compound 1. UV-vis results showed that more lysozyme was adsorbed onto the surface of compound 1 than that of BSA at pH 7.4. At the same time, XPS spectra were also investigated to verify the results. - Highlights: • A rare carboxyl-copper-organic framework has been hydrothermally synthesized. • An xfe-4-Fddd, (4{sup 2}.6.8{sup 3}) topology in 1 is created. • BSA was significantly less adsorbed onto the carboxylic acid-rich surface than lysozyme. • XPS spectra were also investigated to verify the results of protein adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of thermal destruction behavior of hybrid composites based on polyoxymethylene, ethylene-octene copolymer impact modifier and ZnO nanofiller

Hybrid polymer nanocomposites, composed of polyoxymethylene (POM), ethylene octene copolymer (EOC) and plasma synthesized tetrapod shaped zinc oxide (ZnO), were prepared by using melt compounding. The content of EOC in the POM based composites was varied between 10 and 50 mass %, while the content of ZnO was constant (2 mass %). Thermal behaviour of POM based systems was studied by using thermogravimetric analysis coupled with Fourier transform infrared spectroscopy. The influence of the elastomer content and/or ZnO addition on the thermal stability of POM based systems was evaluated. The influence of the α-octene content in the elastomer on the thermal decomposition behaviour of POM and its nanocomposites with ZnO was also evaluated. Results of thermogravimetric analysis showed that, by rising either the elastomer or ZnO content, thermal stability of the investigated POM composites was increased. The modifying effect of EOC17 in respect of thermal resistance was somewhat larger than that of EOC38 because of the smaller amount of tertiary carbon atoms in the macromolecular structure of the former elastomer. Improved thermal resistance of ZnO containing POM based composites was because of impermeable structure the inorganic nanofiller allowing decrease gas exchange rate and facilitating non-combustible gases, such as CO{sub 2}, stay in the zone of burning. Addition of ZnO have a potential to influence structure of the polymer blend matrix itself by improving its barrier characteristics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Preparation and Characterization of Polyimide Nanocomposites

Many properties of polymeric materials can be enhanced by dispersing small quantities of clay nanocomposites throughout the polymer. Among the enhancements are increases in modulus and resistance to erosion by atomic oxygen and reductions in thermal expansivity, gas permeability, and flammability. To achieve the full extent of enhancement with these polymer-clay nanocomposites, the clay nanoparticles, which have thicknesses of only one-to-several nanometers and lengths and widths of hundreds of nanometers to micrometers, must be exfoliated one from another and then individually dispersed throughout the polymer. This dispersion is achieved only after alkali metal cations (usually Na(+)) that reside on the surfaces of the nanoparticles have been replaced by organocations (typically a quaternary amine cation). This renders the surface of the nanoparticle a more hospitable interface for the organic polymer matrix. Following the cation exchange, the organic clay is either mixed directly into the polymer or is dispersed in monomer which is later polymerized around the nanoparticle.

Orwoll, Robert A.↗

Microstructural, Strength, and Creep Characterization of Sylramic™, Sylramic™-iBN and Super Sylramic™-iBN SiC Fibers

The chemical composition, microstructure, strength, and thermal stability of polymer-derived Sylramic™ SiC fibers fabricated by Dow Corning and COI Ceramics, Inc., and nitrogen-treated Sylramic™ SiC fibers, referred to as Sylramic™-iBN and Super Sylramic™-iBN SiC fibers, were investigated and compared. The baseline Sylramic™ SiC fibers fabricated by both vendors as well as the nitrogen-treated Sylramic™ SiC fibers are composed mostly of β-SiC (~97 wt%) with small amounts of TiB2 (~2 wt%), amorphous carbon (~1 wt%) and trace amounts of B4C. Most of the amorphous carbon is segregated at the core/interior of the fibers. Both baseline and nitrogen-treated Sylramic™ SiC fibers have similar grain size and pore size distribution, except for a thin layer of in-situ grown crystalline BN (30 to 70 nm) on the surface of Sylramic™-iBN and Super Sylramic™-iBN fibers. Wide variation in strength within a batch as well as between batches is observed in both baseline and nitrogen-treated Sylramic™ SiC fibers but both types of fibers are microstructurally stable at temperatures to 1800°C in argon and nitrogen environments compared to Nicalon™-S and Tyranno®-SA SiC fibers. Under the same creep condition, Super Sylramic™-iBN fibers show better creep resistance compared to Sylramic™, Sylramic™-iBN, Hi-Nicalon™-S, and Tyranno®-SA fibers. Possible reasons for strength variability and the mechanism of in-situ BN formation on Sylramic™ SiC fibers are discussed.

SiC fibers↗

Experimental and modeling studies of IPDI-based polyurea elastomers – The role of hard segment fraction

Segmented polyureas (PUa) are industrially important class of polymers widely used in coatings, sealant, and adhesive applications. Here, in this paper, we report synthesis, characterization, and modeling of Isophorone Diisocyanate-Diethyl-Toluene-Diamine-Polyether amine (IPDI-DETDA-PO PUa) with varied hard segment contents of 20, 30, and 40 weight percent. For each of the three materials, we study its structure and phase behavior using FTIR, DSC, and TEM, and clearly show the presence of microphase separation between the hard and soft nanodomains. We then measure the linear viscoelastic response of the PUa-s using DMA (frequency sweeps at multiple temperatures). The DMA data are shown to obey the time-temperature superposition. Finally, we develop a new micromechanical model describing the DMA results; the model describes a phase-separated PUa as two “Fractional-order Maxwell gels” branches, connected in parallel, with the first FMG branch representing the “percolated hard phase" and the second one modeling the “filled soft phase". In agreement with the earlier thermodynamic theories, the volume-fraction of the percolated hard phase is related to the hard segment weight-fraction (HSWF), defined as the combined mass of IPDI and DETDA normalized to the total mass of the polymer. The data and model are found to be in a good qualitative and quantitative agreement.

36 MATERIALS SCIENCE↗

Composition of plastics from waste electrical and electronic equipment (WEEE) by direct sampling

Highlights: Black-Right-Pointing-Pointer The article shows WEEE plastics characterization from a recycling unit in Portugal. Black-Right-Pointing-Pointer The recycling unit has low machinery, with hand sorting of plastics elements. Black-Right-Pointing-Pointer Most common polymers are PS, ABS, PC/ABS, HIPS and PP. Black-Right-Pointing-Pointer Most plastics found have no identification of plastic type or flame retardants. Black-Right-Pointing-Pointer Ecodesign is still not practiced for EEE, with repercussions in end of life stage. - Abstract: This paper describes a direct analysis study carried out in a recycling unit for waste electrical and electronic equipment (WEEE) in Portugal to characterize the plastic constituents of WEEE. Approximately 3400 items, including cooling appliances, small WEEE, printers, copying equipment, central processing units, cathode ray tube (CRT) monitors and CRT televisions were characterized, with the analysis finding around 6000 kg of plastics with several polymer types. The most common polymers are polystyrene, acrylonitrile-butadiene-styrene, polycarbonate blends, high-impact polystyrene and polypropylene. Additives to darken color are common contaminants in these plastics when used in CRT televisions and small WEEE. These additives can make plastic identification difficult, along with missing polymer identification and flame retardant identification marks. These drawbacks contribute to the inefficiency of manual dismantling of WEEE, which is the typical recycling process in Portugal. The information found here can be used to set a baseline for the plastics recycling industry and provide information for ecodesign in electrical and electronic equipment production.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

NDE and SHM Simulation for CFRP Composites

Ultrasound-based nondestructive evaluation (NDE) is a common technique for damage detection in composite materials. There is a need for advanced NDE that goes beyond damage detection to damage quantification and characterization in order to enable data driven prognostics. The damage types that exist in carbon fiber-reinforced polymer (CFRP) composites include microcracking and delaminations, and can be initiated and grown via impact forces (due to ground vehicles, tool drops, bird strikes, etc), fatigue, and extreme environmental changes. X-ray microfocus computed tomography data, among other methods, have shown that these damage types often result in voids/discontinuities of a complex volumetric shape. The specific damage geometry and location within ply layers affect damage growth. Realistic threedimensional NDE and structural health monitoring (SHM) simulations can aid in the development and optimization of damage quantification and characterization techniques. This paper is an overview of ongoing work towards realistic NDE and SHM simulation tools for composites, and also discusses NASA's need for such simulation tools in aeronautics and spaceflight. The paper describes the development and implementation of a custom ultrasound simulation tool that is used to model ultrasonic wave interaction with realistic 3-dimensional damage in CFRP composites. The custom code uses elastodynamic finite integration technique and is parallelized to run efficiently on computing cluster or multicore machines.

Leckey, Cara A. C.↗

Mitigation of Silver Ion Loss from Solution by Polymer Coating of Metal Surfaces, Part IV

Ionic silver (Ag+) biocide is a leading candidate to provide residual microbial control in spacecraft potable water systems, but suffers from rapid concentration loss due to interactions with the metallic storage containers and tubing. One approach to resolve this problem is the coating of metal surfaces with an inert barrier film. In previous reports, we have described our investigations addressing Ag+ loss mitigation and adhesion performance of parylene barrier coatings on coupons of several metal alloys and 316Ltubing under static immersion. In such conditions, parylene-C and -AF4 coatings have shown excellent Ag+loss mitigation and mixed long-term adhesion performance, depending on parylene species and substrate surface chemistry/structure. In Part IV of this series, we report on our work to investigate the performance of parylene-C barrier coatings, under more challenging and realistic conditions, in order to evaluate potential suitability for use. The resilience and associated Ag+ loss with Parylene-C coating on½” (12.7 mm)316L tubing and fittings under medium-term immersion and repeated fitting dis/reassembly were investigated. Potential mechanical challenges to barrier coatings in spacecraft potable water systems were investigated, with two main focuses being identified: liquid flow/pressure cycling in tubing and cyclic operation of bellows in positive-expulsion storage tanks. Two corresponding testbeds for experimental characterization of coating performance were developed. In the Flow/Pressure Testbed System, Ag+ solution will be pumped through internally coated 316L tubing, with optional pressure cycling. In the Bellows Tank Testbed System, an internally coated edge-welded 316L bellows containing Ag+ solution will be cyclically extended and compressed, analogous to the operation of bellows tanks used for potable water storage and delivery on the International Space Station. The design and operation of these testbeds are described. Finally, the Ag+ adsorption and saturation behaviors of Kalrez and Viton, for potential use as seal materials in fittings and other connections, were characterized in limited experiments.

mitigation↗

Circularity in Sequence-Controlled Copolyamides Enabled by Regioselective Enzymatic Hydrolysis

Sequence-controlled polymers enable precise control over macromolecular structures and function, but both their synthesis and end-of-life management remain fundamental challenges. Achieving high sequence fidelity is synthetically demanding, and conventional depolymerization methods lack regioselectivity, leading to irreversible loss of encoded molecular information and limiting polymer circularity. Enzymatic catalysis offers a potential solution by combining substrate specificity with selective bond cleavage. Here, we report the synthesis, characterization, and regioselective enzymatic depolymerization of poly- (X,AMA), a sequence-controlled copolyamide composed of alternating hexamethylenediamine−adipic acid (MA) and pxylylenediamine− adipic acid (XA) repeat units. Poly(X,AMA) was synthesized via solid-state polycondensation (SSP) of sequence-defined oligomers, enabling precise control over repeat-unit order. Polymer microstructure and sequence fidelity were confirmed by 13 C NMR spectroscopy and MALDI−TOF mass spectrometry. Comparison with a statistical copolymer analogue and Nylon-66 demonstrated pronounced differences in crystallinity, morphology, and thermal behavior arising from sequence control. Screening of 96 Nylon hydrolase homologues against poly(X,AMA) revealed strongly enzyme-dependent depolymerization profiles. While tetrad formation was generally favored, enzymes displayed pronounced sequence selectivity, preferentially releasing distinct sequence-defined tetrads XAMA or MAXA. SSP of sequence-defined tetrad MAXA produced a copolyamide with near identical monomer ordering as poly(X,AMA). Computational modeling of enzyme−substrate complexes identified structural features consistent with the observed regioselectivity. Together, these results establish selective enzymatic depolymerization as a viable strategy for the circular recycling of sequence-controlled polymers and provide a foundation for the rational engineering of enzymes for programmable polymer deconstruction.

Amides↗

Synthesis and Characterization of Silicon Carbide Ceramic Composites with CeO 2 Powder

This study pioneers the fabrication and characterization of silicon carbide (SiC) containing cerium dioxide (CeO 2 ). CeO 2 powder was tested as a surrogate for actinide oxide waste forms such as uranium dioxide (UO 2 ) and plutonium dioxide (PuO 2 ). Several syntheses were evaluated with varying amounts of preceramic polymer (SMP-10 resin) and CeO 2 containing either SiC fiber, carbon fiber, or no fibers. Scanning electron microscopy (SEM) was used to characterize morphology and compositional differences, and energy-dispersive x-ray spectroscopy (EDS) was used to provide semiquantitative elemental analysis. In addition, each sample was characterized by density, powder x-ray diffraction (pXRD), and Raman spectroscopy. Samples containing nearly more than four times CeO 2 powder than SMP-10 resin by mass had the best properties. This research establishes a unique synthesis for SiC containing high concentrations of CeO 2 powder to illustrate how it may be managed as a potential waste form.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Shear and extensional rheology of polyethylenes recycled using a solvent dissolution process

There is high market demand for increasing the viability of current plastic recycling processes. In this work rheology is used to evaluate the mechanical properties of a solvent dissolution recycled polymer compared to its virgin untreated precursor. Solvent dissolution and precipitation are used to target multi-layer, multi-component, industry films, which cannot be mechanically recycled. Polyethylene was chosen as the primary polymer of interest. Polymer thermal stability was monitored via time-resolved rheology; consecutive frequency sweeps over the course of an hour while under isothermal conditions. Additional rheological experiments were performed within the identified thermally stable conditions. Small-angle oscillatory shear was complemented with steady shear viscosity experiments over a wide range of shear rates. Extensional rheology was used to determine changes in molecular weight and cross link density. As a result, rheological characterization is supplemented with gas chromatography–mass spectrometry of the solvent wash to determine components stripped from the virgin polymers during solvent treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of Aerogel Scattering Filters for Astronomical Telescopes

We have developed a suite of novel infrared-blocking filters made by embedding scattering particles in a polymer aerogel substrate. Our developments allow us to tune the spectral performance of the filters based on both the composition of the base aerogel material and the properties of the scattering particles. Our filters are targeted for use in a variety of applications, from ground-based CMB experiments to planetary science probes. We summarize the formulations we have fabricated and tested to date, including several polyimide base aerogel formulations incorporating a range of size distributions of diamond scattering particles. We also describe the spectral characterization techniques used to measure the filters’ optical properties, including the development o fa mm-wave Fourier transform spectrometer testbed.

aerogel, filter, blocking, scattering, Fourier Tra↗

Development of a Printable Prill Formulation Technique and Demonstration of Monomodal Prill Size on Compaction Density and Compressive Strength

Polymer-bonded explosive molding powder, or “prills,” are relied on for the fabrication of pressed high explosives since the 1950's. The wet granulation technique, also known as “slurry coating,” that is used to formulate prills, is a complex process that results in polydisperse and variable yields. This makes it difficult to study the mesoscale effect that prills have on the microstructure of a pressed article. The following study introduces a novel approach to energetic granulation that leverages techniques used in the additive manufacturing of paste-like energetic materials. This extrusion granulation, or prill printing technique, makes it possible to tailor the sizes and shapes of prills, allowing for their morphological influences to be studied in a controlled manner. The following work details the fabrication and characterization of four monomodal size lots of prills using an inert formulation (95 wt.% melamine, 5 wt.% polymer binder). Prills from each size lot were die-pressed using a fixed recipe to investigate how prill size impacts compaction density and therefore compressive strength. It was found that larger prills influence the pressing density by creating larger defects within the microstructure of a pressed article, resulting in a decrease in compressive strength.

direct ink write↗

4-quinolin-8-yloxy Linked Triphenylamine Based Polyimides: Blue Light Emissive and Potential Hole-Transport Materials

A series of fluorescent donor- acceptor (D-A) alternating copolyimides (P1, P2, P3 and P4) with 4-quinolin-8-yloxy linked triphenylamine main polymer chain have been synthesized by conventional polycondensation. All the synthesized co-polyimides were characterized by elemental, gel permeation chromatography and FTIR spectral analysis. These newly prepared PIs possess HOMO energy levels in range of − 4.74 to − 4.78 eV and have medium optical band gaps. The photoluminescence spectral analysis revealed blue to violet emission with appreciable efficiency with lower onset oxidation potentials suitable for the facile hole injection materials. All the photophysical and electrochemical properties were also explored in context of effect of the pendant 4- quinolin-8-yloxy, indicating suitable combination of donor (TPA) on one hand and imide and pendant as acceptor on both ends.Graphical Abstract .

74 ATOMIC AND MOLECULAR PHYSICS↗

Controllable synthesis and growth mechanism of {alpha}-Co(OH){sub 2} nanorods and nanoplates by a facile solution-phase route

A facile chemical precipitation route has been developed to control synthesis of {alpha}-cobalt hydroxide nanostructures with rod-like and plate-like morphologies. The {alpha}-Co(OH){sub 2} nanorods were achieved in large quantity when the experiments were carried out in the presence of a suitable shape-controlling reagent polyvinyl pyrrolidone (PVP), while the {alpha}-Co(OH){sub 2} nanoplates were obtained when the experiments were conducted in the absence of PVP, whilst keeping other experimental conditions constant. The chemical composition and morphologies of the as-prepared {alpha}-Co(OH){sub 2} nanoparticles were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The effect of polymer PVP on the morphologies of {alpha}-Co(OH){sub 2} nanoparticles were discussed in detail. The results indicated that PVP played a key role for the formation of {alpha}-Co(OH){sub 2} nanorods. The growth mechanism of the as-synthesized nanorods and nanoplates were discussed in detail based on the experimental results. A possible growth mechanism has been proposed to illustrate the growth of {alpha}-Co(OH){sub 2} nanorods. - Graphical abstract: A facile solution-phase route has been developed to synthesize {alpha}-Co(OH){sub 2} nanorods and nanoplates. The possible growth mechanism of nanorods and nanoplates was proposed. Highlights: Black-Right-Pointing-Pointer A facile controllable route was described for {alpha}-Co(OH){sub 2} nanowires and nanoplates. Black-Right-Pointing-Pointer The {alpha}-Co(OH){sub 2} nanowires were achieved in the presence of shape controller PVP. Black-Right-Pointing-Pointer The {alpha}-Co(OH){sub 2} nanoplates were obtained in the absence of shape controller PVP. Black-Right-Pointing-Pointer The shape controller PVP played a key role in the formation of {alpha}-Co(OH){sub 2} nanowires.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗