Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “material analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Nuclear magnetic resonance probe head design for precision strain control

Here, we present the design and construction of an NMR probe to investigate single crystals under strain at cryogenic temperatures. The probe head incorporates a piezoelectric-based apparatus from Razorbill Instruments that enables both compressive and tensile strain tuning up to strain values on the order of 0.3% with a precision of 0.001%. 75 As NMR in BaFe 2 As 2 reveals large changes to the electric field gradient and indicates that the strain is homogeneous to within 16% over the volume of the NMR coil.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of electronic excitation in 150 keV Ni ion irradiation of metallic systems

We use the two-temperature model in molecular dynamic simulations of 150 keV Ni ion cascades in nickel and nickel-based alloys to investigate the effect of the energy exchange between the atomic and the electronic systems during the primary stages of radiation damage. We find that the electron-phonon interactions result in a smaller amount of defects and affect the cluster formation, resulting in smaller clusters. These results indicate that ignoring the local heating due to the electrons results in the overestimation of the amount of damage and the size of the defect clusters. A comparison of the average defect production to the Norgett-Robinson-Torrens (NRT) prediction over a range of energies is provided.

36 MATERIALS SCIENCE↗

Ion movement in thin Nafion films under an applied electric field

In this study, the electromechanical response of Nafion films with and without an ionic liquid (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) ([emim]Tf 2 N) additive were characterized under an applied electric field in situ using neutron reflectometry (NR) and voltage modulated atomic force microscopy (VM-AFM). NR showed that pure Nafion films exhibited no response under field strengths of ~0.18 V/μm, while VM-AFM measurements showed a minimal response at higher field strengths (~200 V/μm), which is ascribed to the residual water presence in the films. The addition of ionic liquid resulted in clear electroresponsiveness seen in both NR and VM-AFM. NR results indicated mass migration away from the cathodic interface driven by the [emim] + movement in the direction of the electric field. The lack of ionic liquid accumulation at the electrode interfaces contrasts the bulk electromechanical behavior of similar systems reported in the literature. VM-AFM measurements were able to resolve the relative contributions of the [emim] + cation and Tf 2 N - anion to film deformation by alternating the direction of the applied field and support the [emim] + dominant migration seen in the NR results. Lastly, the findings presented here emphasize the need for the nanoscale analysis of material properties of electroresponsive thin film systems and demonstrate the potential for probing electric field effects using in situ techniques.

36 MATERIALS SCIENCE↗

Observation of carbon fractionation in HE debris by large geometry secondary ion mass spectrometry

Detonation of high explosives (HE) is an exothermic process producing a variety of simple gaseous molecules (e.g. CO, CO 2 , N 2 , H 2 O) and solid carbon soot. The chemistry of formed carbon soot is influenced by the high pressures (P) and temperatures (T) induced by shock compression that occurs due to detonation. This can result in isotopic fractionation of the soot as the lighter 12 C is more likely to participate in reactions forming gaseous products, resulting in 13 C enriched particulate soot material. Isotopic analysis of HE soot is usually performed at the bulk level of an agglomerated sample, which gives an average value of HE derived soot and other bystander debris and can obscure trends among individual particles. To study C isotopic fractionation of HE debris at the individual particle level, we have used Large Geometry Secondary Ion Mass Spectrometry (LG-SIMS), which has the ability to deliver in-situ high precision and accuracy isotope ratios of individual particles. This allows for evaluating thousands of individual particles from HE detonations, providing isotopic data at the per particle level. HE debris particles from a variety of detonation conditions (P ranging from 25 – 85 GPa) have been measured by LG-SIMS showing a general trend of higher 13 C fractionation with increasing P.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Representing local atomic environment using descriptors based on local correlations

Statistical learning of material properties is an emerging topic of research and has been tremendously successful in areas such as representing complex energy landscapes as well as in technologically relevant areas, like identification of better catalysts and electronic materials. However, analysis of large data sets to efficiently learn characteristic features of a complex energy landscape, for example, depends on the ability of descriptors to effectively screen different local atomic environments. Thus, discovering appropriate descriptors of bulk or defect properties and the functional dependence of such properties on these descriptors remains a difficult and tedious process. To this end, we develop here a framework to generate descriptors based on many-body correlations that can effectively capture intrinsic geometric features of the local environment of an atom. These descriptors are based on the spectrum of two-body, three-body, four-body, and higher order correlations between an atom and its neighbors and are evaluated by calculating the corresponding two-body, three-body, and four-body overlap integrals. They are invariant to global translation, global rotation, reflection, and permutations of atomic indices. By systematically testing the ability to capture the local atomic environment, it is shown that the local correlation descriptors are able to successfully reconstruct structures containing 10-25 atoms which was previously not possible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Time-strain separability in medium-amplitude oscillatory shear

Here, we derive and study equations for the weakly nonlinear medium-amplitude oscillatory shear (MAOS) response of materials exhibiting time-strain separability. Results apply to constitutive models with arbitrary linear memory function $\textit{m}$(s) and for both viscoelastic liquids and viscoelastic solids. The derived equations serve as a reference to identify which models are time-strain separable (TSS) and which may appear separable but are not, in the weakly nonlinear limit. More importantly, we study how the linear viscoelastic (LVE) relaxation spectrum, H($_\tau$), affects the frequency dependence of the TSS MAOS material functions. Continuous relaxation spectra are considered that are associated with analytical functions (log-normal and asymmetric Lorentzian distributions), fractional mechanical models (Maxwell and Zener), and molecular theories (Rouse and Doi-Edwards). TSS MAOS signatures reveal much more than just the perturbation parameter A in the shear damping function small-strain expansion, $h(_γ) = 1 + \text{A}_γ$$^2 + \mathcal{O}(_γ$$^4)$. Specifically, the distribution of terminal relaxation times is significantly more apparent in the TSS MAOS functions than their LVE counterparts. We theoretically show that this occurs because TSS MAOS material functions are sensitive to higher-order moments of the relaxation spectrum, which leads to the definition of MAOS liquids. We also show the first examples of MAOS signatures that differ from the liquid-like terminal MAOS behavior predicted by the fourth-order fluid expansion. This occurs when higher moments of the relaxation spectrum are not finite. The famous corotational Maxwell model is a subset of our results here, for which A = -1/6, and any LVE relaxation spectrum could be used.

36 MATERIALS SCIENCE↗

Multiple monoenergetic gamma radiography (MMGR) with a compact superconducting cyclotron

Smuggling of special nuclear materials and nuclear devices through borders and ports of entry constitutes a major risk to global security. Technologies are needed to reliably screen the flow of commerce for the presence of high-Z materials such as uranium and plutonium. Here, we present an experimental proof-of-concept of a technique that uses inelastic (p,p') nuclear reactions to generate monoenergetic photons, which provide means to measure the areal density and the effective-Z (Z eff ) of an object with an accuracy surpassing that achieved by current methods. We use an ION-12 SC superconducting 12 MeV proton cyclotron to produce 4.4, 6.1, 6.9, and 7.1 MeV photons from a variety of nuclear reactions. Using these photons in a transmission mode, we show that we are able to accurately reconstruct the areal densities and Zeff of a test object. This methodology could enable mobile applications to screen commercial cargoes with high material specificity, providing a means of distinguishing common cargo materials from high-Z materials that include uranium and plutonium.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Instrument for in situ hard x-ray nanobeam characterization during epitaxial crystallization and materials transformations

Solid-phase epitaxy (SPE) and other three-dimensional epitaxial crystallization processes pose challenging structural and chemical characterization problems. The concentration of defects, the spatial distribution of elastic strain, and the chemical state of ions each vary with nanoscale characteristic length scales and depend sensitively on the gas environment and elastic boundary conditions during growth. The lateral or three-dimensional propagation of crystalline interfaces in SPE has nanoscale or submicrometer characteristic distances during typical crystallization times. Here, an in situ synchrotron hard x-ray instrument allows these features to be studied during deposition and crystallization using diffraction, resonant scattering, nanobeam and coherent diffraction imaging, and reflectivity. The instrument incorporates a compact deposition system allowing the use of short-working-distance x-ray focusing optics. Layers are deposited using radio-frequency magnetron sputtering and evaporation sources. The deposition system provides control of the gas atmosphere and sample temperature. The sample is positioned using a stable mechanical design to minimize vibration and drift and employs precise translation stages to enable nanobeam experiments. Results of in situ x-ray characterization of the amorphous thin film deposition process for a SrTiO 3 /BaTiO 3 multilayer illustrate implementation of this instrument.

47 OTHER INSTRUMENTATION↗

Multi-objective Bayesian optimization of ferroelectric materials with interfacial control for memory and energy storage applications

Optimization of materials’ performance for specific applications often requires balancing multiple aspects of materials’ functionality. Even for the cases where a generative physical model of material behavior is known and reliable, this often requires search over multidimensional function space to identify low-dimensional manifold corresponding to the required Pareto front. In this work, we introduce the multi-objective Bayesian optimization (MOBO) workflow for the ferroelectric/antiferroelectric performance optimization for memory and energy storage applications based on the numerical solution of the Ginzburg–Landau equation with electrochemical or semiconducting boundary conditions. MOBO is a low computational cost optimization tool for expensive multi-objective functions, where we update posterior surrogate Gaussian process models from prior evaluations and then select future evaluations from maximizing an acquisition function. Using the parameters for a prototype bulk antiferroelectric (PbZrO 3 ), we first develop a physics-driven decision tree of target functions from the loop structures. We further develop a physics-driven MOBO architecture to explore multidimensional parameter space and build Pareto-frontiers by maximizing two target functions jointly—energy storage and loss. This approach allows for rapid initial materials and device parameter selection for a given application and can be further expanded toward the active experiment setting. The associated notebooks provide both the tutorial on MOBO and allow us to reproduce the reported analyses and apply them to other systems (https://github.com/arpanbiswas52/MOBO_AFI_Supplements).

36 MATERIALS SCIENCE↗

Shock compression response of additively manufactured AlSi10Mg

We measured the Hugoniot, Hugoniot elastic limit (HEL), and spallation strength of laser powder bed fusion (LPBF) AlSi10Mg via uniaxial plate-impact experiments to stresses greater than 13 GPa. Despite its complex anisotropic microstructure, the LPBF AlSi10Mg did not exhibit significant orientation dependence or sample-to-sample variability in these measured quantities. We found that the Hugoniot response of the LPBF AlSi10Mg is similar to that of other Al-based alloys and is well approximated by a linear relationship: u s = 5.49 + 1.39u p . Additionally, the measured HELs ranged from 0.25 to 0.30 GPa and spallation strengths ranged from 1.16 to 1.45 GPa, consistent with values reported in other studies of LPBF AlSi10Mg and Al-based alloys. Furthermore, strain-rate and stress dependence of the spallation strength were also observed.

36 MATERIALS SCIENCE↗

Acoustic properties, elasticity, and equation of state of glycerol under pressure

Herein we employed high-pressure Brillouin scattering to study the pressure dependencies of acoustic modes of glycerol up to 14 GPa at 300 K. We observed longitudinal acoustic velocities and transverse acoustic velocities for the first time from 5 to 14 GPa. The results allow the determination of a complete set of elastic properties and an accurate determination of the pressure–volume (P–V) equation of state (EOS). EOS parameters, K 0 = 14.9 ± 1.8 GPa and K' 0 = 5.6 ± 0.5, were determined from fits to the data from ambient pressure to 14 GPa. Direct volume measurements of the P–V EOS are consistent with those determined by Brillouin scattering. A deviation from a Cauchy-like relationship for elastic properties was observed, and the pressure dependencies of the photoelastic constants and relaxation times were documented from 5 to 14 GPa. These results have broad implications for glass-forming liquids, viscoelastic theory, and mode coupling theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Acoustoelastic characterization of plates using zero group velocity Lamb modes

Acoustoelasticity, a characteristic of material anharmonicity, gives rise to a link between wave propagation velocity and the stress state in materials. Ultrasonic techniques to monitor this coupling, particularly with high sensitivity and in a noncontact manner, can have widespread application both in the quantification of applied and residual stress and in the characterization of nonlinear material behavior through measurement of higher order elastic constants. Here, we use a laser ultrasonic technique to excite and detect zero group velocity (ZGV) Lamb wave resonances in aluminum plates under uniaxial loading. A laser line source is used to excite these resonances at different orientations with respect to the applied load, and the signals are detected using an interferometer. The effects of stress and source orientation on ZGV resonance frequencies are validated using the theory of acoustoelastic Lamb wave propagation. In addition, a model-based inversion technique is used to extract Murnaghan's third-order elastic constants from measurements of the stress dependence of the first two ZGV modes generated parallel and perpendicular to the applied load. Laser generation and detection of ZGV resonances is shown to be an effective and powerful approach for the noncontact and nondestructive acoustoelastic characterization of elastic waveguides.

36 MATERIALS SCIENCE↗

Light scattering by V 4 O 7 film across the metal–insulator transition

The experimental study of the angle-resolved hemispherical light scattering by V 4 O 7 film within a broad temperature range across metal–insulator transition reveals complex structural reorganization of the film deposited on the c-cut sapphire crystal. The bidirectional scattering distribution function and the surface autocorrelation function were obtained from scattering data to visualize statistics of the spatially resolved contributions of optical inhomogeneities in normal and lateral directions to the surface. The measurements reveal an anisotropic surface roughness distribution due to the twinned domain structure, with significant anisotropy changes across the phase transition. The V 4 O 7 film deposited on sapphire leads to a polydomain structure, minimizing elastic strain energy with distinct multiscale distributions of surface domains. Near T c , the material shows the lowest roughness but the highest lateral disorder of the surface.

36 MATERIALS SCIENCE↗

A limit to strong shock behavior in the dynamic response of matter at pressure

Solids under high pressures experience a series of regimes, where their microstructure adapts to the applied compression and these key transitions are discussed in this paper. As strain increases, new forces emerge at extreme pressures. A previous study introduced the concept of the weak shock limit (WSL), at which the ambient theoretical shear strength is overcome. Above the WSL, further deformation under strong shock conditions results in electrons occupying higher energy levels as strain increases. As pressure rises further, shock melting occurs in the material and at around three times this melting pressure, the strong shock limit is reached where the driving physics under pressure switches, with electrons forced into higher energy states. This leads to significant reduction in their compressibility due to changes in electronic structure and developing electron degeneracy pressures. A derivation for conditions at this state is presented, which indicates that a dependence of the threshold pressure on the free electron number density defines the limit observed. This correlation suggests that ambient material moduli govern material compression up to nearly 50% strain. These observations show that models should account for different behaviors as dominant physics changes in each regime accessed as shock pressure increases.

36 MATERIALS SCIENCE↗

Optimizing ablator thickness for laser shock experiments

In laser shock experiments, a well-defined, flat-top shock wave at the ablator/sample interface is important for accurately probing material response under uniaxial strain compression. However, the relationship between the ablator thickness and the resulting shock wave characteristics is insufficiently understood, limiting the ability to design optimal experiments. To address this need, we conducted a systematic experimental study using a 100 J laser to shock-compress polyimide ablators to peak stresses ranging from 20.4 to 111.6 GPa. Laser interferometry diagnostics measured the transmitted wave profiles at the ablator/sample interface, consistently showing a single jump followed by a constant peak state before the arrival of release waves. Here, by analyzing shock transit time, flat-top duration, and stress, our results establish a framework for selecting ablator thickness to maximize the flat-top duration, improving the precision and reproducibility of laser shock experiments.

design of experiments↗

Quantitative Analysis of Ultralow-Density Materials Using Laboratory-Based Quasi-Monochromatic Radiography

The measurement of the density of materials, especially ultralow-density foams, is difficult in that the measurement must be precise and localizable. The density of the material is often governed by its cellular (i.e., porous) structure, and many techniques exist to create that structure. Often, the cellular structure can vary from one location within the material to another, and when at low densities (i.e., densities lower than ~500 mg/cm 3 ), it can vary due to shrinkage during syneresis, collapse under the weight of gravity, or gas/water vapor uptake. Quantifying this variation is important for a variety of applications, especially when used in plasma physics targets. Knowing the density and its variation across the sample is critical for experimental results to be accurately predicted by physics calculations and for modeling the results of the physics targets. The use of quasi-monochromatic radiography provides a means to image the two-dimensional (2-D) distribution of density variation within silica aerogel materials and to quantitatively measure that variation from sample to sample and lot to lot. For this work, two batches of silica aerogels with targeted densities of ~20 mg/cm 3 were created, one batch at Lawrence Livermore National Laboratory, and the other batch at Los Alamos National Laboratory. Outlined here is a quasi-monochromatic radiography system using various X-ray sources coupled to a doubly curved crystal optic and X-ray charge-coupled device camera to image and characterize these materials. It was found that measuring the density both gravimetrically and using quasi-monochromatic radiography were statistically identical, although the two batches were found to be slightly higher than their targeted density due to shrinkage. The radiography system also provided 2-D information as to the aerogel quality, i.e., presence of voids, chipped material, or inclusions.

36 MATERIALS SCIENCE↗

Integral analysis of the effect of material dimension and composition on tokamak neutronics *

Abstract The neutronics performance of a tokamak has been identified as an important factor in designing a fusion power plant. The design of the tokamak should not only meet operational parameters such as sufficient tritium breeding, but also safety parameters such as low structural material activation. This paper investigates the impacts of the neutronics metrics for the ARC-class tokamak, a compact tokamak with an immersion blanket, by perturbing the first five layers of structural material—first wall, inner vacuum vessel, coolant salt channel, neutron multiplier, and outer vacuum vessel. The goal of this work is to provide insight into shaping and scaling the flux on each layer to obtain optimized operational and safety metrics through quantification of the responses from each perturbation. Results show that increased first wall thickness can increase the tritium breeding ratio (TBR) in specific configurations with high 6 Li enrichments and that vacuum vessels decrease TBR for low- 6 Li enrichment configurations. It was also found that the neutron multiplier can either increase or decrease TBR depending on the configuration. The response of metrics to the change in layer thickness and enrichment also varies depending on the vacuum vessel material. The integral impacts of 6 Li enrichment, layer thicknesses, and vacuum vessel material choice are investigated and presented in this paper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗