Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “manipulators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Adaptive Cartesian coordinate control of space based robot manipulators

A Cartesian coordinate robot controller is presented for use when the mass properties of a load are unknown. The mass, center of mass, and moments of inertia of the end-effector are assumed unknown. All other inertial properties of the robot are assumed known. This knowledge of the parameters allows the control of the end-effector in a way similar to the use of reaction wheels to control the orientation of a satellite. This is the primary result of the controller. The basic method of the controller is similar to that used for terrestrial-based robot manipulators. The controller is demonstrated using a new simulation algorithm which is based on Hamilton's form of the equations of motion.

Walker, Michael W.↗

Spatial operator factorization and inversion of the manipulator mass matrix

This paper advances two linear operator factorizations of the manipulator mass matrix. Embedded in the factorizations are many of the techniques that are regarded as very efficient computational solutions to inverse and forward dynamics problems. The operator factorizations provide a high-level architectural understanding of the mass matrix and its inverse, which is not visible in the detailed algorithms. They also lead to a new approach to the development of computer programs or organize complexity in robot dynamics.

Rodriguez, Guillermo↗

Neural joint control for Space Shuttle Remote Manipulator System

Neural networks are being used to control a robot arm in a telerobotic operation. The concept uses neural networks for both joint and inverse kinematics in a robotic control application. An upper level neural network is trained to learn inverse kinematic mappings. The output, a trajectory, is then fed to the Decentralized Adaptive Joint Controllers. This neural network implementation has shown that the controlled arm recovers from unexpected payload changes while following the reference trajectory. The neural network-based decentralized joint controller is faster, more robust and efficient than conventional approaches. Implementations of this architecture are discussed that would relax assumptions about dynamics, obstacles, and heavy loads. This system is being developed to use with the Space Shuttle Remote Manipulator System.

Atkins, Mark A.↗

Motion and force control of multiple robotic manipulators

This paper addresses the motion and force control problem of multiple robot arms manipulating a cooperatively held object. A general control paradigm is introduced which decouples the motion and force control problems. For motion control, different control strategies are constructed based on the variables used as the control input in the controller design. There are three natural choices; acceleration of a generalized coordinate, arm tip force vectors, and the joint torques. The first two choices require full model information but produce simple models for the control design problem. The last choice results in a class of relatively model independent control laws by exploiting the Hamiltonian structure of the open loop system. The motion control only determines the joint torque to within a manifold, due to the multiple-arm kinematic constraint. To resolve the nonuniqueness of the joint torques, two methods are introduced. If the arm and object models are available, an optimization can be performed to best allocate the desired and effector control force to the joint actuators. The other possibility is to control the internal force about some set point. It is shown that effective force regulation can be achieved even if little model information is available.

Wen, John T.↗

Experimental testbed for cooperative robotic manipulators

The robotic testbed facility within Rensselaer's Center for Intelligent Robotic Systems for Space Exploration consists of two PUMA robot manipulators, each mounted on a moving platform. Each platform has a tilt and rotate capability and can move along a two rail linear track. One purpose of this system is to demonstrate the coordination of two arms in relative motion to each other. The system is also useful for investigating the integration problems that occur in an environment that is heavily dependent upon the acquisition, transmission, and processing of data in the form of information, knowledge, and control commands.

Desrochers, A.↗

Minimum jerk trajectory planning for robotic manipulators

It has been experimentally verified that the jerk of the desired trajectory adversely affects the performance of the tracking control algorithms for robotic manipulators. In this paper, the reasons behind this effect are investigated, and an optimization problem that minimizes joint jerk over a prespecified Cartesian space trajectory is stated. The necessary conditions are derived, and a numerical algorithm is presented.

Kyriakopoulos, K. J.↗

Generating Smooth Motions For Robotic Manipulators

In improved method for generating trajectory of robotic manipulator, each straight-line segment of trajectory composed of constant-velocity main portion sandwiched between smooth acceleration at start and smooth deceleration at finish. Algorithm implementing method computes velocity in each accelerating portion as sinusoidal function of position along line. This motion chosen for two reasons: closely approximates motion of human hand along straight-line trajectory, and provides very smooth transitions between constant-velocity portion and accelerated and decelerational end portions.

Bejczy, Antal K.↗

Conjugate-Gradient Algorithms For Dynamics Of Manipulators

Algorithms for serial and parallel computation of forward dynamics of multiple-link robotic manipulators by conjugate-gradient method developed. Parallel algorithms have potential for speedup of computations on multiple linked, specialized processors implemented in very-large-scale integrated circuits. Such processors used to stimulate dynamics, possibly faster than in real time, for purposes of planning and control.

Fijany, Amir↗

Extended-Task-Space Control For Robotic Manipulators

Extended-task-space concept provides unified approach for control of both redundant and nonredundant manipulators: theoretical framework for complete description of set of mechanism commands in terms of task-space commands, and singularity-avoidance scheme providing robustness at and near singular points of workspace while not degrading performance in nonsingular regions.

Backes, Paul G.↗

Parallel Computation Of Forward Dynamics Of Manipulators

Report presents parallel algorithms and special parallel architecture for computation of forward dynamics of robotics manipulators. Products of effort to find best method of parallel computation to achieve required computational efficiency. Significant speedup of computation anticipated as well as cost reduction.

Fijany, Amir↗

Numerical analysis of right-half plane zeros for a single-link manipulator

The purpose of this research is to further develop an understanding of how nonminimum phase zero location is affected by structural link design. As the demand for light-weight robots that can operate in a large workspace increases, the structural flexibility of the links become more of an issue in controls problems. When the objective is to accurately position the tip while the robot is actuated at the base, the system is nonminimum phase. One important characteristic of nonminimum phase systems is system zeros in the right half of the Laplace plane. The ability to pick the location of these nonminimum phase zeros would give the designer a new freedom similar to pole placement. The research targets a single-link manipulator operating in the horizontal plane and modeled as a Euler-Bernoulli beam with pinned-free end conditions. Using transfer matrix theory, one can consider link designs that have variable cross-sections along the length of the beam. A FORTRAN program was developed to determine the location of poles and zeros given the system model. The program was used to confirm previous research on nonminimum phase systems, and develop a relationship for designing linearly tapered links. The method allows the designer to choose the location of the first pole and zero and then defines the appropriate taper to match the desired locations. With the pole and zero location fixes, the designer can independently change the link's moment of inertia about its axis of rotation by adjusting the height of the beam. These results can be applied to inverse dynamic algorithms currently under development at Georgia Tech.

Girvin, Douglas Lynn↗

A neuro-collision avoidance strategy for robot manipulators

The area of collision avoidance and path planning in robotics has received much attention in the research community. Our study centers on a combination of an artificial neural network paradigm with a motion planning strategy that insures safe motion of the Articulated Two-Link Arm with Scissor Hand System relative to an object. Whenever an obstacle is encountered, the arm attempts to slide along the obstacle surface, thereby avoiding collision by means of the local tangent strategy and its artificial neural network implementation. This combination compensates the inverse kinematics of a robot manipulator. Simulation results indicate that a neuro-collision avoidance strategy can be achieved by means of a learning local tangent method.

Onema, Joel P.↗

Manipulation strategies for massive space payloads

The industrial and environmental applications for robots with a relatively large workspace has increased significantly in the last few years. To accommodate the demands, the manipulator is usually designed with long, lightweight links that are inherently flexible. Ongoing research at Georgia Tech into the behavior and design of these flexible links is discussed.

Book, Wayne J.↗

Experimental verification of modified command shaping using a flexible manipulator

A brief discussion introduces the original input shaping method applied to a system with varying parameters. A change in parameters causes a vibration in the system and a modified command shaping technique is created to eliminate this unwanted motion. Using a two degree of freedom (DOF) flexible manipulator, experiments are conducted by varying perturbations to input trajectories to compare the modified method to a previously used adaptive proportional plus derivative (P.D.) control method. The control scheme that produces the smaller magnitude of resonant vibration at the first natural frequency of the robot is considered the more effective control method.

Magee, David P.↗

Controlled motion in an elastic world. Research project: Manipulation strategies for massive space payloads

The flexibility of the drives and structures of controlled motion systems are presented as an obstacle to be overcome in the design of high performance motion systems, particularly manipulator arms. The task and the measure of performance to be applied determine the technology appropriate to overcome this obstacle. Included in the technologies proposed are control algorithms (feedback and feed forward), passive damping enhancement, operational strategies, and structural design. Modeling of the distributed, nonlinear system is difficult, and alternative approaches are discussed. The author presents personal perspectives on the history, status, and future directions in this area.

Book, Wayne J.↗

Inertial-space disturbance rejection for robotic manipulators

The disturbance rejection control problem for a 6-DOF (degree of freedom) PUMA manipulator mounted on a 3-DOF platform is investigated. A control algorithm is designed to track the desired position and attitude of the end-effector in inertial space, subject to unknown disturbances in the platform axes. Conditions for the stability of the closed-loop system are derived. The performance of the controller is compared for step, sinusoidal, and random disturbances in the platform rotational axis and in the neighborhood of kinematic singularities.

Holt, Kevin↗

Kinematic analysis of the ARID manipulator

The kinematic structure of the ARID manipulator lends itself to simple forward and inverse kinematics analysis. The purpose of this paper is to fully document and verify an existing analysis. The symbolic software package MATHEMATICA was used to produce and verify the equations presented here. In the analysis to follow, the standard Devenit-Hartenberg kinematic parameters of the ARID were employed.

Doty, Keith L↗