Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “planetary temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Consequences of a past encounter of the earth with an interstellar cloud

In its motion through the Galaxy the sun may have suffered a number of encounters with dense interstellar clouds for which the number density of molecular hydrogen is in excess of 1000 per cu cm. Several authors have shown that this is sufficient density to stop the solar wind inside earth's orbit. Earth's atmosphere would be subjected to an interstellar H2 flux of more than 7 billion per sq cm/sec for periods of the order of 100,000 years. Simple scaling arguments are used to examine several consequences for earth's atmosphere: (1) the ionospheric F region would largely disappear; (2) the water-vapor content of the middle atmosphere would be greatly enhanced, reducing the mesospheric ozone concentrations and thereby lowering the average temperature and altitude of the mesopause; (3) as a result of (2), widespread mesospheric ice clouds would occur, increasing the planetary albedo; and (4) the resultant radiative cooling at the surface may have been sufficient to 'trigger' an ice age.

Mckay, C. P.↗

The history of an atmosphere of impact origin

Most of the masses accreting onto the earth and terrestrial planets impacted at sufficiently high velocities to release their volatiles into the atmosphere by impact-heating. However, based on models of planetary growth by accumulation from solid bodies, the time-scale for accretion was sufficiently long that the average surface temperatures could not have risen above 320 K. Using measured reaction rates, the released volatiles should have been re-incorporated into the planet by hydrating the surface minerals and were subsequently buried during accretion. Rapid hydration of impact products precludes the formation of a thick atmosphere as the planet accreted. Thus, only the subsequent differentiation and evolution of the terrestrial planets determined the size and composition of each planet's atmosphere.

Jakosky, B. M.↗

Thermal stress response of General Purpose Heat Source (GPHS) aeroshell material

A thermal stress test was conducted to determine the ability of the GPHS aeroshell 3 D FWPF material to maintain physical integrity when exposed to a severe heat flux such as would occur from prompt reentry of GPHS modules. The test was performed in the Giant Planetary Facility at NASA's Ames Research Center. Good agreement was obtained between the theoretical and experimental results for both temperature and strain time histories. No physical damage was observed in the test specimen. These results provide initial corroboration both of the analysis techniques and that the GPHS reentry member will survive the reentry thermal stress levels expected.

Grinberg, I. M.↗

Spacecraft mission and shielding thermal study for a space-storable fluorine-hydrazine propulsion system

The thermal management and shielding problems related to a space-storable fluorine-hydrazine propulsion system are investigated. The general configuration of a space storable propulsion spacecraft and three types of shield configurations are described in detail. An advanced MLI shielding design is proposed showing good agreement with test data. All examined shield configurations were found to be acceptable for inner as well as outer planetary missions. However, for the latter small local heaters may be required to maintain the fluorine above a minimum required temperature of approximately -350 F. The fluorine/hydrazine system with a 25 percent higher specific impulse than the conventionally used propulsion systems, was suggested for interplanetary missions that require substantial velocity changes.

Jones, J. A.↗

New theoretical and experimental methods for pressure broadened linewidths and their interpretation

A review of recent progress in the theory of collisional line broadening, particularly the impact of recent advances in collision dynamics calculations is presented. Some new approaches to the interpretation of experimentally measured linewidths and their impact on planetary atmosphere research are discussed. Experimental techniques which may have some advantage in providing pressure broadening data at very low temperatures are also mentioned.

Gelfand, J. J.↗

Impact and Collisional Processes in the Solar System

The mechanical and thermodynamic aspects of shock impact cratering and accretionary processes on solid planets and satellites are being investigated experimentally. The recently proposed model of Melosh, describing the physics controlling the size and velocity of only lightly shocked spalled ejecta surrounding the crushed rock region of an impact crater, was studied at the Ames gun facility. Spall velocity measurements using lead and aluminum bullets were conducted. In addition, shock temperatures of silicates and volatile bearing minerals were measured using radiative techniques. Finally impact devolatilization of minerals and accretion of planetary atmospheres were examined. Measurements of the release isentropes of CaCO3 were carried out. The effect on the water budgets of planets of reactions which occur when metallic iron (which would be present in chondritic material) is introduced into a simple accretion model is under investigation.

Ahrens, T. J.↗

Allegheny Observatory search for planetary systems

The newly developed Multichannel Astrometric Photometer (MAP) and a rebuilt red light 0.76 meter Thaw refractor are used in an astrometric observational program to detect Jupiter-like planets in orbit about nearby stars. The program includes 15 stars and is obtaining approx. 12 good observations per year of each of them, sufficient to assure an annual normal point precision of 0.001 arcsec (1 mas) per object. The observational program will yield the first astrometric information about planetary systems in general. The astrometric technique is most sensitive to nearby planetary systems and to massive planets that have orbits that place them within the regions around a star where the temperature is sufficiently low to permit the existence of water ice grains. Thus it covers a different search space than that of radial velocity techniques. Currently the only astrometric survey program, it is complementary to other detection programs and some target stars have been included to assure overlap with them. The minimum detectable mass varies with the particular target star from objects almost twice as massive as Neptune to bodies almost twice as massive as Jupiter.

Gatewood, George D.↗

Global Observation of Planetary-Scale Waves in UARS HRDI and WINDII MLT Winds

The purpose of this study is to use examine planetary-scale motions in the UARS mesosphere and lower thermospheric data. The actual study was confined to HRDI winds and temperatures, since these observations were more continuous, and spanned the 60-120 km range. Three classes of waves were studied: fast equatorial Kelvin waves, nonmigrating tides, and the midlatitude 2-day wave. The purpose of the Kelvin wave and the 2-day wave studies was to test whether the waves significantly affect the mean flow. Such studies require high-quality spectral definitions in order to derive the wave heat and momentum flux divergence which can act in comination to drive the mean flow. Accordingly, HRDI winds from several special observing campaigns were used for analyses of fast (periods under 5 days) waves. The campaigns are characterized by continuous viewing by HRDI in 2 viewing directions, for periods of 10-12 days. Data sampled in this manner lend themselves quite well to "asynoptic spectral analysis", from which motions with periods as low as one day can be retrieved with relatively minimal aliasing.

Lieberman, Ruth↗

Utilizing Radioisotope Power System Waste Heat for Spacecraft Thermal Management

One of the advantages of using a Radioisotope Power System (RPS) for deep space or planetary surface missions is the readily available waste heat, which can be used to maintain electronic components within a controlled temperature range, to warm propulsion tanks and mobility actuators, and to gasify liquid propellants. Previous missions using Radioisotope Thermoelectric Generators (RTGs) dissipated a very large quantity of waste heat due to the relatively low efficiency of the thermoelectric conversion technology. The next generation RPSs, such as the 110-watt Stirling Radioisotope Generator (SRG110) will have much higher conversion efficiencies than their predecessors and therefore may require alternate approaches to transferring waste heat to the spacecraft. RTGs, with efficiencies of approx. 6 to 7% and 200 C housing surface temperatures, would need to use large and heavy radiator heat exchangers to transfer the waste heat to the internal spacecraft components. At the same time, sensitive spacecraft instruments must be shielded from the thermal radiation by using the heat exchangers or additional shields. The SRG110, with an efficiency around 22% and 50 C nominal housing surface temperature, can use the available waste heat more efficiently by more direct heat transfer methods such as heat pipes, thermal straps, or fluid loops. The lower temperatures allow the SRG110 much more flexibility to the spacecraft designers in configuring the generator without concern of overheating nearby scientific instruments, thereby eliminating the need for thermal shields. This paper will investigate using a high efficiency SRG110 for spacecraft thermal management and outline potential methods in several conceptual missions (Lunar Rover, Mars Rover, and Titan Lander) to illustrate the advantages with regard to ease of assembly, less complex interfaces, and overall mass savings.

Pantano, David R.↗

Compact Micromachined Infrared Bandpass Filters for Planetary Spectroscopy

The future needs of space based observational planetary and astronomy missions include low mass and small volume radiometric instruments that can operate in high radiation and low temperature environments. Here we focus on a central spectroscopic component, the bandpass filter. We model the bandpass response of the filters to target the wavelength of the resonance peaks at 20, 40, and 60 micrometers and report good agreement between the modeled and measured response. We present a technique of using common micromachining processes for semiconductor fabrication to make compact, free standing resonant metal mesh filter arrays with silicon support frames. The process can accommodate multiple detector array architectures and the silicon frame provides lightweight mechanical support with low form factor. We also present a conceptual hybridization of the filters with a detector array.

Merrell, Willie C., II↗

A Multifunctional Hot Structure Heatshield Concept for Planetary Entry

A multifunctional hot structure heatshield concept is being developed to provide technology enhancements with significant benefits compared to the current state-of-the-art heatshield technology. These benefits can potentially enable future planetary missions. The concept is unique in integrating the function of the thermal protection system with the primary load carrying structural component. An advanced carbon-carbon material system has been evaluated for the load carrying structure, which will be utilized on the outer surface of the heatshield, and thus will operate as a hot structure exposed to the severe aerodynamic heating associated with planetary entry. Flexible, highly efficient blanket insulation is sized for use underneath the hot structure to maintain required operational internal temperatures. The approach followed includes developing preliminary designs to demonstrate feasibility of the concept and benefits over a traditional, baseline design. Where prior work focused on a concept for an Earth entry vehicle, the current efforts presented here are focused on developing a generic heatshield model and performing a trade study for a Mars entry application. This trade study includes both structural and thermal evaluation. The results indicate that a hot structure concept is a feasible alternative to traditional heatshields and may offer advantages that can enable future entry missions.

Walker, Sandra P.↗

Developing a Foundation for Space-Based Two-Phase Thermal Control Systems: Future of 2-Phase Thermal Control

Two-phase thermal control systems in microgravity, with significant density differences between phases, pose challenges for many current and proposed spacecraft systems. Because of the lack of understanding of these effects and the inability to scale multiphase systems in low gravity, NASA generally opts to avoid using two-phase systems for spacecraft despite the significant performance increases and lower mass. The goal of this panel discussion will be to identify key technology gaps and challenges that thermal engineers face today when considering a two-phase thermal management system. The panel discussion will begin with a brief overview of recent and on-going NASA projects designed to elicit a fundamental understanding of gas-liquid two phase behavior as it applies to thermal control systems in the Space environment. The projects/experiments discussed will range from boiling/condensation fundamentals, heat pipes, and cryogenic storage systems. We will identify what fundamental question or questions are being addressed in each case. An overview will be also be presented to address future mission needs and the specific advantages multi-phase systems offer, in particular for low cost planetary science missions and enabling missions in extreme environments. The need for efficient heat transfer with concurrent spatial and temporal temperature stability to reduce thermally-induced noise drives a serious look at multi-phase systems as a solution. Furthermore, missions to environments such as the Venus surface or penetration of ice layers in ocean worlds will likely require them. Time will be allocated at the end of this session to allow comments and questions from attendees. The intent is to use this session as a starting point to advocate for a coordinated technology development effort in this area.

Thermal Control Systems↗

Determination of the Complex Refractive Indices of Aerosol Analogs Formed at Low Temperatures with the NASA Ames Optical Constants Facility (OCF)

The NASA Ames COsmic SImulation Chamber (COSmIC) [1] is a unique experimental facility that allows: 1) cooling a gas mixture to low temperature (150 K) in a jet expansion before inducing chemistry by plasma; and 2) controlling the extent of the chemical reactions by employing a pulsed plasma discharge. This enables the study of the early stages of aerosol production, as well as specific chemical pathways in planetary environments (e.g. Titan’s and Pluto’s atmospheres). Both the gas and solid products can be studied. For a decade COSmIC has been used to simulate Titan’s atmospheric chemistry at low, Titan-like temperature [2]. New developments on the COSmIC facility are investigating formation of aerosols in tenuous, or transitory, atmospheres of other icy bodies [3-5], as well as cool exoplanets atmospheres having a hydrocarbon component, that results in formation of hazes and/or surface deposits of refractory materials. The new Ames Optical Constants Facility enables determination of the aerosol analogs' complex refractive indices, n and k, from 0.59 to 200 μm [2]. Here we report efforts of determining n and k from ex-situ transmission measurements of solid samples produced from binary N-CH and Ar-CH, and tertiary N-CH-CH and Ar-CH-CHgas mixtures in COSmIC, and deposited onto various substrates. A computational technique [6] that addresses interference fringes observed in the laboratory transmission data, particularly at wavelengths < 3 μm, has been implemented and applied to determine n and k for the samples. At visible and near-infrared wavelengths(0.4-1.6 μm) the deposit thickness, and its variation, as well as n and k were determined by a commercial entity. These data provide the ability to compare results, from independent methods, in the region of overlap between the two approaches.

Ella M Sciamma-O'Brien↗

Abundances in the Planetary Nebula IC 5217

High resolution optical wavelength spectroscopic data were secured in the optical wavelengths, 3700A - 10,050A, for the planetary nebula IC 5217 with the Hamilton Echelle Spectrograph at Lick Observatory. These optical spectra have been analyzed along with the near-UV and UV archive data. Diagnostic analyses indicate a nebular physical condition with electron temperature of about 10,700 K (from the [O III] lines) and the density of N(sub epsilon) = 5000/cm. Ionic concentrations have been derived with the representative diagnostics, and with the aid of a photoionization model construction, we derived the elemental abundances. Contrary to the previous studies found in the literature, He and C appear to be depleted compared to the average planetary nebula and to the Sun (and S marginally so), while the remaining elements appear to be close to the average value. IC 5217 may have evolved from an O-rich progenitor and the central star temperature of IC 5217 is likely to be 92,000 K.

Hyung, Siek↗

MASS LOSS FROM PLANETARY NEBULAE IN ELLIPTICAL GALAXIES

Early-type galaxies possess a dilute hot ((2-10) x 10{sup 6} K) gas that is probably the thermalized ejecta of the mass loss from evolving stars. We investigate the processes by which the mass loss from orbiting stars interacts with the stationary hot gas for the case of the mass ejected in a planetary nebula event. Numerical hydrodynamic simulations show that at first, the ejecta expands nearly symmetrically, with an upstream bow shock in the hot ambient gas. At later times, the flow past the ejecta creates fluid instabilities that cause about half of the ejecta to separate and the other half to flow more slowly downstream in a narrow wake. When radiative cooling is included, most of the material in the wake (>80%) remains below 10{sup 5} K while the separated ejecta is hotter (10{sup 5}-10{sup 6} K). The separated ejecta is still less than one-quarter the temperature of the ambient medium and the only way it will reach the temperature of the ambient medium is through turbulent mixing (after the material has left the grid). These calculations suggest that a significant fraction of the planetary nebula ejecta may not become part of the hot ambient material. This is in contrast to our previous calculations for continuous mass loss from giant stars in which most of the mass loss became hot gas. We speculate that detectable O VI emission may be produced, but more sophisticated calculations will be required to determine the emission spectrum and to better define the fraction of cooled material.

79 ASTRONOMY AND ASTROPHYSICS↗

Aeolian weathering of Venusian surface materials - Preliminary results from laboratory simulations

An attempt is made to duplicate the atmospheric temperature, pressure, and approximate gas composition of all surface elevations on Venus by means of a simulator environment in which particles are impacted against rock targets as a way of studying planetary aeolian processes. While particles are abraded even at the low impact velocities envisioned for Venus, the same particles do not generate basaltic rock abrasion for impact velocities lower than 1 m/sec; comminution debris is instead transferred onto rock surfaces to form an accretion layer. These phenomena are seen as functions of the greater than 660 K temperatures encountered.

Marshall, John R.↗

Lunar and planetary studies

Observations were made and analyzed for Uranus, Saturn, and Titan in the continuum at the VLA and some spectroscopy at OVRO. Accurate A, B, C rings brightness temperatures from Saturn are a basis of scattering theory calculations. Variations of 2 cm limb darkening with pole orientation were modeled and are shown to originate in the deep atmosphere.

Muhleman, D. O.↗

A search for fast planetary-scale instabilities in the equatorial stratosphere

A method proposed by Salby for computing space-time Fourier transforms of asynoptic satellite data has been applied to stratospheric brightness temperature measurements from January and February 1979 in a search for two fast-moving low-wavenumber instabilities predicted in a numerical study by Lynch. The method is capable of producing spectra down to periods of approximately one day with no distortion due to the asynopticity of the data. No spectral peaks corresponding to the predicted modes were found; taking the noise level as the upper limit for their amplitudes at the altitudes observed, an upper limit of approximately 0.6 to 1.2 degrees Kelvin may be set for their peak amplitudes near the mesopause.

Lait, Leslie R.↗