Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Flexible Copper Metal Circuits via Desktop Laser Printed Masks

A novel process is demonstrated that produces patterns of electrically conductive copper on a flexible polyimide film substrate using standard desktop laser printed toner and near room temperature aqueous chemistry. The laser toner acts as a mask to selectively block the ion exchange self-metallization (IESM) reduction reaction that forms nanoscale silver or palladium coatings at the polyimide surface. The silver or palladium IESM coating is then used as a catalyst for electroless deposition of copper. Under appropriate conditions, the copper is deposited selectively on top of the catalyst layer. The resulting copper layer has a measured sheet resistance as low as 0.3 Ohms/sq. Electrical isolation was measured between copper traces spaced as close as 300 microns, and high conductivity was measured along traces with widths as low as 200 microns. The minimum pattern size appears to be limited primarily by the resolution of the laser toner pattern, as the IESM metal layer was observed to follow the contours of individual toner particles. Here, the process avoids the use of high temperature, vacuum, and organic solvents and is thus suitable for very low cost prototyping or distributed manufacturing of simple electronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Continuous Additive Manufacturing using Olefin Metathesis

Abstract The development of chemistry is reported to implement selective dual‐wavelength olefin metathesis polymerization for continuous additive manufacturing (AM). A resin formulation based on dicyclopentadiene is produced using a latent olefin metathesis catalyst, various photosensitizers (PSs) and photobase generators (PBGs) to achieve efficient initiation at one wavelength (e.g., blue light) and fast catalyst decomposition and polymerization deactivation at a second (e.g., UV‐light). This process enables 2D stereolithographic (SLA) printing, either using photomasks or patterned, collimated light. Importantly, the same process is readily adapted for 3D continuous AM, with printing rates of 36 mm h –1 for patterned light and up to 180 mm h –1 using un‐patterned, high intensity light.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Brain phosphoproteomic analysis identifies diabetes‐related substrates in Alzheimer's disease pathology in older adults

INTRODUCTION: Type 2 diabetes increases the risk of Alzheimer's disease (AD) dementia. Insulin signaling dysfunction exacerbates tau protein phosphorylation, a hallmark of AD pathology. However, the comprehensive impact of diabetes on patterns of AD-related phosphoprotein in the human brain remains underexplored. METHODS: We performed tandem mass tag–based phosphoproteome profiling in post mortem human brain prefrontal cortex samples from 191 deceased older adults with and without diabetes and pathologic AD. RESULTS: Among 7874 quantified phosphosites, microtubule-associated protein tau (MAPT) phosphorylated at T529 and T534 (isoform 8 T212 and T217) were more abundant in AD and showed differential associations with diabetes. Network analysis of co-abundance patterns uncovered synergistic interactions between AD and diabetes, with one module exhibiting higher MAPT phosphorylation (15 MAPT phosphosites) and another displaying lower MAP1B phosphorylation (22 MAP1B phosphosites). DISCUSSION: This study offers phosphoproteomics insights into AD in diabetes, shedding light on mechanisms that can inform the development of therapeutics for dementia. Highlights: The risk of Alzheimer's disease (AD) dementia is increased among older adults living with diabetes. The patterns of AD-related phosphoprotein in the human brain in older adults are differential among older adults living with diabetes. Microtubule-associated protein tau phosphorylated at T529 and T534 (isoform 8 T212 and T217) showed differential associations with diabetes. Phosphosite co-abundance networks of synergistic interactions between AD and diabetes were identified.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Optimization of leaf morphology in relation to leaf water status: A theory

The leaf economic traits such as leaf area, maximum carbon assimilation rate, and venation are all correlated and related to water availability. Furthermore, leaves are often broad and large in humid areas and narrower in arid/semiarid and hot and cold areas. We use optimization theory to explain these patterns. We have created a constrained optimization leaf model linking leaf shape to vein structure that is integrated into coupled transpiration and carbon assimilation processes. The model maximizes net leaf carbon gain (NPPleaf) over the loss of xylem water potential. Modeled relations between leaf traits are consistent with empirically observed patterns. As the results of the leaf shape-venation relation, our model further predicts that a broadleaf has overall higher NPPleaf compared to a narrowleaf. In addition, a broadleaf has a lower stomatal resistance compared to a narrowleaf under the same level of constraint. With the same leaf area, a broadleaf will have, on average, larger conduits and lower total leaf xylem resistance and thus be more efficient in water transportation but less resistant to cavitation. By linking venation structure to leaf shape and using water potential as the constraint, our model provides a physical explanation for the general pattern of the covariance of leaf traits through the safety-efficiency trade-off of leaf hydraulic design.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Past and present disturbances generate spatial variation in seed predation

Seed survival is a key process for plant populations; variation in the activity and abundance of animals that consume seeds can lead to dramatic shifts in seed fate. Because granivores may respond to contemporary disturbance as well as to enduring changes in habitats caused by past disturbances, understanding seed fate requires studies capable of evaluating how past and present disturbances modify granivore communities, foraging activity, and ultimately, seed predation. Historic agricultural land use and contemporary canopy harvesting are widespread disturbances that could generate large-scale patterns of seed fate by modifying environmental characteristics that determine granivore identity and behavior. Here, to evaluate whether land-use history and canopy harvesting affect seed–animal interactions, we conducted an experiment distributed across 80,000 ha of longleaf pine woodlands that coupled large-scale canopy harvesting at seven 4-ha sites containing both post-agricultural land use and nonagricultural land use in South Carolina, United States. We deployed a total of 28,000 nail-tagged seeds and recovered the tags to quantify seed fate. Past agricultural land use and contemporary canopy harvesting interacted to affect the rate of seed predation. Seed predation rates in harvested sites depended on land-use history: Seed predation was 30% lower in post-agricultural plots than in nonagricultural plots. This interaction was driven by the differential effect of land-use history and canopy harvesting on rodent activity. Camera traps revealed that Sigmodon hispidus only foraged in harvested plots and was most active in nonagricultural plots. In harvested plots, seed removal increased with S. hispidus activity. In unharvested plots, seed removal increased with Sciurus niger activity, but S. niger was not affected by land-use history. In finding that land-use history and canopy harvesting determine the outcomes of seed–animal interactions, we show that understanding patterns of seed predation is contingent upon the interplay of disturbances in both the distant past and recent past. These results suggest that patterns of past land use and present land use may help reconcile the considerable variation in seed fate observed in ecological communities.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Implications of Changes in Water Stress and Precipitation Extremes for Cocoa Production in Côte D'ivoire and Ghana

ABSTRACT Climate change induces high variability in drought patterns and extreme precipitation indices in rainfed cocoa farming, impacting cocoa production. This study evaluated water stress, meteorological and agricultural drought conditions, and critical extreme precipitation indices in the world's two largest cocoa‐producing nations from 1981 to 2022. The results revealed a significant reduction in total annual precipitation (PRCPTOT), in the last three decades, with the greatest decline in the 1991–2000 and 2011–2022 periods. Ghana experienced the most significant reduction up to 15% (200 mm/year) in the last decade, attributed to a substantial decrease in wet days number (RR1) up to 25 days per year, a reduction in maximum consecutive wet days (CWD) up to 6 days per year, and an increase in maximum consecutive dry days (CDD) up to 15 days per year. Moreover, there was a notable decline in the Simple Daily Intensity Index (SDII), with reductions of up to 4 mm/day in certain areas, contributing to increased drought frequency, severity, and duration. In the most recent decade (2011–2022), particularly during the extremely dry years of 2013 and 2015, cocoa‐growing regions in Ghana (GHA) and eastern Côte d'Ivoire (CIV) experienced prolonged agricultural drought expressed by soil moisture deficit, typically extending from May to September. Additionally, large portions of central and eastern Ghana, as well as northeastern Côte d'Ivoire experienced sustained water stress, with over three consecutive months of total monthly precipitation falling below 100 mm, negatively impacting cocoa productivity. The decrease in the yield in the range of 2.5% to 37% was noted in the dry years and the following years, varying according to the country depending on the severity of the drought. Sensitivity analysis highlights cocoa yield's responsiveness to drought and water stress, particularly in specific years when water stress occurred, such as 1984,1985, 1989, 1995, 1999, 2000, and 2008. Considering the observed trends in precipitation patterns and their impact on cocoa production, it is crucial to acknowledge the inherent uncertainty of future precipitation patterns due to climate change. To address this challenge effectively, our study underscores the importance of identifying and closely monitoring regions currently facing water stress, as determined by precipitation and drought indicators. Over the analysed period (1981–2022), we have noted shifts in the distribution of water‐stressed areas, highlighting the dynamic nature of this issue. Consequently, we advocate for a targeted approach to implement cocoa supplementary irrigation in consistently water‐stressed regions.

Obahoundje, Salomon [International Water Managemen↗
DOE OSTI2023

Coupled primary production and respiration in a large river contrasts with smaller rivers and streams

Abstract Although time series in ecosystem metabolism are well characterized in small and medium rivers, patterns in the world's largest rivers are almost unknown. Large rivers present technical difficulties, including depth measurements, gas exchange (, ) estimates, and the presence of large dams, which can supersaturate gases. We estimated reach‐scale metabolism for the Hanford Reach of the Columbia River (Washington state, USA), a free‐flowing stretch with an average discharge of 3173 . We calculated from semi‐empirical models and directly estimated it from tracer measurements. We fixed at the median value from these calculations (0.5 ), and used maximum likelihood to estimate reach‐scale, open‐channel metabolism. Both gross primary production (GPP) and ecosystem respiration (ER) were high (GPP range: 0.3–30.8 g , ER range: 0.8–30.6 g ), with peak GPP and ER occurring in the late summer or early fall. GPP increased exponentially with temperature, consistent with metabolic theory, while light was seasonally saturating. Annual average GPP, estimated at 1500 g carbon , was in the top 2% of estimates for other rivers. GPP and ER were tightly coupled and 90% of GPP was immediately respired, resulting in net ecosystem production near 0. Patterns in the Hanford Reach contrast with those in small‐medium rivers, suggesting that metabolism magnitudes and patterns in large rivers may not be simply scaled from knowledge of smaller rivers.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Using a Genetic Algorithm to Optimize Configurations in a Data-Driven Application

Users of highly-configurable software systems often want to optimize a particular objective such as improving a functional outcome or increasing system performance. One approach is to use an evolutionary algorithm. However, many applications today are data-driven, meaning they depend on inputs or data which can be complex and varied. Hence, a search needs to be run (and re-run) for all inputs, making optimization a heavy-weight and potentially impractical process. In this paper, we explore this issue on a data-driven highly-configurable scientific application. We build an exhaustive database containing 3,000 configurations and 10,000 inputs, leading to almost 100 million records as our oracle, and then run a genetic algorithm individually on each of the 10,000 inputs. We ask if (1) a genetic algorithm can find configurations to improve functional objectives; (2) whether patterns of best configurations over all input data emerge; and (3) if we can we use sampling to approximate the results. We find that the original (default) configuration is best only 34% of the time, while clear patterns emerge of other best configurations. Out of 3,000 possible configurations, only 112 distinct configurations achieve the optimal result at least once across all 10,000 inputs, suggesting the potential for lighter weight optimization approaches. We show that sampling of the input data finds similar patterns at a lower cost.

Sinha, Urjoshi↗
DOE OSTI2023

A guide to diagnosing colored resonances at hadron colliders

We present a comprehensive study on how to distinguish the properties of heavy dijet resonances at hadron colliders. A variety of spins, chiral couplings, charges, and QCD color representations are considered. Distinguishing the different color representations is particularly difficult at hadron colliders. To determine the QCD color structure, we consider a third jet radiated in a resonant dijet event. We show that the relative rates of three-jet versus two-jet processes are sensitive to the color representation of the resonance. We also show analytically that the antennae radiation pattern of soft radiation depends on the color structure of dijet events and develops an observable that is sensitive to the antennae patterns. Finally, we exploit a Convolutional Neural Network with Machine Learning techniques to differentiate the radiation patterns from different colored resonances and find encouraging results to discriminate them. We demonstrate our results numerically at a 14 TeV LHC, and the methodology presented here should be applicable to other future hadron colliders.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Wintertime Arctic Oscillation and North Atlantic Oscillation and their impacts on the Northern Hemisphere climate in E3SM

The characteristics of the wintertime Arctic Oscillation (AO) and North Atlantic Oscillation (NAO) and their impacts on climate variability over the Northern Hemisphere are important metrics for evaluating a climate system model. Observational analyses reveal that the horizontal and vertical structures in the AO and NAO exhibit a meridional dipole and a large-scale barotropic pattern between the Arctic and mid-latitudes. Historical model simulations from the Energy Exascale Earth System Model (E3SM-HIST) are used to identify how well it captures these major climate modes. It is found that the simulated AO and NAO modes have spatial structures similar to the observed features. In addition, the observed frequency bands in the AO and NAO-related time variability are captured well in the E3SM-HIST simulation. Associated with the positive phase in wintertime AO and NAO, zonal flow and warm advection in mid-latitude continents are enhanced, along with stronger cold flow from enhanced northerly winds over high latitudes. These features are linked to the atmospheric circulation pattern reflected by lower SLP anomalies over the Arctic and higher SLP anomalies over the mid-latitudes. In E3SM-HIST, these spatial associations and main structural features are analogous to those in observations. In the time-height evolution related to winter AO and NAO modes, it can also be seen that the simulations reproduce the downward propagating patterns in observations. Nevertheless, the vertical structures associated with AO and NAO in E3SM-HIST exhibit substantial biases in the lower stratosphere. The cause of these stratospheric biases is investigated using the strength of climatological stratospheric polar vortex (SPV) and wave activity fluxes. The results herein suggest that E3SM-HIST has a reasonable skill in reproducing the observed characteristics related to the winter AO and NAO, although there exist systematic biases in the associated climate variability.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Global teleconnections influencing large-scale drought in the United States using SVDI

Understanding recent large-scale drought patterns and the mechanisms producing extreme drought events is vital for future drought forecasts and understanding future drought risks. Increasingly, vapor pressure deficit (VPD) has been used as an important measure of evaporative demand and proxy for drought detection. In this study, VPD is used to calculate the new Standardized VPD Drought Index (SVDI) with NASA North American Land Data Assimilation System (NLDAS) data. Previous studies have shown that SVDI accurately identifies the timing and magnitude short-term droughts in the United States (U.S). In the present study, SVDI is now used to identify large-scale drought patterns between 1980 and 2021 and drought variability driven by selected global teleconnections originating in the Pacific and Atlantic Oceans. Spatial drought characteristics were extracted from SVDI using empirical orthogonal function (EOF) analysis. Then a k-means clustering algorithm was applied to both EOF principal components and primary teleconnections, including the El Nino-Southern Oscillation (ENSO) and Pacific Decadal Oscillation (PDO) to identify drought events driven by the Pacific Ocean. Results show that the SVDI is useful in evaluating large-scale drought variability in the U.S. related to global teleconnections, and that mechanisms influencing summer drought patterns in the Western and Southwestern U.S. are driven by a tropical-extratropical interactions originating in the equatorial Pacific Ocean related to ENSO dynamics with interdecadal variability modulated by PDO. The large-scale droughts in the Central and Southern U.S., like those in 2011 and 2012, on the other hand, are driven by the North Pacific Ocean warm pool during a strong negative PDO, which subsequently influenced variability in the Bermuda-Azores High in the Atlantic Ocean. In summer 2011, the Bermuda-Azores High weakened, reducing the onshore winds and moisture transport along the eastern Gulf of Mexico and contributing to ongoing drought in the region. The Northern Pacific and Atlantic Ocean sea surface temperatures (SSTs) have increased between 1980 and 2021. In conclusion, as SSTs continue to rise in the Northern Pacific Ocean, one consequence of the coupled North Pacific warm pool and atmospheric dynamics, is to increase summer drought variability over a large region in the southern and midwestern U.S. under global warming.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Understanding long-term groundwater flow at Pahute Mesa and vicinity, Nevada National Security Site, USA, from naturally occurring geochemical and isotopic tracers

Abstract Recently collected naturally occurring geochemical and isotopic groundwater tracers were combined with historic data from the Pahute Mesa area of the Nevada National Security Site (NNSS), Nevada, USA, to provide insights into long-term regional groundwater flow patterns, mixing and recharge. Pahute Mesa was the site of 85 nuclear detonations between 1965 and 1992, many of them deeply buried devices that introduced radionuclides directly into groundwater. The dataset examined included major ions and field measurements, stable isotopes of hydrogen (δ 2 H), oxygen (δ 18 O), carbon (δ 13 C) and sulfur (δ 34 S), and radioisotopes of carbon ( 14 C) and chloride ( 36 Cl). Analysis of the patterns of groundwater 14 C data and the δ 2 H and δ 18 O signatures indicates that groundwater recharge is predominantly of Pleistocene age, except for a few localized areas near major ephemeral drainages. Steep gradients in sulfate (SO 4 ) and chloride (Cl) define a region near the western edge of the NNSS where high-concentration groundwater flowing south from north of the NNSS merges with dilute groundwater flowing west from eastern Pahute Mesa in a mixing zone that coincides with a groundwater trough associated with major faults. The 36 Cl/Cl and δ 34 S data suggest that the source of the high Cl and SO 4 in the groundwater was a now-dry, pluvial-age playa lake north of the NNSS. Patterns of groundwater flow indicated by the combined data sets show that groundwater is flowing around the northwest margin of the now extinct Timber Mountain Caldera Complex toward regional discharge areas in Oasis Valley.

58 GEOSCIENCES↗
DOE OSTI2024

Plasticity-mediated deformation instabilities in thin film-compliant substrate systems: direct three-dimensional simulations

Abstract Surface wrinkles driven by mechanical instability commonly form in thin-film structures attached to a compliant substrate. In this study, a recently developed computational approach is employed to simulate the formation and transformation of wrinkles involving plastic yielding of the thin film. The three-dimensional (3D) finite element models contain an embedded imperfection at the film-substrate interface, serving to trigger the bifurcation modes. Successful application of this technique to allow for film plasticity is demonstrated, including the evolution of 3D surface patterns and their correlation with the overall load–displacement response. The simulations reveal that plastic yielding transforms the surface instability patterns into more localized forms. Under uniaxial loading, the sinusoidal elastic wrinkles undergo the wrinkle-to-fold transition. With equi-biaxial loading, the initial square-checkerboard array turns into continuous tall ridges along the 45° directions. In both loading modes, the plasticity-induced instability patterns are only partially relieved upon unloading, leaving permanent features on the surface.

36 MATERIALS SCIENCE↗
DOE OSTI2025

An Internal Digital Image Correlation Technique for High-Strain Rate Dynamic Experiments

Full-field, quantitative visualization techniques, such as digital image correlation (DIC), have unlocked vast opportunities for experimental mechanics. However, DIC has traditionally been a surface measurement technique, and has not been extended to perform measurements on the interior of specimens for dynamic, full-scale laboratory experiments. This limitation restricts the scope of physics which can be investigated through DIC measurements, especially in the context of heterogeneous materials. The focus of this study is to develop a method for performing internal DIC measurements in dynamic experiments. The aim is to demonstrate its feasibility and accuracy across a range of stresses (up to 650 MPa), strain rates (10 3 - 10 6 s -1 ), and high-strain rate loading conditions (e.g., ramped and shock wave loading). Internal DIC is developed based on the concept of applying a speckle pattern at an inner-plane of a transparent specimen. The high-speed imaging configuration is coupled to the traditional dynamic experimental setups, and is focused on the internal speckle pattern. During the experiment, while the sample deforms dynamically, in-plane, two-dimensional deformations are measured via correlation of the internal speckle pattern. In this study, the viability and accuracy of the internal DIC technique is demonstrated for split-Hopkinson (Kolsky) pressure bar (SHPB) and plate impact experiments. The internal DIC experimental technique is successfully demonstrated in both the SHPB and plate impact experiments. In the SHPB setting, the accuracy of the technique is excellent throughout the deformation regime, with measurement noise of approximately 0.2% strain. In the case of plate impact experiments, the technique performs well, with error and measurement noise of 1% strain. The internal DIC technique has been developed and demonstrated to work well for full-scale dynamic high-strain rate and shock laboratory experiments, and the accuracy is quantified. Here, the technique can aid in investigating the physics and mechanics of the dynamic behavior of materials, including local deformation fields around dynamically loaded material heterogeneities.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Using yttrium as an indicator to estimate total rare earth element concentration: a case study of anthracite-associated clays from northeastern Pennsylvania

Abstract This study demonstrated using yttrium (Y) as an indicator to estimate the total rare earth element and Y contents (REY) in coal-associated samples and to facilitate selection of samples with high REY assays in a fast and inexpensive manner. More than 10 anthracite-associated samples were collected from each of three Pennsylvanian sites (sites B, J and C) based on Thorium gamma ray logging suggesting high REY content. Several samples from each site were analyzed by ICP-MS to determine the rare earth distribution patterns and to establish the site-specific linear equations of Y and REY. The Y contents of the remaining samples were measured by a portable X-ray fluorescence analyzer, and the REY values were estimated based on the site-specific linear equation developed earlier. R-squared values above 0.70 were obtained for all the estimation equations from all three sites on both a whole sample basis and an ash basis. Previously, ash content has been widely used as an indicator of high REY content. This may not be applicable for a specific site. Site B in this study is an example where ash contents could not be statistically correlated with REY, so using Y for estimation is more applicable. The demonstrated sample screening process is suitable for samples from sites that share more similar distribution patterns (either MREY or LREY or HREY) as well as for samples from sites that share multiple distribution patterns (LREY/MREY/HREY) depending on the desirable accuracy. The demonstrated process lowers the analytical cost from $70 to 80 dollars per sample to $10–15 per sample while significantly reducing the processing time and acid consumption for ICP digestion. This is particularly true when a relatively large sample size is involved, for example, 100 samples from one site analyzed by ICP-MS/OES.

Yang, Xiaojing↗
DOE OSTI2024

Path-Integrated X-Ray Digital Image Correlation using Synthetic Reference Images

X-rays can provide images when an object is visibly obstructed, allowing for motion measurements via x-ray digital image correlation (DIC). However, x-ray images are path-integrated and contain data for all objects between the source and detector. If multiple objects are present in the x-ray path, conventional DIC algorithms may fail to correlate the x-ray images. A new DIC algorithm called path-integrated (PI)-DIC addresses this issue by reformulating the matching criterion for DIC to account for multiple, independently-moving objects. PI-DIC requires a set of reference x-ray images of each independent object. However, due to experimental constraints, such reference images might not be obtainable from the experiment. Here, this work focuses on the reliability of synthetically-generated reference images, in such cases. A simplified exemplar is used for demonstration purposes, consisting of two aluminum plates with tantalum x-ray DIC patterns undergoing independent rigid translations. Synthetic reference images based on the “as-designed” DIC patterns were generated. However, PI-DIC with the synthetic images suffered some biases due to manufacturing defects of the patterns. A systematic study of seven identified defect types found that an incorrect feature diameter was the most influential defect. Synthetic images were re-generated with the corrected feature diameter, and PI-DIC errors were improved by a factor of 3-4. Final biases ranged from 0.00-0.04 px, and standard uncertainties ranged from 0.06-0.11 px. In conclusion, PI-DIC accurately measured the independent displacement of two plates from a single series of path-integrated x-ray images using synthetically-generated reference images, and the methods and conclusions derived here can be extended to more generalized cases involving stereo PI-DIC for arbitrary specimen geometry and motion. This work thus extends the application space of x-ray imaging for full-field DIC measurements of multiple surfaces or objects in extreme environments where optical DIC is not possible.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Statistical analysis of spatial distribution of pores in metal additive manufacturing

We report mechanical properties of additively manufactured parts are sensitive to the presence of pores form during the manufacturing process. The impact of pores on the mechanical performance has been investigated extensively with respect to different parameters, such as pore volume fraction, shape, and size. However, statistical investigations focusing on the relationships between the spatial distribution of pores and process parameters; and consequently, the performance of the manufactured parts are scattered and limited. Also, these sparse investigations usually suffer from an ambiguous definition of terminologies. For instance, the required criteria to consider a point pattern as complete spatial randomness (CSR) are generally not clarified. Moreover, no numerical formalism is yet developed to show how much the observed spatial results are statistically significant. To address these shortcomings, the statistical definition of CSR in a point pattern and the procedure to quantitatively determine the deviation of a pattern from CSR were discussed. The explained statistical approach was used to investigate the effect of scanning speed parameter on the spatial distribution of gas pores in laser powder bed fusion manufactured stainless steel parts. Furthermore, and to highlight the impact of the spatial distribution of pores on mechanical properties, fatigue performances of parts with clustered and randomly distributed pores were simulated by finite element analysis. It is shown that by reducing the scanning speed, the spatial distribution of gas pores deviated more from CSR, and correspondingly fatigue performance deteriorated.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Use of wire grid polarizers with liquid crystal display for large-volume stereolithography

Spatial light modulators that use liquid crystal devices (LCDs) to pattern ultraviolet light for vat polymerization suffer from a few limitations: limited range of wavelengths that can be patterned, low damage threshold for incoming light, and low efficiency of light transmission. A monochrome LCD can more efficiently transmit useful wavelengths of light for stereolithography (365–405 nm) than a color LCD, but it still contains two absorptive film polarizers that suffer from the aforementioned limitations. Wire grid polarizers reflect rather than absorb the blocked polarizations of light, resulting in a higher intensity damage threshold. They can also polarize lower wavelength light that is limited only by the wire pitch. In this work, this research investigates the effects of replacing an LCD’s film polarizers with wire grid polarizers to enable polarization and patterning of high intensity UV light, resulting in shorter curing times and the ability to print a wider range of stereolithography feedstocks.

42 ENGINEERING↗