Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “neutral model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Miniaturized Ion and Neutral Mass Spectrometer for CubeSat Atmospheric Measurements

To increase the number of single point in-situ measurements of thermosphere and exosphere ion and neutral composition and density, miniaturized instrumentation is in high demand to take advantage of the increasing platform opportunities available in the smallsat/cubesat industry. The INMS (Ion-Neutral Mass Spectrometer) addresses this need by providing simultaneous measurements of both the neutral and ion environment, essentially providing two instruments in one compact model. The 1.3U volume, 570 gram, 1.8W nominal power INMS instrument makes implementation into cubesat designs (3U and above) practical and feasible. With high dynamic range (0.1-500eV), mass dynamic range of 1-40amu, sharp time resolution (0.1s), and mass resolution of MdM16, the INMS instrument addresses the atmospheric science needs that otherwise would have required larger more expensive instrumentation. INMS-v1 (version 1) launched on Exocube (CalPoly 3U cubesat) in 2015 and INMS-v2 (version 2) is scheduled to launch on Dellingr (GSFC 6U cubesat) in 2017. New versions of INMS are currently being developed to increase and add measurement capabilities, while maintaining its smallsat/cubesat form.

science↗
NASA NTRS2018

ENSO Related Inter-Annual Lightning Variability from the Full TRMM LIS Lightning Climatology

The El Nino/Southern Oscillation (ENSO) contributes to inter-annual variability of lightning production more than any other atmospheric oscillation. This study further investigated how ENSO phase affects lightning production in the tropics and subtropics using the Tropical Rainfall Measuring Mission (TRMM) Lightning Imaging Sensor (LIS). Lightning data were averaged into mean annual warm, cold, and neutral 'years' for analysis of the different phases and compared to model reanalysis data. An examination of the regional sensitivities and preliminary analysis of three locations was conducted using model reanalysis data to determine the leading convective mechanisms in these areas and how they might respond to the ENSO phases

enso↗
NASA NTRS2020

A Broad-Band X-Ray Spectral Study of the Seyfert 1 Galaxy ESO 141–G055 with XMM-Newton and NuSTAR

We have extensively studied the broad–band X-ray spectra of the source ESO 141–G055 using all available XMM–Newton and NuSTAR observations. We detect a prominent soft excess below 2 keV, a narrow Fe line, and a Compton hump (> 10 keV). The origin of the soft excess is still debated. We used two models to describe the soft excess: the blurred reflection from the ionized accretion disc and the intrinsic thermal Comptonization model. We find that both of these models explain the soft excess equally well. We confirm that we do not detect any broad Fe line in the X-ray spectra of this source, although both the physical models prefer a maximally spinning black hole scenario (a > 0.96). This may mean that either the broad Fe line is absent or blurred beyond detection. The Eddington rate of the source is estimated to be λ(sub Edd) ∼ 0.31. In the reflection model, the Compton hump has a contribution from both ionized and neutral reflection components. The neutral reflector which simultaneously describes the narrow Fe K(sub α) and the Compton hump has a column density of N(sub H) ≤ 7 × 10(exp 24) cm(exp -2). In addition, we detect a partially covering ionized absorption with ionization parameter log ξ/ erg cm s(exp -1) = 0.1(sup +0.1)(sub -0.1) and column density N(sub H) = 20.6(sup +1.0)(sub -1.0) × 10(exp 22) cm(exp -2) with a covering factor of 0.21(sup +0.01)(sub -0.01).

ESO 141–G055↗
DOE OSTI2026

Enhancing New Physics Searches with a Future Beam Dump Configuration at SBND

Accelerator-based neutrino experiments, especially those with high-intensity beams and highly capable detectors, offer a powerful and complementary method for probing new physics scenarios. The MiniBooNE experiment at Fermilab pioneered a special Booster Neutrino Beam (BNB) beam dump run and set new limits on sub-GeV dark matter. This white paper explores the physics opportunities enabled by operating the Short-Baseline Near Detector (SBND) at Fermilab in a future BNB beam dump configuration. Redirecting the proton beam away from the default target suppresses neutrino backgrounds, enabling SBND to significantly enhance sensitivity to many new physics scenarios. We evaluate two operational scenarios – off-target mode and a new dedicated beam dump mode – and demonstrate that both approaches can open new avenues in the search for physics beyond the Standard Model. We present two example cases, scalar dark matter and heavy neutral leptons via axion-like particle.

Dutta, Bhaskar [TAMU, College Station]↗
DOE OSTI2021

Assessing boundary condition and parametric uncertainty in numerical-weather-prediction-modeled, long-term offshore wind speed through machine learning and analog ensemble

To accurately plan and manage wind power plants, not only does the time-varying wind resource at the site of interest need to be assessed but also the uncertainty connected to this estimate. Numerical weather prediction (NWP) models at the mesoscale represent a valuable way to characterize the wind resource offshore, given the challenges connected with measuring hub-height wind speed. The boundary condition and parametric uncertainty associated with modeled wind speed is often estimated by running a model ensemble. However, creating an NWP ensemble of long-term wind resource data over a large region represents a computational challenge. Here, we propose two approaches to temporally extrapolate wind speed boundary condition and parametric uncertainty using a more convenient setup in which a mesoscale ensemble is run over a short-term period (1 year), and only a single model covers the desired long-term period (20 year). We quantify hub-height wind speed boundary condition and parametric uncertainty from the short-term model ensemble as its normalized across-ensemble standard deviation. Then, we develop and apply a gradient-boosting model and an analog ensemble approach to temporally extrapolate such uncertainty to the full 20-year period, for which only a single model run is available. As a test case, we consider offshore wind resource characterization in the California Outer Continental Shelf. Both of the proposed approaches provide accurate estimates of the long-term wind speed boundary condition and parametric uncertainty across the region (R 2 >0.75), with the gradient-boosting model slightly outperforming the analog ensemble in terms of bias and centered root-mean-square error. At the three offshore wind energy lease areas in the region, we find a long-term median hourly uncertainty between 10 % and 14 % of the mean hub-height wind speed values. Finally, we assess the physical variability in the uncertainty estimates. In general, we find that the wind speed uncertainty increases closer to land. Also, neutral conditions have smaller uncertainty than the stable and unstable cases, and the modeled wind speed in winter has less boundary condition and parametric sensitivity than summer.

17 WIND ENERGY↗
NASA NTRS2008

Wear Mechanisms in Electron Sources for Ion Propulsion, 1: Neutralizer Hollow Cathode

Upon the completion of two long-duration life tests of a 30-cm ion engine, the orifice channel of the neutralizer hollow cathode was eroded away to as much as twice its original diameter. Whereas the neutralizer cathode orifice opened significantly, no noticeable erosion of the discharge cathode orifice was observed. Noquantitative explanation of these erosion trends has been established since the completion of the two life tests. A two-dimensional model of the partially ionized gas inside these devices has been developed and applied to the neutralizer hollow cathode. The numerical simulations show that the main mechanism responsible for the channel erosion is sputtering by Xe+. These ions are accelerated by the sheath along the channel and bombard the surface with kinetic energy/charge of about 17 V at the beginning of cathode life. The density of the ions inside the neutralizer orifice is computed to be as high as 2.1 x 10(sup 22) m(sup -3). Because of the 3.5-times larger diameter of the discharge cathode orifice, the ion density inside the orifice is more than 40 times lower and the sheath drop 7 V lower compared with the values in the neutralizer. At these conditions, Xe+ can cause no significant sputtering of the surface.

ionized gas↗
NASA NTRS1989

Thermospheric dynamics during September 18-19, 1984. I - Model simulations

The September 18-19, 1984 Equinox Transient Study (ETS) interval was simulated using the National Center for Atmospheric Research thermospheric GCM with inputs guided by observations. High-latitude forcings for the model were defined with precision for this period. The importance of upward-propagating semidiurnal tides is emphasized, the first-realistic time-dependent simulation to incorporate such tides. A description of the simulated quiet time thermospheric structure for September 18 is contrasted with the storm time behavior of September 19. Several features of the storm response are described, including the generation of large-scale equatorward propagating disturbances. Longer-lived perturbations of the neutral temperature and composition are also discussed. A new feature discovered in the model predictions for altitudes around 200 km comprises a quasi-fixed, four-cell pattern of high-and low-density regions in the polar cap.

Crowley, G.↗
DOE OSTI2026

An implicit-explicit time splitting strategy for the far SOL plasma fluid model with DG-FEM discretization

We consider a far scrape-off layer (SOL) plasma fluid model of ions that is governed by a Braginskiitype model: a one-dimensional, nonlinear system of advection-diffusion equations coupled with a diffusion equation for neutral particles. Our motivation for studying this system arises from the coupling between the edge plasma and radio-frequency (RF) heating, where solving a far SOL plasma fluid model provides critical insights into edge plasma dynamics. Numerical simulations of plasma fluid models require advanced computational techniques to achieve both efficiency and accuracy, especially when resolving the boundary layer in magnetically confined plasmas. In this work, we propose an implicit-explicit time operator splitting strategy that allows for an efficient solution algorithm, where the diffusive terms are treated semi-implicitly requiring only a linear solve, while the advection part is handled explicitly using a strong-stability-preserving Runge-Kutta (SSP-RK3) scheme. This leads to a fully decoupled system in which the diffusion and advection sub-problems can be solved separately, simplifying the overall solution procedure and allowing for efficient parallelization, which is particularly relevant for exploring the impact of RF heating on the SOL plasma. The main challenge of the discretization is due to the strong coupling between diffusion and advection, particularly through the boundary conditions. This makes implementation of such a scheme in an accurate and stable manner nontrivial. We discuss in detail how to split the equations and manage boundary conditions to maintain stability and well-posedness for each subsystem. We also describe a spatial discretization approach, based on the discontinuous Galerkin finite element method (DG-FEM) and present numerical results for a one-dimensional system.

Burkovska, Olena [ORNL] (ORCID:0000000163101130)↗
DOE OSTI2020

A Virtual Space Vector Model Predictive Control for a Seven-Level Hybrid Multilevel Converter

This paper proposes a virtual space vector (VSV) model predictive control (MPC) for a three-phase seven-level (7L) hybrid multilevel converter (HMC), where each phase consists of an active-neutral-point-clamped converter with a floating H-bridge. To achieve the best current tracking, which is the primary goal of the proposed algorithm, a novel geometrical positioning approach is proposed to select the optimal voltage vector among all the realspace vectors and VSVs. Then, all the possible switching sequences that belong to the optimal voltage vector are evaluated to realize the dc capacitor voltage balancing and common-mode voltage reduction. Through an external modulator, the optimal voltage vector can be synthesized by using either one-, three-, or seven-segment switching sequence. Compared with the conventional MPC, the proposed VSV-MPC can reduce not only the computational burden but also the current THD. Both simulation and experimental results obtained on silicon carbide based 7L-HMC prototype are presented to validate the feasibility and effectiveness of the proposed VSVMPC strategy.

42 ENGINEERING↗
NASA NTRS1998

Simulation of Etching Profiles Using Level Sets

Using plasma discharges to etch trenches and via holes in substrates is an important process in semiconductor manufacturing. Ion enhanced etching involves both neutral fluxes, which are isotropic, and ion fluxes, which are anisotropic. The angular distributions for the ions determines the degree of vertical etch, while the amount of the neutral fluxes determines the etch rate. We have developed a 2D profile evolution simulation which uses level set methods to model the plasma-substrate interface. Using level sets instead of traditional string models avoids the use of complicated delooping algorithms. The simulation calculates the etch rate based on the fluxes and distribution functions of both ions and neutrals. We will present etching profiles of Si substrates in low pressure (10s mTorr) Ar/Cl2 discharges for a variety of incident ion angular distributions. Both ion and neutral re-emission fluxes are included in the calculation of the etch rate, and their contributions to the total etch profile will be demonstrated. In addition, we will show RIE lag effects as a function of different trench aspect ratios. (For sample profiles, please see http://www.ipt.arc.nasa.gov/hwangfig1.html)

Hwang, Helen↗
NASA NTRS2005

Neutral Atmospheric Influences of the Solar Proton Events in October-November 2003

The large solar storms in October-November 2003 caused solar proton events (SPEs) at the Earth and impacted the middle atmospheric polar cap regions. Although occurring near the end of the maximum of solar cycle 23, the fourth largest period of SPES measured in the past 40 years happened 28-31 October 2003. The highly energetic protons associated with the SPEs produced ionizations, excitations, dissociations, and dissociative ionizations of the background constituents, which led to the production of odd hydrogen (HO(sub x)) and odd nitrogen (NO(sub y)). NO(sub x) (NO + NO2) was observed by the UARS HALOE instrument to increase over 20 ppbv throughout the Southern Hemisphere polar lower mesosphere. The NOAA 16 SBUV/2 instrument measured a short-term ozone depletion of 40% in the Southern Hemisphere polar lower mesosphere, probably a result of the HO(sub x) increases. SBUV/2 observations showed ozone depletions of 5-8% in the southern polar upper stratosphere lasting days beyond the events, most likely a result of the NO(sub y) enhancements. Longer-term Northern Hemisphere polar total ozone decreases of >0.5% were predicted to last for over 8 months past the events with the Goddard Space Flight Center two-dimensional model. Although the production of NO(sub y) constituents is the same in both hemispheres, the NO(sub y) constituents have a much larger impact in the northern than the southern polar latitudes because of the seasonal differences between the two hemispheres. These observations and model computations illustrate the substantial impact of solar protons on the polar neutral middle atmosphere.

Jackman, Charles H.↗
DOE OSTI2023

Modeling plasma-induced surface charge effects on CO 2 activation by single atom catalysts supported on reducible and irreducible metal oxides

Abstract The accumulation of negative surface charge on catalytic surfaces in the presence of low-temperature plasma (LTP) could influence catalytic performance. However, it is difficult to disentangle the role of surface charging and other LTP catalytic effects in experiment. Herein, we use density functional theory (DFT) modeling to understand the effect of plasma-induced surface charging on CO 2 activation by atomically dispersed single atom (SA) catalysts on both reducible and irreducible metal oxide supports. We model CO 2 adsorption strength and CO 2 dissociation barriers for Co 1 , Ni 1 , Cu 1 , Rh 1 , Pd 1 , and Ag 1 SAs on both reducible and irreducible supports, namely, CeO 2 (100), TiO 2 (101), and γ -Al 2 O 3 (110), to elucidate trends. We find that accumulated surface charge on the SA increases the CO 2 adsorption strength and decreases the CO 2 dissociation barrier for all studied SA/support combinations. For both charged and uncharged (neutral) systems, SAs on the reducible CeO 2 (100) support generally adsorb CO 2 more weakly compared to when on irreducible supports like γ -Al 2 O 3 (110). SAs on γ -Al 2 O 3 (110) typically have larger barriers for CO 2 dissociation for both charged and uncharged systems compared to TiO 2 (101) and CeO 2 (100). The magnitude of surface charging effects on CO 2 binding energies and dissociation barriers depends sensitively on both the SA and the support. In some cases, the CO 2 activation trends qualitatively change between neutral and charged systems for a fixed SA across different supports. This DFT modeling study demonstrates that surface charging should be considered in strong electric fields because it can have a large effect on molecule adsorption and bond-breaking on catalytic surfaces.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1992

EnviroNET: An on-line environment data base for LDEF data

EnviroNET is an on-line, free form data base intended to provide a centralized depository for a wide range of technical information on environmentally induced interactions of use to Space Shuttle customers and spacecraft designers. It provides a user friendly, menu driven format on networks that are connected globally and is available twenty-four hours a day, every day. The information updated regularly, includes expository text, tabular numerical data, charts and graphs, and models. The system pools space data collected over the years by NASA, USAF, other government facilities, industry, universities, and ESA. The models accept parameter input from the user and calculate and display the derived values corresponding to that input. In addition to the archive, interactive graphics programs are also available on space debris, the neutral atmosphere, radiation, magnetic field, and ionosphere. A user friendly informative interface is standard for all the models with a pop-up window, help window with information on inputs, outputs, and caveats. The system will eventually simplify mission analysis with analytical tools and deliver solution for computational intense graphical applications to do 'What if' scenarios. A proposed plan for developing a repository of LDEF information for a user group concludes the presentation.

Lauriente, Michael↗
DOE OSTI2025

Utilizing Machine Learning to Improve Neutralization Potency of an HIV-1 Antibody Targeting the gp41 N-Heptad Repeat

The N-heptad repeat (NHR) of the HIV-1 gp41 prehairpin intermediate (PHI) is an attractive potential vaccine target with high sequence conservation across diverse strains. However, despite the potency of NHR-targeting peptides and clinical efficacy of the NHR-targeting entry inhibitor enfuvirtide, no potently neutralizing NHR-directed monoclonal antibodies (mAbs) nor antisera have been identified or elicited to date. The lack of potent NHR-binding mAbs both dampens enthusiasm for vaccine development efforts at this target and presents a barrier to performing passive immunization experiments with NHR-targeting antibodies. To address this challenge, we previously developed an improved variant of the NHR-directed mAb D5, called D5_AR, which is capable of neutralizing diverse tier-2 viruses. Building on that work, here we present the 2.7Å-crystal structure of D5_AR bound to NHR mimetic peptide IQN17. We then utilize protein language models and supervised machine learning to generate small (n < 100) libraries of D5_AR variants that are subsequently screened for improved neutralization potency. We identify a variant with 5-fold improved neutralization potency, D5_FI, which is the most potent NHR-directed monoclonal antibody characterized to date and exhibits broad neutralization of tier-2 and −3 pseudoviruses as well as replicating R5 and X4 challenge strains. Additionally, our work highlights the ability of protein language models to efficiently identify improved mAb variants from relatively small libraries.

Biopolymers↗
NASA NTRS1994

A new approach for determining fully empirical altimeter wind speed model functions

A statistical technique is developed for determining fully empirical model functions relating altimeter backscatter (sigma(sub 0)) measurements to near-surface neutral stability wind speed. By assuming that sigma(sub 0) varies monotonically and uniquely with wind speed, the method requires knowledge only of the separate, rather than joint distribution functions of sigma(sub 0) and wind speed. Analytic simplifications result from using a Weibull distribution to approximate the global ocean wind speed distribution; several different wind data sets are used to demonstrate the validity of the Weibull approximation. The technique has been applied to 1 year of Geosat data. Validation of the new and historical model functions using an independent buoy data set demonstrates that the present model function not only has small overall bias and root mean square (RMS) errors, but yields smaller systematic error trends with wind speed and pseudowave age than previously published models. The present analysis suggests that generally accuracte altimeter model functions can be derived without the use of colocated measurements, nor is additional significant wave height information measured by the altimeter necessary.

Freilich, M. H.↗
NASA NTRS2019

Model for the Increase in Thruster Efficiency from Cross-Channel Coupling in Nested Hall Thrusters

Multi-channel operation in nested Hall thrusters has been experimentally shown to enhance thruster efficiency compared to single-channel operation at constant power. This is the result of higher local neutral density due to the flow from adjacent channels, leading to two effects: neutral ingestion and decreased plume divergence. Analytical expressions for the impact of these cross-channel effects on efficiency are derived for a nested Hall thruster based on the flow of neutrals between channels. These expressions are dependent on the geometry and operation of a given thruster, as well as its performance in single-channel operation. The mass utilization efficiency increase from cross-channel neutrals is found to be primarily driven by the distance between adjacent channels. A comparison of the model predictions of efficiency to experiment also shows agreement within uncertainty. These results are discussed in the context of best practices for nested Hall thruster channel testing and optimal thruster design.

Nested Hall Thruster↗
DOE OSTI2026

Fluid-kinetic modeling of a high power density radio frequency inductively coupled positive hydrogen ion source

High power density radio-frequency (RF) inductively coupled positive ion sources are attractive candidates for next-generation neutral beam injection (NBI) systems, where higher injected power and longer pulse lengths are desired without sacrificing source reliability. Operating at absorbed power densities of order $\gt 1~\mathrm{W\,cm}^{-3}$ places these sources in a regime with stronger gas heating, higher dissociation, and non-Maxwellian electron energy distributions. The Large Uniform Plasma for Ionizing Neutrals (LUPIN) is an RF inductively coupled plasma source designed to explore this high power density regime and to provide guidance for a positive ion source upgrade for the DIII-D NBI system. LUPIN is designed to operate at up to 20 kW of RF power at 2 MHz, coupling energy through a cylindrical quartz vessel to achieve target ion current densities of $2100\,\mathrm{A\,m}^{-2}$ . This paper presents fluid-kinetic modeling of LUPIN using the hybrid plasma equipment model where electrons are treated kinetically, and the simulations reveal that electron energy distribution function transitions from nearly Maxwellian in the core to bi-Maxwellian towards the edge. Parametric simulations investigate the effects of RF power, gas pressure, and frequency on plasma density, ion flux, and uniformity. Parametric sweeps reveal that increasing power shifts the primary ionization channel from molecular to atomic with diminishing flux gains due to skin-depth contraction and gas rarefaction. Higher frequency localizes heating and increases $\mathrm{H}_2^+$ and $\mathrm{H}_3^+$ delivery to the grid, while elevated pressure boosts ionization yet hinders ion transport due to increase in collisionality.

inductively coupled plasma↗
DOE OSTI2022

Nonlinear burn control in ITER using adaptive allocation of actuators with uncertain dynamics

Abstract ITER will be the first tokamak to sustain a fusion-producing, or burning, plasma. If the plasma temperature were to inadvertently rise in this burning regime, the positive correlation between temperature and the fusion reaction rate would establish a destabilizing positive feedback loop. Careful regulation of the plasma’s temperature and density, or burn control, is required to prevent these potentially reactor-damaging thermal excursions, neutralize disturbances and improve performance. In this work, a Lyapunov-based burn controller is designed using a full zero-dimensional nonlinear model. An adaptive estimator manages destabilizing uncertainties in the plasma confinement properties and the particle recycling conditions (caused by plasma–wall interactions). The controller regulates the plasma density with requests for deuterium and tritium particle injections. In ITER-like plasmas, the fusion-born alpha particles will primarily heat the plasma electrons, resulting in different electron and ion temperatures in the core. By considering separate response models for the electron and ion energies, the proposed controller can independently regulate the electron and ion temperatures by requesting that different amounts of auxiliary power be delivered to the electrons and ions. These two commands for a specific control effort (electron and ion heating) are sent to an actuator allocation module that optimally maps them to the heating actuators available to ITER: an electron cyclotron heating system (20 MW), an ion cyclotron heating system (20 MW), and two neutral beam injectors (16.5 MW each). Two different actuator allocators are presented in this work. The first actuator allocator finds the optimal mapping by solving a convex quadratic program that includes actuator saturation and rate limits. It is nonadaptive and assumes that the mapping between the commanded control efforts and the allocated actuators (i.e. the effector model) contains no uncertainties. The second actuator allocation module has an adaptive estimator to handle uncertainties in the effector model. This uncertainty includes actuator efficiencies, the fractions of neutral beam heating that are deposited into the plasma electrons and ions, and the tritium concentration of the fueling pellets. Furthermore, the adaptive allocator considers actuator dynamics (actuation lag) that contain uncertainty. This adaptive allocation algorithm is more computationally efficient than the aforementioned nonadaptive allocator because it is computed using dynamic update laws so that finding the solution to a static optimization problem is not required at every time step. A simulation study assesses the performance of the proposed adaptive burn controller augmented with each of the actuator allocation modules.

Physics↗